ZTE Manual AT T Wireless Home Phone WF720 Quick Start Guide English PDF 4.02MB

User Manual: ZTE Manual AT&T Wireless Phone WF720 | ZTE USA

Open the PDF directly: View PDF .
Page Count: 2

AT&T Wireless Home Phone Base

In The Box

Back-up Battery

Cover

Telephone Ports

Service Port*On/Off

Power Input

Antenna

For more detailed information on Light Indicators, please refer to the User Guide.

*Reserved for AT&T technical support.

Getting To Know Your Device

Signal Strength

Green: Strong

Yellow: Moderate

Red: No Service

Battery Charge

Green: High

Yellow: Medium

Red: Low

Voicemail

Green: New message

waiting (Blinking)

No Color: No message

waiting

Power

Green: On

No Color: Off

Phone Cable

(Optional)

Power Cord

AT&T Wireless

Home Phone Base

User Guide

Quick Start

Also Included

Quick Start

081704100044

Back-up

Battery

Useful Tips

• Dial“1”tosetupandaccessyourvoicemail.Besuretocreateapasswordforsecurity

and remote access. Use of answering machine systems is not recommended.

• Transferringalandlinephonenumbercantakeve(5)daysormore.Outgoingcalls

can be made immediately, while incoming calls will continue through your old service

until transfer is complete. Check status at www.att.com/port.

• The“Phone2”portcanbeusedtoconnectanadditionalphone.Thisportusesthe

sametelephonenumberasthe“Phone1”port.

• 10-digitdialingisalwaysrequired,includingforlocalphonenumbers.

Find More Information

Refer to your User Guide, visit att.com/DeviceSupport, or call AT&T Support

at1-800-331-0500.

ServiceprovidedbyAT&TMobility.©2012AT&TIntellectualProperty.Allrightsreserved.AT&T,theAT&Tlogoandall

otherAT&TmarkscontainedhereinaretrademarksofAT&TIntellectualPropertyand/orAT&Tafliatedcompanies.

All other marks contained herein are the property of their respective owners.

Notcompatiblewithhomesecuritysystems,wirelessmessaginganddataservices,faxservice,DVR/Satellitesystems,ormedicalalert

systems,creditcardmachines,IP/PBXPhonesystems,dial-uporDSLinternetservice.TheWirelessHomePhoneBaseisdesignedto

provide coverage that is consistent with other AT&T wireless devices, but AT&T does not represent that the Wireless Home Phone Base

willbetheequivalenttolandlinephoneservice.911callsareroutedbasedonthewirelessnetwork’sautomaticlocationtechnology,but

you may have to provide your home address to emergency responders. AT&T recommends that you always have an alternative means

ofaccessing911servicefromyourhomeduringapowerornetworkoutage,suchasalandlinetelephone.

AT&T Wireless Home Phone Base

Place a Test Call

Place a test call from your connected home phone. Make sure to use

10-digit dialing even for local phone calls.

Forbestresults,placethecordlessphonebaseapproximately12inches

from the Wireless Home Phone Base.

See“UsefulTips”sectionforsettingupvoicemailandcheckingstatusoftransferred

phone numbers.

Connect the Device to a Phone

1) Unplug your phone

fromyourhome’s

phone wall jack.

2) Plugyourphoneintothe“Phone1”

port on the Wireless Home Phone

Base, using your existing phone

cable or included phone cable.

Before You Begin

Wireless Home Phone Base works exclusively with the AT&T cellular

network and DOES NOT use your home’s phone wall jacks.

Your device should be located:

• Whereyouhaveastrongcellularsignalfromacelltower,typicallyneara

window or outside wall.

• Nearanelectricalwalloutlet.

Check the Wireless Signal

Raise antenna to an upright position.

Conrmsignalstrengthlightisgreenforoptimalperformance.Yellow

indicatesamoderatesignalandmaybesufcient.

Install the Back-up Battery

Remove the lid from the battery compartment.

Insert the battery connection cable into the battery port.

Place the back-up battery in the battery slot and replace the battery cover.

Connect the Power Cord

Insert the small end of the power cord into the Power Input port on the

back of your Wireless Home Phone Base.

Plug the power cord into an electrical wall outlet that is not controlled by

a wall switch.

IMPORTANT: DONOTplugtheWirelessHome

PhoneBaseintoyourhome’sphonewalljack.