ZEGO ELECTRONIC 15TX Controller of Surveyor Drone User Manual
ZEGO ELECTRONIC COMPANY LIMITED Controller of Surveyor Drone
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3060802 |
| Application ID | lL0HjyIw8PoiYMtSSu46Zw== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 113.09kB (1413649 bits) |
| Date Submitted | 2016-07-13 00:00:00 |
| Date Available | 2016-07-13 00:00:00 |
| Creation Date | 2016-06-21 18:55:34 |
| Producing Software | Adobe PDF Library 9.0 |
| Document Lastmod | 2016-06-21 18:55:37 |
| Document Title | User Manual |
| Document Creator | Adobe InDesign CS4 (6.0) |
Install Batteries in the Remote Control 1. Turn off the controller. 2. Open the battery compartment and insert 4 × AAA batteries (not included), matching the polarity symbols (+ and –) marked inside the compartment. Replace the battery cover securely with the screws. Surveyor camera drone Note: If the remote control’s LED flashes during use, the batteries are low and should be replaced. Age 12+ Battery Notes • Dispose of old batteries promptly and properly. Do not burn or bury them. Use only fresh batteries of the required size and recommended type. Propeller (4) • Do not mix old and new batteries, different types of batteries (standard, alkaline, or rechargeable), or rechargeable batteries of different capacities. • Remove batteries during longer storage periods. Charge the Drone Battery Back LEDs (green) 1. Use the USB charging cable to connect the battery to a USB power source. The LED on the USB connector lights red during charging, and turns off when charging is complete. Front LEDs (white) LED A full charge takes about 45 minutes, and provides up to 5 minutes of flight time. Camera Lens 2. After charging, unplug the charging cable. Do not attempt to overcharge. We hope you enjoy your Surveyor Camera Drone from RadioShack. Congratulations! No FAA Registration is required for this drone. Please read this user’s guide before using your drone. 3. Open the drone battery compartment door to connect the battery socket cables. The drone’s 4 LEDs flash. Tuck the battery and wires neatly inside the compartment and secure the door. Package Contents CAUTION: • Surveyor Camera Drone • USB Charging Cable • Spare Propellers (4) • 2.4 GHz Remote Control • User’s Guide • 3.7V, 250mAh Lithium-polymer battery Specifications Lithium Battery Notes Drone power...............3.7V, 250 mAh lithium polymer battery Remote Control power..................4×AAA batteries Control Distance........65 ft. (20m) • Specifications are subject to change and improvement without notice. Actual product may vary from the images found in this document. • • • CHOKING HAZARD! Small parts. Not for children under 3 years. Follow the manufacturer’s instructions for charging the drone and do not charge longer than recommended. Unplug the charging cable when the drone is charged. Do not puncture or crush. Do not disassemble. Do not dispose of lithium batteries in the trash. If the electrolyte in the cells should get on your skin, thoroughly wash with soap and water. If in the eyes, rinse thoroughly with cool water. Immediately seek • • Use only the supplied lithium battery and cable, or ones with the same specification to charge. Using any other batteries, cables or different specifications may damage the drone. • After playing, let thebattery cool before charging. medical attention. Do not attempt to charge or operate damaged toys. FCC Information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may ©2016 General Wireless Operations Inc. All rights reserved. RadioShack is a registered trademark used under license by General Wireless Operations Inc. dba RadioShack. 6001433_UG_Eng.indd 1 cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult your dealer or an experienced radio/TV technician for help. If you cannot eliminate the interference, the FCC requires that you stop using your equipment. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Limited Warranty Go to www.radioshack.com/help for details. RadioShack Customer Relations 300 RadioShack Circle, Fort Worth, TX 76102 www.radioshack.com 06A16 6001433 Printed in China 6/21/2016 6:55:36 PM LED Forward/Reverse Movement Trim Flashing = Searching On = Paired Replace Damaged Propellers Left/Right Slide Trim Throttle Steering Ascend Forward Push Turn (Stunt mode) Turn right left Push Slide (High/low Slide speed) right left Descend Ex/ OFF/ Ez Back Blades (black) The left and right propellers of the drone are different (see color and A/B orientation marking on underside). Make sure you insert the correct propeller in the correct location, otherwise the drone will fail to take off. To replace a damaged propeller, remove the old one and press the new one onto the propeller axle. If you cannot remove the old propeller by hand, carefully use pliers. WARNING: • • Front Blades (grey) To avoid injury and damage, inspect the propellers for nicks and breaks and make sure they are securely attached before and after each flight. Replace nicked, chipped, cracked or broken propellers. Use only the supplied propellers. Do not alter, modify, or customize the propellers. Backward Expert/ Off/ Easy mode About Easy and Expert Fly Modes This drone is designed with 2 play modes. • Expert: select this mode when you are ready to fly at a higher speed and perform stunts. • Ez (Easy) for beginners and new drone owners. This operates at a slower speed to help you focus on basic navigation and develop a feel of the throttle’s sensitivity. By default, in Ez mode, the stunt and speed options are disabled to prevent them from being accidentally activated. • When pairing and flying for the first time, we recommend you use Ez for practising your takeoff, steering and landing skills. Pairing 1. Place the drone on level ground. 2. Turn on the remote control to Ez or Ex. The remote control’s LED flashes. 3. Move the throttle all the way up and then down to pair the remote control with the drone. The drone’s blades remain still during pairing. When paired, the LEDs on both the remote control and drone light steadily. Note: If pairing fails, turn off the drone and remote control and repeat the steps above, or change locations to avoid electrical interference. Fly Your Drone 1. After pairing, with the drone on the ground, move the throttle forward to ascend. To avoid ground air turbulence, fly the drone at least 1 ft. (30cm) off the ground. 6001433_UG_Eng.indd 2 For advanced users: Hold the remote control with one hand, resting your thumb on the throttle. Toss the drone about 4 ft. (1.2m) away from you, and move the throttle forward to fly. The drone adjusts itself automatically and flies smoothly. 2. For speed options, pair and fly in Ex mode. Push the steering control in to switch between high speed (double beep) and low speed (single beep). IMPORTANT: If your drone crashes upside down, pull the throttle down and switch off the remote control first. Never touch the drone when blades are still moving. Trim Your Drone Move the throttle forward and see how the drone reacts. Forward/Reverse Movement Trim: If the drone tends to move forward, press ; if it tends to move backward, press f g. Left/Right Slide Trim: If the drone tends to slide right, press f ; if it tends to slide left, press g. Note: The remote control beeps when you press a trim control but stops beeping when you reach maximum trim adjustment. Land Your Drone 1. Slowly move the throttle backward to descend. Avoid moving the throttle too quickly, as it can stop the blades instantly and cause the drone to crash. 2. After playing, turn off the remote control and remove the drone’s battery. Perform Stunts Troubleshooting IMPORTANT: Make sure there is enough space for the drone to perform stunts without crashing into objects or people. Drone does not respond 1. Push the throttle control in so that the remote control beeps repeatedly to enter stunt mode. 2. Use the steering control to perform stunts: • Front flip: Move steering forward • Make sure the drone and remote control are switched on and paired. • Drone battery maybe low. Fully charge the battery. See “Charge the Drone Battery”. • Make sure the drone is within the control range (65 ft./20 m) and in line of sight. • Back flip: Move steering backward Drone difficult to control • Barrel roll: Move steering right or left • The throttle control is very sensitive. Use small, fine movements to control. 3. The drone automatically exits stunt mode after performing a stunt. • Using the Camera 1. Insert a micro SD card (not included) in the card slot as shown. Push the SD card in until it clicks. • Practice in Ez (Easy) mode. Propellers may be deformed/ damaged. Adjust the propellers by hand. If you cannot adjust them, replace with the spare propellers. Fly Safely SD once to take a photo, 2. During flight, press to record a video. or press and hold Release the button to stop recording. 3. After flying, to remove the SD card, press it to eject. Note: Before inserting the SD card, make sure it has enough free space. The SD card fits the slot only one way. Do not force it. • • • • • • • • Adult supervision is recommended at all times. Fly the drone safely. If it crashes, the SD card may fall out and be lost. Keep eyes, hands, hair, and loose clothing away from moving propellers. Do not fly the drone near or at other people or animals. When flying indoors, keep the drone away from walls, air conditioning, air vents, fans, breakable objects, and other obstacles. When flying outdoors, keep the drone away from power lines, trees, weeds, and water. Do not fly your drone over private property where you are not welcomed. Do not fly your drone where emergency responders are working, or emergency aircraft are operating. 6/21/2016 6:55:37 PM
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes XMP Toolkit : Adobe XMP Core 4.2.2-c063 53.352624, 2008/07/30-18:12:18 Create Date : 2016:06:21 18:55:34+08:00 Metadata Date : 2016:06:21 18:55:37+08:00 Modify Date : 2016:06:21 18:55:37+08:00 Creator Tool : Adobe InDesign CS4 (6.0) Thumbnail Format : JPEG Thumbnail Width : 256 Thumbnail Height : 256 Thumbnail Image : (Binary data 12287 bytes, use -b option to extract) Instance ID : uuid:648f63c0-3d5b-4638-8bd4-ecc20fe6b4d7 Document ID : xmp.did:6CB56A9EDA2EE6119E03D642D78B6628 Original Document ID : xmp.did:239FC4779885E411BB57A6D8E6998828 Rendition Class : proof:pdf History Action : created, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved History Instance ID : xmp.iid:239FC4779885E411BB57A6D8E6998828, xmp.iid:249FC4779885E411BB57A6D8E6998828, xmp.iid:259FC4779885E411BB57A6D8E6998828, xmp.iid:269FC4779885E411BB57A6D8E6998828, xmp.iid:289FC4779885E411BB57A6D8E6998828, xmp.iid:4DDE057A5B87E4118D36C7F7E7619D92, xmp.iid:4EDE057A5B87E4118D36C7F7E7619D92, xmp.iid:4FDE057A5B87E4118D36C7F7E7619D92, xmp.iid:50DE057A5B87E4118D36C7F7E7619D92, xmp.iid:51DE057A5B87E4118D36C7F7E7619D92, xmp.iid:52DE057A5B87E4118D36C7F7E7619D92, xmp.iid:54DE057A5B87E4118D36C7F7E7619D92, xmp.iid:B5F19B3D8889E411BAFAE083578AD865, xmp.iid:F1109584188BE411915E8EAC57E79482, xmp.iid:F3109584188BE411915E8EAC57E79482, xmp.iid:F4109584188BE411915E8EAC57E79482, xmp.iid:F6109584188BE411915E8EAC57E79482, xmp.iid:B5F8C506DDE1E511A2588013B8F816EA, xmp.iid:B6F8C506DDE1E511A2588013B8F816EA, xmp.iid:426D56DFF0E1E51185E7DBCED138802B, xmp.iid:436D56DFF0E1E51185E7DBCED138802B, xmp.iid:446D56DFF0E1E51185E7DBCED138802B, xmp.iid:456D56DFF0E1E51185E7DBCED138802B, xmp.iid:466D56DFF0E1E51185E7DBCED138802B, xmp.iid:476D56DFF0E1E51185E7DBCED138802B, xmp.iid:486D56DFF0E1E51185E7DBCED138802B, xmp.iid:496D56DFF0E1E51185E7DBCED138802B, xmp.iid:9682514C0AE4E51195B59DC9FBB68B00, xmp.iid:C7F6DF7AAAE6E511B21D8ABF217A0D70, xmp.iid:C8F6DF7AAAE6E511B21D8ABF217A0D70, xmp.iid:C9F6DF7AAAE6E511B21D8ABF217A0D70, xmp.iid:CAF6DF7AAAE6E511B21D8ABF217A0D70, xmp.iid:CBF6DF7AAAE6E511B21D8ABF217A0D70, xmp.iid:CCF6DF7AAAE6E511B21D8ABF217A0D70, xmp.iid:A629FB2C32E7E5118F238A225B661161, xmp.iid:AB29FB2C32E7E5118F238A225B661161, xmp.iid:AC29FB2C32E7E5118F238A225B661161, xmp.iid:AD29FB2C32E7E5118F238A225B661161, xmp.iid:BEE7ABE568E7E5118F238A225B661161, xmp.iid:BFE7ABE568E7E5118F238A225B661161, xmp.iid:1E4D5B32CEE9E511B0FD866A8C5A80B2, xmp.iid:DC54E8537EEAE511BE95CE02CAB5A5DE, xmp.iid:C428512F94F4E511AD49B0FCA80BC9B3, xmp.iid:4E84C2B631F6E511AC2D87F32044BCEB, xmp.iid:4F84C2B631F6E511AC2D87F32044BCEB, xmp.iid:5184C2B631F6E511AC2D87F32044BCEB, xmp.iid:68789BA001F7E5118DAAA78B3FCA580B, xmp.iid:ED72A459C0F7E511857A87849E96ED91, xmp.iid:EF72A459C0F7E511857A87849E96ED91, xmp.iid:F072A459C0F7E511857A87849E96ED91, xmp.iid:F172A459C0F7E511857A87849E96ED91, xmp.iid:F272A459C0F7E511857A87849E96ED91, xmp.iid:F472A459C0F7E511857A87849E96ED91, xmp.iid:B907EAA9562CE61189C4C0B5D9746829, xmp.iid:BA07EAA9562CE61189C4C0B5D9746829, xmp.iid:BC07EAA9562CE61189C4C0B5D9746829, xmp.iid:BD07EAA9562CE61189C4C0B5D9746829, xmp.iid:95CF94B5A12CE61189A49B81DFDC8D45, xmp.iid:96CF94B5A12CE61189A49B81DFDC8D45, xmp.iid:BA478530312DE61188A9C93685EBDC67, xmp.iid:BB478530312DE61188A9C93685EBDC67, xmp.iid:BC478530312DE61188A9C93685EBDC67, xmp.iid:6BB56A9EDA2EE6119E03D642D78B6628, xmp.iid:6CB56A9EDA2EE6119E03D642D78B6628, xmp.iid:F405B6DDF32EE611B976FBB5B025FEF7, xmp.iid:F505B6DDF32EE611B976FBB5B025FEF7, xmp.iid:F605B6DDF32EE611B976FBB5B025FEF7, xmp.iid:F705B6DDF32EE611B976FBB5B025FEF7, xmp.iid:F805B6DDF32EE611B976FBB5B025FEF7, xmp.iid:F905B6DDF32EE611B976FBB5B025FEF7, xmp.iid:F5FE82A31C31E61195CED5D7042D6137, xmp.iid:F6FE82A31C31E61195CED5D7042D6137, xmp.iid:A6460484AC33E61196ABE3F508F7EFC4, xmp.iid:BEB0B0EE9936E6118C269F33EA7FB484, xmp.iid:BFB0B0EE9936E6118C269F33EA7FB484, xmp.iid:A9C8702E9037E611ACAFED6DB2A11F23, xmp.iid:ACC8702E9037E611ACAFED6DB2A11F23 History When : 2014:12:17 11:01:28+08:00, 2014:12:17 11:01:49+08:00, 2014:12:17 11:01:49+08:00, 2014:12:17 11:04:24+08:00, 2014:12:17 11:20:46+08:00, 2014:12:19 17:13:35+08:00, 2014:12:19 17:32:29+08:00, 2014:12:19 17:33:56+08:00, 2014:12:19 17:43:56+08:00, 2014:12:19 18:00:47+08:00, 2014:12:19 18:51:44+08:00, 2014:12:19 20:42:57+08:00, 2014:12:22 11:11:37+08:00, 2014:12:24 10:57:28+08:00, 2014:12:24 11:23:50+08:00, 2014:12:24 11:25:30+08:00, 2014:12:24 11:44:10+08:00, 2016:03:04 15:45:12+08:00, 2016:03:04 15:45:12+08:00, 2016:03:04 18:07:16+08:00, 2016:03:04 18:12:34+08:00, 2016:03:04 18:27:18+08:00, 2016:03:04 18:30:06+08:00, 2016:03:04 18:30:06+08:00, 2016:03:04 18:30:44+08:00, 2016:03:04 18:47:40+08:00, 2016:03:04 18:49:50+08:00, 2016:03:07 18:31:30+08:00, 2016:03:10 18:25:58+08:00, 2016:03:10 18:27:41+08:00, 2016:03:10 18:27:41+08:00, 2016:03:10 18:46:07+08:00, 2016:03:10 18:47:06+08:00, 2016:03:10 18:47:46+08:00, 2016:03:11 11:22:37+08:00, 2016:03:11 16:22:22+08:00, 2016:03:11 16:22:22+08:00, 2016:03:11 16:25:36+08:00, 2016:03:11 17:58:05+08:00, 2016:03:11 19:15:15+08:00, 2016:03:14 19:17:54+08:00, 2016:03:15 15:38:16+08:00, 2016:03:28 11:35:04+08:00, 2016:03:30 12:41:48+08:00, 2016:03:30 12:42:05+08:00, 2016:03:30 17:24:20+08:00, 2016:03:31 18:53:58+08:00, 2016:04:01 12:15:21+08:00, 2016:04:01 14:16:55+08:00, 2016:04:01 14:29:38+08:00, 2016:04:01 14:32:30+08:00, 2016:04:01 15:06:16+08:00, 2016:04:01 15:13:12+08:00, 2016:06:07 12:20:03+08:00, 2016:06:07 12:20:03+08:00, 2016:06:07 15:34:22+08:00, 2016:06:07 19:11:42+08:00, 2016:06:07 19:19:32+08:00, 2016:06:07 19:27:40+08:00, 2016:06:08 13:08:17+08:00, 2016:06:08 13:10:51+08:00, 2016:06:08 13:34:28+08:00, 2016:06:10 15:11:57+08:00, 2016:06:10 15:11:57+08:00, 2016:06:10 18:12:41+08:00, 2016:06:10 18:13:37+08:00, 2016:06:10 18:19:51+08:00, 2016:06:10 18:26:23+08:00, 2016:06:10 18:43:12+08:00, 2016:06:10 18:49:55+08:00, 2016:06:13 12:09:35+08:00, 2016:06:13 12:17:40+08:00, 2016:06:16 18:24:32+08:00, 2016:06:20 11:49:04+08:00, 2016:06:20 12:50:34+08:00, 2016:06:21 17:35:14+08:00, 2016:06:21 18:53:33+08:00 History Software Agent : Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0 History Changed : /, /metadata, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /metadata, /;/metadata, /, /, /, /metadata, /, /, /, /, /, /, /metadata, /;/metadata, /, /, /, /, /metadata, /;/metadata, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /metadata, /;/metadata, /, /, /, /, /, /, /, /metadata, /;/metadata, /, /, /, /, /, /, /, /, /, /, /, /, / Derived From Instance ID : xmp.iid:6BB56A9EDA2EE6119E03D642D78B6628 Derived From Document ID : xmp.did:BA07EAA9562CE61189C4C0B5D9746829 Derived From Original Document ID: xmp.did:239FC4779885E411BB57A6D8E6998828 Derived From Rendition Class : default Manifest Link Form : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream Manifest Placed X Resolution : 72.00, 72.00, 240.00, 240.00, 240.00, 72.00, 300.00, 240.00, 240.00, 72.00, 240.00, 300.00, 240.00, 240.00, 300.00, 300.00, 240.00, 240.00, 300.00, 240.00, 240.00, 300.00, 300.00, 300.00 Manifest Placed Y Resolution : 72.00, 72.00, 240.00, 240.00, 240.00, 72.00, 300.00, 240.00, 240.00, 72.00, 240.00, 300.00, 240.00, 240.00, 300.00, 300.00, 240.00, 240.00, 300.00, 240.00, 240.00, 300.00, 300.00, 300.00 Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches Manifest Reference Instance ID : uuid:a05e4252-5794-4caa-b008-83799a7e7f98, xmp.iid:4A6A0DDAE27DE511AF06BA6A6BE2DAAC, xmp.iid:B1E382822C34E611BD6CD10DC53E15B9, xmp.iid:AFE382822C34E611BD6CD10DC53E15B9, xmp.iid:1836CDFB21206811822AACF055DA9159, xmp.iid:8E3D5C9B3A83E31196D6A30769117383, xmp.iid:AE39935D16206811822AD28DAC455A03, xmp.iid:11BE64555A0EE41192E4BA871BE4E53F, xmp.iid:EC855F0D520EE41192E4BA871BE4E53F, xmp.iid:12EC64C0ADA5E2119884F4F49E79F0EF, xmp.iid:28740E94600DE4118327DCE4372CB948, xmp.iid:63C5325E0E20681183D1D6FBE79356DA, xmp.iid:08BE64555A0EE41192E4BA871BE4E53F, xmp.iid:EC855F0D520EE41192E4BA871BE4E53F, xmp.iid:9D7E049AA233E611A056CDFEA1AF3948, xmp.iid:B5E382822C34E611BD6CD10DC53E15B9, xmp.iid:D17C14D0FAA5E411A642CB097F530407, xmp.iid:D17C14D0FAA5E411A642CB097F530407, xmp.iid:82B60B6D9F36E611B23283EC3FF6E5CA, xmp.iid:D17C14D0FAA5E411A642CB097F530407, xmp.iid:D17C14D0FAA5E411A642CB097F530407, xmp.iid:5F2652A61C206811822AD28DAC455A03, xmp.iid:9D7E049AA233E611A056CDFEA1AF3948, xmp.iid:7EB60B6D9F36E611B23283EC3FF6E5CA Manifest Reference Document ID : xmp.did:88C42DEB402AE411B642B824226E9C2F, xmp.did:4A6A0DDAE27DE511AF06BA6A6BE2DAAC, xmp.did:955F6A18E60FE511A25083AA911E4A56, xmp.did:955F6A18E60FE511A25083AA911E4A56, xmp.did:955F6A18E60FE511A25083AA911E4A56, xmp.did:8E3D5C9B3A83E31196D6A30769117383, xmp.did:0880117407206811822AD28DAC455A03, xmp.did:0ABE64555A0EE41192E4BA871BE4E53F, xmp.did:7A27A8E8440EE41192E4BA871BE4E53F, xmp.did:12EC64C0ADA5E2119884F4F49E79F0EF, xmp.did:1FEA207AA00CE41185FD9778EF2D93E0, xmp.did:3012eda5-9659-4a28-9322-0d234709b3b9, xmp.did:99F0B114540EE41192E4BA871BE4E53F, xmp.did:7A27A8E8440EE41192E4BA871BE4E53F, xmp.did:3aefd1b7-d952-48cd-8bd1-ac85d8a06469, xmp.did:ce46b3a7-b932-4fea-a814-1dbf479b04ae, xmp.did:BE999676EDA5E411A642CB097F530407, xmp.did:BE999676EDA5E411A642CB097F530407, xmp.did:ce46b3a7-b932-4fea-a814-1dbf479b04ae, xmp.did:BE999676EDA5E411A642CB097F530407, xmp.did:BE999676EDA5E411A642CB097F530407, xmp.did:266871b7-786f-4a84-b1b6-5b91872595e1, xmp.did:3aefd1b7-d952-48cd-8bd1-ac85d8a06469, xmp.did:ce46b3a7-b932-4fea-a814-1dbf479b04ae Doc Change Count : 5060 Format : application/pdf Producer : Adobe PDF Library 9.0 Trapped : False Page Count : 2 Creator : Adobe InDesign CS4 (6.0)EXIF Metadata provided by EXIF.tools