ZTE WF723S CDMA Wireless Access Terminal User Manual

ZTE Corporation CDMA Wireless Access Terminal

User manual

Download: ZTE WF723S CDMA Wireless Access Terminal User Manual
Mirror Download [FCC.gov]ZTE WF723S CDMA Wireless Access Terminal User Manual
Document ID3303748
Application IDqdbbv//9lX0uP4yQALZ2AQ==
Document DescriptionUser manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize72.55kB (906819 bits)
Date Submitted2017-03-03 00:00:00
Date Available2017-08-30 00:00:00
Creation Date2017-03-02 14:28:02
Producing Software福昕风腾PDF套件打印机 版本 7.2.0.0424
Document Lastmod2017-03-02 14:28:19
Document TitleUser manual

Important Information
Safety Information – page 2
Warranty – page 8
Important Safety Information
This booklet contains important operational and
safety information that will help you safely use your
device. Failure to read and follow the information
provided in this booklet may result in serious bodily
injury, death, or property damage.
General Precautions
There are several simple guidelines to operating your
device properly and maintaining safe, satisfactory
service.
• To maximize performance, do not touch the bottom
portion of your device where the internal antenna is
located while using the device.
• Speak directly into the mouthpiece.
• Avoid exposing your device and accessories to rain
or liquid spills. If your device does get wet,
immediately turn the power off and remove the
battery.
• Do not expose your device to direct sunlight for
extended periods of time (such as on the dashboard
of a car).
• Although your device is quite sturdy, it is a complex
piece of equipment and can be broken. Avoid
dropping, hitting, bending, or sitting on it.
• Any changes or modifications to your device not
expressly approved in this document could void your
warranty for this equipment and void your authority to
operate this equipment.
Note: For the best care of your device, only authorized
personnel should service your device and accessories. Failure
to do so may be dangerous and void your warranty.
Maintaining Safe Use of and Access to
Your Device
Operating Machinery
Full attention must be given to operating the
machinery in order to reduce the risk of an accident.
Product Handling
You alone are responsible for how you use your
device and any consequences of its use.
• You must always switch off your device wherever
the use of such device is prohibited. Use of your
device is subject to safety measures designed to
protect users and their environment.
• Always treat your device and its accessories with
care and keep it in a clean and dust-free place.
• Do not expose your device or its accessories to
open flames or lit tobacco products.
• Do not expose your device or its accessories to
liquid, moisture or high humidity.
• Do not drop, throw or try to bend your device or its
accessories.
• Do not use harsh chemicals, cleaning solvents, or
aerosols to clean the device or its accessories.
• Do not paint your device or its accessories.
• Do not attempt to disassemble your device or its
accessories, only authorized personnel must do so.
• Charge your device within 0 degree Celsius and 50
degree Celsius, use your device within a temperature
range between -10 and +60 degree Celsius, Do not
expose your device or its accessory outside the range
of minimum –10 till maximum +60.
• Please check local regulations for disposal of
electronic products.
Small Children
• Do not leave your device and its accessories within
the reach of small children or allow them to play with
it.
•They could hurt themselves or others, or could
accidentally damage the device.
• Your device contains small parts with sharp edges
that may cause an injury or which could become
detached and create a choking hazard.
Demagnetization
To avoid the risk of demagnetization, do not allow
electronic devices or magnetic media close to your
device for a long time.
Power Supply
Do not connect your device to the power supply or
switch it on until instructed to do so in the installation
instructions.
Device Heating
Your device may become warm during charging and
during normal use.
Electrical Safety
Don’t store the battery in high temperature areas for
long periods of time. It’s best to follow these storage
rules.
Disposal of Lithium Ion (Li-Ion) Batteries
Do not handle a damaged or leaking Li-Ion battery as
you can be burned.
For safe disposal options of your Li-Ion batteries,
contact your nearest authorized service center.
Special Note: Be sure to dispose of your battery
properly. In some areas, the disposal of batteries in
household or business trash may be prohibited.
CTIA Requirements
a) Do not disassemble or open crush, bend or deform,
puncture or shred.
b) Do not modify or remanufacture, attempt to insert
foreign objects into the battery, immerse or expose to
water or other liquids, expose to fire, explosion or
other hazard.
c) Only use the battery for the system for which it is
specified.
d) Only use the battery with a charging system that
has been qualified with the system per CTIA
Certification Requirements for Battery System
Compliance to IEEE 1725. Use of an unqualified
battery or charger may present a risk of fire,
explosion, leakage, or other hazard.
e) Do not short circuit a battery or allow metalli
cconductive objects to contact battery terminals.
f) Replace the battery only with another battery that
has been qualified with the system per this standard,
IEEE-Std-1725. Use of an unqualified battery may
present a risk of fire, explosion, leakage or other
hazard.
g) Promptly dispose of used batteries in accordance
with local regulations.
h) Battery usage by children should be supervised.
j) Avoid dropping the device or battery. If the device
or battery is dropped, especially on a hard surface,
and the user suspects damage, take it to a service
center for inspection.
k) Improper battery use may result in a fire, explosion
or other hazard.
For those host devices that utilize a USB port as a
charging source, the host devic e’s user manual shall
include a statement that the device shall only be
connected to CTIA certified adapters, products that
bear the USB-IF logo or products that have
completed the USB-IF compliance program.
FCC Notice
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
Note: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will
not occur in a particular installation.
If this equipment does cause harmful interference to
radio or television reception, which can be
determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by one
or more of the following measures:
• Reorient the direction of the internal antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV
technician for help.
Caution: Changes or modifications not expressly
approved by the party responsible for compliance
could void the user‘s authority to operate the
equipment.
RF Exposure Information
This device complies with FCC radiation exposure
limits set forth for an uncontrolled environment.
In order to avoid the possibility of exceeding the FCC
radio frequency exposure limits, human proximity to
the antenna shall not be less than 20cm (8 inches)
during normal operation.
The manual is published by ZTE Corporation. We reserve
the right to make modifications on print errors or update
specifications without prior notice.
Warranty
Your device has been designed to provide you with
reliable, worry-free service. If for any reason you have
a problem with your equipment, please refer to the
manufacturer’s warranty in this section.
Manufacturer’s Warranty
ZTE (“Seller”) offers you a limited warranty that the
enclosed product or products (the “Product”) will be
free from defects in material and workmanship for a
period that expires one year from the date of sale of
the Product to you, provided that you are the original
end-user purchaser of the Product and provided that
your purchase was made from a supplier authorized
by the Seller. Transfer or resale of a Product will
automatically terminate warranty coverage with
respect to that Product. This limited warranty is not
transferable to any third party, including but not
limited to any subsequent purchaser or owner of the
Product. This limited warranty is applicable to end
users in the United States. Seller will, at its sole and
absolute discretion, either repair or replace a Product
(which unit may use refurbished parts of similar
quality and functionality) if found by Seller to be
defective in material or workmanship, or if Seller
determines that it is unable to repair or replace such
Product, Seller will refund the purchase price for such
Product, provided that the subject Product (i) is
returned to a Seller authorized service center within
the one year warranty period, and (ii) is accompanied
by a proof of purchase in the form of a bill of sale or
receipted invoice which evidences that the subject
Product is within the one year warranty period. After
the one year warranty period, you must pay all
shipping, parts and labor charges. In the event that
the product is deemed un-repairable or has been
removed from the list of products supported by the
Seller, you will only be liable for shipping and labor
charges.
This limited warranty does not cover and is void with
respect to the following: (i) any Product which has
been improperly installed, repaired, maintained or
modified; (ii) any Product which has been subjected
to misuse (including any Product used in conjunction
with hardware electrically or mechanically
incompatible or used with accessories not approved
by Seller), abuse, accident, physical damage,
abnormal operation, improper handling, neglect,
exposure to fire or liquid; (iii) any Product operated
outside published maximum ratings; (iv) cosmetic
damage; (v) any Product on which warranty stickers
or Product serial numbers have been removed,
altered, or rendered illegible; (vi) cost of installation,
removal or reinstallation; (vii) signal reception
problems (unless caused by defects in material and
workmanship); (viii) damage the result of fire, flood,
acts of God or other acts which are not the fault of
Seller and which the Product is not specified to
tolerate, including damage caused by mishandling,
shipping and blown fuses;(ix) consumables
(such as fuses); or (x) any Product which has been
opened, repaired, modified or altered by anyone other
than Seller or a Seller authorized service center.
USE ONLY SELLER APPROVED ACCESSORIES
WITH SELLER DEVICES. USE OF ANY
UNAUTHORIZED
ACCESSORIES MAY BE
DANGEROUS AND WILL INVALIDATE THE DEVICE
WARRANTY IF SAID ACCESSORIES CAUSE
DAMAGE OR A DEFECT TO THE DEVICE. SELLER
SPECIFICALLY DISCLAIMS LIABILITY FOR ANY
AND ALL DIRECT, INDIRECT, SPECIAL, GENERAL,
PUNITIVE, EXEMPLARY,
AGGRAVATED,INCIDENTAL OR CONSEQUENTIAL
DAMAGES, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES, WHETHER
FORESEEABLE OR UNFORESEEABLE OF ANY
KIND WHATSOEVER, INCLUDING BUT NOT
LIMITED TO LOSS OF PROFITS, UNANTICIPATED
BENEFITS OR REVENUE, ANTICIPATED PROFITS
ARISING OUT OF USE OF OR INABILITY TO USE
ANY PRODUCT (FOR EXAMPLE, WASTED
AIRTIME CHARGES DUE TO THE MALFUNCTION
OF A PRODUCT) OR CONTRIBUTION OR
INDEMNITY IN RESPECT OF ANY CLAIM
RELATED TO A PRODUCT.
REPAIR OR REPLACEMENT OF A DEFECTIVE
PRODUCT OR REFUND OF THE PURCHASE
PRICE RELATING TO A DEFECTIVE PRODUCT,
AS PROVIDED UNDER THIS WARRANTY, ARE
YOUR SOLE AND EXCLUSIVE REMEDIES FOR
BREACH OF THE LIMITED WARRANTY, AND
SUBJECT TO THIS WARRANTY, THE PRODUCTS
ARE APPROVED AND ACCEPTED BY YOU “AS IS”.
SELLER MAKES NO OTHER WARRANTIES,
REPRESENTATIONS OR CONDITIONS OF ANY
KIND, ORAL OR WRITTEN, EXPRESS OR IMPLIED,
STATUTORY OR OTHERWISE,WITH RESPECT TO
THE PRODUCTS, INCLUDING BUT NOT LIMITED
TO ANY IMPLIED WARRANTY OR CONDITION OF
MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE OR AGAINST
INFRINGEMENT OR ANY IMPLIED WARRANTY OR
CONDITION ARISING OUT OF TRADE USAGE OR
OUT OF A COURSE OF DEALING OR COURSE OF
PERFORMANCE. NO DEALER, DISTRIBUTOR,
AGENT OR EMPLOYEE IS AUTHORIZED TO MAKE
ANY MODIFICATION OR ADDITION TO THIS
WARRANTY.
Some jurisdictions do not allow the exclusion or
limitation of incidental or consequential damages, or
allow limitations on how long an implied warranty
lasts, so the above limitations or exclusions may not
apply to you. This limited warranty gives you specific
legal rights, and you may also have other rights which
vary from jurisdiction to jurisdiction. For warranty
service information, please call the following
telephone number: 1-877-817-1759, 1-212-444-0502
or return to the point of sale for the products. The
retailer can return the units to ZTE authorized service
center in US for repair service.
IMPORTANT: Please provide warranty information
(proof of purchase) to ZTE in order to receive
warranty service at no charge. If the warranty has
expired on the device, charges may apply.
©2017 ZTE. ZTE and the logos are trademarks of ZTE
Corporation. Other marks are the property of their respective
owners.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Author                          : 
Create Date                     : 2017:03:02 14:28:02+08:00
Creator                         : 
Modify Date                     : 2017:03:02 14:28:19+08:00
Producer                        : 福昕风腾PDF套件打印机 版本 7.2.0.0424
Subject                         : 
Title                           : 
Has XFA                         : No
Page Count                      : 16
EXIF Metadata provided by EXIF.tools
FCC ID Filing: SRQ-WF723S

Navigation menu