ZTE TRUNKING TECHNOLOGY PH7X0U1 DIGITAL PORTABLE RADIO User Manual

ZTE TRUNKING TECHNOLOGY CORPORATION DIGITAL PORTABLE RADIO Users Manual

Contents

Users Manual

PH790 U(1)
Quick Start Guide
Digital Handheld Terminal
LEGAL INFORMATION
Copyright©ZTE Trunking Technology Corporation 2015
No part of this publication may be quoted, reproduced,
translated or used in any form or by any means, electronic or
mechanical, including photocopying and microfilm, without
the prior written permission of ZTE Trunking Technology
Corporation.
Violators Will Be Prosecuted.
ZTE Trunking Technology Corporation reserves the right
to make modifications on typographical errors or update
specifications in this guide without prior notice.
The figures in this manual are for reference only. For the
product structure and specifications of the battery and charger,
refer to the actual product. The accessories provided with the
product may vary with product models and functions.
1
Get to Know Your PH790 U(1)
Components
No. Name No. Name
1 Side key 1 13 * key
2 PTT key 14 Top key
3 Side key 2 15 Antenna
4 LED indicator 16 Accessory interface
5Group call selection knob 17 Up key
6 Power/Volume knob 18 Back/Group call management
key
7 Microphone 19 Hook key
8LCD 20 Down key
9 OK/Menu key 21 # key
10 Call/Answer key 22 Push button
11 Speaker 23 Battery
12 Digit keypad
Programmable Keys
To facilitate operations, your PH790 U(1) provides three
programmable keys (Side key 1, Side key 2, and the To p key),
and each programmable key can be assigned with one of
the following functions by the product distributor through
programming.
No. Function Description
1 Call release Releases an ongoing call or stops
establishing a call.
2 Keypad lock Locks or unlocks the keypad immediately.
3 Power level Adjusts the transmit power level quickly.
4 Private call contact Opens the private call contact list directly.
5 Group call contact Opens the contact list of a contact group
directly.
6 Call logs Opens the Call Logs menu directly.
7 Work mode Opens the Work Mode menu directly.
8 Hunt Opens the Hunt menu directly.
9 Manual Hunt Restarts scanning and registration
10 BKG Hunt Enables or disables BKG Hunt.
NOTE:
The functions of a programmable key may vary with the
operation (press or press and hold). For details, contact the
local distributor.
Status Indication
LCD icons
The following icons may be displayed on the LCD.
Name Icon Status
Signal strength
No signal
The more the signal bars are, the
stronger the signals are.
Message
SMS message unread
The message box is full.
Hunt Your PH790 U(1) is in Hunt status. This icon
is not displayed in BKG Hunt.
Roaming Your PH790 U(1) is in roaming status.
Transmit
power
The current channel transmits signals in
low power.
The current channel transmits signals in
high power.
Battery level
The longer the battery progress bar is,
the higher the battery level is.
Speaker The speaker is on.
LED indicator
The LED indicator indicates the operating status of the PH790 (1).
Indicator PH790 U(1)
Lit green Your PH790 U(1) is receiving voice signals.
Lit red Your PH790 U(1) is transmitting voice signals.
Flashing orange Your PH790 U(1) is in Hunt status.
Lit orange
After a call is established, there is no voice
transmitted or received in the service channel. You
can press the PTT key to initiate a call.
2 3 4
Basic Operations
Power On/off Your PH790 U(1)
To power on your PH790 U(1), turn the Power/Volume knob
clockwise until a click is heard.
To power off your PH790 U(1), turn the
Power/Volume knob
counterclockwise until a click is heard.
Turn Up/down the Volume
After powering on your PH790 U(1), turn the
clockwise can turn up the volume, and turning the Power/
Volume knob counterclockwise can turn down the volume.
Select a Group
You can add contacts in one group to manage the contacts
efficiently. Your PH790 U(1)supports up to 32 groups. One group
contains up to 32 contacts.
You can select a group through one of the following ways:
• Menu
Press the OK/Menu key, select Subgroup from the displayed
menu, press the Up or Down key to select a group as required.
After entering the group, select Set Default, and press the OK/
Menu key.
• Shortcut key
When the home screen is displayed, press the Group call
management key to open the Subgroup menu, and then
repeat the above operations.
NOTE:
By default, your PH790 U(1)has one group list in which you can
add 32 group contacts.
Select a Group Contact
After your PH790 U(1) is powered on and registered, you can select
a group contact through one of the following three ways:
• Group call selection knob
Turn the Group call selection knob to select the group
contact.
• Menu
Press the OK/Menu key, select Subgroup from the menu,
and press the Up or Down key to select a group as
required. After entering a group, select Members to enter
the Members menu, and press the Up or Down key to
select a group call contact.
• Shortcut key
If the distributor sets a Group call contact shortcut key,
you can press this key to enter the group call list menu
corresponding to the group, and then press the Up or
Down key to select a group call contact.
Lock/Unlock the Keypad
If the keypad is unnecessary temporarily, you can lock the
keypad to prevent misoperations. You can lock or unlock the
keypad through one of the following ways:
• Key combination
Press the OK+* key combination. The keypad can be locked
or unlocked.
• Programmable key
If your distributor sets a Keypad Lock shortcut key, you can
press the shortcut key to lock or unlock the keypad.
• Menu
Enter the main menu, select Setting > Radio Setting >
Keypad Lock, and select Disable or a time option.
After you select a time option, if you perform no
operation within the specified period, the keypad is locked
automatically.
If you select Disable, the keypad will not be locked
automatically. You can press the key combination or the
Keypad Lock shortcut key to lock or unlock the keypad.
NOTE:
If there is no Keypad Lock in the Radio Setting menu, you can
ask your distributor to set the automatic keypad lock function.
Call
To ensure that the called party can hear you the best, keep the
microphone 2.5 cm to 5 cm away from your mouth.
Private Call
Initiate a private call
You can initiate a private call through one of the following
ways. Your PH790 U(1) plays a prompt tone before the called party
answers the call.
• Initiate the call through Contacts or Call Logs
1. Press the OK/Menu key to enter the home menu.
2. Select Contacts > Private Contact, or select Call Logs to
display Outgoing calls, Incoming calls, or Missed calls.
3. Press the Up or Down key to select the contact that you
want to call.
4. Press the PTT key to initiate the private call.
• Dial the number that you want to call
1. When the home screen is displayed, enter the private
number that you want to call.
2. Press the Call/Answer key, PPT key, or the # key to initiate
the call.
• Initiate a call in Missed calls
In the Missed calls menu, select a missed call, and press
the Call key or PTT key to initiate the call.
NOTE:
If your PH790 U(1)is not registered or fails in registration, no call
can be initiated.
Answer a private call
After receiving a private call, your PH790 U(1) plays a prompt
tone. If you press the Call/Answer key or PTT key within the
preconfigured duration, the call is answered. Your PH790 U(1) emits
an announcement. If the call is not answered, the icon is
displayed on the LCD to notify you that you missed a call.
End a private call
To end a private call, press the Hook key.
NOTE:
A private call can be ended by the calling or called party.
Group Call
Initiate a group call
You can initiate a group call through one of the following ways:
• Initiate a group call to a preset group contact
When the home screen is displayed, press the PTT key to
initiate a group call to the group contact preset for the
Group call selection knob.
• Through the address book in groups
1. On the home screen, press the OK/Menu key and select
Subgroup, or press the Group call management key to
enter the Subgroup menu.
2. Select Members, and press the Up or Down key to select
the contact that you want to call.
3. Press the Call/Answer key or PTT key to initiate the group
call.
• Dial the number that you want to call
1. On the home screen, enter the group call number that you
want to call.
2. Press the Call/Answer key, PTT key, or # key to initiate the
group call.
Answer a group call
The PH790 U(1) answers a group call automatically. When a group
call is answered, your PH790 U(1) emits an announcement.
Answer a call in delay
After a group call is established, a member who did not answer
the call immediately can join in the group call during the call.
End a group call
Press the Hook key to end the group call.
NOTE:
Only the calling party can end a group call.
5 6 7 8 9
Compliance with RF Exposure Standards
Your ZTE TRUNKING TECHNOLOGY CORPORATION 2-way radio is designed and tested to comply with a number of national and internationall
standards and guidelines (listed below) for human exposure to radio frequency electromagnetic energy. This radio complies with the IEEE and
ICNIRP exposure limits for occupational/controlled RF exposure environment at operating duty factors of up to 50 % transmitting and is
authorized by the FCC for occupational use only. In terms of measuring RF energy for compliance with the FCC exposure guidelines, your radio
radiates measurable RF energy only while it is transmitting (during talking), not when it is receiving (listening) or in standby mode. Note: The
approved batteries supplied with this radio are rated for a 5-5-90 duty factor (5% talk-5% listen 90% standby), even though this radio complies
with the FCC occupational RF exposure limits and may operate at duty factors of up to 50 % talk.
Your ZTE TRUNKING TECHNOLOGY CORPORATION 2-way radio complies with the following RF energy exposure standards and guidelines:
• United States Federal Communications Commission, Code of Federal Regulations; 47 CFR §§ 1.1307, 1.1310, 2.1091 and 2.1093
• American National Standards Institute (ANSI) / Institute of Electrical and Electronic Engineers (IEEE) C95. 1-1992
• Institute of Electrical and Electronic Engineers (IEEE) C95.1-1999 Edition
Operating Instructions:
• Transmit no more than the rated duty factor of 50% of the time. To transmit (talk), push the Push-To-Talk (PTT) button. To receive calls, release
the PTT button. Transmitting 50% of the time, or less, is important because this radio generates measurable RF energy exposure only when
transmitting (in terms of measuring for standards compliance).
• Hold the radio in a vertical position in front of face with the microphone (and the other parts of the radio, including the antenna) at least one inch
(2.5 cm) away from the nose. Keeping the radio at the proper distance is important because RF exposures decrease with distance from the
antenna. Antenna should be kept away from eyes.
• When worn on the body, always place the radio in a ZTE TRUNKING TECHNOLOGY CORPORATION approved clip, holder, holster, case, or
body harness for this product. Using approved body-worn accessories is important because the use of ZTE TRUNKING TECHNOLOGY
CORPORATION_or other manufacturer’s non-approved accessories may result in exposure levels, which exceed the FCC’s
occupational/controlled environment RF exposure limits.
• If you are not using a body-worn accessory and are not using the radio in the intended use position in front of the face, then ensure the antenna
and the radio are kept at least 2.5 cm (one inch) from the body when transmitting. Keeping the radio at the proper distance is important because
RF exposures decrease with increasing distance from the antenna.
• Use only ZTE TRUNKING TECHNOLOGY CORPORATION approved supplied or replacement antennas, batteries, and accessories. Use of
non-manufacturer-name approved antennas, batteries, and accessories may exceed the FCC RF exposure guidelines.
Any c
'

Navigation menu