ZTE GN290 Digital Mobile Phone User Manual Manual

ZTE Corporation Digital Mobile Phone Manual

Manual

ZTE-G N290
Mobile Phone
User Manual
2
FCC COMPLIANCE STATEMENT
Thisdevicecomplieswithpart15oftheFCCRules.Operationis
subjecttothefollowingtwoconditions:(1)Thisdevicemaynot
causeharmfulinterference,and(2)thisdevicemustacceptany
interferencereceived,includinginterferencethatmaycause
undesiredoperation.
These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or
television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and
3
receiver.
- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for
help.
Warning
Changes or modifications made to this equipment not
expressly approved by ZTE for compliance could void the
user's authority to operate the equipment.
Health and safety information
The phone with internal antenna has been tested for
compliance with FCC RF Exposure (SAR) limits and is
complied with FCC RF exposure compliance
requirements.
Exposure to radio frequency energy
Radio wave exposure and Specific Absorption Rate (SAR)
information The handset is designed to comply with safely,
requirements for exposure to radio waves. This
requirement is based on scientific guidelines that include
4
safety margins designed to assure the safety of all persons,
regardless of age and health.
The radio wave exposure guidelines employ a unit of
measurement known as the Specific Absorption Rate, or
SAR. Tests for SAR are conducted using a standardized
method with the
Phone transmitting at its highest certified power level in all
used frequency bands. While there may be differences
between the SAR levels of various ZTE phone models, they
are all designed to meet the relevant guidelines for exposure
to radio waves.
The SAR limit recommended is 1.6W/kg averaged over one
(1) gram of tissue. The highest SAR value for this device
when tested at the ear was 0.713W/kg, and when tested at
the body it was 0.830 W/kg SAR compliance for
bodyworn operations is restricted to belt-clips, holsters,
or similar accessories that have no metallic component in
the assembly and which provide at least 1.5 cm separation
between the device, including its antenna, and the users
body.
LEGAL INFORMATION
5
Copyright © 2009 by ZTE CORPORATION
All Rights Reserved.
No part of this publication may be excerpted, reproduced,
translated or utilized in any form or by any means, electronic
or mechanical, including photocopying and microfilm,
without the prior written permission of ZTE Corporation.
The manual is published by ZTE Corporation. We reserve
the right to make modifications on print errors or update
specifications without prior notice.
Version No. : R1.0
Edition Time :
Manual No. :
6
Security
To protect your mobile phone from illegal use, take the
security measures as follows:
¾ Set PIN codes of the SIM card.
¾ Set handset lock code.
¾ Set call restrictions.
Safety Precautions
This section includes some important information on safe
and efficient operation. Please read this information before
using the phone.
Operational Precautions
Please use your phone properly. When making or
receiving a call, please hold your phone as holding a
wireline telephone. Make sure that the phone is at least
one inch (about two point five centimeters) from your
body when transmitting.
Do not touch the antenna when the phone is in use.
Touching the antenna area affects call quality and may
7
cause the phone to operate at a higher power level than
needed.
Some people may be susceptible to epileptic seizures
or blackouts when exposed to flashing lights, such as
when watching television or playing video games. If you
have experienced seizures or blackouts, or if you have a
family history of such occurrences, please consult your
doctor before playing video games on your phone or
enabling a flashing-light feature on your phone. (The
flashing-light feature is not available on all products.)
Keep the phone out of the reach of small children. The
phone may cause injury if used as a toy.
Precautions While Driving
Please pay attention to the traffic safety. Check the laws
and regulations on the use of your phone in the area
where you drive. Always obey them.
Use hands-free function of the phone, if available.
Pull off the road and park before making or answering a call
if conditions require.
Precautions for Medical Devices and Facilities
8
When using your phone near pacemakers, please always
keep the phone more than eight inches (about twenty
centimeters) from the pacemaker when the phone is
switched on. Do not carry the phone in the breast
pocket. Use the ear opposite the pacemaker to minimize
the potential for interference. Switch off the phone
immediately if necessary.
Some phones may interfere with some hearing aids.
In the event of such interference, you may consult
your hearing aids manufacturer to discuss alternatives.
If you use any other personal medical device, please
consult the manufacturer of your device to determine if it
is adequately shielded from RF energy.
In those facilities with special demand, such as hospital or
health care facilities, please pay attention to the
restriction on the use of mobile phone. Switch off your
phone if required.
Mobile Phone
Please use original accessories or accessories
approved by the phone manufacturer. Using any
unauthorized accessories may affect your mobile
9
phone’s performance, damage your phone or even cause
danger to your body and violate related local regulations
about telecom terminals.
Turn off your phone before you clean it. Use a damp or
anti-static cloth to clean the phone. Do not use a dry cloth
or electrostatically charged cloth. Do not use chemical or
abrasive cleaners as these could damage the phone.
As your mobile phone can produce electromagnetic field,
do not place it near magnetic items such as computer
disks.
Using the phone near electrical appliances such as TV,
telephone, radio and personal computer can cause
interference.
Do not expose your mobile phone to direct sunlight or
store it in hot areas. High temperatures can shorten the
life of electronic devices.
Keep your phone dry. Any liquid may damage your
phone.
Do not drop, knock or harshly treat the phone. Rough
handling can break internal circuit boards.
Do not connect the phone with any incompatible
10
enhancement.
Do not attempt to disassemble the mobile phone or
battery.
Do not store the phone with flammable or explosive
articles.
Do not charge the mobile phone without battery.
Precautions for Potentially Explosive Atmospheres
Switch off your phone prior to entering any area with
potentially explosive atmospheres, such as fueling areas,
fuel or chemical transfer or storage facilities.
Do not remove, install, or charge batteries in such areas.
Spark in a potentially explosive atmosphere can cause
an explosion or fire resulting in bodily injury or even
death.
To avoid possible interference with blasting operations,
switch off your phone when you are near electrical blasting
caps, in a blasting area, or in areas posted “Turn off
electronic devices.” Obey all signs and instructions.
Precautions for Electronic Devices
11
Some electronic devices are susceptible to
electromagnetic interference sent by mobile phone if
inadequately shielded, such as electronic system of
vehicles. Please consult the manufacturer of the device
before using the phone if necessary.
Safety and General Use in Vehicles
Safety airbag, brake, speed control system and oil eject
system shouldn’t be affected by wireless transmission.
If you do meet problems above, please contact your
automobile provider. Do not place your phone in the
area over an airbag or in the airbag deployment area.
Airbags inflate with great force. If a phone is placed in
the airbag deployment area and the airbag inflates, the
phone may be propelled with great force and cause
serious injury to occupants of the vehicle.
Please turn off your mobile phone at a refueling point,
and the same to the place where the use of two-way
radio is prohibited.
Aircraft Safety
Please turn off your mobile phone before the airplane
takes off. In order to protect airplane’s communication
12
system from interference, it is forbidden to use mobile
phone in flight. Safety regulations require you to have
permission from a crew member to use your phone while
the plane is on the ground.
If the mobile phone has the function of automatic timing
power-on, please check your alarm setting to make sure
that your phone will not be automatically turned on during
flight.
Battery Use
Do not short-circuit the battery, as this can cause the unit
to overheat or ignite.
Do not store battery in hot areas or throw it into fire.
Otherwise, it will cause explosion.
Do not disassemble or refit the battery. Otherwise, it will
cause liquid leakage, overheating, explosion and ignition
of the battery.
Please store the battery in a cool dry place if you don’t
use it for a long period.
The battery can be recharged for hundreds of times, but it
will eventually wear out. When the operating time (talk
13
time and standby time) is noticeably shorter than normal,
it is time to replace it with a new one.
Please stop using the charger and battery when they
are damaged or show evidence of aging.
Return the worn-out battery to the provider or dispose of
it in accordance with environment regulations. Do not
dispose of it in household rubbish.
Please use original batteries or batteries approved by the
phone manufacturer. Using any unauthorized battery
may affect your handset performance or may cause
danger of explosion, etc.
Warning: If the battery is damaged, do not discharge it. If the
leakage does come into contact with the eyes or skin, wash
thoroughly in clean water and consult a doctor.
Limitation of Liability
ZTE shall not be liable for any loss of profits or indirect,
special, incidental or consequential damages resulting from
or arising out of or in connection with using this product,
whether or not ZTE had been advised, knew or should have
known the possibility of such damages. The user should
14
refer to the enclosed warranty card for full warranty and
service information.
Note: The pictures and icons shown in the manual are just
schematic drawings for function demonstration. If they are
inconsistent with your handset, please take your handset as
the standard. If the inconsistency exits in the manual
because of the handset function updating, please refer to
the follow-up public information from ZTE CORPORATION.
15
Your Phone
Camera key
End key Send key
Touch screen
Receiver
Power key
Memory card connector
USB connector
Volume ke
y
s
OK Key
16
Turn On / Off or wake up your
phone
Hold the Power key to turn your phone on or off.
In MenuSettingsPhone settingsMisc.
settingsLCD backlight, set the LCD backlight time. If the
phone is not operated within this time, the screen will turn
black.
Press the any key to wake up your phone.
Lock / unlock the keypad
In MenuSettingsSecurity settingsAuto keypad
lock, set the auto keypad lock time. If the phone is not
operated within this time, the keypad will be locked. You can
also press the Power key or hold the OK key to lock the
screen in the standby mode.
To unlock the keypad, follow the onscreen instruction to pull
the card down.
Note: In this User Manual, “press a key” means to press the
17
key and release it, while “hold a key” means to press the
key for at least two seconds and then release it. Locking
the keypad can prevent unintentional operations on it.
You can answer an incoming call with the regular operation
when the keypad is locked.
Use the Touchscreen
Your phone supports touch screen functionality.
Tap any application to open it.
Drag up or down to scroll.
18
Interface icons
Indicator What it means
Indicator
What it means
Signal strength
New SMS,
message box full
when blinking
New voicemail New MMS
Missed call MMS downloading
Edge GPRS
Silent Call diverting
Ring Battery status
Outdoor Bluetooth
Meeting Roaming
Headset Alarm clock set
Input Text
You can use the onscreen keyboard to enter text messages,
contact information, notes, and more.
1. Tap a text field, such as in a note or new contact, to
bring up the keyboard.
2. Tap keys on the keyboard.
19
As you type, each letter appears above the keyboard.
Change input mode: Tap the # button to change the
input mode (input modes: eZi ABC, eZi abc, ABC, abc and
123).
Input Letters: In ABC/abc mode, tap the corresponding
letter key till the letter appears.
Input Words: In eZi ABC/eZi abc mode, input any letter
with a single button tap. Tap each button only once for every
letter. The word changes after each button stroke. Predictive
text input is based on a built-in dictionary. When you have
finished writing the word and it is correct, confirm it by tapping
the character string.
Input Digits: In 123 mode, tap the digit button once to
input a digit. In eZi ABC/eZi abc mode, tap the digit button,
and select the number.
Input Symbol: Tap the * button to enter the symbol
mode. In symbol mode select the required symbol by tapping
once. In eZi ABC/eZi abc/ABC/abc mode, tap the 1 button,
and select the required symbol (common symbols).
Input Space: Tap the space button to input a space.
Delete Character: Tap the back button to clear a
20
character.
Move Cursor: Among the text, tap in the position you
want to move.
Adjust the Volume
When you’re on the phone or listening to songs, movies, or
other media, the Volume keys on the right side of your
phone adjust the audio volume.
Otherwise, the keys control the volume for the ringer, and
other sound effects.
Battery
The lithium ion battery of the mobile phone can be immediately
used after unpacking.
Installing the battery
1. Pull the battery cover from the notch on the bottom right
edge and remove the cover.
2. Insert the battery by aligning the gold-coloured contacts
with the contacts in the battery slot.
21
3. Push down the upper section of the battery until it clicks
into place.
4. Replace the battery cover and close it gently until you hear
a click.
Remove battery cover
22
Install battery
Removing the battery
1. Make sure that your mobile phone is switched off.
2. Remove the battery cover.
3. Pull the battery up and remove it from the mobile phone.
23
Charging the battery
Your phone is powered by a rechargeable battery. For
maximum battery performance, it is recommended that you
first use up the battery power and then charge it completely.
A new battery’s full performance is achieved only after three
complete charge and discharge cycles.
Connect your travel adapter to the side of your mobile
phone as shown in the diagram.
Note: The side with arrow should be facing downwards
while connecting.
Connect the other end of the travel adapter to the
24
mains socket.
When you charge the battery, the battery charging
indicator appears.
When the battery is fully charged, disconnect the
charger.
Inserting the SIM card
You want a mobile phone that is sophisticated yet easy to
use and here it is in your hands! Naturally you are eager to
start using it, but first you need to insert the SIM card.
Insert the SIM card as follows:
Make sure that the phone is switched off and the charger
25
is disconnected from the phone.
Turn the phone over and remove the battery cover.
Remove the battery if it is already installed.
Hold your SIM card with the cut corner oriented as
shown and then slide it into the card holder with the
gold-coloured contacts facing downward.
Replace the battery first.
Replace the battery cover.
Every mobile phone has a SIM card (Subscriber Identity
Module). This is a micro-chip that holds your personal
information such as names and phone numbers. Your phone
26
won’t work without it. If you already have contacts on your
SIM card, they can be transferred in most cases.
Inserting the Memory Card
You can use a Memory card to expand the storage of the
phone. You can store or copy files such as videos, photos,
music, and so on.
Do not take out the card or switch off the phone while
transmitting or storing data, which may cause data loss or
damage to the phone or the card.
Insert the Memory card as follows:
The Memory card connector is on the left side of the
phone. Insert the card with the metal contacts facing down
until it clicks to the right position.
27
Take out the touch pen
There is a touch pen in the right top of your phone. Pull it out
and use it to tap any application on the screen.
Otherwise, the touch pen can be used as a antenna.
Elongate it and keep it connecting with your phone when the
signal strength is poor.
28
Phonebook
There are some numbers that you may want to call again
and again, so it makes sense to add these numbers to your
Phonebook. You can then access these numbers quickly
and easily.
Add new contact
Go to MenuPhonebookAdd new contact. (Select a
storage location if you have selected Both in Preferred
storage.) Edit the information and select Done, and then
select Yes to save.
Save number to Phonebook
29
You can also save a number right after you’ve made or
received a phone call or a text message from someone
who is not yet in your Phonebook list.
Quick search
To quickly search for the contacts, enter the first letter of
your desired contact on the screen.
Delete one record
To delete someone from your Phonebook list, first select
the name, then select OptionsDelete.
Copy or move records
You can copy or move the records to SIM, to phone or to file.
Select OptionsCopy or Move.
Set preferred storage
Select OptionsPhonebook settingsPreferred
storage and then select SIM, Phone or Both.
View memory status
Select OptionsPhonebook settingsMemory status
to check the memory status of both phone and SIM.
30
Making and receiving calls
Basic way to make a call
In the standby mode select Dialer icon. Tap the numeric
buttons to input the number and press the Send key to dial.
Dial from the Phonebook
Go to MenuPhonebook. Find the name of the person
you want to call, and press the Send key.
Make an emergency call
You can make emergency calls without the SIM card
inserted so long as you are in an area with network
coverage.
Answer a call
Press the Send key.
End a call
Press the End key.
Use call options
During a call, you can select Options to enter the call
options.
31
You can use the speakerphone by tapping the H-Free
button.
You can put a call on hold, make a new call, and use
applications such as Messaging & Phonebook while you’re
on a call.
Calls
Dialled calls, Received calls and Missed calls are saved in
Calls. If the records are full, the earliest saved records will
be deleted. Select Options to enter the submenu:
View: View your call record details.
Call: Call the record again.
Send message: Send a message to the record.
Save to Phonebook: Save the current number to
Phonebook.
Edit before call: Edit the number before you call.
Delete: Delete the current call record.
Delete all: Delete all your call records.
Advanced options include:
32
Call timers: Check the time of call records.
Call cost: Set Price per unit, and you can view
the call cost.
Text message counter: View the text
messages you sent and received.
GPRS counter: View the GPRS data amount
you sent and received.
Sending and receiving messages
Write a new message
You can use your mobile phone to send and receive
messages.
1. Go to MenuMessagingWrite message.
2. Write your message. For more information on
input method, see section ‘Input text’. The default
message type is SMS.
3. If you want to change to MMS, you can press
Options and choose Switch to MMS; or you can
press Options and choose Add picture, Add
sound, Add video or Add subject to directly insert
33
multimedia contents to the message and it will be
switched to MMS automatically.
4. You can select OptionsSlide options to add a
new slide. And you can select
OptionsAdvanced to insert a text template,
attachment, contact number, contact name or
bookmark.
5. When you finish writing, press OptionsSend to
to enter recipient or add from Phonebook. If you
are writing an MMS, after adding recipients, then
you can select OptionsChange to Cc or
Change to Bcc to change the current contact to
Cc or Bcc.
6. Select OptionsSend to send the message out.
If you want to save the MMS as a draft, select
OptionsSave to Drafts. If you are writing a
SMS,select OptionsSave.
View messages
Upon receiving a message, the mobile phone will alert you
with a ringtone, prompt, or a new message icon.
1. Press View to open the Inbox. You can also go to
34
Inbox through the main menu to read the
message.
2. While the message is open, use Options to reply,
delete or forward the message. You can also
call back the sender.
You can view the message boxes in the Messaging interface.
Select Inbox to view received messages.
Select Drafts to view unsent messages.
Select Outbox to view unsuccessfully sent
and saved messages.
Select Sent messages to view successfully
sent and saved messages.
Messages settings
Go to MenuMessagingMessage settingsText
message.
Profile settings: This is automatically set by
the service provider, but please contact us if
this is not available.
Common settings: You can set Delivery report
and Reply path on or off. You can select to Save
35
sent message or not.
Memory status: View the SIM or Phone
memory status.
Preferred storage: Set the preferred storage
to SIM or Phone.
Preferred connection: Set the preferred
connection to GPRS, GSM or GSM only.
Go to MenuMessagingMessage settingsMultimedia
message.
Profiles: You can activate a MMS profile or
add new ones.
Common settings: In Compose, you can set
Slide time, Creation mode, Picture resizing,
Auto signature and Signature. In Sending,
you can set Validity period, Delivery report,
Read report, Priority, Delivery time, Hide
sender and Send and save. In Retrieval, you
can set Home network, Roaming, Filters,
Read report and Delivery report. And you can
view Memory status.
36
Sending and receiving email
Set up accounts
First you have to setup your email accounts. If the account is
not properly set or activated, you cannot send or receive any
emails.
Go to MenuMessagingEmailEmail accounts.
1. Select Options, and then select New account.
2. Enter your Email address, protocol, data account and
server information, etc.
3. Activate your email account.
Send an email
Go to MenuMessagingEmailWrite Email to edit
your email. When you finish writing, select to send and/or
save the email.
Send and receive emails
If you want to receive emails, go to
MenuMessagingEmail. Select Send and receive,
and the emails in your mailbox will be downloaded to your
phone and the emails in the Outbox will be sent out. Go to
37
Inbox to view your received emails.
User Profiles
Go to MenuSettingsUser profiles. You can select
your preferred profile in this menu. The profile options are:
General, Meeting, Outdoor, Silent, Headset and Bluetooth.
The default settings for each individual profile are preset at
the factory. You can change them in the
Options-Customize menu.
Tone settings: Set the tone for various conditions.
Volume: Set the ring tone and key tone.
Alert type: Choose among four modes based on ring and
vibration.
Ring type: Choose among Single, Repeat and
Ascending.
Extra tone: Let the phone alert when Warning, Error,
Camp on or Connect. .
Note: The Headset mode can only be activated with the
headset connected.
38
Settings
You can adjust various settings of your phone. Go to
MenuSettings.
Pen calibration
If you feel that the contact point of your touch screen is not
accurately positioned, you can fix it by this function.
Complete the calibration operation according to the system
prompts. Tap the centre of the cross until the calibration is
completed.
Phone settings
Time and date: You can set home city, time
and date and format. You can also select
Update with time zone on or off.
Schedule power on/off: Set auto power on
and off time.
Language: You can set the language.
Pref. Input methods: You can set the preferred
input method.
Display: You can set Wallpaper, Virtual
39
Keyboard Vibrator and Clock type.
Greeting text: You can set the greeting text.
Flight mode: You can select to use flight
mode. In flight mode, all wireless functions
are disabled.
Misc. settings: You can set the LCD backlight
brightness and time.
Network settings
In this menu, you can select Automatic/Manual to select the
network service provider according to requests. If you have
selected a service provider manually, you have to manually
select again or return to the Automatic option to select the
service provider when you switch to the SIM card of another
network.
The GPRS Connection can be set to When Needed or
Always.
Security settings
SIM lock: If SIM Lock is currently set Off, select
it again, then input a PIN code to turn it on. You
need to input the correct PIN code to unlock
40
your SIM card when you turn on your mobile
phone next time.
Note: The PUK code is required to unlock the SIM card if
you have incorrectly input the PIN code for three
consecutive times. The PIN code and the PUK code may be
supplied along with the SIM card. If not, contact the network
provider.
Phone lock: Phone lock can prevent your
mobile phone from unauthorized use. Select
On/Off to enable or disable the handset lock
protection.
Auto keypad lock: Select a time for auto
keypad lock, and the phone will automatically
lock the keypad to prevent unintended touch.
Fixed dial: If your SIM card supports this
function and this function is enabled, the phone
can only dial those numbers starting with the
fixed dial number you set. For example, if you
set the fixed dial number to 139, then the phone
can only dial numbers starting with 139.
Barred dial: You can edit the barred dial list
41
and set the bar mode. Please consult the
network provider for this function.
Change password: You can change the PIN,
PIN2 and Phone password here.
Note: You may be required to input the phone lock code in
some of the security settings interfaces. The default lock code
is 1122. Go to Security settingsChange
passwordPhone password to change the phone lock
code.
Connectivity
Bluetooth: See chapter “Bluetooth”.
Conn. Management: You can view your
GPRS connectivity actions.
Data account: You can add and view your
GSM data and GPRS usage.
Restore factory settings
You need to input the correct phone lock password, and
press “OK” to restore factory settings.
Call settings
Caller ID: You can select to Set by network,
42
Hide ID or Send ID.
Call waiting: After this function is activated, the
system will inform you if there is another incoming
call. Please contact your network provider for
details.
Call divert: The call divert service enables you
to divert an incoming call from a service to a
specified telephone number in preset
conditions. You can contact the network
provider to activate this service. You can set
the call divert service so that voice calls and
data calls are diverted to a preset number under
different conditions.
Call barring: You can bar outgoing and
incoming calls.
Line switching: Switch the call line.
Closed user group: You can create groups
and numbers in one group can call each other,
but can not call numbers in other groups.
Advance settings: You can set Auto redial, IP
dial, Call time display, Call time reminder and
43
Auto quick end.
Licence manager
Licence list: Display the list of Licences.
Status: Check the version and time.
Advance: Select Sweep to remove useless
licences and reboot your phone.
Tools
Calendar
Enter Calendar, the calendar of the current month will be
displayed on the screen and the current date will be marked
by a background box in a special colour.
You can click the dates, browse the dates, and click the
direction arrows on the screen to switch the year and month;
the information on the screen will also change consequently.
Tasks
You can add tasks in this: Set Date, Call and Anniversary
tasks.
44
Alarm
You can view and edit the alarm clocks settings. You can
also enable or disable the alarms. By taping Edit, you can
set the corresponding features of the alarm according to
instructions: Repeat type, Time, Alarm tone, Snooze, etc.
World clock
You can view the time in different cities.
Calculator
You can perform simple calculations. You can add, subtract,
multiply or divide, and select M+, M-, MR, and MC to
perform relevant operations.
Note: This calculator has limited accuracy and rounding
errors may occur especially in long division.
Unit converter
Your mobile phone has a unit converter to convert weight
and length. Input the value to perform the conversions, such
as from Kg to Pound, from Kg to Ounce, from Km to Mile,
from M to Yard, from Cm to Inch and from M to Foot.
Currency converter
Your mobile phone provides you with basic functions of
45
currency conversion. Input the Rate, select OK and input a
figure in the Local field, then press OK to get the result.
Ebook reader
Read the ebooks stored in the ..\Ebook folder.
Select an ebook, then press Options to enter the submenu:
Open ebook: Read the ebook.
Clean up bookshelf: Clean up the bookshelf.
Global settings: Set the Font size, Scroll by,
Auto scroll, Scroll speed, Full screen,
Encoding and Alignment.
Book info: View the details of the ebook.
Delete: Delete the ebook.
Delete all files: Delete all the ebooks.
Sort by: Select from Name, Type, Time, Size
or None.
Apply global settings: Activate the global
settings.
Help: To know how to use shortcuts.
46
Files
You can check all the folders in the phone, create new ones
or rename, delete, or sort, etc. The files you download from
the internet will be stored in these folders.
Note: When you select Format, the data will be lost, so
please be careful with this function.
Games
Go to MenuDownloadsGames. Your mobile phone has
classic games pre-loaded. For further information on this,
access the menu and view game Help.
Bluetooth
Go to MenuSettingsConnectivityBluetooth. The
Bluetooth devices must be paired before the communication
is performed.
Turn on or off the Bluetooth on your phone
Go to Power, you can turn on or off Bluetooth.
Make your phone visible
47
Go to BluetoothSettingsVisibility, you can choose to
be visible or not.
When your phone is visible, and the Bluetooth is turned on,
all other Bluetooth-enabled devices within range can detect
your phone.
Create a Bluetooth partnership
1. Go to BluetoothMy deviceInquiry new device to
search other Bluetooth-enabled devices and list them.
2. Select the desired device name in the list and press Pair.
3. Enter a passcode (1 up to 16 characters), and then press
Select. When the opposite party enters the same
passcode, the connection will be established.
Beam information using Bluetooth
After the Bluetooth partnership is established, you can
beam information, such as contacts, and calendar items,
as well as files from your phone to another
Bluetooth-enabled device.
For example, if you want to send an item from the Phonebook
list to the opposite party, find that item, press
OptionsSend contactVia Bluetooth, and then
48
select the device name. If you want to send a multimedia
file, find the file from the Media Album and then press
OptionsSendVia Bluetooth, and then select the
device name.
Connect a Bluetooth hands-free or stereo headset
For hands-free phone conversations or to listen to music, you
can use a Bluetooth hands-free or stereo headset.
Go to BluetoothInquiry audio device to search for the
Bluetooth hands-free or stereo headset.
49
Java
Go to MenuDownloadsJava. MIDlets are
Java™-based applications that can run on your phones. It
supports Java 2 Edition, J2ME™. Java allows you to
download Java-based applications, such as games and
tools that are specifically designed for mobile phones. Java
gives you the flexibility of installing and managing additional
J2ME applications from the Internet.
Camera
Go to MenuCamera or press the Camera key in the
standby mode.
Take a Photo
Go to Camera to take a photo.
Aim the camera at the object and then tap the Camera key
to take the shot.
Before capturing a photo, adjust brightness.
Configure your camera
Go to Camera. Press the icon on the bottom left corner to
50
configure your camera:
Switch to video recorder: Switch to record
video mode.
Photos: Enter Image viewer to view the
photos you’ve just taken.
Camera settings: Set Shutter sound, EV,
Night mode, Contrast, Anti-flicker, Delay timer,
and Cont. shot.
Image settings: Set Image size and Image
quality.
White balance: Select Auto, Daylight,
Tungsten, etc.
Scene mode: Select Auto or Night.
Effect settings: Select Normal, Greyscale,
Sepia, etc.
Storage: Select Phone or Memory card.
Restore default: Restore to factory default
settings.
Take a video
Go to Video recorder to record a scene.
51
Aim the camera at the object and then press the Camera
key to start, press it again to pause, and tap the icon on the
bottom right corner to finish recording.
Before recording a video, adjust brightness and zoom to the
right size.
Configure your video camera
Go to Video camera. Press the icon on the bottom left
corner to configure your video recorder:
Camcorder settings: Set EV, Night mode and
Anti-flicker.
Video settings: Set Video quality, Size limit
reached, Time limit reached, Record audio
and Encode format.
White balance: Select Auto, Daylight,
Tungsten, etc.
Effect settings: Select Normal, Greyscale,
Sepia, etc.
Storage: Select Phone or Memory card.
Restore default: Restore to default factory
settings.
52
Multimedia
Go to MenuPlay
Power Media
You can play the audio and video in your phone or the
memory card.
Image viewer
The images you want to view in Image viewer must be put in
the .. \Photos folder in the phone or Memory card, and in
OptionsStorage, the storage must be set to phone or card
correspondingly.
You can select an image and view it.
Image viewer supports: jpeg, jpg, bmp, gif, png.
Video player
The videos you want to play in Video player must be put in
the ..\Videos folder in the phone or Memory card, and in
OptionsStorage, the storage must be set to phone or
card correspondingly.
You can then select a video and play it.
The Video player supports: H.263 baseline, Mpeg4, 3GP.
53
Audio player
You can play the audio in your phone or the memory card.
In My playlists, you can edit your playlists, set storage or
make personal settings.
To create a playlist, in My playlists, select OptionsNew
playlist, and then set the list name. Select
OptionsLoadOptionsAdd, and select the files or
folder, then the list will be loaded.
Audio player supports: AMR-NB, AMR-WB+, WAV, AAC,
AAC+, MP3, MIDI.
Sound recorder
Go to OptionsNew record to record a sound clip. Go to
OptionsSettings to set preferred storage, File format and
Audio quality. Go to OptionsList to view the sound clips
you recorded.
FM radio
With the radio, you can search for radio channels, listen to
them, and save them on your device. Note that the quality
of the radio broadcast depends on the coverage of the
radio station in that particular area. The wired headset
54
works as an antenna, so always connect the headset
when using the radio. When you receive an incoming call
while listening to the radio, the radio will switch off. In the
FM radio interface, select Options to enter the submenu.
Channel list: Edit up to 9 channels.
Manual input: Manually input a channel.
Auto search: Automatically searches for
channels.
Settings: You can turn on Background play,
and Loudspeaker. You can set Record format,
Audio quality, Record storage and Channel
effect.
Record: Record the current channel.
Append: Continue to record AMR files on the
current file.
File list: Display the list of files.
55
VIVO Chip
VIVO Chip service requires network support. Please consult
your network operator or service provider for details on
usability and quotation of VIVO Chip services. Your service
provider should provide you with all the instructions you
need to know how to use this service. You can use the
value-added services provided by your network operator.
WAP
Your phone supports Wireless Application Protocol (WAP).
You can get access to this service through your network
provider. WAP lets you get information about news, weather
forecasts and more.
Go to MenuWAP. You can perform the following
operations:
Homepage: Homepage is a WAP site you set in Settings
Profiles.
Bookmarks: Access your phone’s preset websites.
Select a bookmark and press Go to to load the website
56
or you can select Edit, Send, Delete, Delete all or Add
bookmark.
Recent pages: Display the pages you’ve visited recently.
Select an item and choose Go to to visit the page again.
Offline pages: Web pages saved on your mobile phone
can be viewed while your phone is offline.
Input address: Input a URL and press Done to visit the
site.
Service inbox: Check the service information sent by
your service provider.
Settings: You can set Profiles, Browser options, Service
message settings, Clear cache, Clear cookies or Trusted
certificates.
TV
Go to MenuTV, You can perform the following operations:
TV Program List: Display the list of TV programs.
Audio Program List: Display the list of audio programs.
Auto Search: Search the programs automatically.
57
Manual Search: Search the programs manually.
Area Set: Set the country you are in.

Navigation menu