ZTE MF910L LTE/WCDMA/GSM (GPRS) Multi-Mode Ufi User Manual MF910L quick start guide V1 7

ZTE Corporation LTE/WCDMA/GSM (GPRS) Multi-Mode Ufi MF910L quick start guide V1 7

Contents

Users Manual

1 MF910L Quick Start Guide ZTE CORPORATION NO. 55, Hi-tech Road South, Shenzhen, P.R.China Postcode: 518057
Getting tAppearancThe following fi1. Power Key 2. WPS Key  Press a Press screen3. (U)SIM Card4. LCD Screen 5. Charging/mic 2to Know Youce igure is for your referand hold for 3 secondto view the Wi-Fi S. d Cover and Reset Hcro-USB Jack 2 ur Device rence only. ds to activate the WPSSID and passwordole PS function. d on the LCD
Getting tIndicators When the devicon the LCD sfollowing table.Icon 2G, 3G, 4G 3to Know Youce is powered on, thescreen. For a descr Description Network signal sNetwork systemdisplayed on theconnected netwoThe user is in roConnected to theOne or more newWi-Fi status andBattery level ur Device e following icons mayription of the iconsstrength. m type. The 4G, 3G oe LCD screen depeork. oaming status. e Internet. w messages are reced the number of conny be displayed , refer to the or 2G icon is nding on the eived. ected users.
Getting tConnectioThe device canclients to surf oare for your ref 4G Mode: A  Internet Wi-device (suchto access connected to NOTE: Yosubnets. 4to Know Youn Scenariosn access the Interneton the Internet at theference only. (U)SIM card can be -Fi Mode: Your devih as a hotspot devicethe Internet. The Wo the Internet. ur device and the W4 ur Device t in two ways and it ae same time. The folused to access the Iice can be connectee or wireless router) WLAN device musWLAN device must ballows multiple lowing figures Internet. ed to a WLAN through Wi-Fi st be already be in different
Installing1. Open the (U NOTE: Do not remove because it is cowith the device 2. Install a (U)S WARNINGnano-SIM carddamage to the 3. Close the (5g Your Devic)SIM card cover. the cover rudely, onnected . SIM card to the (U)SIG! Your device doeds or any other nodevice, do not use thU)SIM card cover. ce IM card slot. es not support micron-standard SIM carhose cards or any caro-SIM cards, rds. To avoid ard holders.
ConnectUsing Wi-F1. Power on yo2. Ensure that Wi-Fi, and se NOTE: Refurther details ocomputer, you automatically. 3. Select the W4. Enter the Wi NOTE: RefePassword to g5. Wait until theUsing a US1. Connect a co2. Power on yonew hardwa NOTE: If the system dthe device insta3. Wait until the 6ting to Your Fi our device. your computer or oearch for available wefer to your Wi-Fi-eon how to search forneed to set your cWi-Fi name (SSID) of i-Fi password if neceer to the chapter Getget the default Wi-Fi Se client device is connSB Cable omputer to your deviour device. The operare, and automaticallyoes not automaticallallation icon in My Coe computer is connec6 Device other client devices wireless networks. enabled client devicr wireless networks.computer to obtain ayour device, and clicessary, and click OK.tting to Know the WSSID and password.nected to your deviceice with a USB cableating system detectsy installs the softwarey launch installation,omputer to install thected to your device shave enabled ce manual for If you use a an IP address ck Connect. Wi-Fi SSID and e successfully. e. and identifies e. , you can click e software.. successfully.
Getting PassworYou can use thpassword.  View th Press display LoggingConfigur1. Ensure that device is cor2. Launch the http://ufi.zte NOTE: It is(15.0 or later), Chrome (10.0 o3. Enter the papage. NOTE: The 7to Know thrd he following methodshe label on the devicethe WPS Key. Theyed on the screen. in to the 4ration Pagethe connection betrrect. Internet browser edevice.com in the as recommended thatOpera (10.0 or lateor later). ssword to log in to the default password is7 he Wi-Fi SSs to get the default We. e Wi-Fi SSID and p4G Mobile tween your device aand enter http://19address bar. t you use IE (7.0 or r), Safari (4.0 or latehe 4G Mobile Hotspots admin. SID and Wi-Fi SSID and password are Hotspot and the client 92.168.0.1 or later), Firefox er), or Google t configuration
8 Changing the Wi-Fi SSID or Password 1. Log in to the 4G Mobile Hotspot configuration page. 2. Select Settings > Wi-Fi Settings > Basic Settings. 3. Change the Network Name (SSID) or the Pass Phrase ( Password) in the Main SSID area. 4. Click Apply. Accessing the Internet 4G Mode After a client device is successfully connected to your device, you can access the Internet in Automatic or Manual mode. The default mode is Automatic. Mode Operation Automatic Your device is automatically connected to the Internet, and you can surf on the Internet through the client. Manual 1. Log in to the 4G Mobile Hotspot configuration page. 2. Select Settings > Network Settings > Dial-up Settings > WAN Connection Mode > Manual, and then click Apply. 3. Select Home, and click Connect or Disconnect.
NOTE: To modify the Hotspot configuInternet W1. Log in to the2. Select Settin3. Set the InteApply. NOTE: YoPreferred Netw4. Connect to tThe following tw Select a Wpass phra Click AddHotspot a 9parameters of youruration page. i-Fi Mode e 4G Mobile Hotspot ngs > Internet Wi-Firnet Wi-Fi Switch aou need to set Interwork to Wi-Fi. he Wi-Fi hotspot. wo methods are for yWi-Fi hotspot listed ase in the Pass Phrasd, enter the Wi-Fi hoarea, and click Apply9 r device, log in to thconfiguration page.i. and Preferred Netwrnet Wi-Fi Switch toyour reference. in the Wi-Fi Hotspotse text box and click otspot information in y. he 4G Mobile work, and click o Enable and t area, enter a Apply. the Add Wi-Fi
10 After the client device is connected to the Wi-Fi hotspot successfully, you can access the Internet. Configuring Your PC The following procedure describes how to configure the Internet Protocol in the Windows 7 operating system for your Wi-Fi connection. 1. Right-click Network and select Properties. 2. Select Change adapter settings. 3. Right-click Wireless Network Connection and select Properties. 4. Select Internet Protocol Version 4 (TCP/IPv4), and click Properties. 5. Select Obtain an IP address automatically and Obtain DNS server address automatically, and click OK.
11 Warning and Notice To the Owner • If inadequately shielded, some electronic devices, for example, the electronic system of vehicles, may be affected by the electromagnetic interference caused by the device. Consult the manufacturers of such devices before using the device if necessary. • Operating the device may interfere with medical instruments such as hearing aids and pacemakers. Always keep the device more than 20 centimeters away from such medical instruments when your device is powered on. Power off the device if necessary. Consult a physician or the manufacturers of medical instruments before using the device if necessary. • Be aware of the usage limitation when using the device at places such as oil warehouses or chemical factories, where there are explosive gases or explosive products being processed. Power off the device if necessary. • Do not use electronic transmission devices in aircrafts, at petrol stations or in hospitals. Observe and obey all warning signs, and power off the device in these conditions. • Do not touch the inner antenna area unless necessary. Otherwise the performance of the device may be affected. • Do not use the device in an enclosed environment or where heat dissipation is poor. Prolonged work in such space may cause excessive heat and raise ambient temperature, which may lead to automatic shutdown of the device for your safety. In the case of such event, cool the device in a well-ventilated place before turning on for normal use. • Keep the device out of the reach of small children. The device may cause an injury if used as a toy. • When the device is operating, do not touch the metallic parts. Failing to do so may cause burns.
12 Warning and Notice To the Users • Use original accessories or accessories that are authorized. Using any unauthorized accessories may affect the performance of the device and violate the related national regulations about telecom terminals. • Avoid using the device near or inside metallic constructions or establishments that can emit electromagnetic waves, because signal reception may be affected. • The device is not waterproof. Keep the device dry and store it in a shady and cool place. • Do not use the device immediately after a sudden temperature change, because dew may be generated inside and outside the device. Do not use it until it becomes dry. • Handle the device carefully. Do not drop, bend or strike it. Otherwise the device may be damaged. • Only qualified personnel can dismantle and repair the device. • An operating temperature between -10°C and +45°C and humidity between 5% and 95% are recommended. Using Battery Do not change the built-in rechargeable battery in your device by yourself. The battery can only be changed by ZTE or ZTE authorized service provider. Limited Warranty This warranty does not apply to defects or errors in the product caused by: i. Reasonable abrasion. ii. End users’ failure to follow ZTE’s installation, operation or maintenance instructions or procedures.
13 Warning and Notice iii. End users’ mishandling, misuse, negligence, or improper installation, disassembly, storage, servicing or operation of the product. iv. Modifications or repairs not provided by ZTE or a ZTE-certified individual. v. Power failures, surges, fire, flood, accidents, and actions of third parties or other events outside ZTE’s reasonable control. vi. Usage of third-party products or usage in conjunction with third-party products if such defects are due to the combined usage. vii. Any other cause beyond the range of normal usage intended for the product. End users have no right to reject or return the product, or receive a refund for the product from ZTE under the above-mentioned situations. This warranty is end users’ sole remedy and ZTE’s sole liability for defective or nonconforming items, and is in lieu of all other warranties, expressed, implied or statutory, including but not limited to the implied warranties of merchantability and fitness for a particular purpose, unless otherwise required under the mandatory provisions of the law. Limitation of Liability ZTE shall not be liable for any loss of profits or indirect, special, incidental or consequential damages resulting from or arising out of or in connection with using of this product, no matter whether or not ZTE had been advised, knew or should have known of the possibility of such damages, including, but not limited to lost profits, interruption of business, cost of capital, cost of substitute facilities or product, or any downtime cost. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful
14 interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Body Operation This device was tested for typical body support operations. To comply with RF exposure requirements, a minimum separation distance of 1.0 cm must be maintained between the user’s body and the device, including the antenna. Third-party belt-clips, holsters, and similar accessories used by
15 this device should not contain any metallic components. Body accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna. LEGAL INFORMATION Copyright © 2015 ZTE CORPORATION. All rights reserved. No part of this publication may be excerpted, reproduced, translated or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE Corporation. The manual is published by ZTE Corporation. We reserve the right to make modifications on print errors or update specifications without prior notice. Version No.: R1.0 Edition Time: May 13, 2015 Manual No.:
16 Troubleshooting Problem Recommended Action The connection between your device and a PC through a USB cable cannot be established.  Install the software, and run the installation program in the path of My Computer.  If the driver of your device is abnormal, reinstall the software. You need to uninstall the software first. The connection between your device and a client through Wi-Fi cannot be established.  Ensure that the Wi-Fi function is enabled.  Refresh the network list and select the correct SSID.  Check the IP address, and ensure that your client can automatically obtain an IP address.  Enter the correct network key (Wi-Fi password) when you connect the client to your device.
17 Troubleshooting Problem Recommended Action The client connected to the device cannot access the Internet.  Ensure that your (U)SIM card is available. Change the location and find a place with good signal.  Check the settings of the WAN connection mode.  Contact your service provider and confirm your APN settings. The client cannot access the Internet in Internet Wi-Fi mode.  Ensure that the WLAN device has already been connected to the Internet.  Ensure that your device and the WLAN device are in different subnets. The 4G Mobile Hotspot configuration page cannot be visited.  Enter the correct address. The default address is http://192.168.0.1 or http://ufi.ztedevice.com.  Use only one network adapter in your PC. Do not use any proxy server.

Navigation menu