ZTE MF833V LTE/WCDMA/GSM(EDGE,GPRS) USB modem User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3775629
Application ID	FWJe8fTsjs2Vr2+CwztrPQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	37.7kB (471243 bits)
Date Submitted	2018-03-12 00:00:00
Date Available	2018-03-12 00:00:00
Creation Date	2018-03-09 14:28:19
Producing Software	福昕PDF打印机 版本 8.1.1.1026
Document Lastmod	2018-03-09 14:28:19
Document Title	User Manual

MF833V
USB Modem
Quick Start Guide
ZTE CORPORATION
NO. 55, Hi-tech Road South, Shenzhen, P.R.China
LEGAL INFORMATION
Copyright © 2017 ZTE CORPORATION.
All rights reserved.
No part of this publication may be excerpted, reproduced, translated or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without
the prior written permission of ZTE Corporation.
The manual is published by ZTE Corporation. We reserve the right to make modifications
on print errors or update specifications without prior notice.
Version No. : R1.0
Edition Time: April 13, 2017
Manual No.:
Getting to Know Your
our Modem
Your modem supports data and SMS services through the mobile phone network,
enabling you to communicate anytime and anywhere.
The following figure
igure is only for your reference. The actual product may be different.
1.
Modem cap
2.
Front cover
3.
Indicator light
4.
USB connector
5.
microSDHC™ card slot
6.
micro-SIM card slot
NOTE:
microSDHC logo
is a trademark of SD-3C, LLC.
Installing the micro-SIM
SIM Card and microSDHC Card
1.
Press and push the front cover and remove it.
NOTE:
Do not open the front cover rudely. Failing to do so may cause damage to the front cover.
2.
Install a micro-SIM
SIM card to the micro-SIM card slot.
WARNING!
Your modem does not support SIM cards and nano-SIM cards.. To avoid damage to the
modem,, do not use those cards or any card holders.
3. Install a microSDHC card to the microSDHC
microSD
card slot.
4. Slide the front cover gently back into place.
Connecting the Modem to Your PC
Insert the modem into your computer’s USB port securely. The operating system
automatically detects and identifies your modem and starts the installation wizard.
NOTE:
If the system does not launch installation automatically, you can double
double-click the modem
installation icon in My Computer to install the software.
Accessing the Internet
After the modem is connected to your computer successfully, you can access the
Internet in Automatic or Manual mode. The default mode is Automatic
Automatic.
Mode
Automatic
Operation
Your modem is connected to the Internet automatically, and
you can surf on the Internet directly.
Manual
1. Log in to the 4G Hostless Modem configuration page.
2. Select Network Settings > Connection Mode > Manual,
and then click Apply.
3.Click
to return to the home page, and then click
or
NOTE:
To modify the parameters of your modem, log in to the 4G Hostless Modem configuration page
by visiting http://192.168.10
100.1.
Getting More Help
You can get help by:

Sending an email to mobile@zte.com.cn

Visiting www.ztedevice.com
Warning and Notice
Using Your Modem
 If inadequately shielded, some electronic devices may be affected by the
electromagnetic interference caused by the modem, such as the electronic system of
vehicles. Consult the manufacturers of such devices before using the modem if
necessary.
 Operating the modem may interfere with medical instruments such as hearing aids
and pacemakers. Always keep the modem more than 20 centimeters away from such
medical instruments when your modem is turned on. Turn the modem off if necessary.
Consult a physician or the manufacturers of medical instruments before using the
modem if necessary.
 Be aware of the usage limitation when using the modem at places such as oil
warehouses or chemical factories, where there are explosive gases or explosive
products being processed. Turn off the modem if necessary.
 Do not use electronic transmission devices in aircrafts, at petrol stations or in
hospitals. Observe and obey all warning signs, and turn off the modem in these
conditions.
 Do not touch the inner antenna area unless it is necessary. Otherwise the
performance of the modern may be affected.
 Keep the modem out of the reach of little children. The modem may cause an injury if
used as a toy.
 When the modem is operating, do not touch the metallic parts. Failing to do so may
cause burns.
 Use original accessories or accessories that are authorized. Using any unauthorized
accessories may affect the performance of the modem and violate the related
national regulations about telecom terminals.
 Avoid using the modem near or inside metallic structures or establishments that can
emit electromagnetic waves, because signal reception may be affected.
 The modem is not waterproof. Keep the modem dry and store it in a shady and cool
place.
 Do not use the modem immediately after a sudden temperature change. In such case,
dew may be generated inside and outside the modem, so do not use it until it
becomes dry.
 Handle the modem carefully. Do not drop, bend or strike it. Otherwise the modem
may be damaged.
 Only qualified personnel can dismantle and repair the modem.
 An operating temperature between -10°C and +55°C and a humidity between 5% and
95% are recommended.
Limited Warranty
• This
i.
warranty does not apply to defects or errors in the product caused by:
Reasonable abrasion.
ii. End users’ failure to follow ZTE’s installation, operation or maintenance instructions
or procedures.
iii. End users’ mishandling, misuse, negligence, or improper installation, disassembly,
storage, servicing or operation of the product.
iv. Modifications or repairs not provided by ZTE or a ZTE-certified individual.
v. Power failures, surges, fire, flood, accidents, and actions of third parties or other
events outside ZTE’s reasonable control.
vi. Usage of third-party products, or usage in conjunction with third-party products if
such defects are due to the combined usage.
vii. Any other cause beyond the range of normal usage intended for the product.
End users have no right to reject or return the product, or receive a refund for the
product from ZTE under the above-mentioned situations.
 This warranty is end users’ sole remedy and ZTE’s sole liability for defective or
nonconforming items, and is in lieu of all other warranties, expressed, implied or
statutory, including but not limited to the implied warranties of merchantability and
fitness for a particular purpose, unless otherwise required under the mandatory
provisions of the law.
Limitation of Liability
ZTE shall not be liable for any loss of profits or indirect, special, incidental or
consequential damages resulting from or arising out of or in connection with using of this
product, no matter whether or not ZTE had been advised, knew or should have known of
the possibility of such damages, including, but not limited to lost profits, interruption of
business, cost of capital, cost of substitute facilities or product, or any downtime cost.
FCC Regulations
This device complies with part 15 of the FCC Rules. Operation is subject to the
condition that this device does not cause harmful interference.
This device has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
 Reorient or relocate the receiving antenna.
 Increase the separation between the equipment and receiver.
 Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
 Consult the dealer or an experienced radio/TV technician for help.
CAUTION:
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
FCC RF Exposure Information (SAR)
This device is designed and manufactured not to exceed the emission limits for exposure
to radio frequency (RF) energy set by the Federal Communications Commission of the
United States.
During SAR testing, this device is set to transmit at its highest certified power level in all
tested frequency bands, and placed in positions that simulate RF exposure in usage
against the head with no separation, and near the body with the separation of 5 mm.
Although the SAR is determined at the highest certified power level, the actual SAR level
of the device while operating can be well below the maximum value. This is because the
device is designed to operate at multiple power levels so as to use only the power
required to reach the network. In general, the closer you are to a wireless base station
antenna, the lower the power output.
The exposure standard for wireless devices employs a unit of measurement known as
the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg.
Tests for SAR are conducted using standard operating positions accepted by the FCC
with the device transmitting at its highest certified power level in all tested frequency
bands.
The FCC has granted an Equipment Authorization for this model device with all reported
SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR
information on this model device is on file with the FCC and can be found under the
Display Grant section of www.fcc.gov/oet/ea/fccid after searching on
FCC ID: SRQ-MF833V.
For this device, the highest reported SAR value for usage near the body is 1.11 W/kg.
While there may be differences between the SAR levels of various devices and at
various positions, they all meet the government requirement.
SAR compliance for body operation is based on a separation distance of 5 mm between
the unit and the human body. Carry this device, at least 5 mm away from your body to
ensure RF exposure level compliant or lower to the reported level. To support body
operation, choose the belt clips or holsters that do not contain metallic components to
maintain a separation of 5 mm between this device and your body.
IC Caution
This device complies with Industry Canada license-exempt RSS standard(s). Operation
is subject to the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference, including interference that may cause
undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils
radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
IC: 10719A-C5610
10

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Page Count                      : 12
Author                          : 
Create Date                     : 2018:03:09 14:28:19+08:00
Creator                         : 
Modify Date                     : 2018:03:09 14:28:19+08:00
Producer                        : 福昕PDF打印机 版本 8.1.1.1026
Subject                         : 
Title                           : 

EXIF Metadata provided by EXIF.tools