Contents
- 1. User manual_Safety and Warranty Information
- 2. User manual
User manual
GETTING TO KNOW YOUR MOBILE HOTSPOT
Charging & USB port
LCD screen
ON/OFF switch
WPS keymicro-SIM card slot
Part Description
Micro-SIM
card slot Install the micro-SIM card.
WPS key
Double-press to show SNTP time, SSID, Wi-Fi
password and software version on the LCD screen.
Double-press again to exit.
When the Wi-Fi function is enabled, hold it for less
than 3 seconds to disable the Wi-Fi function.
When the Wi-Fi function is enabled, hold it for more
than 3 seconds to active the WPS function.
When the Wi-Fi function is disabled, hold it for more
than 3 seconds to enable the Wi-Fi function only.
ON/OFF
switch Slide it to turn on/off the HotSpot.
LCD
Screen
It shows the signal type, signal strength, battery, Wi-Fi,
etc.
Charging/
USB port
Charge your device.
Connect the client to your device via USB cable.
Reset point
Insert a pin and hold it
for 3 seconds to reset
your device.
Coverage not available in some areas. Please see coverage details
at T-Mobile.com. Device and screen images are simulated. Capable
device is required to achieve 4G speed.
INDICATORS
Indicates that your
Mobile HotSpot is
on T-Mobile’s 2G
network.
Indicates how
many devices are
connected to the
Mobile HotSpot.
Indicates that your
Mobile HotSpot is
on T-Mobile’s 3G
network.
Indicates that the
Wi-Fi function is
disabled.
Indicates that your
Mobile HotSpot is
on T-Mobile’s 4G
network.
New text message
in your message
Inbox.
There is no signal. There is no battery
installed.
Indicates that your
device is connected
to the Internet.
Indicates that the
battery power is low.
Indicates that
your device is
disconnected from
the Internet.
Indicates that the
battery power is full.
SET UP YOUR MOBILE HOTSPOT
1. Lift SIM cover and Install SIM card.
2. Power on.
Slide to turn on
Charge your Mobile HotSpot
You can charge your Mobile HotSpot using the charger included in
the box or by plugging it into your computer using the USB cable.
CONNECT & GO
Connect your Wi-Fi device to your Mobile HotSpot
1. Power on your Mobile HotSpot.
2. On your computer or other Wi-Fi enabled device, search for
available Wi-Fi Networks and select the default Network Name
(SSID) for your Mobile HotSpot.
3. Enter the default password and click OK.
Note:
It may take up to a minute to establish a connection.
Then the default Network Name (SSID) and password will
appear in the screen on your Mobile HotSpot or lift off the
password
It may take up to a minute to establish a connection.
4. Open a web browser and go to www.T-Mobile.com/ConnectMe
Simply follow the on-screen instructions to set up your No An-
nual Contract data service.
Note: Service or use is your agreement to T-Mobile’s Terms and
Conditions. T-Mobile requires ARBITRATION of disputes UNLESS
YOU OPT-OUT WITHIN 30 DAYS OF ACTIVATION. See T-Mobile’s
Terms and Conditions for details at www.T-Mobile.com/terms-condi-
tions.
USE THE WPS
If your client device supports WPS, you don’t have to input the pass-
word manually after WPS has been available. Please do the follow-
ing steps:
1. Power on your Mobile HotSpot and enable the Wi-Fi function.
2. Press and hold the WPS key on your device for more than 3 sec-
onds to start Wi-Fi Protected Setup authentication process.
3. Enable the WPS function on your client to respond to this au-
thentication process.
-
tion.
Note: For the detailed operations about the client, please refer to the
client’s instruction
MANAGING YOUR MOBILE HOTSPOT
Access T-Mobile 4G Mobile Hotspot
You can access your 4G Mobile Hotspot device information, using an
Internet browser
To access using a browser, do the following:
1. Connect to your hotspot device via Wi-Fi using the network con-
nection software on your computer. Provide the Wi-Fi network
password, if requested.
2. Open a browser and enter http://mobile.hotspot in the address
bar. The T-Mobile 4G Mobile Hotspot login screen appears.
3. Enter your Password
is admin.
4. Select the Save Password checkbox if you wish to bypass the
login screen in the future.
5. Click Login. If you entered the correct password, the Dashboard
screen appears.
To access via USB cable, do the following:
1. Connect your hotspot device to the PC with USB cable.
2. Power on your device.
installation automatically. After successful installation, the icon
will appear on your desktop.
NOTE: If the system does not launch installation automatically,
you can run the installation program in path of My Computer >
Mobile Hotspot.
4. Double click the icon to open the login screen.
5. Enter your Password
is admin.
6. Select the Save Password checkbox if you wish to bypass the
login screen in the future.
7. Click Login. If you entered the correct password, the Dashboard
screen appears.
Change Mobile Hotspot Admin Password
1. Access http://mobile.hotspot
2. Click Settings in the navigation area.
3. Select the Device Settings tab
4. Follow steps under Account Management to update your Pass-
word
5. Click Apply. If everything is entered correctly, the Admin Pass-
word Changed dialog appears indicating the password was suc-
cessfully changed.
Change Mobile Hotspot Network Name (SSID)
1. Access http://mobile.hotspot.
2. Click Settings in the navigation..
3. Select the Wi-Fi Settings tab.
4. Change the name that appears in the Network Name (SSID)
5. Select or deselect the Broadcast Network Name checkbox
to enable or disable broadcasting the hotspot’s Network Name
(SSID).
6. Click Apply to save your changes on the Wi-Fi Settings tab of
the Settings screen.
Change Mobile Hotspot Wi-Fi Password
1. Access http://mobile.hotspot.
2. Click Settings in the navigation area.
3. Select the Wi-Fi Settings tab.
4. Change the value that appears in the Pass Phrase
Wi-Fi Settings area.
5. Click Apply to save your changes on the Wi-Fi Settings tab of
the Settings screen.
ADDITIONAL INFORMATION
Capable device(s) required to achieve 4G speeds.
Wi-Fi: Capable devices required. Devices using wireless connec-
tions may be vulnerable to unauthorized attempts to access data and
software stored on the device. Plan data allotment applies to use by
connected devices sharing Wi-Fi. Use of connected devices subject
to T-Mobile Terms and Conditions.
Mobile Internet Postpaid Data Passes: Qualifying postpaid plan
and qualifying credit required. SIM Starter Kit may be required.
Passes do not include voice or messaging. Pass charges will appear
on bill statement for effective date of the pass. May purchase one
add’l pass in same category prior to expiration of active pass. Partial
-
lotment then slowed to up to 2G speeds. No domestic or internation-
for time/usage amount provided by pass. For time period, a day is 12
any applicable promotional data, then monthly plan allotment.
Mobile Internet Pay In Advance Data Passes: Limited time of-
fer; subject to change. Not all features available on all devices. SIM
starter kit may be required. Service available for time period and/or
usage amount provided by Pass. For time period, a day is 12:00 am
session. Only one Pass may be active at a time. Account suspended
after 365 days of inactivity. Data only; does not include voice, mes-
saging or Wi-Fi services. Domestic only; no roaming. Usage applied
Internet allotment.
Device and screen images simulated. Coverage: Service not avail-
able in some areas. See brochures and Terms and Conditions (in-
cluding arbitration provision) at www.T-Mobile.com, for additional
information, coverage maps, and restrictions and details. T -Mobile
and the magenta color are registered trademarks of Deutsche
Telekom AG. © 2014 T-Mobile USA, Inc.
ADDITIONAL HELP
T-Mobile Mobile HotSpot URL: http://mobile.hotspot/
or IP address: 192.168.0.1.
From http://mobile.hotspot, click for help.
Get in touch, free of charge: Just dial 611 from your T-Mobile
phone or call 1-877-453-1304. Customer Care representatives
-
ed account help is available 24 hours a day, 7 days a week.