ZMODO Technology I11123BK IP-CAM User Manual Wireless Wired Network Camera

ZMODO Technology Shenzhen Corp. Ltd. IP-CAM Wireless Wired Network Camera

Users Manual

IPCAM User Manual1Wireless/WiredWireless/WiredWireless/WiredWireless/Wired NetworkNetworkNetworkNetwork CameraCameraCameraCameraNightNightNightNight VisionVisionVisionVision &&&& RemoteRemoteRemoteRemote OperationOperationOperationOperationUserUserUserUser ManualManualManualManual
IPCAM User Manual2Thank you for buying our IP camera.This Series Products are designed and equipped for network video surveillancesystem, including wired IP bullet camera, wireless IP bullet camera, IP IR domecamera, IP IR waterproof camera etc. We adopt high performance chip to ensure highquality media processor which processes audio and video collection, compression andtransmission. Standard MJPEG compression format ensures clear and streaming videoperformance. It enables users to view via IE browser, centre management softwareclient software;AJ series product s are applicable for big, medium-sized and small enterprises, chainstore, factory, home and all kinds of spots where remote network video transmissionand control supposed to be installed, They are easy to install and operate. Before theinstallation of the IP camera, please check if your product accessories inthe package are completeProductProductProductProduct ComponentsComponentsComponentsComponents andandandand FeaturesFeaturesFeaturesFeatures :IP camera ---------------------------------------------------------------------------------1 PCBracket （optional ）------------------------------------------------------------------- -1 PCPower adapter ----------------------------------------------------------------------------1 PCWarranty card-----------------------------------------------------------------------------1 PCCD------------------------------------------------------------------------------------------1 PCTableTableTableTable ofofofof CONTENTSCONTENTSCONTENTSCONTENTS1. General Introduction ...........................................................................................41.1. Product Specifications ................................................................................. ...51.2. Applications ................................................................................................ .... 51.3. System Requirements ...................................................................................... 52 . Interface & Installation ................................................................................. ..... 62.1. Interface ..........................................................................................................72.2. Installation ....................................................................................................... 82.2.1. Installation in LAN ....................................................................................... 82.2.2. PPPoE Installation ........................................................................................92.2.3. IP Camera & PC connection ......................................................................... 93. IE Browse to IP Camera..................................................................... ...............103.1. Use IP Finder Software .................................................................................. .11
IPCAM User Manual33.1.1. Configure Network Parameter .....................................................................123.2. Logging and Active X Installation...................................................................1 43.3. Main Operation Interface ................................................................................. 163.4. Operator Operation .........................................................................................1 73. 4 . 1 . Multi-Device Settings....................................................................... ...........1 83. 4 . 2 . Basic Network Settings......................................................................... ....... 203. 4 . 3 . Wireless Settings................................................................. ......................... 213. 4 . 4 . ADSL Settings.............................................................................. ............... 213. 4 . 5 . DDNS Settings.................................................... ......................................... 223. 4 . 6 . E-mail and FTP Services Settings.................................................... ............ 223. 4 . 7 . Alarm Services Settings ............................................................................... 233. 4 . 8 . Reset//Firmware Upgrade Settings............................................................... 243. 4.9 . Restore Factory Settings .............................................................................. 243. 4 .1 0 . Reboot Equipment Settings.......................................................................... 244 . Others ..................................................................................................................2 54.1. Port Forwarding Settings in Router ................................................................... 254.2 Warranty ............................................................................................................ 26
IPCAM User Manual4GeneralGeneralGeneralGeneral IntroductionIntroductionIntroductionIntroductionIP Camera is a new generation product with the combination of analog camera &IP video technology. Despite all functions which analog cameras have, IP camera cancompress and encrypt video and audio signal then send it to remote terminals throughinternet with its built-in processor and web server. With its IP address, users can usestandard PC IE browser to visit IP camera, real time monitor targets, manage and storevideo or image, PTZ control also is available through network.As a new member in camera family, IP camera shares the same operation functionwith the analog camera, such as, auto white balance, auto shutter speed, AGC, autobacklight compensation etc. On the other hand, IP camera supports remote accessthrough internet, and support multi-user visit, some IP cameras are able to extend toboth analog and digital signal.The core of F series IP cameras is 32Bit RSIC, adopts standard MJPEGcompression format, camera sensor is CMOS, support auto white balance andbacklight balance, support IE, cell phone browser，centralized monitor interfacemanagement. In general, according to the function of audio simplex & duplex,infrared, wired, wireless, POE, PZT, local storage, it has hundreds of products, tomeet requirements of high, middle, low ranks of users .
IPCAM User Manual51.1.1.1.1.1.1.1. ProductProductProductProduct SpecificationsSpecificationsSpecificationsSpecifications*- Adopt high Performance, strong function media processor 32Bit RSIC*- High sensor CMOS*-Adopt optimized MJPEG video compression algorithm, realize high-definition imagestransmission in narrow bandwidth;*-Maximum support 15 users viewing at the same time, no limit for users if usingForwarderServer function;*- Built in Web Server ，it is convenient for users to use standard browse to realize thereal time monitoring and setting administration;*-Support WIFI ：802 ．11b/g wireless networking;*-Support remote system update;*-Support DDNS analysis, support LAN & Internet (ADSL 、Cable Modem)*-Support variety of network protocol: TCP/IP, UDP, SMTP, PPPoE, Dynamic DNS,DNS Client, SNTP, BOOTP, DHCP, FTP, SNMP, WIFI/802. 11b/g*-Parts of modes products support one/ two way audio talkback;*-Support Motion Detection alarm function (set area & sensitivity);*-Support image snap*-Abnormal automatic recovery function，if Network Interruption can auto connection*-Dynamic alarm function, set alarm period .1.2.1.2.1.2.1.2. ApplicationsApplicationsApplicationsApplicationsThe series products usually are ideal for big department, supermarket, home,factory, workshop etc.1.3.1.3.1.3.1.3. SystemSystemSystemSystem RequirementsRequirementsRequirementsRequirementsMinimum Hardware Configuration
IPCAM User Manual6CPU: Pentium 1.6 GHzMemory: 256MBAudio card: need audio monitor, two way talkback essentialHard Disk : if it need video image ，no less favorable than 40GOperation System: 32 bit simple/ English Windows2000 、WindowsXP 、Windows2003 、Windows Vista & 64 bit simple Chinese/English Windows2003 、Windows XP、Windows Vista etc.Software environmentIE 5.0 or above versionDirectX8.0 or above versionTCP ／IP network protocol2. Interface & InstallationThere are two kinds of AJ series IP camera interfaces: one is body guard interface,the other is the extend line interface, set two representative products as examples, togive explanation:* Non-extended line IP Camera icon * Extended line IP Camera icon
IPCAM User Manual72.1. Interface* Non-extended line IP Camera TailgatePower Supply Light: constant on after power upNetwork light: constant sparkle after power up data transmission.Ethernet interface: RJ-45 interface.I/O interface: 1 router alarm input, accept 3, 4 two terminals (input terminal grounding,low level effective trigger); 1 router TTL control input, connect 1,2 twoterminals (1,2 terminals short connections).Power input interface: connect direct current 5V Power* Extension line interface definition icon:
IPCAM User Manual8Power: direct current 12V.GPIO alarm interface: accept external connection linkage alarm equipment (forexample: door magnet, infrared)Reset line: two reset line short circuit, equipments restore to ex- factory standards.Ethernet interface: RJ-45 network interface.Backup: follow-up product extend interface.About GPIO alarm interface (S terminal) definition:1# +DC12V2# RS485 （A）3# Earth （GND ）4# IO2 （OUT PUT ）5# RS485（B）6# IO1 （IN PUT ）GND: Ground ，alarm input ground ，RS485 groundRS485: RS485 control interface ，leftconnection RS485 negative right connection RS485 positive. connect P/T decoder，support variety P/T protocol.2.2. InstallationIP camera process image transmission on network through the use of InternetTechnology, it offers DDNS function for static IP, dynamic IP, PPPoE dialing users.IP Camera can connect to outer net through LAN, also connect directly.3 networkingconnecting ways are widely applied in IP Camera:2.2.1. Installation in LAN.This is the most popular network access way, as long as there is a router, internetcable connect router directly to IP Camera, IP Camera can connect to Internet asnormal PC, as shows:
IPCAM User Manual92.2.2. PPP o E InstallationUnder the condition, users need set PPPoE dialing parameter on IP Camera:input the username and password ISP supplier ’ offer permit IP Camera dialingconnects to Internet. As to set the PPPoE dialing parameter, you can connect device tonetwork through the first way, then write parameter to the device, also throughfollowing third way, direct process parameter written to device. The way how to setPPPoE, please refer to 3.4.5.for detailed steps2.2.3. IP Camera & PC connectionThis method is not used too often, when you process machine write parameter orprogram shift, we recommend you adopt the first connect network way, to process themodification of machine parameter.connect to IP camera (note: don ’ t apply for wrong power), after one minute
IPCAM User Manual10modification of IP camera, video could be connected by internet cable to IP camera;under the normal condition, yellow light is on, green light flickers, now physicalconnection of IP camera finish at this time (in order to connect successfully, weadvise to set camera IP as the stable IP at the same net range of PC in LAN , how toset, please refer to 8 frequent questions answer).3. IEIEIEIE BrowseBrowseBrowseBrowse totototo IPIPIPIP CameraCameraCameraCameraAfter IP camera connects to PC LAN through router, you can operate on IPcamera via PC, first please run the relative software in the CD kit3.1.3.1.3.1.3.1. UseUseUseUse IPIPIPIP FinderFinderFinderFinder SoftwareSoftwareSoftwareSoftwareOpen the disk, double click icon (the IP Finder software),and appear the following interface:Click NextNextNextNext , complete the installation
IPCAM User Manual11NoteNoteNoteNote : Before using the product installation, please just use IPCAM standardpower adapter. The use of non-certified power adapter may damage the IPCAM.IPCAM should only be installed in the indoor environmentAfter you finished install the IP Finder software, You will finder thaticon in your computer program. double click icon. The IP Finder isrun.Figure3.1If the internet cable power connect is correct, after click button itappears device styles, name, and IP address in the list, (if it doesn ’ t appear, pleaseconfirm power & internet cable work normally).Figure3.2
IPCAM User Manual12Figure3.3NoteNoteNoteNote : After click search button the software will automatically search for all thedevices ’ IP address within a local area network. .There are three cases:1111IP cameras ’ IP address not found. After click search button devices ’ IP addressdid not showing in the software ’ s list: e.g . Figure3.12222IP camera ’ s IP address being found, but the IP Camera ’ s network segment notas same as the local IP address ’ . In that way,first you should change the IPCamera ’ s network segment as same as the local IP address ’ . You can changethis following 3.1.13.1.13.1.13.1.1 ConfigureConfigureConfigureConfigure NetworkNetworkNetworkNetwork ParameterParameterParameterParameter e.g. Figure3.4 (e.g. Thelocal computer ’ s IP address is :192.168.0.15.But the device ’ s IP address is:192.168.1.99.You need change the device ’ s IP address:192.168.1.99to:192.168.0.99)3333IP cameras ’ IP address being found. A nd the device ’ s network segment assame as the local IP address ’ . A nd all devices are listed in software ’ s list:Note:1. If it needs manual modify camera name, HTTP interface, IP address, sub-net mask,gateway, main DNS server, backup DNS server, etc. please click apply aftermodification, enter IP camera username and password, click confirm is OK.2 . Inner visit address is LAN visit address; outer visit address is WAN visit address.3.1.13.1.13.1.13.1.1 ConfigureConfigureConfigureConfigure NetworkNetworkNetworkNetwork ParameterParameterParameterParameterFirst select the device ’ s IP address. right-click to open the network configuration dialogbox, then you can configure the devices ’ network parameters O n this page.
IPCAM User Manual13Figure3.4NOTE:NOTE:NOTE:NOTE:IPIPIPIP AddressAddressAddressAddress ::::Fill in IP address, ensure that the IP address ’ network segment youhave filled as same as the PC network segment.MaskMaskMaskMask ::::Use the default subnet mask e.g. : 255.255.255.0GatewayGatewayGatewayGateway ::::Ensure that the device ’ s network gateway as same as your PC ’ s.DNS:DNS:DNS:DNS: DNS service provider ’ s IP address .PortPortPortPort ::::Device provides HTTP services, port, usually 80UserUserUserUser andandandand password:password:password:password: The default administrator account is admin password isblankUUUU sesesese DHCPDHCPDHCPDHCP Device uses Dynamic Host Configuration Protocol, if enabled deviceeach time you start will be from a DHCP server (typically a router or modem ) toobtain IP addresses , or require users to manually set the IP address of.Type the correct user name and password (user must have administratorprivileges) update system firmware with the Web UI firmware
IPCAM User Manual143.3.3.3. 2222 .... LoggingLoggingLoggingLogging andandandand ActiveActiveActiveActive XXXX installationinstallationinstallationinstallationBefore IE monitoring through web, it is necessary to install video plug-in, installationmode as below:Open disk, find that icon. double clic k the icon. processinstallation, Click the next step to until finish.There are two way to logging IP camera1) Double-click the device ’ IP address in the list of IP Finder . (Figure 3.2). IE willautomatically open and display the device ’ s login screen.2 ) Access directly through IE by directly input the device IP address in the IEbrowser ’ s address bar, For example: Figure3.6Figure3.6When the item connects to outer networking, a log-in interface will appear . For example:Figure3.7
IPCAM User Manual15Figure3.7enter log in information, click OK to enter, an installation pop-up will appear : e.g.Figure3.7Figure3.8Select the needed language, and the way you want to visit. Click Sign in. afterinstallation Active X you can use it. If it is blocked and requires plug-in installation byantivirus software, please remove block .
IPCAM User Manual16NoteNoteNoteNote ：1. Default device account is adminadminadminadmin ，no password.3.3.3.3. 3333 .... MainMainMainMain OperationOperationOperationOperation InterfaceInterfaceInterfaceInterfaceFigure3.9For example: If the is a bright , indicating the device is the first way to monitor thestatus .When you log on the operator interface, you can perform PTZ and video parametersDirectionDirectionDirectionDirection control:control:control:control: Click the arrows in different directions can be the lens to theappropriate direction of rotationVertical cruise Level cruise1. Image mirror indicates a reverse image.2. Resolution, mode, brightness, contrast default setting are ：320*240 、50HZ 、6、4、mode is mainly for the adjustment of Light strength, please adjust to 60HZwhen light is poor or in dark.3. There are 3 browse modes in IE mode: visitor, operator, administrator, theauthority
IPCAM User Manual17of administrator is the highest, log in different authorities, the operation will bedifferent. Regarding to 3 user authorities, please refer to 3.4.4. Equipment UserAdministration .If you want to see 4-way,or 9-way ，you can click the icon orOSDOSDOSDOSD : In the video display date and time. You can disable the OSD function or choose thecolor of OSD.SnapshotSnapshotSnapshotSnapshot Photo:Photo:Photo:Photo: Click the icon interception photo.Video:Video:Video:Video: Click icon to enter the recording mode, the icon becomes ，again, clickthe end of the recording.3.3.3.3. 4444 .... ManagerManagerManagerManager OperationOperationOperationOperationWhen you logged on as Administrator, click on “ Administrator action ” to entersetting interface. Device Information: You can see the device serial number,equipment systems and device firmware version of the application firmwareversion of the.AliasAliasAliasAlias settingsettingsettingsetting ::::You can set your favorite device aliases.Date&TimeDate&TimeDate&TimeDate&Time setsetsetset ::::seting the date and time.UerUerUerUer settingssettingssettingssettings ::::Can be set up to 8 users. On this page you can set up accounts ofthe user name, password, as well as in their packet (administrator, operator,visitor).�VVVV isitorisitorisitorisitor ::::In this mode, you can only visit.�OOOO peratorperatorperatorperator ::::You can set the direction of the lens device, set the video screen ’ sbrightness, contrast and other parameter .�AAAA dministratordministratordministratordministrator ::::You can set the device advanced configuration.UPnPUPnPUPnPUPnP setsetsetset ::::If you want internet access IPCAM, to ensure that the state issuccessful UPnP.DeviceDeviceDeviceDevice FirmwareFirmwareFirmwareFirmware Upgrade:Upgrade:Upgrade:Upgrade: The system firmware update the device firmwareand application ofRestoreRestoreRestoreRestore factoryfactoryfactoryfactory settingssettingssettingssettings ::::When there is not a response when the erroroccurred, you can restore the factory settings to resolve the device.IIII rebootedrebootedrebootedrebooted thethethethe devicedevicedevicedevice ::::I rebooted the device.Back:Back:Back:Back: Return to monitor mode3.4.13.4.13.4.13.4.1 Multi-DeviceMulti-DeviceMulti-DeviceMulti-Device SettingsSettingsSettingsSettings�Add a local area network equipment
IPCAM User Manual18I n the multi-device configuration page, you can see all the equipment insidethe LAN. The first device is the default device. You can add more devices listedin the list of equipment. Embedded applications, up to 4 devices at the sametime-line. Click the “ second road equipment ” and double-click “ Current list ofdevices in the LAN ” in the device entry name, host address, Http port willautomatically be filled, require the user to fill in the correct account name andpassword, click “ Add . ” Repeat this process you can continue to add devices.Finally do not forget to click on the “ Settings ” button.Figure3.10����AddAddAddAdd aaaa devicedevicedevicedevice onononon thethethethe internetinternetinternetinternetF irst, make sure you want to add devices to access via IP address or domainname. For example:http://202.96.133.134: 9008 or http://IPcam.dyndns.org:9008 .And then fill in host address: 202.96.133.134 HttpPortHttpPortHttpPortHttpPort : 9008 or host address:IPcam.dyndns.org HttpHttpHttpHttp portportportport : 9008. and fill in the correct account name andpassword to the last click on “ Add. ” Repeat the above steps can add otherdevices
IPCAM User Manual19Figure3.113.4.23.4.23.4.23.4.2 BasicBasicBasicBasic NetworkNetworkNetworkNetwork SettingsSettingsSettingsSettingsFigure3.12This sector is for DHCP and IP configuration，port forwarding is needed, If youchoose to set IP address，please fill in the relative IP address、subnet mask,gateway,DNS server, Http port;
IPCAM User Manual203.4.33.4.33.4.33.4.3 WirelessWirelessWirelessWireless SettingSettingSettingSettingFirst make sure that your wireless router is working well. Then click thebutton. After you click twice. The camera will find out the Wireless LANautomatically . Then select the Wireless LAN you wanted. Then the WirelessLAN ’ s information will showing. Finally input the Wireless password and submit.Figure3.133.5.43.5.43.5.43.5.4 ADSLADSLADSLADSL SettingSettingSettingSettingW hen your device directly connected to the Internet via ADSL, when youneed to enter fill in your ISP service providers obtain from the account name andpassword. Duly completed and click “ Settings ” button. Your device can connectto the internet has.Figure3.14
IPCAM User Manual21DynamicDynamicDynamicDynamic DNSDNSDNSDNS Setting(DDNS)Setting(DDNS)Setting(DDNS)Setting(DDNS)Figure3.15All the above information is set up when the device is ready to deliver; usersgenerally do not need to change. In case of any accidental loss, user needs to re-obtainthe domain name, and fill it himself, juts do as the above, the user ’ s name is just thefirst four characters, and this is for remote access. For example, http://abcd. 88safe.comthe user ’ s name is abcd. The password is DDNS. (The password can be obtained onthe device body or contact the supplier). When connected, it displays "xxxxx is OK"on Device Info ; it means that it was successfully set. If you need to use your ownDynamic DNS, please select the appropriate service providers (on DDNS service)then enter the following information, then save it;.3.5.63.5.63.5.63.5.6 E-mailE-mailE-mailE-mail andandandand FTPFTPFTPFTP serviceserviceserviceservice SettingsSettingsSettingsSettingsFigure3.16
IPCAM User Manual22The above setting is a preparation for the alarm function, the sender should beentered the sender ’ s email address ，recipient 1 、2、3、4 is filled with recipient E-mailaddress ；SMTP server should be filled with the sender email SMTP server ，e.g. thesender email address is abc@163.com ，and enter mail.163.com. Generally SMTP portis 25，do no need to change；when needs to check, just tick it, and enter SMTP userand SMTP password，both of them are provided by Email provider，and test accordingto reference ；when needs to send, please tick Email notification Internet IP address ；The e-mail server and other information can be obtained from the mail serviceprovider the email notification is image captured when alarming if no emailnotification is needed when alarming, and then no need to enter .Set up FTP service, you can fill in parameters like following:Figure3.17The above setting is equally similar to Mail Server Settings ，when alarming istriggered it also sends image，please enter FTP server、FTP port、FTP user、FTPpassword ,FTP upload directory 、FTP mode ，FTP mode has two options: PORT andPOSV . If needs a quick upload image, then select it, edit upload image interval（second ）3.5.73.5.73.5.73.5.7 AlarmAlarmAlarmAlarm ServiceServiceServiceService SettingsSettingsSettingsSettingsAs shown below, there are two modes of alarm trigger, first one is motion detection,pleas refer to below interface ，the sensitivity of motion detection can be adjustedaccording to the users ′requirement, the higher the number is, the lower sensitivityis; Another mode is input alarm, when connected, it triggers alarm through alarminput signal which connects to linkage alarm GPIO;When triggered, there are 3 alarm modes：one is IO alarm linkage, camera connectswith linkage alarm box through GPIO, sound the siren ；the second is emailnotification, send email with images captured ；the last is upload pictures alarm ，as theway mentioned before FTP upload pictures alarm, Upload pictures interval （second ）
IPCAM User Manual23keeps consiste nt with the mentioned upload pictures interval of Ftp service settings.The schedule refers to arming time ，as the selected time interval ：0：00 minute perweek to 0 ：45 minutes and Monday 1 ：00 hour and 2 ：00 hourFigure3.18Reset/FirmReset/FirmReset/FirmReset/Firm WareWareWareWare UpgradeUpgradeUpgradeUpgradeThis sector is for camera firmware upgrade, it includes device system firmwareand device application firmware .Be cautious to apply for it!Figure3.19RestoreRestoreRestoreRestore FactoryFactoryFactoryFactory SettingsSettingsSettingsSettingsWhen users forget password, we can restore ex-factory settings, when click,a picture will pop up, Click ok, and wait for 1 minute and you can use it normally.User setting feature restores
IPCAM User Manual24RebootRebootRebootReboot EquipmentEquipmentEquipmentEquipmentClick restart, it appears the above picture, click ok, wait for 1 minute and youcan use it normally4.4.4.4. OthersOthersOthersOthers4.14.14.14.1 PortPortPortPort ForwardingForwardingForwardingForwarding SettingsSettingsSettingsSettings inininin routerrouterrouterrouterWhen a remote access via internet visit, port forwarding in router is a must, differentbrands routes have different name, but the operation is the same.Take the TP-LINK TD-8840 router port mapping setting as example. To set up IPCamera as an example: router inner web IP is 192.168.1.1, IP camera inner web
IPCAM User Manual25address is 192.168.1.50, and port is 80.1. First log in router web administration interface.2. Click in front of left side “ Advanced Setup3. Click “ virtual server ” in the unfolded menu.4. fill “ 80 ” under the right portportportport startstartstartstart or portportportport endendendend ,ServerServerServerServer IPIPIPIP addressaddressaddressaddress fill"192.168.1.50", protocol select "TCP/UDP"OR ” “TCP ”, finally don ’ t forget clickunder “ "save/apply ”1. DLINK ex-factory definition router address is 192.168.0.12. Linksys ex-factory definition router address is 192.168.1.13. 3com ex-factory definition router address is 192.168.2.14. Microsoft ex-factory definition router address is 192.168.2.15. Net gear ex-factory definition router address is 192.168.1.16. Asus ex-factory definition router address is 192.168.1.14.24.24.24.2 WarrantyWarrantyWarrantyWarrantyUnder normal use condition, products resulting from its own failures in the
IPCAM User Manual26warranty period will be free maintenance . Warranty Terms as following:a) Charge-free maintenance of the product is one year .We can repair it for freeduring the guarantee period (Damages not caused by misuse or vandalism).Repair over guarantee period, we will charge maintenance fee.b) During guarantee period, breakdown caused by misuse or other reasons out ofrange of warranty. You could ask repair depend on the card. We only charge forchanged components, the maintenance charge is free.c) When the products need maintenance, hand up the card with products to themanufacture or local distributor.d) Take apart item crust, tear up the sealing label privately, this is out ofwarranty range.e) We do not accept the damaged item due to modification or add otherfunctions.The Following Circumstances will not be free warrantya) Period check, maintenance or change components due to normal attrition.b) The damages due to crash, extrusion, artificial flooding, moisture or otherpersonal reasons.c) The damages due to floods, fire, lightning strike and other natural calamitiesor force majeure incidents factorsd) Repaired item by non-authorized repair centers.All above terms, if changed, regarded to relevant regulations. FCC STATEMENT1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference.(2) This device must accept any interference received, including interference that may cause undesired operation.2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.Consult the dealer or an experienced radio/TV technician for help.FCC Radiation Exposure StatementThis equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body

Navigation menu