ZTE MF190B HSPA USB Stick User Manual MF190

ZTE Corporation HSPA USB Stick MF190

Contents

User manual

  MF190B USB Modem Quick Guide       ZTE CORPORATION   NO. 55, Hi-tech Road South, ShenZhen, P.R.China       Postcode: 518057
  LEGAL INFORMATION  Copyright © 2010 ZTE CORPORATION.  All rights reserved.  No part of this publication may be excerpted, reproduced, translated or utilized in any form or by any  means,  electronic  or  mechanical,  including  photocopying  and  microfilm,  without  the  prior written permission of ZTE Corporation.  The manual is published by ZTE Corporation. We reserve the right to make modifications on print errors or update specifications without prior notice.     Version No. : R1.0
 Confidential and Proprietary Information of ZTE CORPORATION 1    C h a p t e r    1   Quick Guide Introduction The  ZTE  USB  modem  is  a  multi-mode  USB  modem,  working  in HSUPA/HSDPA/WCDMA/EDGE/GPRS/GSM networks. With USB interface connecting to a laptop or a desktop PC, it integrates the functionality of a modem and a mobile phone (SMS), and combines mobile communication  with  Internet  perfectly.  It  supports  data  and  SMS  services  through  the  mobile  phone network, enabling you to communicate anytime and anywhere. Specification The following table shows the specification of your device. Interface Type USB 2.0 HIGH SPEED Systems supported Supports most types of laptop and desktop PC. Operating systems supported Windows XP, Vista, Windows 7 MAC 10.4, 10.5, 10.6 Functions SMS service, Data service, Applications management, etc. Network Standards HSUPA/HSDPA/WCDMA/EDGE/GPRS/GSM Transmission speed (Max) HSUPA: 5.76Mbps UL HSDPA: 7.2Mbps DL Temperature Storage: -40℃  ~ +80℃ Operation:-10℃  ~ +60℃ Dimension 76mm×26mm×11mm(without cap) Weight About 21g   Getting to know your device  The  following  figure  shows  the  appearance  of  the  MF190B.  It  is  only  for  your  reference.  The  actual product may be different.
   MF190 Quick Guide 2 Confidential and Proprietary Information of ZTE CORPORATION  1. Indicator 2. Front Cover 3. Modem Cap 4. SIM/USIM card slot 5. USB Connector  Hardware Installation 1. Put finger on the bottom finger grip, and then lift the front cover of the modem to release and remove.      Notes: Do not open the front cover rudely so as to avoid the damage of the front cover.     2. Insert the SIM/USIM card into the SIM/USIM card slot. Insert the SIM/USIM card with the metal contact area facing downwards into the slot, and then push SIM/USIM card as far as possible, shown as the following picture.
  MF190 Quick Guide  Confidential and Proprietary Information of ZTE CORPORATION 3       3. Put the front cover of the modem flatly upon the body of modem. Direct the front cover towards the locking catches on the sides of the modem and push the front cover of the modem to lock the front cover into its place.   4. Connect the Modem to your laptop or desktop PC.  Plug the USB connector into your computer’s USB port and make sure that it is tightly inserted.    The OS automatically detects and recognizes new hardware and starts the installation wizard.     Software Installation Guide On different operating systems, the installation procedures may be difference. Follow the system prompts during operation. For Windows OS Your system will start the software setup process automatically when you connect the modem to your
   MF190 Quick Guide 4 Confidential and Proprietary Information of ZTE CORPORATION computer correctly. Follow the system prompts to complete the software installation.   Notes: If the system does not launch installation automatically, you can run the installation program in path of My Computer > ZTEMODEM.  For Mac OS The system will automatically display a ZTEMODEM CD-ROM icon on the desktop, when you connect the  modem  to  your  computer  correctly.  Double  click  the  installation  software  package  in  the ZTEMODEM, and follow the system prompts to complete the software installation.   Safe removal from your system Please close the application software, and then you can pull out the USB Modem safely.  How to use your modem Various icons are presented to enable quick operation of the following functions:  Connect Connect to the Internet.  SMS Click New button, enter recipient’s number and content, and then click Send to send new message.  Phonebook Click New to fill in a new contact person and contact details.  Settings Set the configuration for the USB modem.  Data records Show the connection information.   Warning and Notice To the owner • Some electronic devices are susceptible to electromagnetic interference sent by modem if inadequately shielded, such as the electronic system of vehicles. Please consult the manufacturer of the device before using the modem if necessary. • Operating of laptop and desktop PCs and the modem may interfere with medical devices like hearing aids  and  pacemakers.  Please  always  keep  them  more  than  20  centimeters  away  from  such  medical devices  when  they  are  turned  on.  Turn  the  modem  off  if  necessary.  Consult  a  physician  or  the manufacturer of the medical device before using the modem. • Be aware of the usage limitation when using a  modem at  places such as oil warehouses or chemical factories, where there are explosive gases or explosive products being processed. Turn off your modem if required. • The use of electronic transmitting devices is forbidden in aircrafts, at petrol stations and in hospitals. Please observe and obey all warning signs and switch off your modem in these conditions.
  MF190 Quick Guide  Confidential and Proprietary Information of ZTE CORPORATION 5    • Do not touch the inner antenna area if not necessary. Otherwise it will affect your modem’s performance. • Store the modem out of the reach of little children. The modem may cause injury if used as a toy. • Do not touch the metallic parts of the modem so as to avoid a burn, when the modem is working. Using your USB Modem • Please use original accessories or accessories that are authorized. Using any unauthorized accessories may affect your modem’s performance, and violate related national regulations about telecom terminals. • Avoid  using  the  modem  near  or  inside  metallic  structures  or  establishments  that  can  emit electromagnetic waves. Otherwise it may influence signal reception. • The modem is not waterproof. Please keep it dry and store in a shady and cool place. • Do not use the modem immediately after a sudden temperature change. In such case, it will produce dew inside and outside the modem, so don’t use it until it becomes dry. • Handle the modem carefully. Do not drop, bend or strike it. Otherwise the modem will be damaged. • No dismantling by non-professionals and only qualified technicians can undertake repair work. • Operating temperature range of -10℃  ~ +60℃  and humidity range of 5% ~ 95% are recommended. Limited Warranty • This warranty does not apply to defects or errors in the Product caused by: i. Reasonable abrasion. ii. End User’s failure to follow ZTE’s installation, operation or maintenance instructions or procedures. iii. End  User’s  mishandling,  misuse,  negligence,  or  improper  installation,  disassembly,  storage, servicing or operation of the Product. iv. Modifications or repairs not made by ZTE or a ZTE-certified individual. v. Power  failures, surges,  fire, flood,  accidents, actions  of third  parties  or  other events outside  ZTE’s reasonable control. vi. Usage of third-party products, or usage in conjunction with third-party products provided that such defects are due to the combined usage. vii. Any other cause beyond the range of normal usage intended for the Product. End User shall have no right to reject or return the Product, or receive a refund for the Product from ZTE under the above-mentioned situations.  • This warranty is End User’s sole remedy and ZTE’s sole liability for defective or nonconforming items, and is in lieu of all other warranties, expressed, implied or statutory, including but not limited to the implied  warranties  of merchantability  and fitness  for  a  particular purpose,  unless otherwise  required under the mandatory provisions of the law. Limitation of Liability ZTE shall not be liable for any loss of profits or indirect, special, incidental or consequential  damages resulting from or arising out of or in connection with using of this product, whether or not ZTE had been advised, knew or should have known of the possibility of such damages, including, but not limited to lost profits, interruption of business, cost of capital, cost of substitute facilities or product, or any downtime cost.
   MF190 Quick Guide 6 Confidential and Proprietary Information of ZTE CORPORATION FCC Compliance This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. • This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be  determined  by  turning  the  equipment  off  and  on,  the  user  is  encouraged  to  try  to  correct  the interference by one or more of the following measures:  Reorient or relocate the receiving antenna.  Increase the separation between the equipment and receiver.  Connect  the  equipment  into  an  outlet  on  a  circuit  different  from  that  to  which  the  receiver  is connected.  Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment.  • The antenna(s)  used for this  transmitter must  not be co-located or  operating in conjunction with  any other antenna or transmitter. Radio Frequency (RF) Energy This model device meets the government’s requirements for exposure to radio waves. This  device  is  designed  and  manufactured  not  to  exceed  the  emission  limits  for  exposure  to  radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government: The  exposure  standard  for  wireless  devices  employs  a  unit  of  measurement  known  as  the  Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. *Tests for SAR are conducted using standard  operating  positions  accepted  by  the  FCC  with  the  device  transmitting  at  its  highest  certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. This is because the device is designed to operate at multiple power levels so as to use only the poser required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. The highest SAR value for the model device as reported to the FCC when worn on the body, as described in this user guide, is 0.951W/kg(Body-worn measurements differ among device models, depending upon available enhancements and FCC requirements.) While there may be differences between the SAR levels of various devices and at various positions, they all meet the government requirement. The FCC has  granted an Equipment Authorization for this  model device with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model device is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching on FCC ID:Q78-MF190B For body operation, this device has been tested and meets the FCC RF exposure guidelines for use the positions the device a minimum of  5mm from the body. Use of other enhancements may not ensure compliance with FCC RF exposure guidelines.
  MF190 Quick Guide  Confidential and Proprietary Information of ZTE CORPORATION 7    How to get help You can get Help by: • Clicking Help on the software. • Sending E-mail to mobile@zte.com.cn • Visiting http://www.zte.com.cn • Calling Service Hotline: +86–755–26779999

Navigation menu