ZTE VM6200 Automotive Multi-function MiFi Terminal User Manual

ZTE Corporation Automotive Multi-function MiFi Terminal Users Manual

Users Manual

Download: ZTE VM6200 Automotive Multi-function MiFi Terminal User Manual
Mirror Download [FCC.gov]ZTE VM6200 Automotive Multi-function MiFi Terminal User Manual
Document ID2669106
Application IDls0Zj8XQ5kyh8dOChOKuUw==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize3.04kB (38040 bits)
Date Submitted2015-07-07 00:00:00
Date Available2016-01-05 00:00:00
Creation Date2015-06-25 17:26:14
Producing SoftwareAdobe PDF Library 10.0.1
Document Lastmod2015-07-03 18:55:25
Document TitleUsers Manual
Document CreatorAdobe InDesign CS6 (Macintosh)

VM6200
Product Safety and
Warranty Information
ZTEUSA.COM
Table of Contents
Regulatory and Safety Information ..................................... 3
To the Owner...................................................................................... 3
Using Your Device............................................................................. 3
Radio Frequency (RF) Energy........................................................ 4
FCC Compliance................................................................................ 5
Warranty ................................................................................................. 6
Limited Warranty .............................................................................. 6
Limitation of Liability ...................................................................... 7
Copyright © 2015 ZTE CORPORATION.
All rights reserved.
No part of this publication may be quoted, reproduced,
translated or used in any form or by any means, electronic or
mechanical, including photocopying and microfilm, without
the prior written permission of ZTE Corporation.
Notice
ZTE Corporation reserves the right to make modifications
on print errors or update specifications in this guide without
prior notice.
Version No. : R1.0
Manual No. : 8090182200MT
Regulatory and Safety Information
To the Owner
• Operating your device may interfere with medical devices
such as hearing aids and pacemakers. Please always keep
them more than 8 inches (20 cm) away from such medical
devices when they are powered on. Stop using your device
if necessary. Consult a physician or the manufacturer of the
medical device before using your device.
• Be aware of the usage limitation when using your device at
places such as oil warehouses or chemical factories, where
there are explosive gases or explosive products being
processed. Stop using your device if required.
• The use of electronic transmitting devices is forbidden in
aircrafts, at gas stations, and in hospitals. Please observe
and obey all warning signs and stop using your device in
these conditions.
• Store your device out of the reach of little children.
Your device may cause injury if used as a toy.
• Do not touch the metallic parts of your device. Otherwise,
it will affect your device’s performance.
Using Your Device
• Please use original accessories or accessories that are
authorized. Using any unauthorized accessories may affect
your device’s performance and violate related national
regulations about telecom terminals.
• Avoid using your device near or inside metallic structures
or establishments that can emit electromagnetic waves.
Otherwise, it may influence signal reception.
• Your device is not waterproof. Please keep it dry and store it
in a shady and cool place.
• Do not use your device immediately after a sudden
temperature change, which will produce dew inside
and outside your device. Do not use the device until it
becomes dry.
• Handle your device carefully. Do not drop, bend, or strike it.
Otherwise, your device will be damaged.
• Do not allow non-professionals to dismantle the device.
Only qualified technicians can undertake repair work.
• An operating temperature range of -4°F ~ 158°F
(-20°C ~ +70°C) and humidity range of 5% ~ 95%
are recommended.
Radio Frequency (RF) Energy
This device meets the government’s requirements for
exposure to radio waves.
This device is designed and manufactured not to exceed the
emission limits for exposure to radio frequency (RF) energy
set by the Federal Communications Commission of the
U.S. Government:
FOR MOBILE DEVICE USAGE (>20 cm/low power)
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits
set forth for an uncontrolled environment. This equipment
should be installed and operated with a minimum distance of
20 cm between the radiator and your body.
FCC ID: SRQ-VM6200
FCC Compliance
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must
accept any interference received, including interference that
may cause undesired operation.
Caution: Changes or modifications not expressly approved
by the manufacturer could void the user’s authority to
operate the equipment. This transmitter must not be
co-located or operating in conjunction with any other
antenna or transmitter.
Note: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
Note: The country code selection is for non-U.S. models only
and is not available to all U.S. models. Per FCC regulation, all
Wi-Fi® products marketed in the U.S. must be fixed to U.S.
operation channels only.
Warranty
Limited Warranty
This warranty does not apply to defects or errors in the
Product caused by:
i.	Reasonable abrasion.
ii.	End User’s failure to follow ZTE’s installation, operation, or
maintenance instructions or procedures.
iii.	End User’s mishandling, misuse, negligence, or improper
installation, disassembly, storage, servicing, or operation
of the Product.
iv.	Modifications or repairs not made by ZTE or a ZTEcertified individual.
v.	Power failures, surges, fire, flood, accidents, actions of
third parties, or other events outside ZTE’s reasonable
control.
vi.	Usage of third-party products, or usage in conjunction
with third-party products, provided that such defects are
due to the combined usage.
vii.	Any other cause beyond the range of normal usage
intended for the Product.
End User shall have no right to reject or return the Product, or
receive a refund for the Product from ZTE, under the abovementioned situations.
This warranty is End User’s sole remedy and ZTE’s sole liability
for defective or nonconforming items, and is in lieu of all
other warranties, expressed, implied or statutory, including
but not limited to the implied warranties of merchantability
and fitness for a particular purpose, unless otherwise required
under the mandatory provisions of the law.
Limitation of Liability
ZTE shall not be liable for any loss of profits or indirect,
special, incidental or consequential damages resulting from
or arising out of or in connection with use of this product,
whether or not ZTE had been advised, knew or should have
known of the possibility of such damages, including, but not
limited to lost profits, interruption of business, cost of capital,
cost of substitute facilities or product, or any downtime cost.
8


Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract, Print high-res
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Create Date                     : 2015:06:25 17:26:14-04:00
Metadata Date                   : 2015:07:03 18:55:25+08:00
Modify Date                     : 2015:07:03 18:55:25+08:00
Creator Tool                    : Adobe InDesign CS6 (Macintosh)
Instance ID                     : uuid:3a7b3555-60f6-4e54-98cf-22b9a105bbb2
Original Document ID            : xmp.did:6890F3B114206811822ABA95F3EEF3D4
Document ID                     : xmp.id:A4CF11E13E2068118083E2BAC232F807
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:A3CF11E13E2068118083E2BAC232F807
Derived From Document ID        : xmp.did:80FA092C52206811808388AB7E2B94FB
Derived From Original Document ID: xmp.did:6890F3B114206811822ABA95F3EEF3D4
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CS6 (Macintosh)
History Changed                 : /
History When                    : 2015:06:25 17:26:14-04:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 10.0.1
Trapped                         : False
Page Count                      : 7
Creator                         : Adobe InDesign CS6 (Macintosh)
EXIF Metadata provided by EXIF.tools
FCC ID Filing: SRQ-VM6200

Navigation menu