ZEN Factory Group WLVSGCGPR Gamecube Wireless Controller User Manual RF GGC001 09 0477 QSG V1 EN indd

The ZEN Factory Group (Asia) Gamecube Wireless Controller RF GGC001 09 0477 QSG V1 EN indd

user manual

Product featuresControllerSTARTPOWERMACROReceiverRXPOWERCONNECT# Description1L button2Control stick3Start button4Macro indicator5R button6Z button7Y button8X buttonQUICK SETUP GUIDEWarnings:• Some medical studies have suggested that long periods of repetitive motion may be linked to certain types of physical discomfort or injuries. You should take frequent breaks during game play. If you feel aching, numbness, or tingling in your arms, wrists, or hands, consult a quali ed health professional.• Do not use the GameCube/Wii Wireless Controller if you have respiratory, heart, or other physical ailments that limit your physical activity. If you have any doubts, consult a quali ed health professional.• The GameCube/Wii Wireless Controller is not intended for use by small children. It may contain small pieces that may pose a choking hazard.• The GameCube/Wii Wireless Controller can emit radio waves that can a ect the operation of nearby electronics, including cardiac pacemakers.• Do not operate the GameCube/Wii Wireless Controller within nine inches of a pacemaker.• If you have a pacemaker or other implanted medical device, do not use the GameCube/Wii Wireless Controller without rst consulting your doctor or the manufacturer of your medical device.• Follow all regulations regarding use of wireless devices in locations such as hospitals, airports, and on board aircraft. Operation in those locations may interfere with or cause malfunctions of equipment, with resulting injuries to persons or damage to property.Safety information:• Do not disassemble any of the GameCube/Wii Wireless Controller components. Refer all servicing to quali ed personnel only.GameCube/Wii Wireless ControllerRF-GGC001• Do not place or store the GameCube/Wii Wireless Controller in a humid area and do not expose it to water or rain.• Read all instructions before operating the GameCube/Wii Wireless Controller. Use the GameCube/Wii Wireless Controller only as instructed. Failure to follow these instructions may void the warranty.Battery warnings:Incorrect use of batteries may result in battery uid leakage, overheating, or explosion. There is a risk of re if batteries are replaced by an incorrect type. Released battery uid is corrosive and may be toxic. It can cause skin and eye burns and is harmful if swallowed. To reduce the risk of injury:• Keep batteries out of reach of children.• Do not heat, open, puncture, or dispose of batteries in re.• Only use AAA alkaline batteries.• Do not mix new and old batteries.• Remove the batteries if they are worn out or before storing your controller for an extended period of time.• If a battery leaks, remove all batteries, taking care to keep the leaked uid from touching your skin or clothes. If uid from the battery comes into contact with skin, ush skin with water immediately. Before inserting new batteries, thoroughly clean the battery compartment with a damp paper towel, or follow the battery manufacturer’s recommendations for cleanup.• Dispose of batteries in accordance with local and national disposal regulations (if any).Package contents Wii/GameCube Wireless ControllerWii/GameCube Wireless Receiver ModuleQuick Setup Guide# Description9A button10 B button11 C stick12 Macro button13 Power button14 Power indicator15 RX indicator16 Connect buttonInstalling batteries1 Push the two battery compartment covers down to remove them. 2 Insert one AAA battery into each battery compartment. Make sure that the + and – symbols on the batteries match the + and – symbols in the compartments. AAAAAA3 Replace the covers.Connecting your controller to your game console1 For Wii: Open the door on top of the Wii console, then insert the receiver into the controller socket. See the instruction booklet for the game you are playing to nd out which socket(s) you need to plug the receiver(s) into. When the receiver is inserted correctly, the power light turns on and the RX light ashes. Or, For GameCube: Insert the receiver into the controller socket on the front of the console. See the instruction booklet for the game you are playing to nd out which socket(s) you need to plug the receiver(s) into. When the receiver is inserted correctly, the power light turns on and the RX light ashes. 2 Press the POWER button to turn on the controller. The controller will pair with the receiver automatically. When pairing completes, the RX indicator stops ashing and lights solid.Note: If you want to use more than one controller, you should pair the controllers one at a time.Note: If the controller does not automatically connect, follow these pairing steps in this order: 1 Press and hold the Connect button on the receiver. Do not release. 2 Insert the end of a paperclip into the tiny hole on the back side of the controller and push. Do not release. 3 Release the Connect button on the receiver. 4 Remove the paperclip from the controller.Programming a macroYou can program the Z button to perform a series of moves.1 Press the MACRO button. The indicator on the controller lights red.2 Press the Z button.3 Press the X, Y, A, or B buttons to create the combination of moves that you want (maximum 16 moves), then press the MACRO button again to save the macro. (If you make 16 moves, the macro is saved automatically, so you do not need to press the MACRO button again). The indicator turns o .4 To run the macro, press the Z button.5 To erase the macro, press the MACRO button, the Z button, then the MACRO button again.Legal noticesFCC/regulatory noticesChanges or modi cations not expressly approved by the party responsible for compliancewith the FCC Rules could void the user’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the followingtwo conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesiredoperation.90-day limited warrantyVisit www.rocket shproducts.com for detailsGameCube and Wii are trademarks of Nintendo of America, Inc. © 2009 Best Buy Enterprise Services, Inc. All rights reserved. All rights reserved. ROCKETFISH is a trademark of Best Buy Enterprise Services, Inc. Registered in some countries. All other products and brand names are trademarks of their respective owners. ENGLISH 09-0477

Navigation menu