Users Manual
ZTD32/MF871A
USB Modem
Quick Start Guide
ZTE CORPORATION
ZTE Plaza, Keji Road South, Shenzhen, China
Tel: +86-755-26779999
URL: http://www.ztedevice.com
E-mail: mobile@zte.com.cn
LEGAL INFORMATION
Copyright © 2015 ZTE CORPORATION.
All rights reserved.
No part of this publication may be excerpted, reproduced, translated or utilized in any form or by
any means, electronic or mechanical, including photocopying and microfilm, without the prior
written permission of ZTE Corporation.
The manual is published by ZTE Corporation. We reserve the right to make modifications on print
errors or update specifications without prior notice.
Version No. : R1.0
Edition Time: January 6, 2016
Manual No.:
1
Getting to Know Your Modem
Your modem supports data service through the mobile phone network, enabling you to
communicate anytime and anywhere.
The following figure is only for your reference. The actual product may be different.
2
Installing the (U)SIM Card
3
Connecting the Modem to Your PC
4
Warning and Notice
To the Owner
• If inadequately shielded, some electronic devices may be affected by the electromagnetic
interference caused by the modem, such as the electronic system of vehicles. Consult the
manufacturers of such devices before using the modem if necessary.
• Operating the modem may interfere with medical instruments such as hearing aids and
pacemakers. Always keep the modem more than 20 centimeters away from such medical
instruments when your modem is turned on. Turn the modem off if necessary. Consult a
physician or the manufacturers of medical instruments before using the modem if necessary.
• Be aware of the usage limitation when using the modem at places such as oil warehouses or
chemical factories, where there are explosive gases or explosive products being processed.
Turn off the modem if necessary.
• Do not use electronic transmission devices in aircrafts, at petrol stations or in hospitals. Observe
and obey all warning signs, and turn off the modem in these conditions.
• Do not touch the inner antenna area unless it is necessary. Otherwise the performance of the
modern may be affected.
5
• Keep the modem out of the reach of little children. The modem may cause an injury if used as a
toy.
• When the modem is operating, do not touch the metallic parts. Failing to do so may cause
burns.
Using Your USB Modem
• Use original accessories or accessories that are authorized. Using any unauthorized accessories
may affect the performance of the modem and violate the related national regulations about
telecom terminals.
• Avoid using the modem near or inside metallic structures or establishments that can emit
electromagnetic waves, because signal reception may be affected.
• The modem is not waterproof. Keep the modem dry and store it in a shady and cool place.
• Do not use the modem immediately after a sudden temperature change. In such case, dew may
be generated inside and outside the modem, so do not use it until it becomes dry.
• Handle the modem carefully. Do not drop, bend or strike it. Otherwise the modem may be
damaged.
• Only qualified personnel can dismantle and repair the modem.
•The product shall only be connected to a USB interface of version USB2.0
•Body-support device test at a typical mode of body support position with minimum 5mm
distance
An operating temperature between -10°C and +45°C and humidity between 5% and 95% are
recommended.
Limited Warranty
• This warranty does not apply to defects or errors in the product caused by:
i. Reasonable abrasion.
ii. End users’ failure to follow ZTE’s installation, operation or maintenance instructions or
procedures.
iii. End users’ mishandling, misuse, negligence, or improper installation, disassembly, storage,
servicing or operation of the product.
6
iv. Modifications or repairs not provided by ZTE or a ZTE-certified individual.
v. Power failures, surges, fire, flood, accidents, and actions of third parties or other events
outside ZTE’s reasonable control.
vi. Usage of third-party products, or usage in conjunction with third-party products if such
defects are due to the combined usage.
vii. Any other cause beyond the range of normal usage intended for the product.
End users have no right to reject or return the product, or receive a refund for the product from
ZTE under the above-mentioned situations.
• This warranty is end users’ sole remedy and ZTE’s sole liability for defective or nonconforming
items, and is in lieu of all other warranties, expressed, implied or statutory, including but not
limited to the implied warranties of merchantability and fitness for a particular purpose, unless
otherwise required under the mandatory provisions of the law.
Limitation of Liability
ZTE shall not be liable for any loss of profits or indirect, special, incidental or consequential
damages resulting from or arising out of or in connection with using of this product, no matter
whether or not ZTE had been advised, knew or should have known of the possibility of such
damages, including, but not limited to lost profits, interruption of business, cost of capital, cost of
substitute facilities or product, or any downtime cost.
FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
7
the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.
Any Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment
Body Operation
This device was tested for typical body support operations. To comply with RF exposure
requirements, a minimum separation distance of 0.5 cm must be maintained between the user’s
body and the device, including the antenna. Third-party belt-clips, holsters, and similar
accessories used by this device should not contain any metallic components. Body accessories
that do not meet these requirements may not comply with RF exposure requirements and should
be avoided. Use only the supplied or an approved antenna.
Getting More Help
You can get help by:
•Sending an email to mobile@zte.com.cn
• Visiting www.ztedevice.com
• Calling the service hotline: +86-755-26779999
Regulatory Conformance Hereby, ZTE Corporation declares that this device is in compliance
with the essential requirements and other relevant provisions of Directive 1999/5/EC.