ZTE TRUNKING TECHNOLOGY PH7X0LU1 DIGITAL PORTABLE RADIO User Manual
ZTE TRUNKING TECHNOLOGY CORPORATION DIGITAL PORTABLE RADIO
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3666454 |
| Application ID | x/ZcrL1kp8i+NCIzUxfz5Q== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 114.44kB (1430554 bits) |
| Date Submitted | 2017-12-07 00:00:00 |
| Date Available | 2017-12-07 00:00:00 |
| Creation Date | 2016-08-05 16:36:41 |
| Producing Software | Soda PDF 5 |
| Document Lastmod | 2017-12-06 18:59:11 |
| Document Title | User Manual |
| Document Creator | Soda PDF 5 |
LEGAL INFORMATION Get to Know Your PH790L U(1) Status Indication No. Name Side key 1 13 * key PTT key 14 Top key Side key 2 15 Antenna LED indicator 16 Accessory interface LCD icons Group call selection knob 17 Up key The following icons may be displayed on the LCD. Power/Volume knob 18 Back/Group call management key Microphone 19 Hook key Violators Will Be Prosecuted. LCD 20 Down key ZTE Trunking Technology Corporation reserves the right to make modifications on typographical errors or update specifications in this guide without prior notice. OK/Menu key 21 # key 10 Call/Answer key 22 Push button 11 Speaker 23 Battery 12 Digit keypad Copyright©ZTE Trunking Technology Corporation 2015 No part of this publication may be quoted, reproduced, translated or used in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE Trunking Technology Corporation. PH790L U(1) No. Name Components The figures in this manual are for reference only. For the product structure and specifications of the battery and charger, refer to the actual product. The accessories provided with the product may vary with product models and functions. Digital Handheld Terminal No signal Signal strength The more the signal bars are, the stronger the signals are. SMS message unread Message The message box is full. Your PH790L U(1) is in Hunt status. This icon is not displayed in BKG Hunt To facilitate operations, your PH790L U(1) provides three programmable keys (Side key 1, Side key 2, and the Top key), and each programmable key can be assigned with one of the following functions by the product distributor through programming. Roaming Your PH790L U(1) is in roaming status. The current channel transmits signals in low power. Transmit power The current channel transmits signals in high power. Description Call release Releases an ongoing call or stops establishing a call. Battery level The longer the battery progress bar is, the higher the battery level is. Keypad lock Locks or unlocks the keypad immediately. Speaker The speaker is on. Power level Adjusts the transmit power level quickly. Private call contact Opens the private call contact list directly. Group call contact Opens the contact list of a contact group directly. Call logs Opens the Call Logs menu directly. Work mode Opens the Work Mode menu directly. Indicator PH790L U(1) LED indicator The LED indicator indicates the operating status of the PH790L U (1). Hunt Opens the Hunt menu directly. Lit green Your PH790L U(1) is receiving voice signals. Manual Hunt Restarts scanning and registration Lit red Your PH790L U(1) is transmitting voice signals. Enables or disables BKG Hunt. Flashing orange Your PH790L U(1) is in Hunt status. Lit orange After a call is established, there is no voice transmitted or received in the service channel. You can press the PTT key to initiate a call. BKG Hunt NOTE: Status Hunt 10 Icon Programmable Keys No. Function Quick Start Guide Name The functions of a programmable key may vary with the operation (press or press and hold). For details, contact the local distributor. Select a Group Contact Basic Operations After your PH790L U(1) is po wered on and registered, you can select a group contact through one of the following three ways: • Power On/off Your PH790L U(1) • To power off your PH790L U(1), tu rn the Power/Volume knob counterclockwise until a click is heard. Menu After powering on your PH790L U(1), tu rn the clockwise can turn up the volume, and turning the Power/ Volume knob counterclockwise can turn down the volume. • Select a Group You can add contacts in one group to manage the contacts efficiently. Your PH790L U(1)suppo rts up to 32 groups. One group contains up to 32 contacts. Menu Press the OK/Menu key, select Subgroup from the displayed menu, press the Up or Down key to select a group as required. After entering the group, select Set Default, and press the OK/ Menu key. Initiate a private call Press the OK+* key combination. The keypad can be locked or unlocked. • Shortcut key When the home screen is displayed, press the Group call management key to open the Subgroup menu, and then repeat the above operations. NOTE: By default, your PH790L U(1)has one g roup list in which you can add 32 group contacts. Key combination Programmable key If your distributor sets a Keypad Lock shortcut key, you can press the shortcut key to lock or unlock the keypad. • Menu After you select a time option, if you perform no operation within the specified period, the keypad is locked automatically. End a group call Press the Hook key to end the group call. End a private call NOTE: Only the calling party can end a group call. To end a private call, press the Hook key. Initiate the call through Contacts or Call Logs Manufacturer Address Group Call ZTE TRUNKING TECHNOLOGY CORPORATION Initiate a group call ４／Ｆ， R&D Building 1, ZTE Industrial Park, ＬｉｕＸｉａｎ Ｒｏａｄ，Xili, Nanshan District, Shenzhen, P. R. China You can initiate a group call through one of the following ways: • 2. Select Contacts > Private Contact, or select Call Logs to display Outgoing calls, Incoming calls, or Missed calls. Initiate a group call to a preset group contact When the home screen is displayed, press the PTT key to initiate a group call to the group contact preset for the Group call selection knob. 3. Press the Up or Down key to select the contact that you want to call. • 4. Press the PTT key to initiate the private call. Through the address book in groups 1. On the home screen, press the OK/Menu key and select Subgroup, or press the Group call management key to enter the Subgroup menu. Dial the number that you want to call 1. When the home screen is displayed, enter the private number that you want to call. • icon is A private call can be ended by the calling or called party. 2. Press the Call/Answer key, PPT key, or the # key to initiate the call. Enter the main menu, select Setting > Radio Setting > Keypad Lock, and select Disable or a time option. After receiving a private call, your PH790L U(1) plays a p rompt After a group call is established, a member who did not answer tone. If you press the Call/Answer key or PTT key within the the call immediately can join in the group call during the call. preconfigured duration, the call is answered. Your PH790L U(1) emits NOTE: 1. Press the OK/Menu key to enter the home menu. • The PH790L U(1) answers a group call automatically. When a group call is answered, your PH790L U(1) emits an announcement. Answer a call in delay displayed on the LCD to notify you that you missed a call. You can initiate a private call through one of the following ways. Your PH790L U(1) plays a p rompt tone before the called party answers the call. • Answer a private call an announcement. If the call is not answered, the To ensure that the called party can hear you the best, keep the microphone 2.5 cm to 5 cm away from your mouth. If the distributor sets a Group call contact shortcut key, you can press this key to enter the group call list menu corresponding to the group, and then press the Up or Down key to select a group call contact. Lock/Unlock the Keypad • Call Private Call If the keypad is unnecessary temporarily, you can lock the keypad to prevent misoperations. You can lock or unlock the keypad through one of the following ways: You can select a group through one of the following ways: If your PH790L U(1)is notregistered or fails in registration, no call can be initiated. NOTE: Shortcut key Answer a group call NOTE: If there is no Keypad Lock in the Radio Setting menu, you can ask your distributor to set the automatic keypad lock function. Press the OK/Menu key, select Subgroup from the menu, and press the Up or Down key to select a group as required. After entering a group, select Members to enter the Members menu, and press the Up or Down key to select a group call contact. Turn Up/down the Volume • Group call selection knob Turn the Group call selection knob to select the group contact. To power on your PH790L U(1), tu rn the Power/Volume knob clockwise until a click is heard. • If you select Disable, the keypad will not be locked automatically. You can press the key combination or the Keypad Lock shortcut key to lock or unlock the keypad. Initiate a call in Missed calls 2. Select Members, and press the Up or Down key to select the contact that you want to call. 3. Press the Call/Answer key or PTT key to initiate the group call. • In the Missed calls menu, select a missed call, and press the Call key or PTT key to initiate the call. Dial the number that you want to call 1. On the home screen, enter the group call number that you want to call. 2. Press the Call/Answer key, PTT key, or # key to initiate the group call. FCC Caution: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning Warning The device is designed and tested to comply with a number of national and international standards and guidelines (listed below) for human exposure to radio frequency electromagnetic energy. This radio complies with the IEEE and ICNIRP exposure limits for When worn on the body, always place the radio in ZTE approved clip, holder, holster, case, occupational/controlled RF exposure environment at operating duty factors of up to 50% or body harness for this product. Using approved body-worn accessories is important transmitting and is authorized by the FCC for occupational use only. In terms of measuring because the use of other manufacturer’s non-approved accessories may result in exposure RF energy for compliance with the FCC exposure guidelines, your radio radiates measurable levels, which exceed the FCC’s occupational/controlled environment RF exposure limits. RF energy only while it is transmitting (during talking), not when it is receiving (listening) or in standby mode. The device complies with the following RF energy exposure standards and guidelines: • United States Federal Communications Commission, Code of Federal Regulations; 47 Hold the radio in a vertical position in front of face with the microphone (and the other parts of CFR §§ 1.1307, 1.1310, 2.1091 and 2.1093 the radio, including the antenna) at least one inch (2.5 cm) away from the nose. Keeping the • American National Standards Institute (ANSI) / Institute of Electrical and Electronic radio at the proper distance is important because RF exposures decrease with distance from Engineers (IEEE) C95. 1-1992 the antenna. Antenna should be kept away from eyes. • Institute of Electrical and Electronic Engineers (IEEE) C95.1-1999 Edition
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Create Date : 2016:08:05 16:36:41+08:00 Creator : Soda PDF 5 Modify Date : 2017:12:06 18:59:11-08:00 Has XFA : No Tagged PDF : No XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Metadata Date : 2017:12:06 18:59:11-08:00 Creator Tool : Soda PDF 5 Thumbnail Width : 256 Thumbnail Height : 92 Thumbnail Format : JPEG Thumbnail Image : (Binary data 12940 bytes, use -b option to extract) Instance ID : uuid:f89a82ce-f09e-4c1e-ac00-3dc7ddefa3d7 Original Document ID : xmp.did:CB07BD5B2E55E611ADEED8FC5B9E7496 Document ID : xmp.id:B804A012E75AE611847DBF2E8F407693 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:B704A012E75AE611847DBF2E8F407693 Derived From Document ID : xmp.did:FB149CE85F55E611ADEED8FC5B9E7496 Derived From Original Document ID: xmp.did:CB07BD5B2E55E611ADEED8FC5B9E7496 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CS6 (Windows) History Changed : / History When : 2016:08:05 16:36:41+08:00 Format : application/pdf Producer : Soda PDF 5 Trapped : False N Pages : 1 Has Visible Transparency : False Has Visible Overprint : True Max Page Size W : 475.001153 Max Page Size H : 177.999988 Max Page Size Unit : Millimeters Font Name : MicrosoftYaHei, MicrosoftYaHei-Bold Font Family : 微软雅黑, 微软雅黑 Font Face : Regular, Bold Font Type : Open Type, Open Type Font Version : Version 6.02, Version 6.02 Font Composite : False, False Font File Name : msyh.ttf, msyhbd.ttf Plate Names : Cyan, Black Swatch Group Name : 默认色板组 Swatch Group Type : 0 Page Count : 4 For : ֹ10072725, Title : PH790 U(1)User manual.pdf Bounding Box : 11 14 1347 491 Container Version : 11 Creator Version : 16 Image Height : 477 Image Width : 1336 Image Size : 1336x477 Megapixels : 0.637EXIF Metadata provided by EXIF.tools