Zowee Technology M234AA Wi-Fi HD Doorbell Camera User Manual

SHENZHEN ZOWEE TECHNOLOGY CO.,LTD Wi-Fi HD Doorbell Camera

User Manual

VIDEO DoorbellQuick Install GuideLED StatusLED Stays Red: Waiting for Wi-Fi setup or Wi-Fi setup failedLED blinks Red slowly: Start to configure networkLED blinks Blue: Start to connect to networkLED Stays Blue: Wi-Fi setup successfully or Ring Button pushed by a guestFRONT Mounting Bracket Battery Charging, before setup and installation Charge your device using a USB-compatible charger, to ensure your device is fully charged. Charge the device prior to Wi-Fi setup and installation.Wi-Fi SetupBefore hardware installation, connecting the device to your home Wi-Fi network (The device Support 2.4GHz Wi-Fi currently). And please ensure that your mobile phone is connected to your home Wi-Fi network before setup.1. Download and install the Video Doorbell app from Appstore or Google play by searching ‘Danale’2. Launch the ‘Danale’ app and log in with your Danale+ account. If it’s the first time of using Danale+, please sign up and create your own account.3. Power on the device by a USB-Compliance charger,and press the Reset button on the back of the device to start connecting.4. Click on Add Device on the app, then search the device or scan QR Code to finish Wi-Fi setup.Hardware Installation1. Remove your current doorbell button and power off your transformer (for wired installation only)2. Install the mounting bracket using the providedscrewdriver bit, handle and drill bit3. Connect your doorbell wiring to the terminal screwslocated on the mounting bracket (For wired installation only)4. Place the device on the mounting bracket5. Tighten the security screws at the bottom of the deviceusing the proprietary screwdriver bit. Please do not over-tighten the security screws.6. Provide power back to your transformer (For wiredinstallation only) Additional Installation for electronic chimeIf your chime is electronic, you may need to install a diode, which is commonly found inside your current doorbell button, or check with your doorbell manufacturer.Connect the diode to the terminals with the arrow on the diode facing towards the doorbell inside chime as show below HD CameraMicrophonePush ButtonLEDSpeakerBACKDoorbell Wire TerminalsSetup ButtonMirco USB Charging PortSecurity HooksMounting HooksScrew Hole123546789ACINRearTransformerFrontP1-With Doorbell Chime(VAC)ConnectorConnectorSecondary Power=10-36 VAC 10VAWired,MechanicalDoorbell ChimeLow Voltage TransfomerPrimary PowerUS=120/130 VACUK&EU=220/230/240 VAC1X1X1X1X1X4X4X2X2XWhat’s in the boxMounting InstallationMounting Bracketslip into the hooks120*80-105g哑粉纸-彩色印刷-风琴折DB3518E-234AA-ZW 234AA120*80-105gFCC Caution:Any Changes or modifications not expressly approved by the party responsiblefor compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Navigation menu