ZMODO Technology H0016 Beacon User Manual 1

ZMODO Technology Shenzhen Corp. Ltd. Beacon 1

Users Manual

Pivot Quick Start Guide342. SupportHaving difficulty?For more instructions, troubleshooting, support, and other resources, please visit:                   www.zmodo.com/supportLike us on Facebook.com/Zmodo  Scan the QR-code!Follow us on Twitter @Zmodo Scan the QR-code! 3. Connect with us!REV-A001 2Quick Start GuideBeaconThe Zmodo Smart Accessories Kit provides a full solution to monitor your home. All devices can be connected and controlled through the Zmodo app. The following describes the main features of this system.1. Connect your BeaconThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help.Remove the plastic tab to power on the Beacon. In order to connect your Beacon, access your Beam’s Device Settings and select the "Accessories" option. Select the   icon to add +an accessory, follow the on-screen instructions, and when prompted, push the Beacon to pair it with your Beam. Note: In order to replace the battery (CR2032), you can open the Beacon by inserting a screwdriver into the slot where the plastic tab was originally located and carefully prying it open. Beacon: When paired with a Beam, the beacon sends an alert for help to paired smart devices and phones. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Model: SA-H0016

Navigation menu