ZAIXING ELECTRONIC 82007 GEMMY OUTDOOR LIGHT SHOW TREE WIRELESS REMOTE User Manual IMPORTANT SAFETY INSTRUCTIONS
ZAIXING ELECTRONIC (SHENZHEN) Co. LTD GEMMY OUTDOOR LIGHT SHOW TREE WIRELESS REMOTE IMPORTANT SAFETY INSTRUCTIONS
Users Manual
Congratulations! You're the proud owner of a Gemmy Incredible
Light Show. Please read over the directions carefully before
using your Gemmy Incredible Light Show.
CAUTION: Do not attempt to assemble or operate your Incredible
Light Show during unusually strong winds. If it becomes too
windy for safe operation, please disassemble your Incredible
Light Show and bring indoors until conditions improve.
Remove all plastic fasteners and tags. These are part of the
packaging and should be discarded.
Contents: [SHOW DIAGRAMS OF EACH ITEM]
Base 1pc
Base Screws 4pcs
Incredible Light Show (collapsed) 1pc
Inner Poles - separated 3pcs
Control Box / Speaker Hook 1pc
Base Anchor Stakes 4pcs
Control Box 1pc
Speaker 1pc
Nylon Tethers 4pcs
Tether Stakes 4pcs
Wireless Remote 1pc
AAA Batteries 3pcs
AC Adapter 1pc
Input: 120V – 60Hz 270mA
Output: 24V – 20VA
Assembly Instructions:
1. Remove contents from packaging. Lay out Base in a clear
and flat area.
2. Insert the small Base Anchor Stakes through the holes
within the bottom of the Base and into the ground.
3. Assemble Inner Poles by sliding the ends into the provided
shafts to create one long Inner Pole.
4. Turn the collapsed Incredible Light Show on its side and
insert the Inner Pole through all three center holes and
into slot under the star at the top of the tree.
5. Place the Inner Poles thru the Incredible Light Show to
extend it to full height. Carefully lift the Incredible
Light Show upright and set into anchored Base. Please note
this action may require 2 persons.
1
6. Secure Inner Pole to base by inserting Base Screws into the
provided holes. Tighten Base Screws to create a tight, snug
fit so that the Incredible Light Show stands upright and
does not lean.
2
7. Attach the Hook onto the center pole. We recommend you
place the Control Box/Speaker Hook at the top of the lowest
pole. Tighten screws to secure the hook on the pole.
8. Attach the Speaker by hanging it to the Inner Pole facing
out. Close the clasp on the back which secures the speaker
onto the Inner Pole.
9. Attach the Control Box by hanging it to the Inner Pole,
opposite the speaker. Close the clasp on the back which
secures the Control box onto the Inner Pole.
10. Connect the Speaker cable to the cable coming from the
Control box.
11. Attach the hooks located at the end of the Nylon Tethers to
the ridge of the plastic Star mount at the top of the
Incredible Light Show. Attach other end of Nylon Tethers to
the Tether Stakes. Drive Tether Stakes into ground so that
the Nylon Tethers are taut.
12. Attached the AC adapter cord as shown. Then plug the UL
Listed adapter into the power source. This power unit is
Intended to be correctly oriented in vertical or floor mount
position.
13. Place the 3xAAA batteries inside the remote control.
14. Resetting the Remote Control -Before activating your
Incredible Light show you must reset both the Control box
and the Remote Control. Follow the easy steps listed below.
a. Press the reset button on the Control Box. This will
activate a flashing LED for approximately 2 minutes.
b. During this time period, use a ball point pen or other
blunt object to press the reset button located on the back
of the remote control.
c. Once these actions have been taken, you may now proceed to
play your Incredible Light Show.
Do not attempt to operate your Incredible Light show in the
following conditions:
1 During inclement weather conditions such as heavy
rains and wind storms, store the product indoors.
2 Operation of your Incredible Light Show during extreme
weather conditions is not recommended.
Storage: Do not discard box as it should be used for storage.
Keep your disassembled Incredible Light Show and return all
parts to the original packaging, if possible. Store in a cool,
dry location.
Trouble Shooting Checklist:
If your Incredible Light Show is not operating, the problem may
be:
1. The power source is disabled or the cord is unplugged.
2. The batteries within the Wireless Remote may need to be
replaced.
3. The reset buttons have not been reset properly. Follow
instructions above on how to reset the Control Box and
Remote Control.
Frequently Asked Questions (FAQ's)
1. Can I leave my Incredible Light Show running overnight?
We recommend that you turn off while unattended. Extended
use beyond 8 hours will not damage your Incredible Light
Show.
2. How much electricity does an Incredible Light Show consume?
It uses about as much energy as two 100-wall light bulbs.
3. What is the best way to store my Incredible Light Show?
Store dry in a bag, box or other storage container and keep
in a cool, dry location.
4. My area is prone to unusually windy conditions, will this
affect my Incredible Light Show?
In order to prevent damage, we suggest you keep the
Incredible Light Show protected from high winds by simply
disassembling the item and bringing it indoors until wind
conditions improve.
5. What if it is raining or snowing? Will this affect my
Incredible Light Show?
Operation of your Incredible Light Show during light
weather conditions, such as a gentle rain or snowfall is
fine. However, operation of your Incredible Light Show
during extreme weather conditions, such as heavy snow, rain
or windstorms is not recommended as the unit may become
over-weighted or could fall over, thus damaging the unit.
CAUTION: Operation of your Incredible Light Show during extreme
weather conditions is not recommended.
3
Warning!
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause
undesired operation.
These instructions relate to the following item numbers:
11600, 11607, 11624, 11625, 77002, 77003, 77005, 77006, 77008, 77010
Gemmy makes more fun and festive products than you can imagine!
Check out our website at WWW.GEMMY.COM to see for yourself!
WARNING:
This product contains chemicals, including lead, known to the
State of California to cause cancer, and birth defects or other
reproductive harm.
Wash hands after handling.
Patent pending.
© Gemmy 2007
Printed in China Made in China
117 Wrangler Dr.
Co
ppell, TX 75019
Customer Service: 1-800-231-6879, 9:00am to 5:00pm
Central Standard Time or Visit us at www.gemmy.com
4
FUNCTIONALITY OF WIRELESS REMOTE
EFFECTS: Display Light
Show without music.
SONG LOOP: Plays Light
Show and all songs
continuously.
LIGHT COLOR: Change the
light colors to any in
the list below.
VOLUME: Make music
louder or softer; the
lowest setting turns
the volume off.
THREE-WAY TOGGLE SWITCH: when set
to ‘SENSOR’, the Light Show will
play one song with flashing
lights, then stop until the sensor
is reactivated. If no activation
occurs during the Sensor mode, it
will default to the ‘Effects’ mode
until reactivated. No other
functions are available in
‘SENSOR’ mode.
When set to ‘ON’, the Light Show
is ready to play any option you
choose between Song, Effects,
Light Colors and Song Loop.
LIGHT COLORS LIST
Each press of the ‘LIGHT COLORS’
button clicks to the next option:
1. Red
2. White
3. Green
4. Blue
5. Light Blue
6. Pink
7. Amber
8. Rainbow (Red, Green, Blue,
Gold and White stripes)
9. Candy Cane (Red and White
alternating stripes)
10. Red and Green alternating
stripes
SONG: Plays Light
Show and One song
once. Press again to
hear the next song
© Gemmy 2007 Printed in China
Made in China
5