ZTE MF64 Mobile Hotspot User Manual Safety and Warranty Information

Download:
Mirror Download [FCC.gov]
Document ID	2343367
Application ID	EnehebjwaBspujGgoWGbUw==
Document Description	User manual_Safety and Warranty Information
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	70.55kB (881862 bits)
Date Submitted	2014-08-01 00:00:00
Date Available	2015-01-29 00:00:00
Creation Date	2017-10-21 18:26:58
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-10-21 18:26:58
Document Title	User manual_Safety and Warranty Information
Document Creator	Adobe InDesign CS6 (Windows)

Copyright © 201
•
•
unqualified
qualified
with
battery
the system
or charger
per may
this present
standard.
a risk
Useofoffire,
an
explosion, leakage, or other hazard.
Do not short circuit a battery or allow metallic conductive
objects to contact battery terminals.
Replace the battery only with another battery that has
been qualified with the system per this standard, IEEE-
order to protect airplane’s communication system from
interference, it is never allowed to use the device when
in flight. Get aircrew’s permission if you want to use the
device prior to take-off.
Hospital Safety
Third Party Equipment
•
The use of third party equipment, cables or accessories, not
made or authorized by ZTE, may invalidate the warranty of the
device and also adversely affect the device’s operation.
Follow the instructions given by any respective medical facility
regarding the use of Wireless devices on their premises.
Road Safety
•
T-Mobile 4G HotSpot Z64
•
Product Safety and Warranty Information
Promptly dispose of used batteries in accordance with local
regulations
Batterydropping
Avoid
usage by
the
children
device should
or battery.
be supervised.
If the device or battery
is dropped,
suspects
damage,
especially
take iton
to a service
hard surface,
center for
and
inspection.
the user
•
•
•
•
User Manual
•
hazard.
For those host devices that utilize a USB port as a charging
source, the host device's user manual shall include a statement
that the device shall only be connected to CTIA certified
adapters, products that bear the USB-IF logo or products that
have completed the USB-IF compliance program.
Aircraft Safety
•
Do not use your device before the airplane takes off. In
including either installed or portable wireless equipment, in
the area over the airbag or in the airbag deployment area. If
in-vehicle wireless equipment is improperly installed and the
You must exercise proper control of your vehicle at all
times. Give your full attention to driving.
Observe all of the recommendations contained in your local
Please check if local laws and/or regulations restrict the
use of wireless devices while driving.
Do not use your device at a refueling point, such as a gas
station, even if you are not refueling your own car.
•
•
the same compartment as the device.
Electronic systems in a vehicle, such as anti-lock brakes, speed
control and fuel injection systems are not normally affected by
radio transmissions. The manufacturer of such equipment may
advise if it is adequately shielded from radio transmissions. If
you suspect vehicle problems caused by the radio transmitter in
the device, consult your dealer and do not use the device until
For optimum performance with minimum power consumption,
do not cover the device with anything. Covering the device
may cause the device to operate at higher power levels than
needed.
FCC Compliance(FOR PART 15B/PART 15C)
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may
cause undesired operation.
the manufacturer could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part
Vehicles Equipped with an Airbag
•
Only use the battery with a charging system that has been
An airbag inflates with great force. Do not place objects,
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and
receiver.
— Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
— Consult the dealer or an experienced radio/ TV technician
for help.
The exposure standard for wireless devices employs a unit of
This device meets the government’s requirements for exposure
to radio waves.
This device is designed and manufactured not to exceed the
emission limits for exposure to radio frequency (RF) energy
set by the Federal Communications Commission of the U.S.
Government.
The SAR limit set by the FCC is 1.6W/kg. *Tests for SAR are
conducted using standard operating positions accepted by
the FCC with the device transmitting at its highest certified
power level in all tested frequency bands. Although the SAR
is determined at the highest certified power level, the actual
SAR level of the device while operating can be well below the
maximum value. This is because the device is designed to
operate at multiple power levels so as to use only the poser
required to reach the network. In general, the closer you are to
a wireless base station antenna, the lower the power output.
The device was tested according to FCC RF exposure
procedures to address hand and near-body exposure
conditions, and the highest SAR value as reported to the FCC
is 1.27 W/kg.
While there may be differences between the SAR levels of
various devices and at various positions, they all meet the
government requirement
The FCC has granted an Equipment Authorization for this
device with all reported SAR levels evaluated as in compliance
with the FCC RF exposure guidelines. SAR information on
this device is on file with the FCC and can be found under
the Display Grant section of www.fcc.gov/oet/ea/fccid after
searching on FCC ID: SRQ-MF64 .
This device has been tested and meets the FCC RF exposure
guidelines.
10
RF Exposure Information (SAR)
SAR compliance for body operation is based on a separation
distance of 10 mm between the unit and the human body.Carry
this device, at least 10 mm away from your body to ensure RF
exposure level compliant or lower to the reported level.
CTIA Compliance
a) Do not disassemble or open crush, bend or deform,
puncture or shred.
b) Do not modify or rem anufacture. attempt to insert foreign
objects in to the battery, immerse or expose to water or
c)
d) Only use the battery with a charging system that has
been qualified with the system per CTIA Certification
Requiremens for Battery System Compliance to IEEE
e) Do not short circuit a battery or allow metallic conductive
objects to contact battery terminals.
f) Replace the battery only with another battery that has been
Use of an unqualified battery may present a risk of fire,
explosion, leakage or other hazard.
g) Promptly dispose of used batteries in accordance with local
regulations.
h) Battery usage by children should be supervised.
j) Avoid dropping the device or battery. If the device or battery
is dropped, especially on a hard surface, and the user
11
suspects damage, take it to a service center for in spection,
k) Improper battery use may result in
hazard.
For those host devices that utilize a USB port as a charging
source, the host device's user manual shall include a
statement that the device shall only be connected to CTIA
certified adapters, products that bear the USB-IF logo or
products that have completed the USB-IF compliance program.
Battery Caution
•
Do not short-circuit the battery metal contacts, as this can
•
Do not carry a battery in a pocket or purse where it may
come into contact with metal objects such as coins or keys.
This may cause a short-circuit and result in excessive heat
•
To avoid risk of personal injury, never dispose of battery
•
•
Do not disassemble or modify the battery.
Do not expose battery to high temperatures exceeding
140°F /60°C.
When not using the battery for a long period, remove it from
the device and store it in a cool and dry place.
If the battery is worn out or damaged, do not use the power
charger adapter.
Discard worn or damaged batteries at proper recycling
centers. Do not dispose of the battery in household
garbage containers.
•
•
•
12
Warning:
If the battery is broken, keep away from it. If any material leaks
from the battery and makes contact with your skin, wash your
skin with abundant fresh water and get medical assistance if
necessary.
2. Consumer Limited Warranty
ZTE ("Seller") offers you a limited warranty that the enclosed
product or products (the "Product") will be free from defects in
material and workmanship for a period that expires one year
from the date of sale of the Product to you, provided that you
are the original end-user purchaser of the Product and provided
that your purchase was made from a supplier authorized by
the Seller. Transfer or resale of a Product will automatically
terminate warranty coverage with respect to that Product. This
limited warranty is not transferable to any third party, including
but not limited to any subsequent purchaser or owner of the
Product. This limited warranty is applicable only to end users in
the United States.
Seller will, at its sole and absolute discretion, either repair or
replace a Product (for which Seller may use refurbished parts
of similar quality and functionality) if found by Seller to be
defective in material or workmanship, or if Seller determines
that it is unable to repair or replace such Product, Seller will
refund the purchase price for such Product, provided that
the subject Product (i) is returned to a Seller authorized
13
service center within the one year warranty period, and (ii) is
accompanied by a proof of purchase in the form of a bill of sale
or receipted invoice which evidences that the subject Product
is within the one year warranty period. After the one year
warranty period, you must pay all shipping, parts and labor
charges. In the event that the Product is deemed un-repairable
or has been removed from the list of products supported by the
Seller, you will only be liable for shipping and labor charges.
This limited warranty does not cover and is void with respect
to the following: (i) any Product which has been improperly
installed, repaired, maintained or modified; (ii) any Product
which has been subjected to misuse (including any Product
used in conjunction with hardware electrically or mechanically
incompatible or used with accessories not approved by Seller),
abuse, accident, physical damage, abnormal operation,
improper handling, neglect, exposure to fire or liquid; (iii)
any Product operated outside published maximum ratings;
(iv) cosmetic damage; (v) any Product on which warranty
stickers or Product serial numbers have been removed,
altered, or rendered illegible; (vi) cost of installation, removal
or reinstallation; (vii) signal reception problems (unless caused
by defects in material and workmanship); (viii) damage as a
including damage caused by mishandling, shipping and blown
fuses; (ix) consumables (such as fuses); or (x) any Product
14
which has been opened, repaired, modified or altered by
anyone other than Seller or a Seller authorized service center.
USE ONLY SELLER APPROVED ACCESSORIES WITH SELLER
DEVICES. USE OF ANY UNAUTHORIZED ACCESSORIES
MAY BE DANGEROUS AND WILL INVALIDATE THE DEVICE
WARRANTY IF SAID ACCESSORIES CAUSE DAMAGE OR A
DEFECT TO THE DEVICE.
SELLER SPECIFICALLY DISCLAIMS LIABILITY FOR
ANY AND ALL DIRECT, INDIRECT, SPECIAL, GENERAL,
PUNITIVE, EXEMPLARY, AGGRAVATED, INCIDENTAL
OR CONSEQUENTIAL DAMAGES, EVEN IF ADVISED
OF THE POSSIBILITY OF SUCH DAMAGES, WHETHER
FORESEEABLE OR UNFORESEEABLE OF ANY KIND
WHATSOEVER, INCLUDING BUT NOT LIMITED TO LOSS
OF PROFITS, UNANTICIPATED BENEFITS OR REVENUE,
ANTICIPATED PROFITS ARISING OUT OF USE OF OR
INABILITY TO USE ANY PRODUCT (FOR EXAMPLE,
WASTED AIRTIME CHARGES DUE TO THE MALFUNCTION
OF A PRODUCT) OR CONTRIBUTION OR INDEMNITY IN
RESPECT OF ANY CLAIM RELATED TO A PRODUCT.
REPAIR OR REPLACEMENT OF A DEFECTIVE PRODUCT
OR REFUND OF THE PURCHASE PRICE RELATING
TO A DEFECTIVE PRODUCT, AS PROVIDED UNDER
THIS WARRANTY, ARE YOUR SOLE AND EXCLUSIVE
REMEDIES FOR BREACH OF THE LIMITED WARRANTY,
AND SUBJECT TO THIS WARRANTY, THE PRODUCTS ARE
APPROVED AND ACCEPTED BY YOU "AS IS". SELLER
15
MAKES NO OTHER WARRANTIES, REPRESENTATIONS
OR CONDITIONS OF ANY KIND, ORAL OR VERBAL,
EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE,
WITH RESPECT TO THE PRODUCTS, INCLUDING BUT NOT
LIMITED TO ANY IMPLIED WARRANTY OR CONDITION
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE OR AGAINST INFRINGEMENT OR ANY IMPLIED
WARRANTY OR CONDITION ARISING OUT OF TRADE
USAGE OR OUT OF A COURSE OF DEALING OR COURSE
O F P E R F O R M A N C E . N O D E A L E R , D I S T R I B U TO R ,
AGENT OR EMPLOYEE IS AUTHORIZED TO MAKE ANY
MODIFICATION OR ADDITION TO THIS WARRANTY.
Some jurisdictions do not allow the exclusion or limitation of
incidental or consequential damages, or allow limitations on
how long an implied warranty lasts, so the above limitations or
exclusions may not apply to you. This limited warranty gives
which vary from jurisdiction to jurisdiction.
For warranty support information, please contact your cellular
provider's Customer Care.
or return to the point of sale for the products.
16

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Create Date                     : 2013:01:10 10:18:03+08:00
Creator                         : Adobe InDesign CS6 (Windows)
Modify Date                     : 2014:07:30 09:13:05+08:00
Has XFA                         : No
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Instance ID                     : uuid:dde43cb6-b267-4cef-b968-1bff07629383
Original Document ID            : adobe:docid:indd:3df5dd53-2c07-11e0-aa4a-d990e16b0585
Document ID                     : xmp.id:CABE57EECB5AE2118900984C88712325
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:C9BE57EECB5AE2118900984C88712325
Derived From Document ID        : xmp.did:742FC3813B59E211BCA2D21B79CE16E3
Derived From Original Document ID: adobe:docid:indd:3df5dd53-2c07-11e0-aa4a-d990e16b0585
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CS6 (Windows)
History Changed                 : /
History When                    : 2013:01:10 10:18:03+08:00
Metadata Date                   : 2014:07:30 09:13:05+08:00
Creator Tool                    : Adobe InDesign CS6 (Windows)
Thumbnail Width                 : 256
Thumbnail Height                : 36
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 5550 bytes, use -b option to extract)
Format                          : application/pdf
Producer                        : Adobe PDF Library 10.0.1
Trapped                         : False
N Pages                         : 1
Has Visible Transparency        : False
Has Visible Overprint           : True
Max Page Size W                 : 680.000354
Max Page Size H                 : 104.999965
Max Page Size Unit              : Millimeters
Font Name                       : Arial-Black, Arial-BoldMT, ArialMT
Font Family                     : Arial, Arial, Arial
Font Face                       : Black, Bold, Regular
Font Type                       : Open Type, Open Type, Open Type
Font Version                    : Version 2.40, Version 3.00, Version 3.00
Font Composite                  : False, False, False
Font File Name                  : ariblk.TTF, ARIALBD.TTF, ARIAL.TTF
Plate Names                     : Black
Swatch Groups Group Name        : 默认色板组
Swatch Groups Group Type        : 0
Page Count                      : 2
For                             : Administrator,
Title                           : MF96 Safty Insert-0110.pdf
Bounding Box                    : 22 8 1907 275
Container Version               : 11
Creator Version                 : 14
Image Height                    : 267
Image Width                     : 1885
Image Size                      : 1885x267
Megapixels                      : 0.503

EXIF Metadata provided by EXIF.tools