ZTE K3765-Z USB Modem User Manual K3765 Z Safety Rev2

ZTE Corporation USB Modem K3765 Z Safety Rev2

K3765 Z User Manual Safety Rev2

RF Exposure 4Specic Absorption Rate (SAR) 4Body worn operation 4Regulatory information 5Distraction 6Driving 6Operating machinery 6Product Handling 6Small Children 7Air Bags 8Emergency Calls 8Device Heating 8WEEE Approval 8Electrical Safety 8Accessories 8Connection to a Car 9Faulty and Damaged Products 9Table of contents
Interference 9Pacemakers 9Hearing Aids 10Medical devices 10Hospitals 10Aircraft 10Interference in cars 11Explosive environments 11Petrol stations and explosive atmospheres 11Blasting Caps and Areas 11
Regulatory informationThe following approvals and notices apply in specic regions as noted.CE Approval (European Union)The wireless device is approved to be used in the member states of the EU. ZTE declares that the wireless device is in compliance with the essential requirements and other relevant provisions of the Radio and Telecommunications Terminal Equipment Directive 1999/5/EC (R&TTE Directive).Federal Communications Commission Notice (United States): Before a wireless device model is available for sale to the public, it must be tested and certied to the FCC that it does not exceed the limit established by the government-adopted requirement for safe exposure.The SAR limit adopted by the USA and Canada is 1.6 watts/kilogram (W/kg) averaged over one gram of tissue. The highest SAR value reported to the FCC and IC for this device type was compliant with this limit at 5 mm.FCC StatementThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Safety Information 5
DistractionDrivingFull attention must be given to driving at all times in order to reduce the risk of an accident. Using this device while driving causes distraction and can lead to an accident. You must comply with local laws and regulations restricting the use of wireless devices while driving.Operating machineryFull attention must be given to operating the machinery in order to reduce the risk of an accident.Product HandlingYou alone are responsible for how you use your device and any consequences of its use.You must always switch off your device wherever the use of a mobile phone is prohibited. Use of your device is subject to safety measures designed to protect users and their environment.• Always treat your device and its accessories with care and keep it in a clean and dust-free place.• Do not expose your device or its accessories to open ames or lit tobacco products.• Do not expose your device or its accessories to liquid, moisture or high humidity.• Do not drop, throw or try to bend your device or its accessories.6 Safety Information
Safety Information 7• Do not use harsh chemicals, cleaning solvents, or aerosols to clean the device or its accessories.• Do not paint your device or its accessories.• Do not attempt to disassemble your device or its accessories, only authorised personnel must do so.• Do not expose your device or its accessories to extreme temperatures, minimum –5 and maximum +55 degrees Celsius.• Please check local regulations for disposal of electronic products.Do not carry your device in your back pocket as it could break when you sit down.Caution:Changes or modifications made to this equipment not expressly approved by ZTE for compliance could void the user's authority to operate the equipment.Small ChildrenDo not leave your device and its accessories within the reach of small children or allow them to play with it.They could hurt themselves or others, or could accidentally damage the device. Your device contains small parts with sharp edges that may cause an injury or which could become detached and create a choking hazard.
Air BagsDo not place this device in the area over an air bag or in the air bag deployment area.Store the device safely before driving your vehicle.Emergency CallsThis device, like any wireless device, operates using radio signals, which cannot guarantee connection in all conditions. Therefore, you must never rely solely on any wireless device for emergency communications.Device HeatingYour device may become warm during charging and during normal use.WEEE ApprovalThe wireless device is approved to be used in the member states of the EU. ZTE declares that the wireless device is in compliance with the essential requirements and other relevant provisions of the Waste Electrical and Electronic Equipment Directive 2002/96/EC (WEEE Directive).Electrical SafetyAccessoriesOnly use approved accessories.8 Safety Information
Do not connect with incompatible products or accessories.Connection to a CarSeek professional advice when connecting a device interface to the vehicle electrical system.Faulty and Damaged ProductsDo not attempt to disassemble the device or its accessory.Only qualied personnel must service or repair the device or its accessory.If your device or its accessory has been submerged in water, punctured, or subjected to a severe fall, do not use it until you have taken it to be checked at an authorised service centre.InterferenceCare must be taken when using the device in close proximity to personal medical devices, such as pacemakers and hearing aids.PacemakersPacemaker manufacturers recommend that a minimum separation of 15 cm be maintained between a device and a pacemaker to avoid potential interference with the pacemaker. Safety Information 9
Hearing AidsPeople with hearing aids or other cochlear implants may experience interfering noises when using wireless devices or when one is nearby.The level of interference will depend on the type of hearing device and the distance from the interference source, increasing the separation between them may reduce the interference. You may also consult your hearing aid manufacturer to discuss alternatives.Medical devicesPlease consult your doctor and the device manufacturer to determine if operation of your device may interfere with the operation of your medical device.HospitalsSwitch off your wireless device when requested to do so in hospitals, clinics or health care facilities. These requests are designed to prevent possible interference with sensitive medical equipment.AircraftSwitch off your wireless device whenever you are instructed to do so by airport or airline staff.Consult the airline staff about the use of wireless devices on board the aircraft, if your device offers a ‘ight mode’ this must be enabled prior to boarding an aircraft.10 Safety Information
Interference in carsPlease note that because of possible interference to electronic equipment, some vehicle manufacturers forbid the use of devices in their vehicles unless an external antenna is included in the installation.Explosive environmentsPetrol stations and explosive atmospheresIn locations with potentially explosive atmospheres, obey all posted signs to turn off wireless devices such as your device or other radio equipment.Areas with potentially explosive atmospheres include fuelling areas, below decks on boats, fuel or chemical transfer or storage facilities, areas where the air contains chemicals or particles, such as grain, dust, or metal powders.Blasting Caps and AreasTurn off your device or wireless device when in a blasting area or in areas posted turn off “two-way radios” or “electronic devices” to avoid interfering with blasting operations.Safety Information 11
FCC PART 15 statement Section 15.19 Labelling requirements This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Section 15.21 Information to user Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment Section 15.105 (b) Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help.

Navigation menu