ZIJIANG ELECTRONICS ZJ-5802DD Portable Thermal Printer User Manual 15 ZJ 5802DD UserMan r1

Download:
Mirror Download [FCC.gov]
Document ID	3445695
Application ID	Y4UFGpJMQ1Y8lgyu0hcW4w==
Document Description	15_ZJ-5802DD UserMan r1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	287.56kB (3594478 bits)
Date Submitted	2017-06-30 00:00:00
Date Available	2017-06-30 00:00:00
Creation Date	2017-02-14 16:19:25
Producing Software	Corel PDF Engine Version 14.0.0.701
Document Lastmod	2017-06-28 14:33:18
Document Title	58MINI 中性版 英文说明书 2017-02-14
Document Creator	CorelDRAW
Document Author:	Administrator

Version
F e b , 2017
Notice
58MM Portable MINI Thermal Printer
All rights reserved. Reproduction of any part of this manual in any form
whatsoever, without manufacturer’s express permission is forbidden.
The contents of this manual are subject to change without notice.
Instruction Manual
All efforts have been made to ensure the accuracy of the contents of
this manual at the time of going to press. However, should any errors
be detected, manufacturer would greatly appreciate being informed
of them.
The above notwithstanding, manufacturer can assume no responsibility
FCC ID: RVUZJ-5802DD
for any errors in this manual
Declaration
We have been carefully handling the manual and trying our best to
ensure the accuracy of the contents of this manual. But we still c an’t
promise it is always correct due to our products are being improved and
updated all the time. The contents of this manual will be updated without
notice at any time.
All of our products must be used under environments/locations which
are taken care by human being. We are not responsible f or a ny loss or
damages caused by any accident while the products are used without
taken-care by human being. If there are any products failures c aused by
human behaviors or natural disaster, we will not provide or just p rovide
partial free maintenance.
Please contact local agents for the latest information of the products.
Instruction Mannual
Notes on safety
This section presents important information intended to ensure safety
and effective use of the printer. Please read carefully.
Be sure to use the specified battery and power source provided by our
company. Connection to an improper power source may cau se fire ,
explosion or damage to the printer.
Don’t put the battery into the fire or water, don’t disassemble or modify
the battery, don’t be short circuit, otherwise may result in injury or f ire
even explosion.
If the printer would not be used for a long time, be sure to take off the
battery, otherwise the battery may leak the corrosive liquid o ut, if
improper op e ration causes battery leak, and the liquid is spattered on
the skin or clothes, please wash it with water immediately, if spattered in
the eyes, please rinse t h e m with water thoroughly and see a doctor.
58MM Portable MINI Thermal Printer
7、The power adapter that comes with this printer is specifically designed to be
only used with the printer, please do not use an alternative power adapter.or
use 9V-2A The standard power adapter.
8、In order to ensure print quality and longevity of your printer, please ensure
that only good quality thermal paper rolls are used.
9、Please keep this manual in a safe place, where it can be accessed easily
and used for your reference.
1.Features & Application area
一．Features
It can print 58mm width thermal paper
High-speed,Clear printing
Super power lithium electricity, standby time can reach 5-6 days
Auto sleep, auto awake, save electricity
Please don’t open the paper room cover when it is printing or just when
Small size、light weight、reliable performance、simple to connect、
printing is over, do not touch the print head with hand or body, overheat
easy to use
may cause scald.
二．Application area
Notes on using
1、 Do not store the printer in hot and humid conditions.
2.、The lithium battery have a character that if it is not used for several months,
i t possibly can’t be charged ever.
3、 The printer’s power adapter is to be connected to a stable power 110~220
Volts, please do not use other devices on the same power socket, to avoid
voltage fluctuations.
4、 Avoid water or conductive material (for example: metal). If water is present
on the surface please turn off the power immediately.
5、 Please ensure that a thermal paper roll is always inserted in the printer to
avoid damaging the printing roller and the printer head.
6、 Please ensure that your printer is serviced and repaired by a qualified
technician. No responsibility is taken for misuse and/or non-qualified
servicing.
Relative to the traditional thermal receipt printer, Mini portable printer has
smaller body, more reliable capability, more convenient printing and portable
advantages. The Mini printer can be worked on a lots of locations, such as the
TAXI bill printing, administrative fees receipt printing, post receipt printing,
restaurant ordering information printing, online payment information printing, etc.
With the rapid popularity of smart-mobile, Mini printer will be more widely used
in the near future.
2.Specification
PrintingMethod: Direct Thermal
Speed:≤90mm/sec
Reliability TPH Life: 100km
Resolution: 203DPI (8dot/mm)
Instruction Mannual
58MM Portable MINI Thermal Printer
Printing Width: 48mm (384dot)
Emulation: ESC/POS command
Paper Width: 58±01mm
Interface: standard RS232/USB, Bluetooth 3.0&4.0(option)/SPP agreement or
Roll Diameter: φ≤40mm
infrared/IRCOMM agreement (optional)/Android up to 4.0 operation system. Driver:
Paper Type: Thermal Paper
Win2003/Win2000/Win7/WinXP/VISTA/WIN8/Win10/LINUX
Power: rechargeable lithium battery/NI-MH battery
Working Temperature: -10～50℃ ; Humidity: 10～90%
Battery: 7.4VDC, 1500mAh
Charging mode: DC 9V/1.5A
Print parameters: support to download the Logo trademark, support bar-code
3.Appearance
print.
Support bar-code types: UPC-A / UPC-E / JAN 13 (EAN13) / JAN8 (EAN8) /
CODE39 / ITF / CODABAR / CODE93 / CODE128 ; Two-dimensional code:
QR CODE
Character size: 384 dots/line
FontA:12*24dots,1.5(W)*3.0(H)mm
FontB: 9*17dots, 1.1(W)*2.1(H)mm
FontC: 9*24dots, 1.1(W)*3.0(H)mm
Simplified/Traditional:24*24dots,3.0(W)*3.0(H)mm
Printing Chinese character: Chinese: simplified Chinese 24x24 point. support
GB18030 font library, support Taiwan and HK traditional(complex font)
ANK: ANKcharacters
Charging: Red Light
Full: Blue Light
Language: support for multiple languages
9V DC
(Support Traditional, Korean, Japanese, etc. must be instructed before
purchased )Extended character table:
OEM437/Katakana/OEM850/OEM860/OEM863/OEM865/West Europe/Greek
/Hebrew/EastEurope/Iran/WPC1252/OEM866/OEM852/OEM858/IranII/
Model:5801
Latvian/Arabic/PT1511251/OEM747/WPC1257/Vietnam/OEM864/Hebrew/
Size:103*75*46mm
WPC1255/Thai
Weight:134g( without battery )
Instruction Mannual
58MM Portable MINI Thermal Printer
Charging: Red Light
Full: Blue Light
Unconnect: Light off
Connect: Light (Green )
Charging: Red Light
Full: Blue Light
9 V DC
Model:5807
Size:112*82*53mm
Weight:210g( without battery )
Model:5802
Size:102*78*46mm
Weight:134g( without battery )
Charging: Red Light
Full: Blue Light
4.Communication Interface
1. RS232(COM)：standard RS232 Communications Protocol
2. Bluetooth 3.0/4.0：standard Bluetooth 3.0/4.0 Communications Protocol
3. USB：standard USB Communications Protocol
Model:5805
Size:107*79*51.5mm
9V DC
Weight:192g( without battery )
Instruction Mannual
4-1. RS-232 Serial (COM) Interface
58MM Portable MINI Thermal Printer
However, the printer usually works only on r eceiving data, it d oesn’t
RS-232 is developed according to the EIA standard asynchronous
transmission, the specifications are as following:
have to respond anything back to the host , then TXD signal can be ignored ,
and then the connection can be sampled as following:
Data transmission: serial interface
Synchronization:
Signal Level:
asynchronous
RS-232 level, logic 1:-5.4v, logic 0 : +5.4v
Hardware Flow Control: None
Baud rate:
Host
TXD
GND
GND
2400pbs to 115200pbs is optional
Data word length:
Stop bit:
Printer
RXD
4-2. Bluetooth Connection
8 bits
Bluetooth is a proprietary open wireless technology s tandard for e xchanging
1bit
data over short distances ( using short-wavelength radio transmissions in the
Parity: None
Users can get the current baud rate from the printer self-testing page.
ISM band from 2400–2480 MHz) from fixed and mobile devices,c reating personal
Serial cable: We have made the cable specially using mini port like Mini
area networks (PANs) with high levels of security.
USB port which connects the printer .The following picture shows the
4-2-1. Bluetooth specification
signal definition of the RS-232 Serial interface:
Using blueCore4-Ext chipset, fully compatible with Bluetooth 3.0;
The connection between the printer and host follows the following
rules:
Printer
Host
High-sensitivity receive signal, small size, lower consumption
TXD
RXD
RXD
TXD
GND
GND
Supporting 1200bps ~ 1382400bps variety of baud rate;
Supporting SPP agreement, the maximum transfer speed is up to 3Mbit / s;
4-2-2. Use “AT” command to modify Bluetooth Module’s parameters
Notice: The following changes can’t be done by user, these should be
done in factory by Manufacturer. So if user wants to change these parameters,
please inform our sales person before ordering our printers.
Modify name---Send character string “AT+NAMEXXXX, feedback “Okname”;
For example, if you want change name to “Bluetooth Printer”, please
send string “AT+NAME Bluetooth Printer”.
Modify PIN code--- Send character string “AT+PINXXXX, feedback “Oksetpin”;
For example, if you want change PIN code to “8888”, please send string” AT
+PIN8888”.
Instruction Mannual
58MM Portable MINI Thermal Printer
Paper diameter Max 40mm.
(Note: Default PIN code is “1234”, you only can reset PIN code with four
Thermal paper installation method is as follows:
figures.)
（1） Open the printer top cover
Clear Bluetooth address--- Send character string “AT+CLR00”, feedback
（2） Thermal Paper as follow Graph to put into paper storehouse
“Okclear”;
Modify baud rate--- Send character string “AT+BAUDX, feedback “Ok+
current baud rate”; X represents the baud rate code, as following:
1-----1200
7------ 57600
2----- 2400
8------ 115200
3----- 4800
9------ 2 30400
4----- 9600
A------ 460800
5----- 19200
B------ 921600
6------38400
C------1382400
For example, if you want to change baud rate to 115200bps, please send
string “AT+BAUD8”.
4-2-3. Build connection.
1. Turn on the printer;
2. Search for the Bluetooth device with host device;
3. If there are other Bluetooth devices, please select “LY58”(for example)
printer;
4. Enter default pairing code “1234”
5. Pairing succeed.
4-3. USB Interface
The printer is connected by standard Mini USB cable(included in accessories)
for communication. The USB type belongs to slave device type.
5.The installation of the paper roll
The printer use 58MM thermal paper, and adopt to easy paper loading. So
（3）Put out a little of the paper outside printer,then close the top cover.
（4）Use paper sawtooth tear off redundant paper
Button Operating Instructions
POWER（Blue Light）
FEED（Red Light ） Printer Status
OFF
OFF
Printer Close
ON（Always）
OFF
Printer open and have paper
ON(Always）
Flash
Printer Open , without paper
Under the normal working status, the paper feeding The printer paper feed
begins when press 【FEED】 button, and stop when
loosen【FEED】 button.
Power off the printer, then hold down the【FEED】 The printer Self test
button and press the power button at the same
time. Wait 2 seconds ,then loosen the【FEED】
button,the current setting will be printed out.
Power off the printer, then hold down the【FEED】
button and press the power button at the same
time. Wait until the power indicator &【ERROR】
led are both on, and then 【ERROR】led goes off,
then loosen the【FEED】button, the language
setting status will be printed out.
the paper is very convenient install.
10
Transformation in both
English and Chinese
58MM Portable MINI Thermal Printer
Instruction Mannual
Step 2:
- Find the File Named “ SDK” from the CD driver, Then follow the path : “ Android
SDK---BLUETOOTHDEMO ----bin----BT-POSPrinter.APK “ , and install it into your
Android device.
Power off the printer, then hold down the【FEED】 Set printing density
button and press the power button at the same
time. Wait until the power indicator &【ERROR】
led are both on, and then 【ERROR】led goes out,
after, 【ERROR】led goes on again ,then loosen
the【FEED】button, the density setting status
will be printed out. (It has three levels setting for
printing density, it is a circle Low level Middle
level High level
Low level…, Please switch
the density status by repeating operation presented
above.)
Power off the printer, hold down the【MODE】
Hexadecimal printing
button and press the power button at the same
time. Wait until the power indicator &【ERROR】
led are both on, and then 【ERROR】led goes
out, then loosen the【MODE】button. The printer
turns into the hexadecimal printing mode and
print the presentation.Way to quit hexadecimal
printing : The way to quit hexadecimal printing
mode is switch off the printer .
6.Operating Manual for Android OS
Step 3:
- Connect your Android device with our printer once the installation done .
Step 4:
- Find this icon
on the Android device, and click “Connect Printer” to search the
Bluetooth printer, (Default pairing password for Bluetooth connection is “ 1234” ) .
After the connection successfully, click on the "Print Test Page", the printer will work
If you use the "Ethernet interface", "USB" communication, replace "
BLUETOOTHDEMO" from "Step 2" into the corresponding "NETDEMO", "USBDEMO" .
Please noted, the customers can get all the original code from below path if you need to
develop your own APK ( Path is : src
com
zj
7.Operating Manual for IOS APP
1. Download the Test Tools “POS-PrinterV1.0” from App Store,as below:
This manual applies to all of our android OS compatible printers
( both 58mm & 80mm width printer)Currently, the common communication ports we
used for android OS are ( USB、Ethernet、Bluetooth )
If you want to use Android Device connected with our printer, first of all
make sure that printers can be supported Android Operate System, proceed
as follows ( Bluetooth as example):
Step 1:
- Insert the CD driver disc into the CD-ROM, connect your Android device
with your computer;
( Image 1)
11
printdemo )
12
Instruction Mannual
58MM Portable MINI Thermal Printer
2. Turn on the Bluetooth setting of IOS device , then click “POS-Printer”:
3. Into the App of “POS-Printer”, select the paper width as below:
5, If connect with Bluetooth, then you can click “ Select Printer” first, you will search
the “Bluetooth Printer” (the default name of printer is Bluetooth Printer), click it to
be connected.
(Image 3)
4. Select the way of communication of printers, “Bluetooth” :
13
14
Instruction Mannual
58MM Portable MINI Thermal Printer
6, If above steps are successful, then you can print text to have a test:
7, Other features of this APP:
① Send HEX: In the text box, enter the hexadecimal data, click “Send HEX”, then
can send text box hexadecimal data to the printer.
② Print Image mode: input data in the text box, click "Print Image mode", you will
be able to convert the contents of the text box into a image printed
③ Open Casher: If your printer is connected with the cash drawer, click "open
casher", the drawer will be opened (portable printers without drawer interface,
this feature does not work).
④ Cut paper: After click on it, the paper will be feed out and cut (portable printers,
58 series of printers without cutter, this feature does not work).
⑤ Self Test: Click the "self-test", the printer will print out a self-test page (because
the Bluetooth printer has been connected to the device, then the Bluetooth
name or MAC address will be not displayed in the self-test page ).
⑥ Beep: Click the "Beep", the printer will beep sound (portable printers, 58 series
of printers without buzzer, this feature does not work).
⑦ Print test page: Click the "Print Test Page", the text will print a section of the
test, to confirm that the printer
9.The applicable version: can be compatible with IOS6.0 or above versions.
15
16
Instruction Mannual
58MM Portable MINI Thermal Printer
8.The Bluetooth configuration
Step1: Make sure your device ( like PC, Note Book ) has B luetooth function,
then once the Bluetooth for your device is activated, you will see the Bluetooth
sign
showed in the right bottom side of your device(like PC) screen.
Step4:if you can see screen as below,then the device is searching the bluetooth
printer,please wait.
Step2:Power on the Bluetooth printer.
Step3:To add the Bluetooth printer, please left-click the
click “Add
a Bluetooth Device” ,then you will enter wizard screen , please choose “My
device is set up according and ready to be found”click “Next”(showed as below).
17
18
Instruction Mannual
58MM Portable MINI Thermal Printer
Step5:Once the Bluetooth printer is found. You can see it listed on the screen,
click “Next”
( Note: The Bluetooth device will automatically assign a COM port.)
Step8: Now if you want to test if the printer is OK to print, you could use a com
tool , and send printed data to Outgoing COM port( just as above image shown:
COM5).
Step6:Choose “Let me choose my own passkey”, then enter “1234” ( this is
(Com tool setting is 9600,N,8,1.)
factory default passkey, if you want to change it, you have to inform us to
set the new passkey for you in our factory before shipping), t hen click “Next”.
9. USB port to be used
1.Insert the CD-ROM,click on the file(58/80 series printer driver software )to
star to installation ,select the language appears as you need to install the
driver,as shown below:
Step7:if you can see the screen as below, that means the Bluetooth printer is
already connected. Please notice the assigned COM ports ,then Click”Finish”.
19
20
Instruction Mannual
58MM Portable MINI Thermal Printer
4.Click :Next”after the operation in the below figure(Customer can also modify
the path of the driver can choose the default installation path)
2.Then select the language click “OK”,as shown below ,click”Continue”to next
step.
5.Then click”Next”after the operation as shown below ,choose “install”, if you
computer has antivirus software ,appears to block the installation of the
windows allow this operation.
3.please read the following License Agreement ,accept and continue the
installation , as shown below:
21
22
Instruction Mannual
6.Wait for the installation interface appear as follows after the completion ,
58MM Portable MINI Thermal Printer
8.Completing the driver installation ,as shown below:
choose your computer’s operating system ,then select the printer model
(POS58 series printer),if you use a USB interface to communicate , click
“USB Port Check”automatically recognize the computer USB port ,click
Next to continue ,as shown below:
7.Click Begin Setup ,as shown below appears ,select “install”or “ install this
driver software anyway”
If the printer prints a normal page, then it shows that the work was successful.
Note: If the printer prompts "Print Error", please return to the "port" option from
the "USB001" started trying to choose
23
24
Instruction Mannual
58MM Portable MINI Thermal Printer
10. Serial (COM) port to be used
1. Open the Printer Properties screen, and then select the "Port" item, as shown
115200
below:
You can see the setting parameters of serial port from self-test page, Click
"Apply", then click "OK" (Note: This setting must consistent with the setting
parameters of serial port from the printer self-test page, otherwise it will be
garbled case) appears as shown below:
2.Select the list of ports "COM1" → "Configure Port", the printer factory
default settings as shown below:
25
26
Instruction Mannual
58MM Portable MINI Thermal Printer
Click "Apply" again.
3.Return to the "General" tab, click "Print Test Page" as shown below:
11.Cleaning of printer head
Cleaning of printer
When the printer has the following conditions, you should clean
the printer head:
The printer does not print clearly and the thermal paper is Ok.
The printer Print pages lengthways is not clear
It’s getting too noisy while feeding paper or printing.
Printer head cleaning steps are as follows:
1. Power off the printer and open the paper room cover. Remove the
thermal paper roll.
2. If the printer just finished printing , please wait for the print head to
cool down.
3. With a soft cotton cloth dipped in ethanol (please make sure there is
If the printer prints a normal page, then it shows that the work was successful.
If you feel the print speed is slow, please click on the "Device Settings" →
"Print Mode" → Choose "soft font" button as shown below:
no dripping), wipe the thermal printer head gently and remove any
dust or stains.
4. Wait for the complete evaporation of any ethanol, then place the
thermal paper roll back in the printer and close the paper room cover,
then print a test page.
Notes：
When the printer maintenance must ensure that the power is shut down
Hands or other metal tools away from the surface of the printer head,
do not u se tweezers to scratch the surface of the printer head and
other sensitive p a rts.
Do not use gasoline, acetone and other organic solvents for printer
head cleaning.
27
28
Instruction Mannual
12.General Troubleshooting
58MM Portable MINI Thermal Printer
9. The printer can't work
A：The battery maybe without electricity，please use power adapter to
charge. Then you try to star the printer, if the printer has same problem, please
1: Why serial port printer printing messy code?
A: Ensure the baud rate setting in the PC is same as the printer baud rate.
( we can see printer baud rate from self test page)
2: Self printing test is ok,but printer does not work after driver installation.
send to service center for repair.
10. Can not search the Bluetooth printer
A：Please check the equipment "Bluetooth" function whether opened, the
communication whether normal, then replug the printer "Bluetooth Module"
A: Recheck the installation according to above installation wizard and see
try to connect and search “Bluetooth” again, if the problom are still existed,
if we selected the right port or ask service center for advice if needed.
please send the specified location repair.
3: Malfunction of paper feeding?
A: Use soft brush to clean the paper sensor and try again or send it to the
service center for repair.
4．Malfunction of the indicator light
A: Check the cable connecting way / adapter / power cord / switch on or off?
Or contact the service center for repair.
5．Messy code printing except Arabic numeral printing.
A: language switching incorrectly, please use our tool "IPrinter" (you can find it
on the enclosed CD) to change the language what you want print.
6．Red indicator keep flashing during the printing.
A: Usually it is due to the high temperature of the print head. If printing stopped,
please contact the service center for repair.
7. Printing speed is very slow for serial printer
A: follow this path and change the set accordingly : Driver -- Properties -- Device
Settings -- Print Mode -- Print as soft font.
8. Water or other liquid spills into the printer
A: Cut off the power,we can dry the main board or printer head with a hair dryer,
careful of the temperature ( average 50 degree is ok )
29
30
FCC warnings:
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
This modular complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.6-c015 81.157285, 2014/12/12-00:43:15
Format                          : application/pdf
Creator                         : Administrator
Title                           : 58MINI 中性版 英文说明书 2017-02-14
Create Date                     : 2017:02:14 16:19:25+08:00
Creator Tool                    : CorelDRAW
Modify Date                     : 2017:06:28 14:33:18+08:00
Metadata Date                   : 2017:06:28 14:33:18+08:00
Producer                        : Corel PDF Engine Version 14.0.0.701
Document ID                     : uuid:cdb2b48a-77fa-4bd7-95ba-3a61a6e1b7e9
Instance ID                     : uuid:d8df353d-cc67-452f-baed-3215baff247c
Page Count                      : 17
Author                          : Administrator

EXIF Metadata provided by EXIF.tools