ZIONCOM ELECTRONICS IP04349 AC2600 Ultimate Wireless Dual Band Gigabit Router User Manual
ZIONCOM ELECTRONICS (SHENZHEN) LTD. AC2600 Ultimate Wireless Dual Band Gigabit Router
User Manual
Model: A7000R，A7000RU Tablet
Smartphone
PC
Modem
Default wireless network names (SSIDs):
2.4GHz Wi-Fi: TOTOLINK_A7000R; 5GHz Wi-Fi: TOTOLINK_A7000R_5G
LEDs Status Description
CPU LED
On The router is booting or WPS is enabled.
Blink slowly working normally.
Blink quickly When the reset process is being proceeded.
Off The power is off.
WAN LED
On The WAN port is connected to a Modem or the in-wall
wired Ethernet jack.
Off The WAN port is disconnected.
LAN LEDs
1 through 4
On The LAN ports are connected to the PCs.
Off The LAN ports are disconnected from the PCs.
Interfaces and
Buttons
Description
Power Connector Connect to an electrical outlet with the supplied power
adapter.
WAN Connector Connect to a Modem or the in-wall wired Ethernet jack.
LAN 1 through 4
Connectors Connect to the PCs.
RST/WPS Button
Enable WPS function: when the router is powered on, press
and hold this button for 1 second until the panel CPU LED
turns solid on.
Reset to factory defaults: when the router is
powered on, press and hold this button for 5 seconds or more
until the CPU LED blinks quickly.
LEDs, Interfaces, Buttons
Setup via Smartphone
TOTOLINK_A7000R_5G or TOTOLINK_A7000R
C. Launch a web browser from your smartphone.
D. In the address bar, type the router’s IP address 192.168.0.1,
and then touch Enter. Enter the de-fault user name admin
and password admin , and then touch LOGIN.
A. Select a WAN connection type, for example, PPPoE.
Enter the user name and password provided by your
Internet service provider, and then touch Next
C. Please wait while the settings are being applied. D. When the message Setup Successfully appears, it means
that wireless setup is complete.
Setup via Smartphone
1.Check your computer’s IP address, make sure it is set to
“Obtain an IP address automatically”. Steps: right click
Network—Properties—Change adapter settings---
Local Area Connection—Properties—Internet Protocol
Version 4(TCP/IPv4).
2.Make sure you enter the correct default access:
192.168.0.1. Try again.
3.Use another web browser and try again.
4.Reboot your router and try again.
What can I do if the login page does not
appear?
1
1.Check the Internet status by connecting a computer
directly to the modem via Ethernet cable. If it is not working
properly, contact your Internet Service Provider.
2.Setup your router again according to part 2 Configure the
Router.
3.Reboot your cable modem (if have) and router, then try
again.
What can I do if I cannot access the Internet?
2
By default, TOTOLINK router don’t have any wireless
network password.
If you have set one, please log in to router’s Web
Management page, go to 5G Wireless---Basic
Settings or 2.4G Wireless --- Basic Settings to
obtain or reset your password.
What can I do if I forget my wireless network
Password?
5
What can I do if I forget the router’s Web login
User Name and Password?
In case you changed your router’s Login User Name and
Password, we suggest you reset your router to factory default
settings by above operations.
Then use the following parameters to login the router’s
Web interface: Default IP address: 192.168.0.1, User
Name: admin, Password: admin
4
Keep the router powered on, press and hold the RST/WPS
button for 5 seconds or more until the front panel CPU LED
blinks quickly. It will restore to factory default settings.
How to reset the router to factory default
Settings?
3
(Frequently Asked Questions)
FAQ
32
A. Make sure that the router has power.
Log in to the router
B. Use your smartphone to find and select
2
Touch Quick Setup to set up your router.
2
B. Configure the SSIDs and passwords in 5G and 2.4G
Wi-Fi, and then touch Finish.
Hardware Installation
1
Quick Installation Guide
AC2600 Ultimate Wireless Dual Band Gigabit Router
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits
set forth for an uncontrolled environment .
This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
This equipment should be installed and operated with minimum
distance 20cm between the radiator& your body.
5150-5250MHz is restricted for indoor use only in all EU
member states.
AT BE CY CZ DK EE FI
FR DE EL HU IE IT LV
LT LU MT NL PL PT SK
SI ES SE UK BG RO HR
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
Measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for
help.
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules.
These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However,there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception,which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following
(1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including
interference that may cause undesired operation.changes or
modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the
equipment.
NOTE:
1. Please disconnect the power adapter and all cables during
thunderstorm weather;
2. Keep away from heat source and keep well ventilated;
3. Please pay attention to the waterproofing and
moisture-proof when storing, transporting and running.
4. Please use the power adapter provided with the router.
NOTE:
Copyrights © 2017 TOTOLINK. All Rights Reserved. http://www.totolink.net
Information in this document is subject to change without prior notice.
V1.0 |1802 (Take A7000R as an example)
4FCC warning
Router
Outlet
, IP04349