Yunmai Technology W1701 YUNMAI FIT HR User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3681780
Application ID	g+fxx30FZ2IDRjtJktOCfQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	67.91kB (848851 bits)
Date Submitted	2017-12-18 00:00:00
Date Available	2017-12-18 00:00:00
Creation Date	2017-11-17 14:00:56
Producing Software	Microsoft? Office Word 2007
Document Lastmod	2017-12-13 18:51:51
Document Title	User Manual
Document Creator	Microsoft? Office Word 2007
Document Author:	Microsoft

Safety and Product Information
It may result in death or serious injury in case of failure to avoid the following potential
dangerous situations.
Warnings
Health Warning
•Please consult your doctor before starting or changing your exercise program. If you
wear a pacemaker or other electronic device that is implanted into your body, consult
your doctor before using YUNMAI Fit HR.
•YUNMAI Fit HR and other YUNMAI accessories are all consumer devices but not
medical equipment, and may be disturbed by some external factors, so the heart rate
readings are only for reference. YUNMAI shall not be responsible for the
consequences of any erroneous readings.
Battery Warning
The life of the lithium-ion battery in the devices may be shortened or equipment
damage, fire, chemical burns, electrolyte leakage and/or risk of injury may be caused
in case of not following the guidelines below.
• Please do not make the equipment exposed to a heat source or at a high
temperature.
• Please do not make the device or battery punctured or incinerated.
• Please store the device at a temperature range of 0°C-25°C in case of a longtime
storage.
•Please do not operate the device at temperatures beyond -10°-60°C.
• Please do not charge the device at temperatures beyond 0°-40°C.
• Please consult the local waste disposal department in accordance with applicable
local regulations when handling the device/battery.
Limited Warranty
The YUNMAI product is guaranteed for one year from the date of purchase without
any defects in material or manufacturing process. During this period, YUNMAI will
overhaul or replace the parts that fail under normal use as appropriate. This warranty
does not apply to:
• Surface damage, such as scratches, dents, and depression.
•Consumables, such as batteries, except for the damage caused by material or
process defects.
• Damage caused by accidents, abuse, misuse, water inflow, flooding, fire or external
factors.
• Damage caused by the overhaul from non YUNMAI authorized service personnel.
• Damage caused by the modification or transformation of product without written
consent of YUNMAI.
In addition, YUNMAI reserves the right to refuse warranty applications for products
and services that have been acquired and/or used in violation of any state law.
Warranty and remedies herein are exclusive, and replace all other expressed or
implied or statutory warranty conditions, including any liability derived from the
merchantable and applicable warranty of any commodity under some special purpose,
laws and regulations or other circumstances. This warranty provides you with specific
legal rights, which may vary from region to region. YUNMAI shall not hold liable for
any accidental, particular, indirect or consequential damage (which may originate from
use, misuse, unfamiliar use, or product defects). Some areas do not allow exclusion
of incidental or consequential damages, so the above limitations may not apply to you.
YUNMAI reserves the right to overhaul or replace equipment or software (new
products or newly overhauled replacement products). This is the only and exclusive
remedy for any breach of the warranty. Please contact the local YUNMAI authorized
dealer or call YUNMAI customer service: 400-990-1092 when applying for warranty
service. Please pack the equipment properly and enclose a copy of the original
purchase invoice as a necessary proof of purchase for the warranty and overhaul
application.
Appearance Presentation
①
Display screen Display screen, for browsing device function and data page.
②
Touch button
③
Heart rate
converter
Press the YUNMAI touch button to switch equipment
function of time, heart rate, pedometer etc.
Used to measure heart rate
④
Wristband
bracelet
Worn on the wrist.
First Activation
Pull the bracelet out and connect the bracelet USB interface to your computer's USB
socket or outlets with USB interface to activate the screen by charging for the first time.
Wearable Device
You can wear YUNMAI Fit HR on your left wrist or right wrist. Attention: please do not
damage the heart rate sensor behind the device.
(Wearing sketch for left hand)
Even under the ideal conditions, YUNMAI Fit HR cannot guarantee an accurate and
reliable detection of everyone’s heart rate each time. For few wearers, it is possible to
obtain no heart rate for various reasons. However, you can help YUNMAI Fit HR
achieve the most consistent and reliable readings with some attempts.
Just fine
Too loose
If the YUNMAI Fit HR will slide on your The YUNMAI Fit HR should be comfortably
wrist, or sensor cannot read the heart attached to your wrist.
rate, try to tighten the strap slightly.
Download YUNMAI APP
You can download the YUNMAI Fit HR official APP by scanning the following QR
code.
APP downloaded via other channels may be unusable. Before pairing with your cell
phone, make sure your cell phone meets the following requirements:
• IPhone5s or above iOS 8.
• Android 4.3 or above and supports Bluetooth 4.0.
Scan to download the

The functions and contents are only available for the purchaser of this machine, and
the marked words or pictures are only for the auxiliary use.
Pairing and Setting
Turn on your phone Bluetooth, download and open the YUNMAI APP. Click on the
[Me] icon, then the [Device] icon.
① Open “My Device” and find the ② Please ensure that the screen is
corresponding bracelet.
bright and the bracelet is away from
other ones after enterig the search
page.
③ Click the "YUNMAI" touch button to ⑤ End of the binding.
confirm binding the device.
Note: cellphone Bluetooth setting is not required for YUNMAI Fit HR, direct Bluetooth
pairing via YUNMAI APP.
Unbinding
Open the “my device” and find the bound bracelet.
IOS Unbound: 1. Enter the bracelet setup 2. Enter the mobile phone setup, open
page, select “Unpair”, and click [OK] to the Bluetooth, find the YUNMAI Fit HR
unbound device.
and click the icon [ ]. Ignore this device.
Android unbind: enter the bracelet
setup page, select “Unpair” and click [OK]
to unbound device.
Icon Functions
Display the current time and date. It will automatically adjust the time
when the device is synchronized with the phone.
Display your current heart rate. Operation: to measure the heart rate
with the current page stationary for several seconds.
Display your current day walking distance.
Display the total day consumtion of calories, including the basal
metabolic rates and calories consumed by activities.
Monitor your daily activity time.
Alarm mode
Step counting mode
Sedentary mode, regular reminder
Current usage of power
Step Count and Goal
A target step is generated by YUNMAI Fit HR based on the activity you set, and the
device displays the progress of your target when walking. You will be rewarded when
you achieve your goals, which keeps your energy alive every day.
Start of count
Real-time Heart Rate
Click on the "YUNMAI" touch button, move to the heart rate function page, make sure
the heart rate sensor fits the wrist, and it can measure the heart rate data after 3
seconds' standing.
Current heart rate
Sleep Monitoring
The equipment will test the sleep status when you are asleep, which includes the
counting of total sleep hours and sleep quality. The sleep quality data is available in
YUNMAI APP.
Note: The actual listed products shall prevail for the functional content outlined in this
page, which may be changed without notice.
Do Not Disturb
You can use this mode during breaks or movies to turn off the vibration mode.
Note: The device will automatically enter the Do Not Disturb mode within the set time
in the YUNMAI APP account when the " " appears.
Historical Record
7 days of activity data and heart rate monitoring data will be continued stored in the
device, and can be synchronized to the YUNMAI APP account for a long-term
preservation.
Bluetooth Connection
The following function can be set in your YUNMAI APP after binding the device:
Alarm clock: set the time and frequency of alarm clock for your device.
Display: set the contents need to be displayed on the equipment screen page or
vertically and horizontally display data.
Active time monitoring: turn on or close the daily activity monitoring.
Notification: turn on or close the intelligent notification.
Sedentary reminder: turn on or close the sedentary reminder.
Heart rate monitoring: turn on or close the heart rate monitoring or continuous heart
rate.
Wrist lift recognition: turn on or close the wrist lift reminder.
Synchronous Data
Data can be synchronized regularly through the device to the YUNMAI APP, and also
to the phone manually at any time.
1. Keep the distance between the device and the phone within 2 meters, and turn on
Bluetooth.
2. Turn on the YUNMAI APP to automatically synchronize data to the phone.
Charging Your Device
Note: in order to prevent the charging interface from corroding, please ensure that the
metal interface of the device and charger and the surrounding area are dry before
charging.
1. Pull the bracelet out and connect the bracelet USB interface to your computer's
USB socket or outlets with USB interface.
2. Fully charge the device.
Note: Put USB interface of bracelet with copper alloy contact right into the USB socket
for charging.
Equipment Maintenance
• No strenuous vibration or violent use on the device, which may result in service
life declining.
• Do not press any buttons of device under water.
• Do not clean the device with sharp or stiff things.
• Do not operate the screen with sharp or stiff things.
• No chemistry cleanser or dissolve used for cleaning, which may damage plastic
components.
•
•
•
Please rinse it entirely after contact with chlorine, saline water, sun cream,
cosmetics, ethyl alcohol or other stimulating chemicals.
Do not store the device in extreme temperatures for a long time, which may result
in the permanent damage.
Scrub by using wet towel or hot towel, and then the dry towel.
IP 67 Protection Level
The standard, raised by European Committee for Electrotechnical Standardization,
describes classified system for enclosure protection class of electrical equipment,
which is divided into many kinds that can quickly and conveniently define protection
class of the products.
IP code: enclosure protection class
6. Dust imprisonment: Dust can’t enter into the device, whose diameter makes it
unable to enter the enclosure.
7. Anti-short soak: At NPT, it won’t make a harmful effect on the enclosure while it is
shortly soaked in 1M-deeped water.
Important Explanation
Measured data of YUNMAI Fit HR is for reference only, but not as medical advices.
Common Problems
You can try the following methods if the heart rate data is wrong or not displayed.
• Wash and wipe your wrist up before wearing it.
• Don’t smear sun cream while wearing.
• Wear it on the carpus of your wrist in a tight and comfortable manner.
• Warm up for 5-10 minutes to get heart rate data before activities.
• Flush the device with clean water after activity each time.
Is the battery used too short?
You can lengthen battery life in the following methods if the battery life is too short.
• Please close Bluetooth wireless transmission if not connect.
• Stop heart rate push.
• Close optical heart rate sensor.
Failure to search the bracelet while pairing?
• Please confirm whether the bracelet is activated.
• Please confirm that Bluetooth on your phone has turned on, while the phone is
“within the scope” of pairing.
• Please ensure that the spacing between bracelet and mobile phone is not greater
than 0.5m, and when the pairing is finished, please check whether there’s battery
for the bracelet in 10 meters with range of Bluetooth communication, and contact
us if such problem is not resolved.
Occasional Bluetooth connection failure?
•
If the Bluetooth can’t connect occasionally, iOS phone should turn on Bluetooth in
setting, ignore binding bracelet device, and re-open YUNMAI APP for pairing.
Bluetooth service of some phones will show abnormality sometimes, it usually can
be solved after reopening the Bluetooth or restarting the phone.
•
How to update bracelet firmware?
• Connect bracelet with phone, enter “Me” in YUNMAI APP, click “Device”, and
choose “firmware upgrade”.
Appendix
Fitness goals
It helps you know the test and improvement of heart rate zones for your fitness by
understanding and using the following principles.
• Your heart rate situation is a good test method for high strength training.
• It helps to improve cardiovascular capacity and strength for training in fixed heart
rate zones.
• It will prevent you from excessive training and decrease possibility of injury if you
have knowledge of heart rate zone.
If you know your max heart rate, you can decide the best heart rate zone to your
fitness goal by checking the computation sheet of heart rate zone. If you don’t know it,
you can inquire it online as some fitness center will also provide test item of max heart
rate. The HRmax is defaulted as 220 minus your age.
Zone HRmax％
Self-feeling
Benefits
50-69%
70-84%
Over 85%
Confortable and relaxed, low Improve general basic training,
cardiovascular load, and a recovery capacity and metabolism.
bit deep breath.
Rhythmed stride and steadily Improve genearal fitness training
controlled rapid breath.
level, tolerance ability for medium
level training and training efficiency.
Failure to maintain the body The maximal expending of breath
and feel very tired in and muscle or close to the max.
breathing and muscle.
Toxic and harmful substance introduction of electronic information products
Conponent
Toxic and harmful substance or element
name
Pb
Hg
Cd
Cr6+
PBB
PBDE
Bracelet
body
Battery
〇
〇
〇
〇
〇
〇
〇
〇
〇
〇
〇
Wrist strap
〇
〇
〇
〇
〇
〇
Wrist strap
buckle
〇
〇
〇
〇
〇
〇
〇: It means the content of toxic and harmful substance in all homogeneous material
of the component is less than that stipulated by SJ/T11363-2006.
X: It means the content of toxic and harmful substance in at least one homogeneous
material of the component exceeds the value specified in SJ/T11363-2006.
YUNMAI Fit HR bracelet body and wrist strap both use environmental and safe
material. Besides, Cooper alloy contact for USB charging contains trace amount of Pb,
as there is no mature technology which can replace or reduce the Pb content in
cooper and cooper alloy. On the whole, the product conforms to environmental
requirements of EU RoHS.
This product conforms to the EU RoHS standard, refers to the IEC 62321 and
the European Union RoHS code 2011 /65/EU and its revised codes.
FCC ID
FCC ID: XXX-XXXX
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that
may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Product information
Product name YUNMAI Fit HR
Model
D1701NA
Main control Nordic
chip
Sensor: Kionix
Heart rate sensor: Silicon labs Si 1142
Wireless bluetooth 4.0
transmissio
Bracelet TPU
material
Strap size 240X16X10mm
Weight: 18g
Battery 45mAh
capacity:
Battery Polymer lithium battery
type:
Screen 0.86 inch OLED display screen
size
Working voltage 3.6-4.2V
Step
calculation 0-99999 steps
range
Distance display 0-9999km
Calorie: 0-9999 kcal
Time display: 12/24 hour
IP Grade
IP67
Stand-by time
10 days
Charging time
about 1-2 hours
Charging methods
USB
Packaging: standard packing, smart
bracelet scraps*2 and instruction
manual.
Please read the instruction manual carefully before using.
Get more information from the official website: www.iyunmai.com or call at
+86-755-8671-6230.
Official We-chat: yunmaihaoqing
Official MicroBlog:◎云麦好轻
Manufacturer: Shenzhen Yunmai Technology Co., Ltd.
Address: Room 2201, Building B, Qianhai Yangguang Kechuang Center, Nanshan
District, Shenzhen.
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
NOTE 1: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment.
NOTE 2: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure
condition without restriction.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Tagged PDF                      : No
XMP Toolkit                     : 3.1-702
Create Date                     : 2017:11:17 14:00:56+08:00
Creator Tool                    : Microsoft? Office Word 2007
Modify Date                     : 2017:12:13 18:51:51+08:00
Metadata Date                   : 2017:12:13 18:51:51+08:00
Format                          : application/pdf
Creator                         : Microsoft
Producer                        : Microsoft? Office Word 2007
Document ID                     : uuid:fd581ae2-ecf1-4c3e-ba95-6372b74a96cb
Instance ID                     : uuid:f66c51c5-ae6f-4d80-85a8-fc9d6f5d165b
Has XFA                         : No
Page Count                      : 16
Language                        : zh-CN
Author                          : Microsoft

EXIF Metadata provided by EXIF.tools