ZIONCOM ELECTRONICS WX009 AC1200 Dual Band Wi-Fi Range Extender User Manual
ZIONCOM ELECTRONICS (SHENZHEN) LTD. AC1200 Dual Band Wi-Fi Range Extender
User Manual
The Wi-Fi network âTOTOLINK_extender_setupâ is not connected to the Internet Use Other Network Cancel Apple IOS device UI Oqfg 2.4GHz Yktgnguu"Ugvwr 2.4GHz 2.4GHz 5GHz 5GHz 2.4GHz 2.4GHz 5GHz 5GHz 2.4GHz 2.4GHz 5GHz 5GHz 2.4GHz 2.4GHz 5GHz 5GHz 2.4GHz 2.4GHz 5GHz 5GHz 2.4GHz 2.4GHz 5GHz 5GHz 2.4GHz 2.4GHz 5GHz 5GHz 2.4GHz 2.4GHz 5GHz 5GHz SSID Use Without Internet Quick Installation Guide 1 Quick setup for EX1200M Mode Ejcpig 2.4GHz->2.4GHz and 5GHz Wireless AC Range Extender 2.4GHz 2.4GHz 5GHz 5GHz 4BWFTFUUJOHďžMFGUTFDPOET áŹâ˝§ â˝§ APs """""APs âŤâ˛ŰĽâŹ ujqy ujqy 4ZTUFNJTCFJOHSFTUBSUFEďž Cxckncdngf Cxcknc &YUFOEFS*1"EESFTT 192.168.0.254 2.4GHz 44*% TOTOLINK_DC7C 5GHz 5G G áľăĽăˇăä¤ă 5GHz 44*% 5050-*/,@%$$@( Port Power 5GHz WPS buttonďź2.4GHz WPS buttonďźPower ON/OFF toggle switchďźRST button 2.4G signal LEDďź5G signal LEDďźPower LEDďźCPU LEDďź 5G EXT LEDďź2.4G EXT LEDďźLAN LED show Save settings and restart Modes Work with both the wireless router and client devices in 5G network. (Default) V1.1710 Copyright Š 2017 TOTOLINK, All Rights Reserved. Website: http://www.totolink.net Information in this document is subject to change without prior notice. Work with the wireless router in 2.4G network and client devices in 5G network. After the Extender restarts, its original SSIDs wonât display on your cell phone. Use your device to find and connect to the new extended network with the same Wi-Fi SSID and password that you use for the wireless router. < Settings networks. networks. 2.4GHz/5GHz 2.4GHz: 300Mbps / 5GHz: 867Mbps Advanced tools Cell phone UI and APP Environment corresponding network. (Crossed) ! 2.4GHz Wireless Setup F4-28-53-4F-1D-08 SSID 64-09-80-4C-12-E2 Rcuuyqtf 5G signal LEDs: The number of lit LEDs indicates the wireless signal strength in 5G network between the Extender and the wireless router. The strength increases with the number of lit LEDs. TOTOLINK_DC7C_5G 2.4G signal LEDs: The number of lit LEDs indicates the wireless signal strength in 2.4G network between the Extender and the wireless router. The strength increases with the number of lit LEDs. CMCC Other⌠WPA2/Ejcppgn11/100% Ask to Join Networks WPA2/Ejcppgn11/100% TOTOLINK_test2 D8-38-FC-77-96-68 rcuuyqtf use Connect show D8-38-FC-37-96-68 5GHz Yk Yk/Hk Check Fkucdngf Ceeqwpvv Place the Extender within the range of your wireless router, plug it into an electrical outlet, and then move the toggle switch to âONâ position.The Power LED turns solid on. WPA2/Ejcppgn6/44% TOTOLINK_test3 Connect WPA2_ENTERPRISE/⌠TOTOLINK_test4 D8-38-FC-B7-96-68 OPEN/Ejcppgn6/31% TOTOLINK_DC7C F4-28-53-31-03-E8 WPA2/Ejcppgn1/91% In the âPasswordâ field, type the network password, and then touch âCheckâ. If the message âAvailable networkâ is shown below, it means that the SSID and password are verified correctly and that you can continue with the following steps. 2 Adjust the position of the Extender As long as the setup on the Extender is finished, it wonât change unless you perform the reset operation. You can move it to another place within the wireless range and experience the extended distance of your Wi-Fi network. In order to get a better effect of the signalsâ extending, please ensure there are at least two signal LEDs light up. Otherwise, please adjust the position of the extender. 2.4GHz Wireless Setup UUKF TOTOLINK_DC7C Search APs rcuuyqtf ujqy use Available network. Check 5GHz Yktgnguu"pgvyqtm Fkucdngf Solid on: the Extender is exchanging 5G data with the wireless router. Off: no 5G data is being transmitted between the Extender and the wireless router. TOTOLINK_DC7C TOTOLINK_test1 Flash every two seconds: the Extender is working properly. Solid on: it lasts for 2 minutes when WPS button is pressed. Flash quickly: when the reset process is being proceeded. Wi-Fi 2.4GHz áľăĽăˇăä¤ă áľ TOTOLINK_test SSID Description Solid on: the power is on. Off: the power is off. CHOOSE A NETWORK⌠Touch âSearch APsâ to search for 2.4G networks within the range according to default 2.4G band mode. You can also manually change it if required. Search APs 1 Quick setup for EX1200M LEDs Solid on: the Extender is exchanging 2.4G data with the wireless router. Off: no 2.4G data is being transmitted between the Extender and the wireless router. (Paralleled) Working environmentďź32Ę~122Ę (0â~50â), 10%~90% (Non-condensing) Storage environment: -40Ę~158Ę (-40â~70â), 5%~90% (Non-condensing) LEDs description Wi-Fi 4.6" x 2.6" x 2.8" Wireless Speed Work with the wireless router in 5G network and client devices in 2.4G network. Description Work with both the wireless router and client devices in 2.4G network. 2 * external 5dBi fixed antennas Frequency range Model ďźEX1200M Band modes for switching frequency ranges AC 100V~240V / 50~60Hz LEDs Antenna use password 1 *10/100Mbps RJ-45 port Button Dimension (W x H x D) Account admin IEEE802.11ac, IEEE802.11a, IEEE 802.11n, IEEE 802.11g, IEEE 802.11b IEEE 802.3, IEEE 802.3uďźIEEE 802.3x ejgem em Disa Disabled abled bled ed Account 3 Specifications Standards TOTOLINK DC7C TOTOLINK_DC7C Note: * Place the Extender in an open space, and keep the number of walls and ceilings between to a minimum. * Keep away from electrical devices that are potential sources of electromagnetic interference, including microwaves, Bluetooth devices,or other 2.4 GHz household appliances. Touch âSave settings and restartâ at the bottom, and then âOKâ.This will reboot the extender. It may take a minute, please wait. A message appears to show you the Wi-Fi settings of the extended wireless router. 5GHz Wireless Setep Disabled FCC warning: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesired operation. changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However,there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. RF Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment . This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. #$& +&!&! 4 '"2 Q1: What are the additional two wireless network names âTOTOLINK_ extenderâ and âTOTOLINK_extender_5Gâ except for âTOTOLINK_ extender_setupâ? A1: You can use these two SSIDs to connect to the Extender wireless network and login for advanced settings through the IP address 192.168.0.254 in the browser from your cell phone or computer. Q2: When setting the Extender to connect to the wireless router, what should I do if I want to use the new SSID and password for the extended network instead of the original ones of the router? A2: You can connect your cell phone or computer to the Extender network using the SSIDs âTOTOLINK_extenderâ and âTOTOLINK_extender_5Gâ and type the IP address 192.168.0.254 in your browser for login. Account Use any wireless network manager utility on your cell phone to find and connect to the Extender wireless network name (SSID) âTOTOLINK_extender_setupâ. Account wug Password ujqy Note: * The SSID may be too long and are only partially displayed. Try to touch them to view their full names. After the wireless connection is established, a browser from your cell phone should automatically open and take you directly to the on-screen setup guide. Touch âChangeâ to set the Extender to a band mode as needed. The default the Extender in this manual. Note: * You can also use the default IP address 192.168.254.1 in a browser to access the Extender network setup guide after you connect the SSID. * To prevent Web connection failure between the Extender and your Apple iOS device, touch the message âDonât connect to the Internetâ. Q3: If I want to change the Extender to extend another Wi-Fi network within the range but cannot access its configuration page now, what should I do? A3: Restore the Extender to its factory defaults and then start configuration as needed. To reset the Extender, stick a paper clip into the side panel âRSTâ hole and hold it for over 5 seconds until the CPU LED flashes quickly. Save settings and restart Message System would be restarted APP connect again later. OK Cancel Ensure at least two signal LEDs light up Scan the QR code to download our cell phone App for quick setup.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Create Date : 2017:11:08 17:54:26+08:00 Creator : Adobe Illustrator CS6 (Windows) Modify Date : 2017:11:20 16:45:59-08:00 XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Format : application/pdf Title : TOTOLINK_EX1200M_WX009_英文说明书_171031 Metadata Date : 2017:11:20 16:45:59-08:00 Creator Tool : Adobe Illustrator CS6 (Windows) Thumbnail Width : 256 Thumbnail Height : 172 Thumbnail Format : JPEG Thumbnail Image : (Binary data 18483 bytes, use -b option to extract) Instance ID : uuid:5d67478d-b567-458e-af55-daaf83639de2 Document ID : xmp.did:87ED81FADBBDE7119B6CE5926EE25258 Original Document ID : uuid:5D20892493BFDB11914A8590D31508C8 Rendition Class : proof:pdf Derived From Instance ID : uuid:dae1eafa-d0e9-48b9-87b9-6468c3f351b1 Derived From Document ID : xmp.did:6004152501BBE711887DB174A97588A7 Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8 Derived From Rendition Class : proof:pdf History Action : saved, saved History Instance ID : xmp.iid:0180117407206811822AB503DA1327CA, xmp.iid:87ED81FADBBDE7119B6CE5926EE25258 History When : 2016:01:14 14:32:47+08:00, 2017:10:31 09:36:55+08:00 History Software Agent : Adobe Illustrator CS6 (Macintosh), Adobe Illustrator CS6 (Windows) History Changed : /, / Manifest Link Form : EmbedByReference, EmbedByReference Manifest Reference File Path : C:\Users\Administrator\Downloads\1508416553.png, E:\Bill\备份资料\龙淑珍\EX1200(WX008)\EX1200_PNG\EX1200(WX008)_001.png Startup Profile : Print Has Visible Overprint : False Has Visible Transparency : True N Pages : 1 Max Page Size W : 490.028315 Max Page Size H : 315.904232 Max Page Size Unit : Millimeters Font Name : Arial-BoldMT, ArialMT, Arial-ItalicMT, 109-CAI978, Arial-Black, TimesNewRomanPSMT, TimesNewRomanPS-BoldMT, MicrosoftYaHei, HiraginoSansGB-W3, SourceHanSansCN-Normal, SourceHanSansCN-Medium, AdobeSongStd-Light Font Family : Arial, Arial, Arial, 109-CAI978, Arial, Times New Roman, Times New Roman, Microsoft YaHei, 冬青黑体简体中文, 思源黑体 CN, 思源黑体 CN, Adobe 宋体 Std Font Face : Bold, Regular, Italic, Regular, Black, Regular, Bold, Regular, W3, Normal, Medium, L Font Type : Open Type, Open Type, Open Type, TrueType, Open Type, Open Type, Open Type, TrueType, Open Type, Open Type, Open Type, Open Type Font Version : Version 2.90, Version 2.95, Version 2.90, Version 1.00 December 15, 1992, initial release, Version 2.35, Version 5.20, Version 5.20, FrLt DFGirl v0.01, Version 3.10, Version 1.000;PS 1;hotconv 1.0.78;makeotf.lib2.5.61930, Version 1.000;PS 1;hotconv 1.0.78;makeotf.lib2.5.61930, Version 5.002;PS 5.002;hotconv 1.0.49;makeotf.lib2.0.15106 Font Composite : False, False, False, False, False, False, False, False, False, False, False, False Font File Name : arialbd_0.ttf, Arial_0.ttf, ariali_0.ttf, 109 cai978.ttf, ariblk_0.ttf, times.ttf, timesbd.ttf, , 冬青黑体简体中文W3.otf, SourceHanSansCN-Normal.otf, SourceHanSansCN-Medium.otf, AdobeSongStd-Light.otf Plate Names : Cyan, Magenta, Yellow, Black Swatch Group Name : 默认色板组 Swatch Group Type : 0 Swatch Colorant Swatch Name : AutoCAD Color Swatch Colorant Type : PROCESS Swatch Colorant Tint : 100.000000 Swatch Colorant Mode : CMYK Swatch Colorant Cyan : 74.901998 Swatch Colorant Magenta : 67.843097 Swatch Colorant Yellow : 67.058802 Swatch Colorant Black : 90.196097 Producer : Acrobat Distiller 9.0.0 (Windows) Page Count : 1EXIF Metadata provided by EXIF.tools