ZEGO ELECTRONIC 12TX Controller of Flip Flop Drone User Manual
ZEGO ELECTRONIC COMPANY LIMITED Controller of Flip Flop Drone Users Manual
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3057786 |
| Application ID | Zrbww7Fs3Oh5CWL6YgtEOg== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 162.91kB (2036381 bits) |
| Date Submitted | 2016-07-11 00:00:00 |
| Date Available | 2016-07-11 00:00:00 |
| Creation Date | 2016-07-05 16:33:46 |
| Producing Software | Adobe PDF Library 9.0 |
| Document Lastmod | 2016-07-05 16:33:51 |
| Document Title | Users Manual |
| Document Creator | Adobe InDesign CS4 (6.0) |
6001438 User’s Guide Age 12+ flip flop stunt Drone 6001438_PM_En_for inspection printing.indd 1 7/5/2016 4:33:47 PM Contents Features............................................................................................. 3 Package Contents............................................................................. 3 Specifications.................................................................................... 3 Fly Safely............................................................................................ 3 Charge the Drone Battery................................................................ 4 Lithium Battery Notes...............................................................................................4 Recycle Rechargeable Batteries............................................................................4 Install Batteries in the Remote Control........................................... 4 Battery Notes...............................................................................................................5 About Expert/ Easy Modes (Ex/Ez)................................................. 5 Pairing................................................................................................. 5 Remote Control Overview............................................................... 6 Fly Your Drone................................................................................... 8 Land Your Drone................................................................................ 8 Perform Flip Stunts........................................................................... 8 Fly in "Headless" Mode...................................................................... 9 Replace Damaged Propellers......................................................... 10 Troubleshooting.............................................................................. 10 Drone does not respond........................................................................................ 10 Drone difficult to control........................................................................................ 10 Drone swerves or moves erratically before taking off.................................. 10 Trim Your Drone........................................................................................................ 11 FCC Information.............................................................................. 12 Limited Warranty............................................................................. 12 CHOKING HAZARD! Small parts. Not for children under 3 years. 6001438_PM_En_for inspection printing.indd 2 7/5/2016 4:33:47 PM We hope you enjoy your Flip Flop Stunt Drone from RadioShack. Congratulations! No FAA Registration is required for this drone. Please read this user’s guide before setting up and using your drone. Features •• •• •• •• 6-axis super stabilizing control system 180° flip stunt to fly your drone upside down, plus 360° flip stunt mode Easy (Ez) and Expert (Ex) play modes "Headless" mode for easy navigation, flies true north regardless of the drone's head direction Package Contents •• •• •• •• Flip Flop Stunt Drone Remote Control • USB Charging Cable Spare Propellers (4) • User’s Guide 3.7V, 390mAh Lithium-polymer battery Specifications Power......................................................................................................................................... Drone........................................................ 3.7V, 390mAh lithium polymer battery Remote Control............................................................................. 4 × AAA batteries Control Distance.......................................................................................120 ft. (36.5m) Specifications are subject to change and improvement without notice. Actual product may vary from the images found in this document. Fly Safely •• Do not fly the drone near or at other people or animals. •• Do not fly your drone where emergency responders are working, or emergency aircraft are operating. •• When flying outdoors, keep the drone away from power lines, trees, weeds, and water. •• Do not fly your drone over private property where you are not welcomed. •• When flying indoors, keep the drone away from walls, air conditioning, air vents, fans, breakable objects, and other obstacles. •• Keep eyes, hands, hair, and loose clothing away from moving propellers. •• Adult supervision is recommended at all times. 6001438_PM_En_for inspection printing.indd 3 7/5/2016 4:33:47 PM Charge the Drone Battery Make sure you use the supplied battery and battery charging cable, or one of the same type: 3.7 V, 390mAH lithium polymer. 1. Use the USB charging cable to connect the battery to a USB power source. The LED on the USB connector lights red during charging, and turns off when charging is complete. A full charge takes about 60 minutes. A fully charged battery provides up to 5 minutes of flight and camera time. LED 2. After charging, unplug the USB charging cable. Do not attempt to overcharge the battery. 3. To install the battery, match and plug the two ends of the white battery connectors. They only fit one way, so do not use force. Neatly slot the battery and cables into the drone's slot battery compartment. CAUTION: After playing, let the built-in battery cool at least 20 minutes before charging again. Lithium Battery Notes •• Do not charge longer than recommended. Unplug the charging cable when the drone is charged. •• Do not puncture or crush. Do not disassemble. •• Do not dispose of lithium batteries in the trash. •• If the electrolyte in the cells should get on your skin, thoroughly wash with soap and water. If in the eyes, rinse thoroughly with cool water. Immediately seek medical attention. •• Do not attempt to charge or operate damaged toys. Recycle Rechargeable Batteries Recycle used rechargeable batteries at one of the many collection sites in the U.S. and Canada. To find the site nearest you, visit www. call2recycle.org or call 1-800-822-8837. 6001438_PM_En_for inspection printing.indd 4 7/5/2016 4:33:48 PM Install Batteries in the Remote Control 1. Make sure the remote control is turned off. 2. Use a screwdriver to open the twin battery compartments. Then insert four AAA batteries (not included), matching the polarities (+ and –) marked inside. Replace the cover. Note: If the remote control’s LED flashes during use, the batteries are low and should be replaced. Battery Notes •• Dispose of old batteries promptly and properly. Do not burn or bury them. Use only fresh batteries of the required size and recommended type. •• Do not mix old and new batteries, different types of batteries (standard, alkaline, or rechargeable), or rechargeable batteries of different capacities. •• Remove batteries during longer storage periods. Batteries can leak chemicals that can damage electronic parts. About Expert/ Easy Fly Modes (Ex/Ez) This drone is designed with 2 flight modes: Ex (Expert) for advanced pilots to fly at a higher speed and perform stunts. Ez (Easy) for beginners and new drone owners. This operates at a slower speed to help you focus on basic navigation and develop a feel of the throttle's sensitivity. By default, in Ez mode, the stunt and speed options are disabled to prevent them from being accidentally activated. •• When pairing and flying for the first time, we recommend you use Ez for test flights and honing your takeoff, steering and landing skills. Pairing 1. Turn on the drone. The drone's LEDs flash. 2. Place the drone on level ground. 6001438_PM_En_for inspection printing.indd 5 7/5/2016 4:33:49 PM Remote Control Overview FLIP 360 Activates mode to perform full flips LED Forward / Reverse Movement Trim Throttle Ascend Turn left Push (Stunt mode) Turn right Descend 6001438_PM_En_for inspection printing.indd 6 7/5/2016 4:33:49 PM FLIP 180 Activates flip to fly your drone upside down Left / Right Slide Trim Steering Forward Slide left Push (High/low Slide right speed) Backward Ex/ OFF/ Ez Expert/ Off/ Easy mode 6001438_PM_En_for inspection printing.indd 7 7/5/2016 4:33:49 PM 3. Turn on the remote control to Ez or Ex . The remote control's LED flashes. 4. Move the throttle all the way up and then down to pair the remote control with the drone. The drone’s propellers remain still during pairing. When paired, the LEDs on both the remote control and drone light steadily. Note: If pairing fails, turn off the drone and remote control and repeat the steps above, or change locations to avoid electrical interference. Fly Your Drone 1. After pairing, with the drone on the ground, move the throttle forward to ascend. To avoid ground air turbulence, fly the drone at least 1 ft. (30cm) off the ground. 2. For speed options, pair and fly in Ex mode. Push the steering control in to switch between high speed (double beep) and low speed (single beep). IMPORTANT: If your drone crashes upside down, pull the throttle all the way down. Wait till the propellers have stopped still before you handle the drone. Land Your Drone 1. Slowly move the throttle backward to descend. Avoid moving the throttle too quickly, as it can stop the propellers instantly and cause the drone to crash. 2. When you finish playing, turn off the remote control and drone. Perform Flip Stunts CAUTION: Make sure there is enough space for the drone to perform stunts without crashing into objects or people. There are 2 flip styles: •• FLIP 180 for half-flips and to fly upside down. •• FLIP 360 for a full single somersault 1. Press the desired FLIP button. The remote control beeps repeatedly to indicate stunt mode activated. 2. Use the steering control to perform stunts: •• Front flip: Move steering forward •• Back flip: Move steering backward •• Barrel roll: Move steering right or left 3. The drone automatically exits stunt mode after performing a stunt. •• If you have selected FLIP 180 , the drone flies upside down and continues to do so based on steering. To fly right way up again, repeat above stunt steps 1-2. 6001438_PM_En_for inspection printing.indd 8 7/5/2016 4:33:50 PM Fly in "Headless" Mode Featuring an integrated true-north compass, the drone can automatically align to fly "headless" in either Ex or Ez flight modes. This simplifies steering, when you do the following: 1. Select an open location without strong magnetic interference and place the drone facing forward on level ground. 2. Turn on the drone. Point your remote control forward in the same direction as the drone, then switch on the remote control to Ex or Ez. 3. Move the throttle all the way up and then down to pair the remote control with the drone. When paired, the drone's eyes turn from flashing rapidly to lit steadily. Now press the throttle inward. The drone's eyes slowly flash to indicate successful headless mode setting, and you are ready for takeoff. 4. The drone will fly forward in any direction based on steering, regardless which way the drone's head faces during takeoff and flight. 6001438_PM_En_for inspection printing.indd 9 7/5/2016 4:33:51 PM Replace Damaged Propellers The left and right propellers of the drone are different, and marked A/B on the propeller and axles). You must use the correct propeller in the correct location, otherwise the drone will fail to take off. To replace a damaged propeller, remove the old one and press the new one onto the propeller axle. If you cannot remove the old propeller by hand, carefully use pliers. WARNING: Back Blades (black) Front Blades (red) • To avoid injury and damage, check the propellers for nicks and breaks and make sure they are securely attached before and after each flight. Replace any damaged propellers. • Use only the supplied propellers. Do not alter, modify, or customize the propellers. Troubleshooting Drone does not respond •• Make sure the drone and remote control are switched on and paired. •• Drone battery maybe low. Fully charge the battery. See “Charge the Drone Battery.“ •• Remote control batteries maybe low. Replace the batteries. •• Make sure the drone is within the control range (120 ft./36.5 m) and in line of sight. Drone difficult to control •• The throttle control is very sensitive. Use small, fine movements to control. •• Practice in Ez (Easy) mode. •• Propellers maybe deformed or damaged. Adjust propellers by hand. If you cannot adjust them, replace with the spare propellers. Drone swerves or moves erratically before taking off •• The gyroscope inside your drone needs calibrating: Do the following: 1. With your drone and remote control switched on and paired ( Ex or Ez), place the drone on level ground. 2. Move the throttle all the way down and the steering forward at the same time. Hold this position for a few seconds until the drone LEDs start to blink. When the drone LEDs light steadily, release the 6001438_PM_En_for inspection printing.indd 10 10 7/5/2016 4:33:51 PM controls. Calibration is successfully completed, and you are now ready for takeoff. •• See “Trim Your Drone" below if necessary fine tune and improve control of your drone after calibration. Trim Your Drone Move the throttle forward and see how the drone reacts. Reverse/ Forward Movement Trim: If the drone tends to move forward, press ; if it tends to move backward, press . Left/Right Slide Trim: If the drone tends to slide right, press ; if it tends to slide left, press . Note: The remote control beeps when you press a trim control, but stops beeping when you reach maximum trim adjustment. 6001438_PM_En_for inspection printing.indd 11 11 7/5/2016 4:33:51 PM FCC Information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • onnect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. If you cannot eliminate the interference, the FCC requires that you stop using your equipment. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Limited Warranty Go to www.radioshack.com/help for details. RadioShack Customer Relations 300 RadioShack Circle, Fort Worth, TX 76102 www.radioshack.com Complies with the European Union’s “Restriction of Hazardous Substances Directive,” which protects the environment by restricting specific hazardous materials and products. © 2016 General Wireless Operations Inc. All rights reserved. RadioShack is a registered trademark used by General Wireless Operations Inc. dba RadioShack 6001438_PM_En_for inspection printing.indd 12 Printed in China 07A16 6001438 12 7/5/2016 4:33:51 PM
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes XMP Toolkit : Adobe XMP Core 4.2.2-c063 53.352624, 2008/07/30-18:12:18 Create Date : 2016:07:05 16:33:46+08:00 Metadata Date : 2016:07:05 16:33:51+08:00 Modify Date : 2016:07:05 16:33:51+08:00 Creator Tool : Adobe InDesign CS4 (6.0) Thumbnail Format : JPEG Thumbnail Width : 256 Thumbnail Height : 256 Thumbnail Image : (Binary data 8642 bytes, use -b option to extract) Instance ID : uuid:4f2a4d56-e8e7-46c0-b432-4e5c1ca0e455 Document ID : xmp.did:C5E099E96D3FE6119EA59D3340E8E2B5 Original Document ID : xmp.did:AC4C797A0329E511895EA42A20E81BFE Rendition Class : proof:pdf History Action : created, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved History Instance ID : xmp.iid:AC4C797A0329E511895EA42A20E81BFE, xmp.iid:AD4C797A0329E511895EA42A20E81BFE, xmp.iid:AE4C797A0329E511895EA42A20E81BFE, xmp.iid:AF4C797A0329E511895EA42A20E81BFE, xmp.iid:EBE9E68C3229E511B65BAF2671903B2A, xmp.iid:0B5DB2D5DF29E511ADF9FA8FB5FEC066, xmp.iid:0C5DB2D5DF29E511ADF9FA8FB5FEC066, xmp.iid:DB239B13622BE5118242D9AB48BF1E5D, xmp.iid:746BF150722BE5118242D9AB48BF1E5D, xmp.iid:7FC294EC492CE51192859544A231B23D, xmp.iid:81C294EC492CE51192859544A231B23D, xmp.iid:82C294EC492CE51192859544A231B23D, xmp.iid:83C294EC492CE51192859544A231B23D, xmp.iid:40A6E299702CE511A017DF602D7CBD09, xmp.iid:4D584102AB2EE51180C2EB3845C0A494, xmp.iid:4F584102AB2EE51180C2EB3845C0A494, xmp.iid:356D12201E30E511A426CBD70BCA519F, xmp.iid:DDD75736E530E5118F2BB9FA721EDF5B, xmp.iid:E0D75736E530E5118F2BB9FA721EDF5B, xmp.iid:74BD3A7D103CE5118B6B8615AA2EC394, xmp.iid:A3AE045ACA3CE511AB69E3D93D05B71D, xmp.iid:A5AE045ACA3CE511AB69E3D93D05B71D, xmp.iid:151071290C3FE511AC23CC9977624C9A, xmp.iid:171071290C3FE511AC23CC9977624C9A, xmp.iid:DFD76A593B3FE511AC23CC9977624C9A, xmp.iid:71BD782FD93FE511A25BC23D283EB671, xmp.iid:7E2C1889F93FE511A25BC23D283EB671, xmp.iid:BE31EE56A840E5118B34912914868200, xmp.iid:BF31EE56A840E5118B34912914868200, xmp.iid:C331EE56A840E5118B34912914868200, xmp.iid:19830D319141E5118CA68ABD9B14510E, xmp.iid:1E830D319141E5118CA68ABD9B14510E, xmp.iid:15B8503AA12BE611987BCBDCE322D010, xmp.iid:16B8503AA12BE611987BCBDCE322D010, xmp.iid:B607EAA9562CE61189C4C0B5D9746829, xmp.iid:B707EAA9562CE61189C4C0B5D9746829, xmp.iid:BB07EAA9562CE61189C4C0B5D9746829, xmp.iid:B9478530312DE61188A9C93685EBDC67, xmp.iid:F814BA4F6B33E61196ABE3F508F7EFC4, xmp.iid:F914BA4F6B33E61196ABE3F508F7EFC4, xmp.iid:A9460484AC33E61196ABE3F508F7EFC4, xmp.iid:F50B8BE95234E611AD4EB04D14F884E5, xmp.iid:F80B8BE95234E611AD4EB04D14F884E5, xmp.iid:F90B8BE95234E611AD4EB04D14F884E5, xmp.iid:FB0B8BE95234E611AD4EB04D14F884E5, xmp.iid:FC0B8BE95234E611AD4EB04D14F884E5, xmp.iid:4A0E1C345F37E611ACAFED6DB2A11F23, xmp.iid:7BE5577AA83DE6118A0DC276002E85A0, xmp.iid:7CE5577AA83DE6118A0DC276002E85A0, xmp.iid:7DE5577AA83DE6118A0DC276002E85A0, xmp.iid:7EE5577AA83DE6118A0DC276002E85A0, xmp.iid:3AC4C174AB3EE611B007C1D80EF0A3FD, xmp.iid:9644746B373FE6119EA59D3340E8E2B5, xmp.iid:9744746B373FE6119EA59D3340E8E2B5, xmp.iid:9844746B373FE6119EA59D3340E8E2B5, xmp.iid:9B44746B373FE6119EA59D3340E8E2B5, xmp.iid:9C44746B373FE6119EA59D3340E8E2B5, xmp.iid:B4B2724D5B3FE6119EA59D3340E8E2B5, xmp.iid:C3E099E96D3FE6119EA59D3340E8E2B5, xmp.iid:C4E099E96D3FE6119EA59D3340E8E2B5, xmp.iid:C5E099E96D3FE6119EA59D3340E8E2B5, xmp.iid:C7E099E96D3FE6119EA59D3340E8E2B5, xmp.iid:EA7B95FBD041E611879CFD8E35DB266B, xmp.iid:363682F57742E611905DD789A5857313, xmp.iid:373682F57742E611905DD789A5857313, xmp.iid:3E3682F57742E611905DD789A5857313 History When : 2015:07:13 12:02:01+08:00, 2015:07:13 12:07:28+08:00, 2015:07:13 12:07:28+08:00, 2015:07:13 12:12:43+08:00, 2015:07:13 15:41:28+08:00, 2015:07:14 12:21:44+08:00, 2015:07:14 12:25:13+08:00, 2015:07:16 11:40:50+08:00, 2015:07:16 16:41:57+08:00, 2015:07:17 14:06:11+08:00, 2015:07:17 14:40:56+08:00, 2015:07:17 14:41:32+08:00, 2015:07:17 14:42:02+08:00, 2015:07:17 18:43:03+08:00, 2015:07:20 16:00:14+08:00, 2015:07:20 17:42:11+08:00, 2015:07:22 18:03:49+08:00, 2015:07:23 14:09:43+08:00, 2015:07:23 16:44:51+08:00, 2015:08:06 16:51:20+08:00, 2015:08:07 16:31:03+08:00, 2015:08:07 17:03:51+08:00, 2015:08:10 16:01:26+08:00, 2015:08:10 16:12:04+08:00, 2015:08:10 19:02:48+08:00, 2015:08:11 15:04+08:00, 2015:08:11 16:56:09+08:00, 2015:08:12 12:16:45+08:00, 2015:08:12 12:17:51+08:00, 2015:08:12 12:25:59+08:00, 2015:08:13 17:12:20+08:00, 2015:08:13 17:51:44+08:00, 2016:06:06 19:22:15+08:00, 2016:06:06 19:25:31+08:00, 2016:06:07 10:22:21+08:00, 2016:06:07 10:51:42+08:00, 2016:06:07 14:27:39+08:00, 2016:06:08 12:53:34+08:00, 2016:06:16 17:35:20+08:00, 2016:06:16 17:40:04+08:00, 2016:06:16 19:14:45+08:00, 2016:06:17 14:15:39+08:00, 2016:06:17 15:40:55+08:00, 2016:06:17 15:46:16+08:00, 2016:06:17 17:02:25+08:00, 2016:06:17 17:19:51+08:00, 2016:06:21 11:28:48+08:00, 2016:06:29 11:20:49+08:00, 2016:06:29 11:20:49+08:00, 2016:06:29 12:43:27+08:00, 2016:06:29 15:38:04+08:00, 2016:06:30 19:32:35+08:00, 2016:07:01 12:33:02+08:00, 2016:07:01 14:12:24+08:00, 2016:07:01 14:14:12+08:00, 2016:07:01 14:33:45+08:00, 2016:07:01 14:38:31+08:00, 2016:07:01 16:03:47+08:00, 2016:07:01 18:26:10+08:00, 2016:07:01 18:26:46+08:00, 2016:07:01 18:26:46+08:00, 2016:07:01 18:34:15+08:00, 2016:07:04 18:20:51+08:00, 2016:07:05 14:30:33+08:00, 2016:07:05 14:30:59+08:00, 2016:07:05 16:33:33+08:00 History Software Agent : Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0 History Changed : /, /metadata, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /metadata, /;/metadata, /, /, /, /, /, /, /, /, /, /, /metadata, /;/metadata, /, /, /, /, / Derived From Instance ID : xmp.iid:C4E099E96D3FE6119EA59D3340E8E2B5 Derived From Document ID : xmp.did:7CE5577AA83DE6118A0DC276002E85A0 Derived From Original Document ID: xmp.did:AC4C797A0329E511895EA42A20E81BFE Derived From Rendition Class : default Manifest Link Form : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream Manifest Placed X Resolution : 300.00, 72.00, 300.00, 72.00, 240.00, 300.00, 300.00, 300.00, 300.00, 72.00, 240.00, 240.00, 240.00, 72.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 72.00, 72.00 Manifest Placed Y Resolution : 300.00, 72.00, 300.00, 72.00, 240.00, 300.00, 300.00, 300.00, 300.00, 72.00, 240.00, 240.00, 240.00, 72.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 72.00, 72.00 Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches Manifest Reference Instance ID : xmp.iid:D97037E9D2FFE4119F89C098347FA4CC, xmp.iid:4A6A0DDAE27DE511AF06BA6A6BE2DAAC, xmp.iid:0280117407206811822AA5DF7238F7B6, xmp.iid:12EC64C0ADA5E2119884F4F49E79F0EF, xmp.iid:28740E94600DE4118327DCE4372CB948, xmp.iid:63C5325E0E20681183D1D6FBE79356DA, xmp.iid:751334D70E3DE611B340E44BBB748FA6, xmp.iid:1DF141E630206811822AA3FE7210EE58, xmp.iid:751334D70E3DE611B340E44BBB748FA6, uuid:e3598fb7-28fb-4d9c-be94-4d25de62f62c, xmp.iid:1836CDFB21206811822AACF055DA9159, xmp.iid:AFE382822C34E611BD6CD10DC53E15B9, xmp.iid:1836CDFB21206811822AACF055DA9159, xmp.iid:8E3D5C9B3A83E31196D6A30769117383, xmp.iid:96A3B86F5F34E611B6D7BB548EBFF580, xmp.iid:4F3C1B92DA39E61193D3B71BF9202135, xmp.iid:4F3C1B92DA39E61193D3B71BF9202135, xmp.iid:9E181D6C1D206811822AE095CBB6EFCC, xmp.iid:97181D6C1D206811822AE095CBB6EFCC, xmp.iid:97181D6C1D206811822AE095CBB6EFCC, xmp.iid:97181D6C1D206811822AE095CBB6EFCC, xmp.iid:4F3C1B92DA39E61193D3B71BF9202135, xmp.iid:97181D6C1D206811822AE095CBB6EFCC, xmp.iid:83F2393743206811822ACCFC65B095D0, xmp.iid:4F3C1B92DA39E61193D3B71BF9202135, xmp.iid:7EB60B6D9F36E611B23283EC3FF6E5CA, xmp.iid:82B60B6D9F36E611B23283EC3FF6E5CA, uuid:a05e4252-5794-4caa-b008-83799a7e7f98, xmp.iid:149E821184F1E3118267EBCE727CA1B8 Manifest Reference Document ID : xmp.did:D97037E9D2FFE4119F89C098347FA4CC, xmp.did:4A6A0DDAE27DE511AF06BA6A6BE2DAAC, xmp.did:07195c52-84f2-4b28-9535-88642788c3b6, xmp.did:12EC64C0ADA5E2119884F4F49E79F0EF, xmp.did:1FEA207AA00CE41185FD9778EF2D93E0, xmp.did:3012eda5-9659-4a28-9322-0d234709b3b9, xmp.did:8A2BF1EC2D206811822AA3FE7210EE58, xmp.did:8A2BF1EC2D206811822AA3FE7210EE58, xmp.did:8A2BF1EC2D206811822AA3FE7210EE58, xmp.did:F4D04A25CB3DE611BFE8D434118D157E, xmp.did:955F6A18E60FE511A25083AA911E4A56, xmp.did:955F6A18E60FE511A25083AA911E4A56, xmp.did:955F6A18E60FE511A25083AA911E4A56, xmp.did:8E3D5C9B3A83E31196D6A30769117383, xmp.did:ce46b3a7-b932-4fea-a814-1dbf479b04ae, xmp.did:ce46b3a7-b932-4fea-a814-1dbf479b04ae, xmp.did:ce46b3a7-b932-4fea-a814-1dbf479b04ae, xmp.did:9580690e-65f4-43e3-8642-2c9b96f58980, xmp.did:18712F7719206811822AE095CBB6EFCC, xmp.did:18712F7719206811822AE095CBB6EFCC, xmp.did:18712F7719206811822AE095CBB6EFCC, xmp.did:ce46b3a7-b932-4fea-a814-1dbf479b04ae, xmp.did:18712F7719206811822AE095CBB6EFCC, xmp.did:07195c52-84f2-4b28-9535-88642788c3b6, xmp.did:ce46b3a7-b932-4fea-a814-1dbf479b04ae, xmp.did:ce46b3a7-b932-4fea-a814-1dbf479b04ae, xmp.did:ce46b3a7-b932-4fea-a814-1dbf479b04ae, xmp.did:88C42DEB402AE411B642B824226E9C2F, xmp.did:149E821184F1E3118267EBCE727CA1B8 Doc Change Count : 5098 Format : application/pdf Producer : Adobe PDF Library 9.0 Trapped : False Page Count : 12 Creator : Adobe InDesign CS4 (6.0)EXIF Metadata provided by EXIF.tools