ZTE R230 Vodafone Mobile WiFi User Manual MF980 quick start guide V1 0

Download:
Mirror Download [FCC.gov]
Document ID	3176693
Application ID	kspT+0yVyIh9v/EQ/ty6Cg==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	29.47kB (368342 bits)
Date Submitted	2016-10-27 00:00:00
Date Available	2016-11-01 00:00:00
Creation Date	2016-10-26 17:36:44
Producing Software	Acrobat Distiller 10.1.0 (Windows)
Document Lastmod	2016-10-26 17:36:44
Document Title	Microsoft Word - MF980 quick start guide V1.0
Document Creator	PScript5.dll Version 5.2.2
Document Author:	ls

MF980
Quick Start Guide
ZTE CORPORATION
ZTE Plaza, Keji Road South, Shenzhen, China
Getting to
t Know You
ur Device
Appearanc
ce
The following fiigure is for your referrence only.
1. micro-SIM ca
ard slot
2. Charging/US
SB 3.0 jack
3. External ante
enna interface
4. LCD screen
5. FUNC key
6. Power key
Press and hold
for about 3 se
econds to power on/off your
device.
7. Reset hole
Getting to
t Know You
ur Device
Indicators
When the devvice is powered on, the following icons may be
displayed on the LCD screen. For a description of th
he icons,
refer to the follo
owing table.
Icon
Description
Network signal stren
ngth
Network type
The user is in roaming status.
Connected to the Internet.
Connected to the Internet in the Intern
net Wi-Fi
mode.
New message (s)
Wi-Fi status and the
e number of connecte
ed users
Battery level
Getting to
t Know You
ur Device
Connection Scenarios
The device can access the Interne
et in two ways and it allows
ernet at the same time. The
multiple clientss to surf on the Inte
following figure
es are for your referen
nce only.
 4G
Mode: A micro-SIM card can
be used to acccess the
Internet.
 Internet
Wi-Fi Mode: Your devvice can be conneccted to a
WLAN devicce (such as a hotspot device or wireless router)
through Wi-F
Fi to access the Interrnet. The WLAN devvice must
be already connected
to the Internet.
NOTE:
be in different subnets.
Your device and the WLAN device must
The device no
ot support LTE nettwork at US. Only support
GSM850/1900,, WCDMA Band 2&5 WWAN network
Installing
g Your Devic
ce
1. Open the micro-SIM card slot covver.
NOTE:
Do not remove
e the cover crudely, because
it is conneccted with
the device.
2. Install a micrro-SIM card to the micro-SIM card slot.
WARNING
G!
To avoid damag
ge to the device, do not
n use any other kin
nd of SIM
cards, or any non-standard micro-S
SIM card cut from a SIM
S card.
SIM card from yourr service
You can get a standard micro-S
provider.
card slot cover.
3. Close the micro-SIM
Connectting to Your Device
Using Wi-F
Fi
1. Power on yo
our device.
2. Ensure thatt your computer orr other client devices have
enabled Wi-Fi, and search for avvailable wireless netw
works.
NOTE: Refer to your Wi-Fi-ena
abled client device ma
anual for
o how to search for wireless networks. Iff you use
further details on
a computer, yo
ou need to set you
ur computer to obtain an IP
address automatically.
click
3. Select the Wi-Fi name (SSID)) of your device, and
Connect.
4. Enter the Wii-Fi password if nece
essary, and click OK.
NOTE: Reffer to the chapter Getting
to Know th
he Wi-Fi
SSID and Pa
assword to get the default Wi-Fi SS
SID and
password.
5. Wait until the client device is connected to your device
successfully.
Using a US
SB Cable
1. Connect a co
omputer to your deviice with a USB cable
e.
2. Power on your
device. The op
perating system dete
ects and
identifies ne
ew hardware, and automatically insttalls the
software.
NOTE:
If the system does not automaticallyy launch installation, you can
double-click th
he device installation icon in My Com
mputer >
ZTEMODEM to
o install the software..
3. Wait until the computer is connected to yourr device
successfully.
Getting to
t Know the
e Wi-Fi SSID
D and
Passworrd
You can use the following methods to get the default Wii-Fi SSID
and password.


View th
he label on the device
e.
Press the
t FUNC key to access the options menu. Select
Device
e Info, and then the Wi-Fi
SSID and passw
word are
displayyed on the screen.
Logging
in
to
th
he
4G
Mobile
Hotspot Configuration Page
1. Ensure that the connection between your device and the
e is correct.
client device
2. Launch the Internet browser and
d enter http://192.16
68.0.1 in
the address bar.
ord to log in to the 4G
G Mobile
3. Enter the ussername and passwo
Hotspot conffiguration page.
NOTE: The
e default username and
a password are ad
dmin.
Changing
the
Wi-Fi
SSID
or
Password
1. Log in to the 4G Mobile Hotspot configuration page.
2. Select Wi-Fi Settings > Main SSID.
3. Change the Network Name (SSID) or the Password in the
Main SSID area.
4. Click Apply.
Accessing the Internet
4G Mode
After a client device is successfully connected to your device,
you can access the Internet in Automatic or Manual mode. The
default mode is Automatic.
Mode
Operation
Automatic
Your device is automatically connected to the
Internet, and you can surf on the Internet
through the client.
Manual
1. Log
in
to
the
4G
Mobile
Hotspot
configuration page.
2. Select Settings > Connection Mode >
Manual, and then click Apply.
3. Click
click
to back to the home pa
age, and
or
o press the FUNC key and
You can also
select Data Connection.
Selectt Yes or
No.
NOTE:
of your de
evice, log in to the 4G
G Mobile
To modify the parameters
Hotspot configu
uration page.
Internet Wi-Fi Mode
1. Log in to the
e 4G Mobile Hotspot configuration page.
2. Select Wi-Fii Settings > Internett Wi-Fi.
3. Set the Inte
ernet Wi-Fi Switch to Enable, and clickk Apply.
Then set the
e Preferred Network
k to Wi-Fi, and click Apply.
4. Connect to the Wi-Fi hotspot.
The following tw
wo methods are for your
reference.
 Click Con
nnect next to the Wi-Fi hotspot you want to
connect to
o in the Wi-Fi Hotspot area, enter a passsword in
the Passw
word text box and clicck Yes.
10
Accessing the Internet
 Click Add Network, enter the Wi-Fi hotspot information in
the Add Wi-Fi Hotspot area, and click Apply.
After the client device is connected to the Wi-Fi hotspot
successfully, you can access the Internet.
Using the FUNC Key

When the screen is off:
Press the FUNC Key to turn on the screen.

When the screen is on:
Press the FUNC Key to access the options menu. You
can connect or disconnect with the Internet, view device
information or Wi-Fi QR code, activate WPS function,
and enable/disable global roaming or quick boot function
without
logging
in
to
Configuration Page.
11
the
4G
Mobile
Hotspot
Configuring Your PC
The following procedure describes how to configure the Internet
Protocol in Windows 7 for your Wi-Fi connection.
1. Right-click Network and select Properties.
2. Select Change adapter settings.
3. Right-click Wireless Network Connection and select
Properties.
4. Select Internet Protocol Version 4 (TCP/IPv4), and click
Properties.
5. Select Obtain an IP address automatically and Obtain
DNS server address automatically, and click OK.
12
Warning and Notice
To the Users
•
•
•
•
•
•
•
If inadequately shielded, some electronic devices, for example, the
electronic system of vehicles, may be affected by the
electromagnetic interference caused by the device. Consult the
manufacturers of such devices before using the device if
necessary.
Operating the device may interfere with medical instruments such
as hearing aids and pacemakers. Always keep the device more
than 20 centimeters away from such medical instruments when
your device is powered on. Power off the device if necessary.
Consult a physician or the manufacturers of medical instruments
before using the device if necessary.
Be aware of the usage limitation when using the device at places
such as oil warehouses or chemical factories, where there are
explosive gases or explosive products being processed. Power off
the device if necessary.
Do not use electronic transmission devices in aircrafts, at petrol
stations or in hospitals. Observe and obey all warning signs, and
power off the device in these conditions.
Do not touch the inner antenna area unless necessary. Otherwise
the performance of the device may be affected.
Do not use the device in an enclosed environment or where heat
dissipation is poor. Prolonged work in such space may cause
excessive heat and raise ambient temperature, which may lead to
automatic shutdown of the device for your safety. In the case of
such event, cool the device in a well-ventilated place before turning
on for normal use.
Keep the device out of the reach of small children. The device may
cause an injury if used as a toy.
13
•
•
•
•
•
•
•
•
When the device is operating, do not touch the metallic parts.
Failing to do so may cause burns.
Use original accessories or accessories that are authorized. Using
any unauthorized accessories may affect the performance of the
device and violate the related national regulations about telecom
terminals.
Avoid using the device near or inside metallic constructions or
establishments that can emit electromagnetic waves, because
signal reception may be affected.
The device is not waterproof. Keep the device dry and store it in a
shady and cool place.
Do not use the device immediately after a sudden temperature
change, because dew may be generated inside and outside the
device. Do not use it until it becomes dry.
Handle the device carefully. Do not drop, bend or strike it.
Otherwise the device may be damaged.
Only qualified personnel can dismantle and repair the device.
An operating temperature between -10°C and +55°C and humidity
between 5% and 95% are recommended.
Using Battery
Do not change the built-in rechargeable battery in your device by
yourself. The battery can only be changed by ZTE or ZTE authorized
service provider.
Limited Warranty
This warranty does not apply to defects or errors in the product
caused by:
i. Reasonable abrasion.
ii. End users’ failure to follow ZTE’s installation, operation or
maintenance instructions or procedures.
iii. End users’ mishandling, misuse, negligence, or improper
14
installation, disassembly, storage, servicing or operation of the
product.
iv. Modifications or repairs not provided by ZTE or a ZTE-certified
individual.
v. Power failures, surges, fire, flood, accidents, and actions of third
parties or other events outside ZTE’s reasonable control.
vi. Usage of third-party products or usage in conjunction with
third-party products if such defects are due to the combined
usage.
vii. Any other cause beyond the range of normal usage intended for
the product.
End users have no right to reject or return the product, or receive a
refund for the product from ZTE under the above-mentioned
situations.
This warranty is end users’ sole remedy and ZTE’s sole liability for
defective or nonconforming items, and is in lieu of all other warranties,
expressed, implied or statutory, including but not limited to the implied
warranties of merchantability and fitness for a particular purpose,
unless otherwise required under the mandatory provisions of the law.
Limitation of Liability
ZTE shall not be liable for any loss of profits or indirect, special,
incidental or consequential damages resulting from or arising out of or
in connection with using of this product, no matter whether or not ZTE
had been advised, knew or should have known of the possibility of
such damages, including, but not limited to lost profits, interruption of
business, cost of capital, cost of substitute facilities or product, or any
downtime cost.
FCC Caution:
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
15
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Any Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate
the equipment.
16
Body Operation
This device was tested for typical body support operations. To comply
with RF exposure requirements, a minimum separation distance of 1.0
cm must be maintained between the user’s body and the device,
including the antenna. Third-party belt-clips, holsters, and similar
accessories used by this device should not contain any metallic
components. Body accessories that do not meet these requirements
may not comply with RF exposure requirements and should be
avoided. Use only the supplied or an approved antenna.
LEGAL INFORMATION
Copyright © 2016 ZTE CORPORATION.
All rights reserved.
No part of this publication may be excerpted, reproduced, translated
or utilized in any form or by any means, electronic or mechanical,
including photocopying and microfilm, without the prior written
permission of ZTE Corporation.
The manual is published by ZTE Corporation. We reserve the right to
make modifications on print errors or update specifications without
prior notice.
Version No.: R1.0
Edition Time: June 24, 2016
Manual No.:
17
Troubleshooting
Problem
Recommended Action
The

connection
Install the software, and run the
installation program in the path of My
between your
device and a
Computer.

If the driver of your device is
PC through a
abnormal, reinstall the software. You
USB
need to uninstall the software first.
cable
cannot
be
established.

The
connection
between your

device and a
client through
Wi-Fi
Refresh the network list and select
the correct SSID.

cannot
Check the IP address, and ensure
that your client can automatically
be
established.
Ensure that the Wi-Fi function is
enabled.
obtain an IP address.

Enter the correct network key (Wi-Fi
password) when you connect the
client to your device.
18
Troubleshooting
Problem
The
Recommended Action
client

connected to
the
device

cannot access
the Internet.
Ensure that your micro-SIM card is
available.
Change the location and find a place
with good signal.

Check the settings of the WAN
connection mode.

Contact your service provider and
confirm your APN settings.
The
4G

Mobile
Hotspot

configuration
page
Enter the correct address. The
default address is http://192.168.0.1.
cannot
Use only one network adapter in
your PC.

Do not use any proxy server.
be visited.
Getting More Help
You can get help by:

Sending an email to mobile@zte.com.cn

Visiting www.ztedevice.com
19

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : ls
Create Date                     : 2016:10:26 17:36:44+08:00
Modify Date                     : 2016:10:26 17:36:44+08:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Creator Tool                    : PScript5.dll Version 5.2.2
Format                          : application/pdf
Title                           : Microsoft Word - MF980 quick start guide V1.0
Creator                         : ls
Producer                        : Acrobat Distiller 10.1.0 (Windows)
Document ID                     : uuid:3cb3d887-9c6c-4dd0-a416-6e038ded50a0
Instance ID                     : uuid:732469e5-2ce4-4975-9c37-c6420ba53490
Page Count                      : 19

EXIF Metadata provided by EXIF.tools