ZTE MF920VS LTE Ufi User Manual

ZTE Corporation LTE Ufi

User manual

PRODUCT SAFETY INFO &
LIMITED WARRANTY
IMPORTANT SAFETY INFORMATION
THIS BOOKLET CONTAINS IMPORTANT OPERATIONAL AND SAFETY
INFORMATION THAT WILL HELP YOU SAFELY USE YOUR DEVICE. FAILURE TO
READ AND FOLLOW THE INFORMATION PROVIDED IN THIS BOOKLET MAY
RESULT IN SERIOUS BODILY INJURY, DEATH, OR PROPERTY DAMAGE.
GENERAL PRECAUTIONS
There are several simple guidelines to operating your device properly and maintaining
safe, satisfactory service.
Do not touch the antenna area. Otherwise the performance of the device may be
affected.
Avoid exposing your device and accessories to rain or liquid spills. If your
device does get wet, immediately turn the power off.
Do not expose your device to direct sunlight for extended periods of time (such
as on the dashboard of a car).
The device is not waterproof. Keep the device dry and store it in a shady and cool
place.
Although your device is quite sturdy, it is a complex piece of equipment and can be
broken. Avoid dropping, hitting, bending, or sitting on it.
Any changes or modifications to your device not expressly approved in this
document could void your warranty for this equipment and void your authority to
operate this equipment.
For the best care of your device, only authorized personnel should
service your device and accessories. Failure to do so may be dangerous
and void your warranty.
MAINTAINING SAFE USE OF AND ACCESS TO
YOUR DEVICE
Using Your Hospot While Driving
Using your device while driving is prohibited in some jurisdictions. Laws vary as to
specific restrictions. Remember that safety always comes first.
Following Safety Guidelines
To operate your hotspot safely and efficiently, always follow any special regulations
in a given area. Turn your hotspot off in areas where use is forbidden or when it may
cause interference or danger.
Using Your Device Near Other Electronic Devices
Most modern electronic equipment is shielded from radio frequency (RF) signals.
However, RF signals from wireless device may affect inadequately shielded
electronic equipment. RF signals may affect improperly installed or inadequately
shielded electronic operating systems or entertainment systems in motor vehicles.
Check with the manufacturer or their representative to determine if these systems
are adequately shielded from external RF signals. Also check with the manufacturer
regarding any equipment that has been added to your vehicle. Consult the
manufacturer of any personal medical devices, such as pacemakers and hearing
aids, to determine if they are adequately shielded from external RF signals.
Always turn off the hotspot in healthcare facilities, and request permission
before using the hotspot near medical equipment.
Turning Off Your Device Before Flying
Turn off your device before boarding any aircraft. To prevent possible interference
with aircraft systems, the U.S. Federal Aviation Administration (FAA) regulations
require you to have permission from a crew member to use your device while the
plane is on the ground. To prevent any risk of interference, FCC regulations prohibit
using your device while the plane is in the air.
Turning Off Your Device in Dangerous Areas
To avoid interfering with blasting operations, turn your device off when in a blasting
area or in other areas with signs indicating two-way radios should be turned off.
Construction crews often use remote-control RF devices to set off explosives. Turn
your phone off when you’re in any area that has a potentially explosive atmosphere.
Although it’s rare, your phone and accessories could generate sparks. Sparks can
cause an explosion or fire, resulting in bodily injury or even death. These areas are
often, but not always, clearly marked. They include:
Fueling areas such as gas stations.
Below deck on boats.
Fuel or chemical transfer or storage facilities.
Areas where the air contains chemicals or particles such as grain, dust, or metal
powders.
Any other area where you would normally be advised to turn off your vehicle’s
engine.
Never transport or store flammable gas, flammable liquids, or explosives in the
compartment of your vehicle that contains your device or accessories.
Restricting Children’s Access to Your Device
Your device is not a toy. Do not allow children to play with it as they could hurt
themselves and others, damage the device.
CARING FOR THE BATTERY
Protecting Your Battery
The guidelines listed below help you get the most out of your battery's performance.
Do not change the built-in rechargeable battery in your device by yourself.
Use only Boost-approved or manufacturer-approved batteries and accessories
found at boostmobile.com or through your device's manufacturer. Buying the
right batteries and accessories is the best way to ensure they're genuine and
safe.
In order to avoid damage, charge the battery only in temperatures that range
from 32
o
F to 113
o
F (0
o
C to 45
o
C).
Don't use the battery charger in direct sunlight or in high humidity areas, such as
the bathroom.
Never dispose of the battery by incineration.
The battery may need recharging if it has not been used for a long period of
time.
Disposal of Lithium Ion (Li-Ion) Batteries
Do not handle a damaged or leaking Li-Ion battery as you can be burned. For safe
disposal options of your
Li-Ion batteries, contact your nearest authorized
service center.
Be sure to dispose of your battery properly. In some areas, the disposal of batteries
in household or business trash may be prohibited.
CTIA Requirements
Do not disassemble or open, crush, bend or deform, puncture or shred.
Do not modify or remanufacture, attempt to insert foreign objects into the
battery, immerse or expose to water or other liquids, expose to fire, explosion
or other hazard.
Only use the battery for the system for which it
is specified.
Only use the battery with a charging system that has been qualified with the
system per CTIA Certification Requirements for Battery System Compliance to
IEEE 1725. Use of an unqualified battery or charger may present a risk of fire,
explosion, leakage, or other hazard.
Do not short circuit a battery or allow metallic conductive objects to contact
battery terminals.
Replace the battery only with another battery that has been qualified with the
system per this standard, IEEE-Std-1725. Use of an unqualified battery may
present a risk of fire, explosion, leakage or other hazard.
Promptly dispose of used batteries in accordance with local regulations.
Battery usage by children should be supervised.
Avoid dropping the phone or battery. If the phone or battery is dropped,
especially on a hard surface, and the user suspects damage, take it to a
service center for inspection.
Improper battery use may result in a fire, explosion or other hazard.
The device shall only be connected to CTIA certified adapters, products that
bear the USB-IF logo or products that have completed the USB-IF compliance
program.
RADIO FREQUENCY (RF) ENERGY
FCC RF Exposure Information (SAR)
This device is designed and manufactured not to exceed the emission limits for
exposure to radio frequency (RF) energy set by the Federal Communications
Commission of the United States.
During SAR testing, this device is set to transmit at its highest certified power level in
all tested frequency bands, and placed in positions that simulate RF exposure in
usage against the head with no separation, and near the body with the separation of
10 mm. Although the SAR is determined at the highest certified power level, the
actual SAR level of the device while operating can be well below the maximum value.
This is because the device is designed to operate at multiple power levels so as to
use only the power required to reach the network. In general, the closer you are to a
wireless base station antenna, the lower the power output.
The exposure standard for wireless devices employs a unit of measurement known
as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg.
Tests for SAR are conducted using standard operating positions accepted by the
FCC with the device transmitting at its highest certified power level in all tested
frequency bands.
The FCC has granted an Equipment Authorization for this model device with all
reported SAR levels evaluated as in compliance with the FCC RF exposure
guidelines. SAR information on this model device is on file with the FCC and can be
found under the Display Grant section of www.fcc.gov/oet/ea/fccid after searching on
FCC ID: SRQ-MF920VS.
For this device, the highest reported SAR value for usage near the body is 1.21
W/kg.
While there may be differences between the SAR levels of various devices and at
various positions, they all meet the government requirement.
SAR compliance for body operation is based on a separation distance of 10 mm
between the unit and the human body. Carry this device, at least 10 mm away from
your body to ensure RF exposure level compliant or lower to the reported level. To
support body operation, choose the belt clips or holsters that do not contain metallic
components to maintain a separation of 10 mm between this device and your body.
FCC Notice
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that
may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
MANUFACTURER'S WARRANTY
YOUR DEVICE HAS BEEN DESIGNED TO PROVIDE YOU WITH RELIABLE,
WORRY-FREE SERVICE. IF FOR ANY REASON YOU HAVE A PROBLEM WITH
YOUR EQUIPMENT, PLEASE REFER TO THE MANUFACTURER’S WARRANTY
IN THIS SECTION.
ZTE (“Seller”) offers you a limited warranty that the enclosed product or products (the
“Product”) will be free from defects in material and workmanship for a period that
expires one year from the date of sale of the Product to you, provided that you are
the original end-user purchaser of the Product and provided that your purchase was
made from a supplier authorized by the Seller. Transfer or resale of a Product will
automatically terminate warranty coverage with respect to that Product. This limited
warranty is not transferable to any third party, including but not limited to any
subsequent purchaser or owner of the Product. This limited warranty is applicable to
end users in the United States and Puerto Rico.
Seller will, at its sole and absolute discretion, either repair or replace a Product (which
unit may use refurbished parts of similar quality and functionality) if found by Seller to
be defective in material or workmanship, or if Seller determines that it is unable to
repair or replace such Product, Seller will refund the purchase price for such Product,
provided that the subject Product (i) is returned to a Seller authorized service center
within the one year warranty period, and (ii) is accompanied by a proof of purchase in
the form of a bill of sale or receipted invoice which evidences that the subject Product
is within the one year warranty period. After the one year warranty period, you must
pay all shipping, parts and labor charges. In the event that the product is deemed
un-repairable or has been removed from the list of products supported by the Seller,
you will only be liable for shipping and labor charges.
This limited warranty does not cover and is void with respect to the following: (i) any
Product which has been improperly installed, repaired, maintained or modified; (ii)
any Product which has been subjected to misuse (including any Product used in
conjunction with hardware electrically or mechanically incompatible or used with
accessories not approved by Seller), abuse, accident, physical damage, abnormal
operation, improper handling, neglect, exposure to fire or liquid; (iii) any Product
operated outside published maximum ratings; (iv) cosmetic damage; (v) any Product
on which warranty stickers or Product serial numbers have been removed, altered, or
rendered illegible; (vi) cost of installation, removal or reinstallation; (vii) signal
reception problems (unless caused by defects in material and workmanship); (viii)
damage the result of fire, flood, acts of God or other acts which are not the fault of
Seller and which the Product is not specified to tolerate, including damage caused by
mishandling, shipping and blown fuses; (ix) consumables (such as fuses); or (x) any
Product which has been opened, repaired, modified or altered by anyone other than
Seller or a Seller authorized service center.
USE ONLY SELLER APPROVED ACCESSORIES WITH SELLER DEVICES. USE OF
ANY UNAUTHORIZED ACCESSORIES MAY BE DANGEROUS AND WILL
INVALIDATE THE DEVICE WARRANTY IF SAID ACCESSORIES CAUSE DAMAGE
OR A DEFECT TO THE DEVICE.
SELLER SPECIFICALLY DISCLAIMS LIABILITY FOR ANY AND ALL DIRECT,
INDIRECT, SPECIAL, GENERAL, PUNITIVE, EXEMPLARY, AGGRAVATED,
INCIDENTAL OR CONSEQUENTIAL DAMAGES, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES, WHETHER FORESEEABLE OR
UNFORESEEABLE OF ANY KIND WHATSOEVER, INCLUDING BUT NOT
LIMITED TO LOSS OF PROFITS, UNANTICIPATED BENEFITS OR REVENUE,
ANTICIPATED PROFITS ARISING OUT OF USE OF OR INABILITY TO USE ANY
PRODUCT (FOR EXAMPLE, WASTED AIRTIME CHARGES DUE TO THE
MALFUNCTION OF A PRODUCT) OR CONTRIBUTION OR INDEMNITY IN
RESPECT OF ANY CLAIM RELATED TO A PRODUCT.
REPAIR OR REPLACEMENT OF A DEFECTIVE PRODUCT OR REFUND OF THE
PURCHASE PRICE RELATING TO A DEFECTIVE PRODUCT, AS PROVIDED
UNDER THIS WARRANTY, ARE YOUR SOLE AND EXCLUSIVE REMEDIES FOR
BREACH OF THE LIMITED WARRANTY, AND SUBJECT TO THIS WARRANTY,
THE PRODUCTS ARE APPROVED AND ACCEPTED BY YOU “AS IS”. SELLER
MAKES NO OTHER WARRANTIES, REPRESENTATIONS OR CONDITIONS OF
ANY KIND, ORAL OR WRITTEN, EXPRESS OR IMPLIED, STATUTORY OR
OTHERWISE, WITH RESPECT TO THE PRODUCTS, INCLUDING BUT NOT
LIMITED TO ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE OR AGAINST INFRINGEMENT OR
ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF TRADE USAGE OR
OUT OF A COURSE OF DEALING OR COURSE OF PERFORMANCE. NO DEALER,
DISTRIBUTOR, AGENT OR EMPLOYEE IS AUTHORIZED TO MAKE ANY
MODIFICATION OR ADDITION TO THIS WARRANTY.
Some jurisdictions do not allow the exclusion or limitation of incidental or
consequential damages, or allow limitations on how long an implied warranty lasts,
so the above limitations or exclusions may not apply to you. This limited warranty
gives you specific legal rights, and you may also have other rights which vary from
jurisdiction to jurisdiction. For warranty service information, please call the following
telephone number: 1-877-817-1759, 1-212-444-0502 or return to the point of sale for
the products. The retailer can return the units to ZTE authorized service center in US
for repair service.
Please provide warranty information (proof of purchase) to ZTE in order to
receive warranty service at no charge. If the warranty has expired on the
device, charges may apply.

Navigation menu