ZEN Factory Group 5P04006 Xbox One Media Remote and Keyboard User Manual

The ZEN Factory Group (Asia) Xbox One Media Remote and Keyboard Users Manual

Users Manual

USING THE KEYBOARDremote control automatically enters the keyboard control mode. Note: For superscript symbols, press the Shift key and the corresponding key at the same time. For example, Shift+1 to type ‘!’, Shift+2 to type ‘?’TROUBLESHOOTINGThe media remote has no power or functionality. If your remote does not perform any functions, replace the batteries with fresh ones. Make sure that they are placed in the right position. It may be necessary to re-pair the remote with the USB receiver (see Step 4 on the previous page for instructions).Note: When low on power, the backlight lights for one second, then blinks intermittently.The media remote will not work with certain apps.The media remote is designed to work with most apps. However, some apps may not be designed for use with the media remote. Use your Xbox One controller for these apps.The keyboard does not work.The USB receiver should already be paired with your remote and should be ready to use. If the remote does not work (and you have tried new batteries), we suggest that you try to pair the USB receiver to the remote control.SPECIFICATIONSSAFETY INFORMATION/CAUTIONreplace with the same type of battery. • Do not mix old and new batteries.• Insert batteries with the plus and minus ends in the correct direction.• Remove batteries when they have reached the end of their life, or if the remote control is to be stored for an extended period of time.V1 ENGLISH 15-0398Power sourceExternal dimensions (W×H×D)Operating rangeOperating temperatureWireless technologyAAA batteries (2)Approximately 7.2 × 1.8 × .82 inches (184 × 48 × 21 mm)<10 m41°F~95°F (5°C~35°C)2.4 GHz and infrared radiationLEGAL NOTICESFCC informationThis device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Warningapproved by the party responsible for compliance could void the user’s authority to operate the equipment.Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.Visit www.insigniaproducts.com for details.CONTACT INSIGNIA:For customer service, call 1-877-467-4289 (U.S. and Canada) or01-800-926-3000 (Mexico)www.insigniaproducts.comRegistered in some countries. Distributed by Best Buy Purchasing, LLC©2015 Best Buy. All rights reserved.Made in ChinaBackspaceEnterDirection keysShift Caps lock Tabulator SpaceNS-GXBOMRK101_NS-GXBOMRK101-C_15-0398_QSG_V1_EN.ai 2 5/5/2015 5:06:02 PMRSS-Gen and RSS-210 statement:This device complies with Industry Canada licence-exempt RSS standard(s).Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.RSS-102 Statement:This equipment complies with Industry Canada radiation exposure limits set forth for an uncontrolled environment. Cet équipement est conforme à l'exposition aux rayonnements Industry Canada limites établies pour un environnement non contrôlé.

Navigation menu