ZTE X501 CDMA2000 Digital Mobile Phone User Manual X501 FCC 20120213

Download:
Mirror Download [FCC.gov]
Document ID	1642697
Application ID	VNvDKkpzALGwI6TewovZqQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	18.7kB (233800 bits)
Date Submitted	2012-02-24 00:00:00
Date Available	2012-08-23 00:00:00
Creation Date	2017-11-01 20:11:33
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-11-01 20:11:33
Document Title	Microsoft Word - X501 user manual-FCC-20120213.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	JaneChiu

ZTE X501
User Guide
Contents
Using your phone .................... 1
Getting to know your phone ... 2
Onscreen icons........................ 3
Before getting started ............. 4
Inserting a memory card ........ 4
Using the battery ................... 5
Power on/off ............................. 7
Powering on .......................... 7
Powering off .......................... 7
Basic Operation ....................... 8
Screen control ....................... 8
Open and close the Launcher 8
Switch to a recently used
application ............................. 9
Home screen ......................... 9
Display the dialing keypad ... 10
Switch to sleep mode .......... 11
Wake up your phone............ 11
Bluetooth®............................ 12
Text Input ............................... 15
Android Keyboard ................ 15
Swype.................................. 16
Appendix ................................ 17
Care and maintenance ........ 17
Consumer limited warranty .. 18
Additional safety information 21
Using your phone
Thanks for choosing the ZTE X501. It’s a CDMA2000 1X EVDO Digital Mobile
Phone, which is shortly referred to as ‘phone’ from now on. Under the Android
operating system, the phone supports 3G high-speed Internet access, which
brings you brand new experiences.
Don’t worry if the pictures we use to demonstrate your phone’s functions look
a little different from what you see on the screen. It’s the functions that matter.
1 Using your phone
Getting to know your phone
Power key
Headset jack
Camera
Earpiece
Touch screen
Speaker
Volume keys
Search Key
Memory card slot
USB port
Home key
Menu key
Camera key
Back key
Getting to know your phone
Onscreen icons
Icons
Descriptions
Descriptions
No signal
Full battery
Charging
Low battery
In a call
Connected on 3G
You have an unread message.
Speakerphone on
You have an unheard
voicemail.
Call forwarding on
You have an unread E-mail.
No memory card
You have an unread G-mail.
Call held
Connected to a PC
Vibration mode
Music playing
Silence mode
New calendar reminder
Flight mode
Alarm clock on
Missed calls
Wi-Fi function on
®
Bluetooth function is on
Roaming
3 Onscreen icons
Icons
Signal strength
Receiving location data from
GPS
Before getting started
Inserting a memory card
1. Open the memory card cover on the right side of the phone and insert a
memory card.
2. Push tightly until the card is installed in the right position and close the
cover.
3. Before you take out the card, please open the cover and press the card
inward to unlock.
Note:
This mobile phone supports memory cards. For details on compatibility
information of memory, please consult your manufacturer or supplier.
Before getting started
Using the battery
Inserting the battery
1. Open the battery cover on the back of your phone.
2. Align the battery's contact points with those of the phone and gently
press the battery down into place.
3. Replace the battery cover clicking it back into position.
Removing the battery
1. Switch off your phone.
2. Open the battery cover.
3. Lift the battery up and out of your phone.
5 Before getting started
Charging the battery
The rechargeable Li-ion battery that comes with your phone is ready to use
but is not charged. That’s easy to do. We’ll show you how below.
The first three times you use the battery, make sure it’s completely drained
before recharging and then recharge it fully. That will help to ensure its
optimum performance and a long life.
1. Connect the charger to your phone and plug it into an
110V/220V socket.
2. The battery indicator in the corner of the screen will
scroll up and down to show you it’s charging. Please
don’t worry if the phone and charger become warm
while charging. That’s completely normal.
3. When fully charged, the battery indicator will stop
scrolling.
4. Disconnect the charger from your mobile and unplug.
5. Or using USB cable which should be shielded cable.
Before getting started
Power on/off
Powering on
Long press the Power key until the power-on animation appears.
Powering off
Long press the Power key to display the menu Phone options and select
Power off.
7 Power on/off
Basic Operation
Screen control
You can control your phone through a series of operations on the screen.

Press: you can press the items on the screen to select, open the
applications, or use the keyboard to input characters.

Slide: you can scroll up/down the page or scroll the page left/right by
sliding vertically or horizontally on the screen.

Long press: you can long press some items to get the item’s available
menu.

Drag: you can drag some items on the screen to realize some
operations.

Switch between landscape mode and portrait mode: you can switch
to the landscape mode by rotating your phone. The landscape mode is
only valid under some interfaces, such as text input interface, message
viewing interface, etc.
Open and close the Launcher
On the home screen, press the
icon to open the Launcher. You can
slide the Launcher left or right to view more.
After opening the Launcher, press an icon to enter the corresponding
Basic Operation
application. Press the Back key to return to the previous screen. Press the
Home key to return to the home screen.
Switch to a recently used application
Press and hold the Home key. A window opens with icons of applications that
you’ve used recently.
Press an icon to open its application.
Home screen
Notification bar
Screen Indicator
Status bar
Display area
Icons
Tap the icon to open the
relevant application.
Phone icon
Messaging icon
Launcher icon
9 Basic Operation
Tap the icon to view all installed
applications on the phone.
Tap and hold the icon to view the
home screen thumbnails.
Add icons to the home screen
Long press the empty area on the home screen to pop up the Add to Home
screen menu. Select Shortcuts, Widgets, Folders, etc.
You can copy icons from the Launcher to the home screen by long pressing
an icon in the Launcher until the icon enlarges and the phone vibrates.
Move icons on the home screen
1. Long press an icon until the icon enlarges and the phone vibrates.
2. Drag the icon to your desired position and then release.
Delete icons on the home screen
1. Long press an icon until the icon enlarges and the phone vibrates.
2. Drag the icon into
at the lower part of the screen to delete.
Change wallpaper
1. In idle mode, press the Menu key and select Wallpaper.
2. Press Gallery / Live wallpapers / Wallpapers to enter the image library.
3. Select one image and press Set wallpaper.
Display the dialing keypad
On the home screen, press the button
to display the dialing
Basic Operation
10
keypad.
Switch to sleep mode
Sleep mode is a kind of power-saving mode, which prevents against
inadvertent operations.
If your phone has been in the idle mode for a while, it will automatically switch
to sleep mode. You can also press the Power key to turn off the screen and
enable sleep mode.
Note:
Within 15 minutes after the screen is switched to the Sleep mode, the
network will automatically disconnect; as the screen is awakened from the
Sleep mode, the network will connect again.
Wake up your phone
After the phone switches to the sleep mode, the screen will be turned off and
locked. In this case please awake your phone and unlock the screen if you
want to use your phone.
1. Press the Power key to turn on the screen.
2. Drag the icon
to the right to unlock the screen.
If you've set unlock pattern or password, you need to draw the unlock pattern
or input the password to enter the main interface. (For details, please see
11 Basic Operation
Settings > Location & security > Set up screen lock >
Pattern/Password).
Bluetooth®
Via the Bluetooth® function, you can exchange data with other Bluetooth®
devices that are within a short distance. Because Bluetooth® devices
communicate through radio waves, interference might exist due to obstacles
or other electronic devices.
Turn on/off Bluetooth®
1. On the home screen, press the Menu key, then press Settings > Wireless
& networks.
2. Check or uncheck Bluetooth® to turn it on or off.
Pairing
1. In the Bluetooth® settings menu, press Scan for devices. Your phone
will scan and display all Bluetooth® devices found.
2. Press the ID of the desired device.
3. Press Pair.
4. If you are prompted to enter a passcode, try entering 0000 or 1234 (the
most common passcodes), or consult the documentation that came with
the device to learn its passcode.
5. When the owner of the other device enters the same passcode or accepts
Basic Operation
12
the connection, pairing is complete.
Send files via Bluetooth®
To send files via Bluetooth®, do as follows:
1. Select a file or item, such as a contact or a media file from an appropriate
application or File manager.
2. Press the Menu key then select Share > Bluetooth®.
3. Search for and pair with a Bluetooth®-enabled device.
13 Basic Operation
®
The Bluetooth trademark and logos are owned by the Bluetooth SIG, Inc. and any use of such trademarks
by ZTE Corporation is under license. Other trademarks and trade names are the property of their respective
owners.
Basic Operation
14
Text Input
Your phone supports the Android keyboard input method and the Swype
input method. The Android keyboard supports multiple language inputs.
On the text screen, touch and hold the space where you usually write your
text until the Edit text menu is displayed. Touch Input method and select the
input options.
Android Keyboard
Touch once to capitalize the
next letter you type. Touch
and hold for all caps.
Change to symbol/number
mode. Tap again to change
back.
Select input method or
keyboard settings
15 Text Input
Delete a character before
the cursor.
Insert a smiley.
Insert space
Swype
Swype is a text input method that allows you to enter a word by sliding your
finger or from letter to letter, lifting your finger between words.
Touch once to capitalize the
next letter you type. Touch
and hold for all caps.
Delete a character before
the cursor.
Allows you to view Swype
Tips and Help.
Toggles from 123/ABC
mode to SYM mode.
Insert space
Text Input
16
Appendix
Care and
maintenance
Your device is a product of superior
design and craftsmanship and
should be treated with care. The
following suggestions will help you
protect your warranty coverage.
• Keep the device dry. Precipitation,
humidity, and all types of liquids
or moisture can contain minerals
that will corrode electronic
circuits. If your device does get
wet, remove the battery, and
allow the device to dry
completely before replacing it.
• Do not use or store the device in
dusty, dirty areas. Its electronic
components can be damaged.
• Do not store the device in hot
areas. High temperatures can
shorten the life of electronic
devices, damage batteries, and
warp or melt certain plastics.
17 Appendix
• Do not store the device in cold
areas. When the device returns
to its normal temperature,
moisture can form inside the
device and damage electronic
circuit boards.
• Do not attempt to open the device
other than as instructed in this
guide.
• Do not drop, knock, or shake the
device. Rough handling can
break internal circuit boards and
fine mechanics.
• Do not use harsh chemicals,
cleaning solvents, or strong
detergents to clean the device.
• Do not paint the device.
• Unauthorized antennas,
modifications, or attachments
could damage the device and
may violate regulations
governing radio devices.
• Use chargers indoors.
• Always create a backup of data
you want to keep, such as
contacts and calendar notes.
• To reset the device from time to
time for optimum performance,
power off the device and remove
the battery.
These suggestions apply equally
to your device, battery, charger, or
any accessory. If the device is not
working properly, take it to the
nearest authorized service facility
for service.
Consumer limited
warranty
ZTE® (‘Seller’) offers you a limited
warranty that the enclosed product
or products (the ‘Product’) will be
free from defects in material and
workmanship for a period that
expires one year from the date of
sale of the Product to you, provided
that you are the original end-user
purchaser of the Product and
provided that your purchase was
made from a supplier authorized by
the Seller. Transfer or resale of a
Product will automatically terminate
warranty coverage with respect to
that Product. This limited warranty is
not transferable to any third party,
including but not limited to any
subsequent purchaser or owner of
the Product. This limited warranty is
applicable only to end users in the
United States.
Seller will, at its sole and absolute
discretion, either repair or replace a
Product (which unit may use
refurbished parts of similar quality
and functionality) if found by Seller
to be defective in material or
workmanship, or if Seller
determines that it is unable to repair
or replace such Product, Seller will
refund the purchase price for such
Product, provided that the subject
Product (i) is returned to a Seller
authorized service center within the
one year warranty period, and (ii) is
accompanied by a proof of
purchase in the form of a bill of sale
or receipted invoice which
evidences that the subject Product
Appendix
18
is within the one year warranty
period. After the one year warranty
period, you must pay all shipping,
parts and labor charges. In the
event that the product is deemed
un-repairable or has been removed
from the list of products supported
by the Seller, you will only be liable
for shipping and labor charges.
This limited warranty does not
cover and is void with respect to
the following: (i) any Product which
has been improperly installed,
repaired, maintained or modified;
(ii) any Product which has been
subjected to misuse (including any
Product used in conjunction with
hardware electrically or
mechanically incompatible or used
with accessories not approved by
Seller), abuse, accident, physical
damage, abnormal operation,
improper handling, neglect,
exposure to fire or liquid; (iii) any
Product operated outside
published maximum ratings; (iv)
cosmetic damage; (v) any Product
xxxxxxxxxx xxxxxxx
on which warranty stickers or
Product serial numbers have been
removed, altered, or rendered
illegible; (vi) cost of installation,
removal or reinstallation; (vii)
signal reception problems (unless
caused by defects in material and
workmanship); (viii) damage the
result of fire, flood, acts of God or
other acts which are not the fault of
Seller and which the Product is not
specified to tolerate, including
damage caused by mishandling,
shipping and blown fuses; (ix)
consumables (such as fuses); or (x)
any Product which has been
opened, repaired, modified or
altered by anyone other than Seller
or a Seller authorized service
center.
USE ONLY SELLER APPROVED
ACCESSORIES WITH SELLER
PHONES. USE OF ANY
UNAUTHORIZED ACCESSORIES
MAY BE DANGEROUS AND WILL
INVALIDATE THE PHONE
WARRANTY IF SAID
ACCESSORIES CAUSE
DAMAGE OR A DEFECT TO THE
PHONE.
SELLER SPECIFICALLY
DISCLAIMS LIABILITY FOR ANY
AND ALL DIRECT, INDIRECT,
SPECIAL, GENERAL, PUNITIVE,
EXEMPLARY, AGGRAVATED,
INCIDENTAL OR
CONSEQUENTIAL DAMAGES,
EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH
DAMAGES, WHETHER
FORESEEABLE OR
UNFORESEEABLE OF ANY KIND
WHATSOEVER, INCLUDING BUT
NOT LIMITED TO LOSS OF
PROFITS, UNANTICIPATED
BENEFITS OR REVENUE,
ANTICIPATED PROFITS ARISING
OUT OF USE OF OR INABILITY
TO USE ANY PRODUCT (FOR
EXAMPLE, WASTED AIRTIME
CHARGES DUE TO THE
MALFUNCTION OF A PRODUCT)
OR CONTRIBUTION OR
INDEMNITY IN RESPECT OF
ANY CLAIM RELATED TO A
PRODUCT.
REPAIR OR REPLACEMENT OF
A DEFECTIVE PRODUCT OR
REFUND OF THE PURCHASE
PRICE RELATING TO A
DEFECTIVE PRODUCT, AS
PROVIDED UNDER THIS
WARRANTY, ARE YOUR SOLE
AND EXCLUSIVE REMEDIES
FOR BREACH OF THE LIMITED
WARRANTY, AND SUBJECT TO
THIS WARRANTY, THE
PRODUCTS ARE APPROVED
AND ACCEPTED BY YOU ‘AS IS’.
SELLER MAKES NO OTHER
WARRANTIES,
REPRESENTATIONS OR
CONDITIONS OF ANY KIND,
ORAL, EXPRESS OR IMPLIED,
STATUTORY OR OTHERWISE,
WITH RESPECT TO THE
PRODUCTS, INCLUDING BUT
NOT LIMITED TO ANY IMPLIED
WARRANTY OR CONDITION OF
MERCHANTABILITY OR
Appendix
20
FITNESS FOR A PARTICULAR
PURPOSE OR AGAINST
INFRINGEMENT OR ANY
IMPLIED WARRANTY OR
CONDITION ARISING OUT OF
TRADE USAGE OR OUT OF A
COURSE OF DEALING OR
COURSE OF PERFORMANCE.
NO DEALER, DISTRIBUTOR,
AGENT OR EMPLOYEE IS
AUTHORIZED TO MAKE ANY
MODIFICATION OR ADDITION
TO THIS WARRANTY. IF SELLER
CANNOT LAWFULLY DISCLAIM
STATUTORY OR IMPLIED
WARRANTIES THEN TO THE
EXTENT PERMITTED BY LAW,
ALL SUCH WARRANTIES SHALL
BE LIMITED IN DURATION TO
THE DURATION OF THIS
LIMITED WARRANTY.
Some jurisdictions do not allow the
exclusion or limitation of incidental
or consequential damages, or
allow limitations on how long an
xxxxxxxxxx xxxxxxx
implied warranty lasts, so the
above limitations or exclusions
may not apply to you. This limited
warranty gives you specific legal
rights, and you may also have
other rights which vary from
jurisdiction to jurisdiction.
Note: Please use only approved
charging accessories to charge
your ZTE® phone.
Improper handling of the
accessory/charger port, as well as
the use of an incompatible charger,
may cause damage to your phone
and void the warranty.
Additional safety
information
Small children
Your device and its enhancements
may contain small parts. Keep
them out of the reach of small
children.
Operating environment
This device meets RF exposure
guidelines when used either in the
normal use position against the ear
or when positioned at least 2
centimeters (4/5 inches) away from
the body. When a carry case, belt
clip, or holder is used for
body-worn operation, it should not
contain metal and should position
the device the above-stated
distance from your body.
To transmit data files or messages,
this device requires a quality
connection to the network. In some
cases, transmission of data files or
messages may be delayed until
such a connection is available.
Ensure the above separation
distance instructions are followed
until the transmission is completed.
Parts of the device are magnetic.
Metallic materials may be attracted
to the device. Do not place credit
cards or other magnetic storage
media near the device, because
information stored on them may be
erased.
Medical devices
Operation of any radio transmitting
equipment, including wireless
devices, may interfere with the
functionality of inadequately
protected medical devices. Consult
a physician or the manufacturer of
the medical device to determine if
they are adequately shielded from
external RF energy or if you have
any questions. Switch off your
device in health care facilities
when any regulations posted in
these areas instruct you to do so.
Hospitals or health care facilities
may be using equipment that could
be sensitive to external RF energy.
Implanted medical devices
Manufacturers of medical devices
recommend that a minimum
separation of 15.3 centimeters (6
Appendix
22
inches) should be maintained
between a wireless device and an
implanted medical device, such as
a pacemaker or implanted
cardioverter defibrillator, to avoid
potential interference with the
medical device. Persons who have
such devices should:
Always keep the wireless device
more than 15.3 centimeters (6
inches) from the medical device
when the wireless device is turned
on.
• Not carry the wireless device in a
breast pocket.
• Hold the wireless device to the
ear opposite the medical device
to minimize the potential for
interference.
• Turn the wireless device off
immediately if there is any reason
to suspect that interference is
taking place.
• Read and follow the directions
xxxxxxxxxx xxxxxxx
from the manufacturer of their
implanted medical device.
If you have any questions about
using your wireless device with an
implanted medical device, consult
your health care provider.
Hearing aids
Some digital wireless devices may
interfere with some hearing aids. If
interference occurs, consult your
service provider.
Vehicles
RF signals may affect improperly
installed or inadequately shielded
electronic systems in motor
vehicles such as electronic fuel
injection systems, electronic
antiskid (antilock) braking systems,
electronic speed control systems,
and air bag systems. For more
information, check with the
manufacturer, or its representative,
of your vehicle or any equipment
that has been added.
Only qualified personnel should
service the device or install the
device in a vehicle. Faulty installation
or service may be dangerous and
may invalidate any warranty that may
apply to the device. Check regularly
that all wireless device equipment in
your vehicle is mounted and
operating properly. Do not store or
carry flammable liquids, gases, or
explosive materials in the same
compartment as the device, its parts,
or enhancements. For vehicles
equipped with an air bag, remember
that air bags inflate with great force.
Do not place objects, including
installed or portable wireless
equipment in the area over the air
bag or in the air bag deployment
area.
If in-vehicle wireless equipment is
improperly installed and the air bag
inflates, serious injury could result.
Using your device while flying in
aircraft is prohibited. Switch off
your device before boarding an
aircraft. The use of wireless
teledevices in an aircraft may be
dangerous to the operation of the
aircraft, disrupt the wireless
telephone network, and may be
illegal.
Potentially explosive
environments
Switch off your device when in any
area with a potentially explosive
atmosphere, and obey all signs
and instructions. Potentially
explosive atmospheres include
areas where you would normally
be advised to turn off your vehicle
engine. Sparks in such areas could
cause an explosion or fire resulting
in bodily injury or even death.
Switch off the device at refueling
points such as near gas pumps at
service stations. Observe
restrictions on the use of radio
equipment in fuel depots, storage,
Appendix
24
and distribution areas; chemical
plants; or where blasting
operations are in progress. Areas
with a potentially explosive
atmosphere are often, but not
always, clearly marked. They
include below deck on boats,
chemical transfer or storage
facilities and areas where the air
contains chemicals or particles
such as grain, dust, or metal
powders. You should check with
the manufacturers of vehicles
using liquefied petroleum gas
(such as propane or butane) to
determine if this device can be
safely used in their vicinity.
xxxxxxxxxx xxxxxxx
Emergency calls
Important: This device operates
using radio signals, wireless
networks, landline networks, and
user-programmed functions.
Connections in all conditions
cannot be guaranteed. You should
never rely solely on any wireless
device for essential
communications like medical
emergencies.
To make an emergency call:
3. Enter the official emergency
number for your present location.
Emergency numbers vary by
location.
4. Press the
icon.
When making an emergency call,
give all the necessary information
as accurately as possible. Your
wireless device may be the only
means of communication at the
scene of an accident. Do not end
the call until given permission to do
so.
1. If the device is not on, switch it
on. Check for adequate signal
strength. Depending on your
device, you may also need to
complete the following:
• Remove certain call restrictions
you have activated in your
device.
2. On the home screen, press the
icon to display the dialing
keyboard.
Appendix
26
Certification information
(SAR)
This mobile device meets
guidelines for exposure to radio
waves.
Your mobile device is a radio
transmitter and receiver. It is
designed not to exceed the limits
for exposure to radio waves
recommended by international
guidelines. These guidelines were
developed by the independent
scientific organization ICNIRP and
include safety margins designed to
assure the protection of all persons,
regardless of age and health.
The exposure guidelines for mobile
devices employ a unit of
measurement known as the
Specific Absorption Rate or SAR.
The SAR limit stated in the ICNIRP
guidelines is 1.6 watts/kilogram
(W/kg) averaged over 1 grams of
tissue. Tests for SAR are
conducted using standard
operating positions with the device
xxxxxxxxxx xxxxxxx
transmitting at its highest certified
power level in all tested frequency
bands. The actual SAR level of an
operating device can be below the
maximum value because the
device is designed to use only the
power required to reach the
network. That amount changes
depending on a number of factors
such as how close you are to a
network base station.
Use of device accessories and
enhancements may result in
different SAR values. SAR values
may vary depending on national
reporting and testing requirements
and the network band.
Your mobile device is also
designed to meet the requirements
for exposure to radio waves
established by the Federal
Communications Commission
(USA) and Industry Canada.
These requirements set a SAR
limit of 1.6 W/kg averaged over
one gram of tissue. The highest
SAR value reported under this
standard during product
certification for use at the ear is
1.15 W/Kg and when properly worn
on the body is 1.45 W/Kg.
While there may be differences
between the SAR levels of various
phones and at various positions,
they all meet the government
requirement.
The FCC has granted an
Equipment Authorization for this
model phone with all reported SAR
levels evaluated as in compliance
with the FCC RF exposure
guidelines. SAR information on
this model phone is on file with the
FCC and can be found under the
Display
Grant
section
of
www.fcc.gov/oet/ea/fccid
after
searching on FCC ID: Q78-X501.
For body worn operation, this
phone has been tested and meets
the FCC RF exposure guidelines
for use with an accessory that
contains no metal and the
positions the handset a minimum
of 1.0 cm from the body. Use of
other accessories may not ensure
compliance with FCC RF exposure
guidelines. If you do not use a
body-worn accessory and are not
holding the phone at the ear,
position the handset a minimum of
1.0 cm from your body when the
phone is switched on.
FCC compliance information
This device complies with Part 15
of the FCC Rules. Operation is
subject to the following two
conditions:
(1) This device may not cause
harmful interference, and (2) This
device must accept any
interference received.
Including interference that may
Appendix
28
cause undesired operation.
U.S.A. U.S.FEDERAL
COMMUNICATIONS
COMMISSION RADIO
FREQUENCY INTERFERENCE
STATEMENT
INFORMATION TO THE USER
Note: This equipment has been
tested and found to comply with
the limits for a Class B digital
device pursuant to Part 15 of the
FCC Rules. These limits are
designed to provide reasonable
protection against harmful
interference in a residential
installation. This equipment
generates, uses, and can radiate
radio frequency energy and, if Not
installed and used in accordance
with the instructions, may cause
harmful Interference to radio
communications. However, there is
no guarantee that interference will
not occur in a particular installation.
If this equipment does cause
harmful interference to radio or
television reception, which can be
xxxxxxxxxx xxxxxxx
determined by turning the
equipment off and on, the user is
encouraged to try to correct the
interference by one or more of the
following measures:
*- Reorient or relocate the
receiving antenna. Increase the
separation between the
equipment and receiver.
*- Connect the equipment into an
outlet of a circuit different from
that to which the receiver is
connected.
*- Consult the dealer or an
experienced radio/TV technician
for assistance.
Changes or modification not
expressly approved by the party
responsible for compliance could
void the user’s authority to operate
the equipment. Connecting of
peripherals requires the use of
grounded shielded signal cables.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Author                          : JaneChiu
Create Date                     : 2012:02:24 19:17:29+08:00
Modify Date                     : 2012:02:24 19:18:42+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Format                          : application/pdf
Creator                         : JaneChiu
Title                           : Microsoft Word - X501 user manual-FCC-20120213.doc
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2012:02:24 19:18:42+08:00
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Document ID                     : uuid:e0c5e6e3-ddf3-47d3-83c8-8ea33e934065
Instance ID                     : uuid:43774d4d-c4e3-4914-8473-0afa3a9652f1
Page Count                      : 31

EXIF Metadata provided by EXIF.tools