ZTE K4607-Z DC-HSPA+ USB Modem User Manual USB Medom
ZTE Corporation DC-HSPA+ USB Modem USB Medom
ZTE >
User manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2259673 |
| Application ID | cPlH2+WTxzMJLA/e46E96Q== |
| Document Description | User manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 48.59kB (607318 bits) |
| Date Submitted | 2014-05-07 00:00:00 |
| Date Available | 2014-11-04 00:00:00 |
| Creation Date | 2017-10-22 23:58:32 |
| Producing Software | GPL Ghostscript 9.18 |
| Document Lastmod | 2017-10-22 23:58:32 |
| Document Title | USB Medom |
| Document Creator | Microsoft® Word 2010 |
| Document Author: | user |
K4607-Z DC-HSPA+ USB Modem Quick Guide ZTE CORPORATION NO. 55, Hi-tech Road South, ShenZhen, P.R.China Postcode: 518057 Tel: +86-755-26779999 URL: http://www.zte.com.cn E-mail: mobile@zte.com.cn LEGAL INFORMATION Copyright © 2013 ZTE CORPORATION. All rights reserved. No part of this publication may be excerpted, reproduced, translated or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE Corporation. The manual is published by ZTE Corporation. We reserve the right to make modifications on print errors or update specifications without prior notice. Version No.: 1.0 Edition Time: 2013, 07 Quick Guide Introduction The ZTE K4607-Z USB modem is a multi-mode USB modem, working in HSPA+/HSUPA/HSDPA/WCDMA/EDGE/GPRS/GSM networks. With USB interface connecting to a laptop or a desktop PC, it integrates the functionality of a modem and a mobile phone (SMS), and combines mobile communication with Internet perfectly. It supports data and SMS services through the mobile phone network, enabling you to communicate anytime and anywhere. Getting to know your device The following figure shows the appearance of the K4607-Z. It is only for your reference. The actual product may be different. 1. microSD card slot 2. SIM/USIM card slot 3. USB Connector 4. Modem Cap 5. Front Cover NOTE： The microSD Logo ( ) is a trademark of SD-3C, LLC. Indicator Indicator Status Description Red Turn on but not register. Green Bright Register to 2G/3G network. Green Twinkling Connect to 2G/3G network. Confidential and Proprietary Information of ZTE CORPORATION 1 Hardware Installation 1. Open the front cover to remove it from the modem. NOTE: Do not open the front cover rudely to avoid the damage of the front cover. 2. Insert the SIM card into the SIM card slot. 3. Insert the microSD card into the microSD card slot. NOTE: This modem only supports microSD card. 4. Replace the front cover and click it into place. 2 Confidential and Proprietary Information of ZTE CORPORATION 5. Connect the Modem to your laptop or desktop PC. Plug the USB connector into your computer’s USB port and make sure that it is tightly inserted. The OS will automatically recognize the new hardware, and then start the installation wizard. Warning and Notice To the Owner • Some electronic devices are susceptible to electromagnetic interference sent by modem if inadequately shielded, such as the electronic system of vehicles. Please consult the manufacturer of the device before using the modem if necessary. • Operating the modem may interfere with medical devices like hearing aids and pacemakers. Please always keep them more than 20 centimeters away from such medical devices when they are turned on. Turn the modem off if necessary. Consult a physician or the manufacturer of the medical device before using the modem. • Be aware of the usage limitation when using a modem at places such as oil warehouses or chemical factories, where there are explosive gases or explosive products being processed. Turn off your modem if required. • The use of electronic transmitting devices is forbidden in aircrafts, at petrol stations and in hospitals. Please observe and obey all warning signs and switch off your modem in these conditions. Confidential and Proprietary Information of ZTE CORPORATION 3 • Do not touch the inner antenna area if not necessary. Otherwise it will affect your modem’s performance. • Store the modem out of the reach of little children. The modem may cause injury if used as a toy. • Do not touch the metallic parts of the modem so as to avoid a burn, when the modem is working. Use Your USB Modem • Please use original accessories or accessories that are authorized. Using any unauthorized accessories may affect your modem’s performance, and violate related national regulations about telecom terminals. • Avoid using the modem near or inside metallic structures or establishments that can emit electromagnetic waves. Otherwise it may influence signal reception. • The modem is not waterproof. Please keep it dry and store in a shady and cool place. • Do not use the modem immediately after a sudden temperature change. In such case, it will produce dew inside and outside the modem, so don’t use it until it becomes dry. • Handle the modem carefully. Do not drop, bend or strike it. Otherwise the modem will be damaged. • No dismantling by non-professionals and only qualified technicians can undertake repair work. • Operating temperature range of -10 ℃ ~ +55 ℃ and humidity range of 5% ~ 95% are recommended. Limited Warranty • This warranty does not apply to defects or errors in the Product caused by: i. Reasonable abrasion. ii. End User’s failure to follow ZTE’s installation, operation or maintenance instructions or procedures. iii. End User’s mishandling, misuse, negligence, or improper installation, disassembly, storage, servicing or operation of the Product. 4 Confidential and Proprietary Information of ZTE CORPORATION iv. Modifications or repairs not made by ZTE or a ZTE-certified individual. v. Power failures, surges, fire, flood, accidents, actions of third parties or other events outside ZTE’s reasonable control. vi. Usage of third-party products, or usage in conjunction with third-party products provided that such defects are due to the combined usage. vii. Any other cause beyond the range of normal usage intended for the Product. End User shall have no right to reject or return the Product, or receive a refund for the Product from ZTE under the above-mentioned situations. • This warranty is End User’s sole remedy and ZTE’s sole liability for defective or nonconforming items, and is in lieu of all other warranties, expressed, implied or statutory, including but not limited to the implied warranties of merchantability and fitness for a particular purpose, unless otherwise required under the mandatory provisions of the law. Limitation of Liability ZTE shall not be liable for any loss of profits or indirect, special, incidental or consequential damages resulting from or arising out of or in connection with using of this product, whether or not ZTE had been advised, knew or should have known of the possibility of such damages, including, but not limited to lost profits, interruption of business, cost of capital, cost of substitute facilities or product, or any downtime cost. How to Get Help You can get Help by: • Clicking Help on the software. • Sending E-mail to mobile@zte.com.cn • Visiting http://www.zte.com.cn • Calling Service Hotline: +86–755–26779999 Confidential and Proprietary Information of ZTE CORPORATION 5 Troubleshooting Problem Can not establish the USB connection between your device and PC. The client connected to the device can not access the Internet. Can not visit the webGUI configuration page. Can not connect to the network automatically in Windows 8 operating system. Suggested Solution You need to install the software. Run the installation program in path of My Computer > ZTEMODEM. If the driver of your device is abnormal, please reinstall the software. You need to uninstall the software first. Make sure your SIM card is available. Change the location to find a place with good signal. Check network settings. Contact with your service provider and confirm your APN settings. Enter the correct address. The http://192.168.0.1 or http://m.home. Only use one network adapter in your PC. Do not use any proxy server. default address is Click the icon on the task bar of the screen when you insert the device to the PC, and then tick the Connect automatically checkbox in the Networks, then click Connect. FCC Regulations: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 6 Confidential and Proprietary Information of ZTE CORPORATION -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment. RF Exposure Information (SAR) This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard for wireless device employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. *Tests for SAR are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. This is because the device is designed to operate at multiple power levels so as to use only the poser required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. SAR compliance has been established in the host product(s) (laptop computers), tested at 5mm separation distance to the human body, and tested with USB slot configurations including Horizontal-UP, Horizontal-Down, Vertical-Front, Vertical-Back. This device can be used in host product(s) with substantially similar physical dimensions, construction, and electrical and RF characteristics. The highest SAR value, tested per FCC RF exposure guidelines for USB dongle, as described in this user guide, is 1.33 W/kg. The FCC has granted an Equipment Authorization for this device with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this device is on file with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid after searching on FCC ID: SRQ-K4607-Z. Confidential and Proprietary Information of ZTE CORPORATION 7
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V4.4 (128-bit) User Access : Print, Extract, Print high-res Author : user Create Date : 2014:04:29 09:48:51+08:00 Modify Date : 2014:04:29 09:49:07+08:00 Language : zh-CN Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Format : application/pdf Creator : user Title : USB Medom Creator Tool : Microsoft® Word 2010 Metadata Date : 2014:04:29 09:49:07+08:00 Producer : Microsoft® Word 2010 Document ID : uuid:76d4a22b-da6e-438c-8f54-4ec477986c54 Instance ID : uuid:02f13b10-09f9-4045-b8ab-1c1f1565d09d Page Count : 9EXIF Metadata provided by EXIF.tools