ZTE MF910L LTE/WCDMA/GSM (GPRS) Multi-Mode Ufi User Manual MF910L quick start guide V1 7

Download:
Mirror Download [FCC.gov]
Document ID	3174651
Application ID	P6au3nWJ23gG+iRtAFEFSw==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	26.27kB (328436 bits)
Date Submitted	2016-10-26 00:00:00
Date Available	2016-10-28 00:00:00
Creation Date	2016-10-13 09:56:22
Producing Software	Acrobat Distiller 10.1.0 (Windows)
Document Lastmod	2016-10-13 09:56:22
Document Title	Microsoft Word - MF910L quick start guide V1.7
Document Creator	PScript5.dll Version 5.2.2
Document Author:	ls

MF910L
Quick Start Guide
ZTE CORPORATION
NO. 55, Hi-tech Road South, Shenzhen, P.R.China
Postcode: 518057
Getting to
t Know You
ur Device
Appearanc
ce
The following fiigure is for your referrence only.
1. Power Key
2. WPS Key


Press and
a hold for 3 second
ds to activate the WP
PS function.
Press to view the Wi-Fi SSID
and password
d on the LCD
screen.
3. (U)SIM Card
d Cover and Reset Hole
4. LCD Screen
5. Charging/miccro-USB Jack
Getting to
t Know You
ur Device
Indicators
When the devicce is powered on, the
e following icons mayy be displayed
on the LCD screen.
For a descrription of the icons, refer to the
following table.
Icon
Description
Network signal strength.
2G, 3G, 4G
Network system
m type. The 4G, 3G or
o 2G icon is
displayed on the
e LCD screen depending on the
connected netwo
ork.
The user is in ro
oaming status.
Connected to the
e Internet.
One or more new
w messages are rece
eived.
Wi-Fi status and
d the number of connected users.
Battery level
Getting to
t Know You
ur Device
Connection Scenarios
The device can
n access the Internett in two ways and it allows
multiple
clients to surf on
o the Internet at the
e same time. The following figures
are for your refference only.
 4G Mode: A (U)SIM card can be used to access the Internet.
 Internet Wi--Fi Mode: Your deviice can be connecteed to a WLAN
device (such
h as a hotspot device
e or wireless router) through Wi-Fi
to access the Internet. The WLAN
device musst be already
o the Internet.
connected to
NOTE: Your device and the WLAN
device must be
b in different
subnets.
Installing
g Your Devic
ce
1. Open the (U)SIM card cover.
NOTE:
Do not remove the cover rudely,
because it is co
onnected
with the device.
2. Install a (U)S
SIM card to the (U)SIIM card slot.
WARNING
G! Your device doe
es not support micrro-SIM cards,
nano-SIM card
ds or any other no
on-standard SIM carrds. To avoid
damage to the device, do not use th
hose cards or any ca
ard holders.
3. Close the (U)SIM card cover.
Connectting to Your Device
Using Wi-F
Fi
1. Power on yo
our device.
2. Ensure that your computer or other
client devices have enabled
Wi-Fi, and se
earch for available wireless
networks.
NOTE: Re
efer to your Wi-Fi-e
enabled client devicce manual for
further details on
o how to search forr wireless networks.
If you use a
computer, you need to set your computer
to obtain an
a IP address
automatically.
name (SSID) of your device, and clicck Connect.
3. Select the Wi-Fi
4. Enter the Wii-Fi password if nece
essary, and click OK.
NOTE: Refe
er to the chapter Gettting to Know the Wi-Fi
SSID and
Password to get
g the default Wi-Fi SSID
and password.
5. Wait until the
e client device is conn
nected to your device
e successfully.
Using a US
SB Cable
1. Connect a co
omputer to your deviice with a USB cable
e.
2. Power on yo
our device. The opera
ating system detects and identifies
new hardware, and automaticallyy installs the software
e.
NOTE:
If the system does not automatically launch installation,, you can click
the device insta
allation icon in My Co
omputer to install the
e software..
3. Wait until the
e computer is conneccted to your device successfully.
Getting to Know th
he Wi-Fi SS
SID and
Passworrd
You can use th
he following methodss to get the default Wi-Fi
SSID and
password.


View th
he label on the device
e.
Press the WPS Key. The
e Wi-Fi SSID and password
are
displayyed on the screen.
Logging in to the 4G
4 Mobile Hotspot
Configurration Page
1. Ensure that the connection bettween your device and
the client
device is corrrect.
2. Launch the Internet browser and enter http://19
92.168.0.1 or
http://ufi.zte
edevice.com in the address
bar.
NOTE: It iss recommended thatt you use IE (7.0 or later), Firefox
(15.0 or later), Opera (10.0 or later), Safari (4.0 or late
er), or Google
Chrome (10.0 or
o later).
3. Enter the password to log in to th
he 4G Mobile Hotspott configuration
page.
e default password iss admin.
NOTE: The
Changing the Wi-Fi SSID or Password
1. Log in to the 4G Mobile Hotspot configuration page.
2. Select Settings > Wi-Fi Settings > Basic Settings.
3. Change the Network Name (SSID) or the Pass Phrase
( Password) in the Main SSID area.
4. Click Apply.
Accessing the Internet
4G Mode
After a client device is successfully connected to your device, you can
access the Internet in Automatic or Manual mode. The default mode
is Automatic.
Mode
Operation
Automatic
Your device is automatically connected to the
Internet, and you can surf on the Internet through
the client.
Manual
1. Log in to the 4G Mobile Hotspot configuration
page.
2. Select Settings > Network Settings >
Dial-up
Settings
WAN
Connection
Mode > Manual, and then click Apply.
3. Select
Home,
Disconnect.
and
click
Connect
or
NOTE:
To modify the parameters of yourr device, log in to th
he 4G Mobile
Hotspot configu
uration page.
Internet Wi-Fi Mode
1. Log in to the
e 4G Mobile Hotspot configuration page.
2. Select Settin
ngs > Internet Wi-Fii.
3. Set the Internet Wi-Fi Switch and
a Preferred Netw
work, and click
Apply.
NOTE: Yo
ou need to set Interrnet Wi-Fi Switch to
o Enable and
Preferred Netw
work to Wi-Fi.
4. Connect to the Wi-Fi hotspot.
The following tw
wo methods are for your
reference.
 Select a Wi-Fi
hotspot listed in the Wi-Fi Hotspott area, enter a
pass phra
ase in the Pass Phrasse text box and click Apply.
 Click Add
d, enter the Wi-Fi ho
otspot information in the Add Wi-Fi
Hotspot area,
and click Apply
y.
After the client device is connected to the Wi-Fi hotspot successfully,
you can access the Internet.
Configuring Your PC
The following procedure describes how to configure the Internet
Protocol in the Windows 7 operating system for your Wi-Fi
connection.
1. Right-click Network and select Properties.
2. Select Change adapter settings.
3. Right-click Wireless Network Connection and select Properties.
4. Select Internet Protocol Version 4 (TCP/IPv4), and click
Properties.
5. Select Obtain an IP address automatically and Obtain DNS
server address automatically, and click OK.
10
Warning and Notice
To the Owner
• If inadequately shielded,
•
•
•
•
•
•
•
some electronic devices, for example, the
electronic system of vehicles, may be affected by the electromagnetic
interference caused by the device. Consult the manufacturers of such
devices before using the device if necessary.
Operating the device may interfere with medical instruments such as
hearing aids and pacemakers. Always keep the device more than 20
centimeters away from such medical instruments when your device is
powered on. Power off the device if necessary. Consult a physician or the
manufacturers of medical instruments before using the device if
necessary.
Be aware of the usage limitation when using the device at places such as
oil warehouses or chemical factories, where there are explosive gases or
explosive products being processed. Power off the device if necessary.
Do not use electronic transmission devices in aircrafts, at petrol stations
or in hospitals. Observe and obey all warning signs, and power off the
device in these conditions.
Do not touch the inner antenna area unless necessary. Otherwise the
performance of the device may be affected.
Do not use the device in an enclosed environment or where heat
dissipation is poor. Prolonged work in such space may cause excessive
heat and raise ambient temperature, which may lead to automatic
shutdown of the device for your safety. In the case of such event, cool the
device in a well-ventilated place before turning on for normal use.
Keep the device out of the reach of small children. The device may cause
an injury if used as a toy.
When the device is operating, do not touch the metallic parts. Failing to
do so may cause burns.
11
Warning and Notice
To the Users
• Use original accessories or accessories that are authorized. Using any
unauthorized accessories may affect the performance of the device and
violate the related national regulations about telecom terminals.
•
Avoid using the device near or inside metallic constructions or
establishments that can emit electromagnetic waves, because signal
reception may be affected.
•
The device is not waterproof. Keep the device dry and store it in a shady
and cool place.
•
Do not use the device immediately after a sudden temperature change,
because dew may be generated inside and outside the device. Do not
use it until it becomes dry.
•
Handle the device carefully. Do not drop, bend or strike it. Otherwise the
device may be damaged.
•
•
Only qualified personnel can dismantle and repair the device.
An operating temperature between -10°C and +45°C and humidity
between 5% and 95% are recommended.
Using Battery
Do not change the built-in rechargeable battery in your device by yourself.
The battery can only be changed by ZTE or ZTE authorized service
provider.
Limited Warranty
This warranty does not apply to defects or errors in the product caused by:
i.
ii.
Reasonable abrasion.
End users’ failure to follow ZTE’s installation, operation or
maintenance instructions or procedures.
12
Warning and Notice
iii.
End users’ mishandling, misuse, negligence, or improper installation,
disassembly, storage, servicing or operation of the product.
iv.
Modifications or repairs not provided by ZTE or a ZTE-certified
individual.
v.
Power failures, surges, fire, flood, accidents, and actions of third
parties or other events outside ZTE’s reasonable control.
vi.
Usage of third-party products or usage in conjunction with third-party
products if such defects are due to the combined usage.
vii.
Any other cause beyond the range of normal usage intended for the
product.
End users have no right to reject or return the product, or receive a refund
for the product from ZTE under the above-mentioned situations.
This warranty is end users’ sole remedy and ZTE’s sole liability for defective
or nonconforming items, and is in lieu of all other warranties, expressed,
implied or statutory, including but not limited to the implied warranties of
merchantability and fitness for a particular purpose, unless otherwise
required under the mandatory provisions of the law.
Limitation of Liability
ZTE shall not be liable for any loss of profits or indirect, special, incidental or
consequential damages resulting from or arising out of or in connection with
using of this product, no matter whether or not ZTE had been advised, knew
or should have known of the possibility of such damages, including, but not
limited to lost profits, interruption of business, cost of capital, cost of
substitute facilities or product, or any downtime cost.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
13
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Any Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.
Body Operation
This device was tested for typical body support operations. To comply with
RF exposure requirements, a minimum separation distance of 1.0 cm must
be maintained between the user’s body and the device, including the
antenna. Third-party belt-clips, holsters, and similar accessories used by
14
this device should not contain any metallic components. Body accessories
that do not meet these requirements may not comply with RF exposure
requirements and should be avoided. Use only the supplied or an approved
antenna.
LEGAL INFORMATION
Copyright © 2015 ZTE CORPORATION.
All rights reserved.
No part of this publication may be excerpted, reproduced, translated or
utilized in any form or by any means, electronic or mechanical, including
photocopying and microfilm, without the prior written permission of ZTE
Corporation.
The manual is published by ZTE Corporation. We reserve the right to make
modifications on print errors or update specifications without prior notice.
Version No.: R1.0
Edition Time: May 13, 2015
Manual No.:
15
Troubleshooting
Problem
Recommended Action
The

connection
Install
the
software,
between your
device and a
run
the
Computer.

If the driver of your device is abnormal,
PC through a
reinstall
USB
uninstall the software first.
cable
cannot
and
installation program in the path of My
the
software.
You
need
to
be
established.
The

connection

between your
device and a

established.
Check the IP address, and ensure that
your client can automatically obtain an IP
cannot
be
Refresh the network list and select the
correct SSID.
client through
Wi-Fi
Ensure that the Wi-Fi function is enabled.
address.

Enter the correct network key (Wi-Fi
password) when you connect the client to
your device.
16
Troubleshooting
Problem
The
Recommended Action
client
connected
the
to


device
cannot access
Ensure that your (U)SIM card is available.
Change the location and find a place with
good signal.

the Internet.
Check the settings of the WAN connection
mode.

Contact your service provider and confirm
your APN settings.
The
client

cannot access
the Internet in
Ensure that the WLAN device has already
been connected to the Internet.

Internet Wi-Fi
Ensure that your device and the WLAN
device are in different subnets.
mode.
The
4G

Enter the correct address. The default
Mobile
address
Hotspot
http://ufi.ztedevice.com.
is
http://192.168.0.1
or
configuration

Use only one network adapter in your PC.
page

Do not use any proxy server.
cannot
be visited.
17

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : ls
Create Date                     : 2016:10:13 09:56:22+08:00
Modify Date                     : 2016:10:13 09:56:22+08:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Creator Tool                    : PScript5.dll Version 5.2.2
Format                          : application/pdf
Title                           : Microsoft Word - MF910L quick start guide V1.7
Creator                         : ls
Producer                        : Acrobat Distiller 10.1.0 (Windows)
Document ID                     : uuid:c1f73551-575d-4328-ba69-c4280e3df4b2
Instance ID                     : uuid:4dacd726-ef6f-4c9d-80f5-3a3a32e3ea68
Page Count                      : 17

EXIF Metadata provided by EXIF.tools