Contents
- 1. Users Manual
- 2. User manual
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3315489 |
| Application ID | +R8hutXp6AtJet4A/DH5Og== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 301.92kB (3773984 bits) |
| Date Submitted | 2017-03-14 00:00:00 |
| Date Available | 2017-09-11 00:00:00 |
| Creation Date | 2017-03-07 17:48:07 |
| Producing Software | GPL Ghostscript 9.10 |
| Document Lastmod | 2017-03-07 17:48:07 |
| Document Title | User manual |
| Document Creator | PDFCreator Version 1.7.3 |
| Document Author: | amqian |
R800 INDUSTRIAL LTE ROUTER QUICK START GUIDE Website: www.ztewelink.com E-mail: ztewelink@zte.com.cn R800 Quick Start Guide LEGAL INFORMATION By receiving the document from Shenzhen ZTEWelink Technology Co., Ltd (shortly referred to as ZTEWelink), you are deemed to have agreed to the following terms. If you don’t agree to the following terms, please stop using the document. Copyright © 2016 Shenzhen ZTEWelink Technology Co., Ltd. All rights reserved. The document contains ZTEWelink’s proprietary information. Without the prior written permission of ZTEWelink, no entity or individual is allowed to reproduce, transfer, distribute, use and disclose this document or any image, table, data or other information contained in this document. ZTEWelink is a holding subsidiary of ZTE Corporation, dedicate to cellular M2M communication modules and M2M solutions. is the registered trademark of ZTE Corporation and ZTEWelink is granted to use ZTE Corporation’s registered trademarks. The name and logo of ZTEWelink are ZTEWElink’s trademark or registered trademarks. The other products or company names mentioned in this document are the trademark or registered trademark of their respective owner. Without the prior written permission of ZTEWelink or the third-party oblige, no entity or individual is allowed to use any company name, trademark, logo, label or other information contained in this document. The product meets the design requirements of environmental protection and personal security. The storage, use or disposal of products should abide by the product manual, relevant contract or the laws and regulations of relevant country. ZTEWelink reserves the right to make modifications on the product described in this document without prior notice, and keeps the right to revise or retrieve the document any time. If you have any question about the manual, please consult the company or its distributors promptly. Copyright © ZTEWeLink Technology Co., LTD, All rights reserved. APPLICATION RANGE Industrial Wireless Router R800 All Rights reserved, No Spreading abroad without Permission R800 Quick Start Guide REVISION HISTORY VERSION DATE DESCRIPTION V1.0 2016-08-10 First release ABOUT THIS DOCUMENT Reading Note The symbols below are the reading notes you should pay attention on: : Warning or Attention : Note or Remark NOTE: Consult our website for up-to-date product descriptions, documentation, application notes, firmware upgrades, troubleshooting tips, and press releases CONTACT INFORMATION 9/F, Tower A, Hans Innovation Mansion, Post North Ring Rd., No.9018, Hi-Tech Industrial Park, Nanshan District, Shenzhen. Web www.ztewelink.com Phone +86-755-26902600 E-Mail ztewelink@zte.com.cn Note: Consult our website for up-to-date product descriptions, documentation, application notes, firmware upgrades, troubleshooting tips, and press releases Besides, ZTEWelink provides various technical support ways to the customers, such as support by phone, website, instant messaging, E-mail and on-site. All Rights reserved, No Spreading abroad without Permission R800 Quick Start Guide CONTENTS 1. PRODUCT INTRODUCTION.................................................................................................................................................... 5 2. PACKING LIST ...................................................................................................................................................................... 5 3. BEFORE INSTALLATION......................................................................................................................................................... 6 3.1. R800 PRODUCT EXTERIOR VIEW ..................................................................................................................................................................... 6 3.2. INDICATOR LIGHT DESCRIPTION........................................................................................................................................................................ 6 3.3. PC CONNECTION ........................................................................................................................................................................................... 7 4. COMPUTER CONFIG (WINDOWS OS) ..................................................................................................................................... 7 5. ROUTER PARAMETER CONFIG .............................................................................................................................................. 9 5.1. BRIEF INTRODUCTION ..................................................................................................................................................................................... 9 6. ROUTER SYSLOG ILLUSTRATION .......................................................................................................................................... 12 7. FEDERAL COMMUNICATION COMMISSION INTERFERENCE STATEMENT ................................................................................ 14 8. INDUSTRY CANADA STATEMENT......................................................................................................................................... 15 All Rights reserved, No Spreading abroad without Permission R800 Quick Start Guide 1. PRODUCT I NTRODUCTION R800 3G/4G LTE IoT industrial wireless communication router takes the advantage of public 4G network to provide data transmission through long distance. The product uses high-performance 32-bit industrial grade communications processor and industrial grade wireless module, Software platform is an embedded real-time operating system,While providing an RS232 interface,2 Ethernet LAN (one of which can be configured as WAN),At the same time,connect a serial port and Ethernet equipment,implement the data transparent transmission and routing functions. The product has been widely used in the networking industry chain in the M2M industry,Such as smart grid,smart transportation,smart home,finance,mobile POS terminals,supply chain automation,industrial automation,intelligent building,fire, public safety,environmental protection,meteorology,digital medical,telemetry,space exploration,agriculture,forestry,water,coal, petrochemical and other fields. 2. PACKING LIST Please kindly check the packing list, if there are omissions, please contact the dealer. Name of Accessory Quantity Remark R800 LTE Router Main Machine Packed as per customer order configurations WLAN Antenna(The cable length is 1m) 1 piece Packed as per customer order configurations 3G/4G Antenna 2 pieces Packed as per customer order configurations RJ45 Cable 1 piece Packed as per customer order configurations Installation Hardware 1 pair Packed as per customer order configurations Quick Start Guide Packed as per customer order configurations 12VDC Power Adapter Packed as per customer order configurations All Rights reserved, No Spreading abroad without Permission R800 Quick Start Guide 3. BEFORE INSTALLATION 3.1. R800 P RODUCT E XTERIOR V IEW Figure 3-1 3.2. I NDICATOR L IGHT D ESCRIPTION Table 3-2 Indicator Light PWR SYS PPP VPN Status Description ON Power ON OFF Power OFF Flash Temperature anomalies ON System operating normally OFF Abnormal system operation Flash Temperature anomalies ON Network connection OFF No dial Fast Flash Dialing Slow Flash Allocated on a non-4G network ON Any VPN turned on All Rights reserved, No Spreading abroad without Permission R800 Quick Start Guide SIG BAK OFF Disconnect Flash Connecting ON 21～31 Slow Flash 11～20 Fast Flash 1～10 OFF No service ON WAN as the primary link, and lte work Flash Exception, none of access OFF WAN works, LTE not working 3.3. PC C ONNECTION Figure 3-2 PC Connection NOTE (Back of the device): Router antenna interface is SMA female socket. The matching antenna SMA male antenna screwed to the router interface and ensure tightened so as not to affect the signal quality. Insert the SIM card holder the right of small yellow dots with spikes, SIM card sets to pop up. When installing the SIM card, the first SIM card into the card holder and ensure that the SIM card metal contacts facing down, and then insert the SIM card holder in the drawer and make sure it clicks into place. 4. COMPUTER C ONFIG (W INDOWS OS) Press “WINDOWS + X” to open the menu, select “Control panel”. Figure 4-1 Open “View network status and tasks”. All Rights reserved, No Spreading abroad without Permission R800 Quick Start Guide Figure 4-2 Open “Change adapter settings”, Figure 4-3 Open Ethernet Properties. Figure 4-4 Select the internet protocol version 4 (TCP / IPv4) and click Properties. Figure 4-5 Select the Obtain an IP address automatically and Obtain DNS server address automatically. All Rights reserved, No Spreading abroad without Permission R800 Quick Start Guide Figure 4-6 5. ROUTER PARAMETER CONFIG 5.1. B RIEF I NTRODUCTION Open the Chrome browser, enter 192.168.1.1 in the address bar to open the configuration screen and enter your password. User name: admin Password: admin Figure 5-1 Click on "English" to select English language . All Rights reserved, No Spreading abroad without Permission R800 Quick Start Guide Figure 5-2 Connected to the Internet, there are two ways, one is a mobile network, and the other is connected through the Ethernet WAN. Mobile Network: Open the Network configuration WWAN, Fill SIM card operator APN. Figure 5-3 Ethernet WAN: Open the "WAN" in the network configuration menu, in the "Connect Via" You can select the network mode. All Rights reserved, No Spreading abroad without Permission 10 R800 Quick Start Guide Figure 5-4 WLAN Configuration: Select "WLAN" option in the network configuration, turn on the wireless status, set SSID number and password. Figure 5-5 All Rights reserved, No Spreading abroad without Permission 11 R800 Quick Start Guide 6. ROUTER SYSLOG ILLUSTRATION System debugging: Select the "Debug" option in the "System" menu, after checking the syslogd click Refresh. Check the "syslogd" is all log information, check the "Show kernel log" is the only check kernel information, This part describes the router dial log and Ethernet interface activation log. Figure 6-1 Log WAN interface： All Rights reserved, No Spreading abroad without Permission 12 R800 Quick Start Guide Figure 6-2 Mobile Network Dial log： Wireless dial-up log is shown in Fig., The red box after successfully dialing line information. Figure 6-3 When the network is dropped, there will be detected www.baidu.com and ping www.yahoo.com timeout, this time re-dial. All Rights reserved, No Spreading abroad without Permission 13 R800 Quick Start Guide Figure 6-4 7. FEDERAL COMMUNICATION C OMMISSION INTERFERENCE STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. particular installation. However, there is no guarantee that interference will not occur in a If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: All Rights reserved, No Spreading abroad without Permission 14 R800 Quick Start Guide Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. FCC ID: SRQ-R800 8. INDUSTRY C ANADA STATEMENT This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: 1) this device may not cause interference, and 2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: 1) l'appareil ne doit pas produire de brouillage, et 2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. This device complies with RSS-310 of Industry Canada. Operation is subject to the condition that this device does not cause harmful interference. Cet appareil est conforme à la norme RSS-310 d'Industrie Canada. L'opération est soumise à la condition que cet appareil ne provoque aucune interférence nuisible. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter, except tested built-in radios. Cet appareil et son antenne ne doivent pas être situés ou fonctionner en conjonction avec une autre antenne ou un autre émetteur, exception faites des radios intégrées qui ont été testées. The County Code Selection feature is disabled for products marketed in the US/ Canada. La fonction de sélection de l'indicatif du pays est désactivée pour les produits commercialisés aux États-Unis et au Canada. Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Déclaration d'exposition aux radiations: Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. IC: 5200A-R800 All Rights reserved, No Spreading abroad without Permission 15
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Page Count : 15 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:b2c6aa61-0576-11e7-0000-5671481b4cfd Producer : GPL Ghostscript 9.10 Keywords : () Modify Date : 2017:03:07 17:48:07+08:00 Create Date : 2017:03:07 17:48:07+08:00 Creator Tool : PDFCreator Version 1.7.3 Document ID : uuid:b2c6aa61-0576-11e7-0000-5671481b4cfd Format : application/pdf Title : User manual Creator : amqian Description : () Author : amqian Subject :EXIF Metadata provided by EXIF.tools