Contents
- 1. user Manual rev1
- 2. user manual rev1
user manual rev1
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1367434 |
| Application ID | kPihZSr2j5SDPE1wIfKN/Q== |
| Document Description | user manual rev1 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 37.52kB (468977 bits) |
| Date Submitted | 2010-10-28 00:00:00 |
| Date Available | 2011-05-01 00:00:00 |
| Creation Date | 2010-10-28 20:32:29 |
| Producing Software | Microsoft® Office Word 2007 |
| Document Lastmod | 2010-10-28 20:32:29 |
| Document Title | 1 |
| Document Creator | Microsoft® Office Word 2007 |
| Document Author: | usermt |
ZTE3200 User Manual The manual is applicable for the ZTE3200 3. 文档信息 版本 1.0 2. 修订日期 2010 年 6 月 修订人 liuhongmei 软件版本 备注 Copyright © 2010 by ZTE Corporation All rights reserved. No part of this publication may be quoted, reproduced, translated or used in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE Corporation. ZTE Corporation reserves the right to make modifications on print errors or update specifications in this manual without prior notice. Version 1.0 in Jun. 2010 2. Contents You ZTE 3200 Device .................................................................................. 1 1.1 How to Use This guide ............................................................................ 2 1.1.1 Getting More Information About the Device and Service....... 3 Section 1 ..................................................................................................... 4 Introducing the ZTE 3200 ........................................................................... 4 3.1 Introducing the ZTE 3200 ....................................................................... 5 3.1.1 Package Contents ................................................................ 5 3.1.2 Care and Maintenance ......................................................... 5 Section 2 ..................................................................................................... 7 Using the ZTE 3200 device ........................................................................ 7 5.1 ........................................................................................................................ 7 2. 5.2 Charging the Battery ............................................................................... 8 5.3 Battery Tips............................................................................................. 9 5.4 Connecting to the ZTE 3200 ................................................................. 10 5.5 5.4.1 How to connect the ZTE 3200 ............................................ 11 5.4.2 Using the Device Outside of the United States ................... 12 5.4.3 Connecting sprint Customer Service .................................. 13 5.4.4 Troubleshooting .................................................................. 13 5.4.5 Using the Master Reset Button ........................................... 14 5.4.6 Using the WLAN ................................................................. 15 Configuring the ZTE 3200 Device ......................................................... 17 5.5.1 Opening the Browser Interface ........................................... 17 5.5.2 Administration..................................................................... 19 Section 3 ................................................................................................... 26 Technical Specifications, Regulatory and Safety Information, Warranty, and Glossary ......................................................................................................... 27 7.1 7.2 4. Technical Specifications ........................................................................ 28 7.1.1 LED Overview .................................................................... 28 7.1.2 Environmental Specifications .............................................. 29 7.1.3 Mechanical Specifications .................................................. 29 7.1.4 CDMA Technology .............................................................. 30 Regulatory Information ......................................................................... 30 7.3 4. 7.2.1 Regulatory Notices ............................................................. 31 7.2.2 States) Federal Communications Commission Notice(FCC – United 32 7.2.3 Iimitation of liability ............................................................. 32 7.2.4 Additional Information and Updates .................................... 33 Important Safety Information................................................................. 34 7.3.1 Important Notice ................................................................. 34 7.3.2 Safety and Hazards ............................................................ 35 7.4 ZTE Wireless Limited Warranty and Liability ......................................... 36 7.5 Glossary ............................................................................................... 37 1 You ZTE 3200 Device Thanks for choosing the ZTE 3200. This device offers more freedom than ever before. No wires, no cables-just access to your data when you need it. The power of the Internet is truly at your fingertips. 5. 1.1 How to Use This guide The advances of Sprint are as clear as each wireless connection you make. With Sprint service, we give you what you really want from a wireless service provider-clear connections, easy-to-understand service plans, and 5. self-servicing options for managing your account, All this is designed to make your life easier and worry-free. We know you‟re eager to start using your device right away, and the sections of this guide are designed to help you do just that. The first section ( contents. The second section ( ) guides you through the steps required to set up and use your device. The third section ( ) lists technical specifications and regulatory, safety, and warranty information for your device. There is also a glossary of technical terms used in this guide. ) gives an overview of the device package 1.1.1Getting More Information About the Device and Service This guide describes how to set up and use the device. To learn how to use all the features of your device and its browser interface, consult the user guide (available at www.sprint.com) or online help. 5. 2 Section 1 3 Introducing the ZTE 3200 5. 3.1 Introducing the ZTE 3200 Package Contents Care and Maintenance This section introduces your ZTE 3200 device. 3.1.1Package Contents Your ZTE 3200 device package contains the following components: ZTE 3200 Get Started guide (this document) Protective pouch 3.1.2Care and Maintenance As with any electronic device, the ZTE 3200 device must be handled with care to ensure reliable operation. Follow these guidelines in using and storing the device: Protect the device from liquids, dust, and excessive heat. 5. When not in use, store the device in a safe place. Do not handle or operate the device while driving or operating a vehicle. Doing so may distract you from properly operating the vehicle. In some jurisdictions, operating communication devices while in control of a vehicle is a criminal offense. 5. 4 Section 2 5 Using the ZTE 3200 device 5.1 5. 5.2 Charging the Battery To ensure the battery is always in its best condition, please exhaust the capacity of the battery and then fully recharge it for the first three times of usage. 1. Insert the plug in USB interface cover at the left side of the device. 2. When the device is powered on, the capacity indicator on bottom of the device will blink. The device have 5 individual light emitting bulbs dedicated to showing network signal strength and battery level (left to right/low to high). 5. Note: 1. You must have a fully charged battery the first time you use the ZTE 3200. 2. The battery lasts up to 40 hours in standby mode. 5.3 Battery Tips Note: Use the original charger or those authenticated by the manufacturer. Using non-original charger may cause danger and violate the warranty provisions. Battery life depends on the network, signal strength, temperature, features, and accessories you use. If you connect your device to your computer using a USB data cable, the battery will charge. However, the device will not function as a wireless access point while connected to your computer. 5. It normally takes at least 2.5 hours to fully charge the battery. New batteries or batteries stored for a long time may take more time to charge. When charging your battery, keep it near room temperature. Some batteries perform best after several full charge and discharge cycles. When storing your battery, keep it uncharged in a cool, dark, dry place. Never expose batteries to temperatures below 14°F(-10℃) or above 113°F(45℃). Never leave the device in an unattended vehicle due to uncontrollable temperatures that may be outside the desired temperature for this device. 5.4 Connecting to the ZTE 3200 When you press the power button: The ZTE 3200 comes on and the power button LED lights up. 5. 10 The middle of the 5 Led blinks showing the device is working. 5.4.1How to connect the ZTE 3200 1. Use your normal Sprint manager on your computer to located the ZTE 3200 wireless network. 2. If multiple wireless networks are found, highlight the one that has “ZTE 3200” in its name. 3. Click Connect If this is your first time connecting to the ZTE 3200, continue with these steps. 4. From your computer‟s Web browser, enter http://192.168.2.1 into the address window and press the Enter or Return key. 5. Enter the password “admin” when requested. An onscreen wizard will launch and guide you through setting up security for your ZTE 3200. Note: Be sure to record both the Administrative password and the 5. 11 Network Key that you create using the Initial Setup Wizard. 6. Follow the instructions on the screen. 7. After you click Finish, your device will restart and you must reconnect to your wireless network and enter the Network key you just created. For details on how to further configure the device with the Web user interface, see “Configuring the ZTE 3200” on page 5.4.2Using the Device Outside of the United States Sprint customers can use the ZTE 3200 to browse the Internet and access email and corporate intranets while roaming in Canada, Mexico, and other destinations. Charges may apply when using the ZTE 3200 outside of the United States. For more information, please visit www.sprint.com. 5. 12 5.4.3Connecting sprint Customer Service You can reach Sprint Customer Service by: Logging on to your account at www.sprint.com. Calling us toll-free at Writing to us at Sprint Customer Service, P.O. Box 8077,London, KY 40742. 5.4.4Troubleshooting Problem/error The device has Solution no Ensure the following: power(The LED indicator is The battery is properly seated. off and does not come on The battery is fully charged. Plug in the AC wall adapter for at least 2.5 hours. when the Power button is 5. 13 pressed.) I forgot my password. No service is available. Limited or no connectivity. You can reset the device to factory defaults by using the master reset button. Try the following: Reorient your device. If you are inside a building or near a structure that may be blocking the signal, change the position or location of the device. Check with Sprint a network or account problem may be preventing the device from obtaining service. 5.4.5Using the Master Reset Button Your device comes with a master reset button that allows you to return it to its factory default state. The master reset button is recessed in a hole on the left of the device. You 5. 14 will need a paperclip or similar object to push the button. 3. Make sure the device is powered on. 4. Locate the master reset button on the left of the device. 5. Insert a paperclip into the hole and hold the button down for three seconds until the green LED goes off and then blinks. Your list of wireless network will now show the original default network when you first configured your device. 6. Connect to the device again and reconfigure it using the Initial Setup Wizard. 5.4.6Using the WLAN The WLAN section contains details of the Wireless LAN, also called Wi-Fi network or an 802.11 network. 5. 15 The following data is presented. Profile-The Wireless(802.11)profile currently in use. There are 3 possible profiles; each has its own settings. Once you login, you can change the profile in use. Network Name- The network name(SSID)used by the current Wi-Fi profile. Security-The security method used by the current Wi-Fi profile. User-The number of users (wireless clients)connected to this ZTE3200,and the number of wireless clients allowed. This is presented in the form “number connected/number allowed”. IP address-The IP address of this ZTE3200,as seen by devices on the WLAN(802.11 wireless network) Mask-The network mask associated with the IP address above. 5. 16 5.5 Configuring the ZTE 3200 Device The ZTE 3200 comes with a browser interface that allows you to configure the device. You can select a profile, establish security, and set more advanced settings. In addition, you can search using GPS technology and provide temporary shared Internet access to a maximum of five Wi-Fi-enabled devices. The user guide (available from www.sprint.com) and help for the browser interface contain detailed information about these settings. 5.5.1Opening the Browser Interface 1. Open your Web browser and enter http://208.29.16.165/j/b/peel/index.html into the address window.（If 5. 17 this is the first time you have entered the browser interface or if you have used the master reset button, the Initial Setup Wizard will launch.） 2. Enter the Administrative password into the Login password box in the upper right corner and click Login. 3. The Mobile Hotspot Home page will open. The Home page contains the following sections: Internet: Admin: 5. 18 Help: 5.5.2Administration 5. 19 5. 20 5. 21 5. 22 5. 23 5. 24 5. 25 6 Section 3 5. 26 7 Technical Specifications, Regulatory and Safety Information, Warranty, and Glossary 5. 27 7.1 Technical Specifications This section describes the LED indicators and various specifications of your ZTE 3200. 7.1.1LED Overview Your device has a Service Status LED and a Power Button LED, which provide status information about the device. The yellow Sprint LED does not provide status information. LED Signal strength Battery level 1 Red LED No Service 5% and under 1 Green LED -100 dBm > RF Energy AND -14> Ec /Io 5~20% 2 Green LEDs -95 dBm > RF Energy > -100 AND -13> Ec /Io > -14 20~40% 3 Green LEDs: -90 dBm > RF Energy > -95 dBm AND -12 > Ec /Io > -13 40~60% 5. 28 4 Green LEDs: -85 dBm > RF Energy > -90 dBm AND -11 > Ec /Io > -12 60~80% 5 Green LEDs: -84 dBm < RF Energy AND Ec /Io > -11 80~100% 7.1.2Environmental Specifications Operating conditions -20°C ~ +55°C , 85% (at 50°C), relative humidity (non-condensing) Storage temperature -35°C ~ +75°C Humidity 95%, non-condensing 7.1.3Mechanical Specifications Dimensions 5. 121X66.8X22mm 29 Weight Approx. TBD Form factor USB Housing material PC 7.1.4CDMA Technology Frequencies CDMA 800/1900 MHz Interface type Micro USB Common air interface CDMA Antenna diversity Support Receive Diversity DC input operating voltage +5VDC from USB host port Maximum current @+5VDC Under 1A 7.2 Regulatory Information This section contains important regulatory notices about your ZTE 3200 device and also patent and other information. 5. 30 7.2.1Regulatory Notices This device is designed to be activated on the Sprint network and has a software programming lock that, in part, protects many of the device‟s features and functions against tampering and unauthorized reprogramming. This device will work with Sprint services-service plans and other services/options must be purchased separately. This device operates within the Sprint CDMA frequency band of 800 MHz/1.9 GHz. This device will not operate on any iDEN network. Coverage is not available everywhere. This product meets current FCC Radio Frequency Emission Exposure Guidelines. FCC Equipment Authorization ID number:Q78-ZTE3200 5. 31 7.2.2Federal Communications Commission Notice(FCC – United States) 7.2.3Iimitation of liability The information in this manual is subject to change without notice and does not represent a commitment on the part of ZTE Wireless. ZTE WIRELESS AND ITS AFFILIATES SPECCIFICLLY DIRECT, INDIRLAIM LIABLILITY FOR ANY AND ALL DIRECT, INSIRECT, SPECIAL, GENERAL, INCIDENTAL, CONSEQUENTIAL, PUNITVE OR EXEMPLARY DAMAGES INCLUDING, BUT NOT LIMITED TO, LOSS OF 5. 32 PROFITS OR REVENUE OR ANTICIPATED PROFITS OR REVENUE ARISING OUT OF THE USE OR INABILITY TO USE ANY ZTE WIRELESS PRODUCT, EVEN IF ZTE WIRELESS AND/OR ITS AFFILIATES HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR THEY ARE FORESEEABLE OR FOR CLAIMS BY ANY THIRD PARTY. Notwithstanding the foregoing, in no event shall ZTE Wireless and /or its affiliates aggregate liability arising under or in connection with the ZTE Wireless product, regardless of the number of events, occurrences, or claims giving rise to liability, be in excess of the price paid by the purchaser for the ZTE Wireless product. 7.2.4Additional Information and Updates For up-to-date product descriptions, documentation, application notes, firmware upgrades, troubleshooting tips, and press releases, visit www.sprint.com. 5. 33 7.3 Important Safety Information 7.3.1Important Notice Because of the nature of wireless communications, transmission and reception of data can never be guaranteed, Data may be delayed, corrupted (i.e., have errors), or be totally lost. Although significant delays or losses of data are rare when wireless devices such as the ZTE 3200 device are used in a normal manner with a well constructed network, they should not be used in situations where failure to transmit or receive data could result in damage of any kind to the user or nay other party, including but not limited to personal injury, death, or loss of property. SPRINT SPECTRUM L.P. accepts no responsibility for damages of any kind resulting from delays or errors in data transmitted or received using the ZTE 3200 device or for failure of the ZTE 3200 device to transmit or receive such data. 5. 34 7.3.2Safety and Hazards Do not operate the ZTE 3200 device in areas where blasting is in progress, where explosive atmospheres may be present, near medical equipment, life support equipment, or any equipment which may be susceptible to any form of radio interference. In such areas, the ZTE 3200 device MUST BE POWER OFF. It can transmit signals that could interfere with this equipment. Do not operate the ZTE 3200 device in any aircraft, whether the aircraft is on the ground or in flight. In aircraft, the ZTE 3200 device MUST BE POWERED OFF. When operating, it can transmit signals that could interfere with various onboard systems. The driver or operator of any vehicle should not operate the ZTE 3200device while in control of a vehicle. Doing so will detract from the driver or operator‟s control and operation of that vehicle. In some jurisdictions, operating such communications devices while in control of a vehicle is an offense. 5. 35 7.4 ZTE Wireless Limited Warranty and Liability ZTE Wireless warrants for the 12 month period immediately following receipt of the Product by Purchaser that the Product will be free from defects in material and workmanship under normal use. THESE WARRANTIES ARE EXPPESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPPESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. The exclusive remedy for a claim under this warranty shall be limited to the repair or replacement, at ZTE Wireless‟ option, of defective or non-conforming materials, parts or components. The foregoing warranties do not extend (I) non-conformities, defects or errors in the Products due to accident, abuse, misuse or negligent use of the Products or use in other than a normal and customary manner, environmental conditions not conforming to ZTE Wireless‟s specification, of failure to follow prescribed installation, operating and maintenance procedures, (II) defects, errors or 5. 36 nonconformity‟s in the Product due to modifications, alterations, additions or changes not made in accordance with ZTE Wireless‟ specifications or authorized by ZTE Wireless, (III) normal wear and tear, (Ⅳ) damage caused by force of nature or act of any third person, (Ⅴ) shipping damage, (Ⅵ) service or repair of Product by the purchaser without prior written consent from ZTE Wireless‟ (Ⅶ) products designated by ZTE Wireless as beta site test samples, experimental, developmental, reproduction, sample, incomplete or out of specification Products, or (Ⅷ) returned products if the original identification marks have been removed or altered. 7.5 Glossary DNS: Domain Name System, A system for converting host names and domain names into IP addresses on the Internet or on local networks that use the TCP/IP protocol. IP address: Internet Protocol address. The address of a device attached to an IP network (TCP/IP network). SSID: Service Set Identifier. The named assigned to a wireless Wi-Fi network. 5. 37 Wi-Fi: Wireless Fidelity. Refers to any system that uses the 802.11 standard, which was developed by the Institute of Electrical and Electronics Engineers (IEEE) and released in 1997. WLAN: WiFi . A typically low-power network that transmits a wireless signal over a span of a few hundred feet and usually only to stationary devices. TCP/IP: Transmission Control Protocol /Internet Protocol. A communications protocol developed under contract from the U.S Department of Defense to permit dissimilar systems to network. WEP: Wired Equivalent Privacy. An IEEE standard security protocol for 802.11 networks. Superseded by WPS and WPA2. WPA/WPA2: Wi-Fi Protected Access. A security protocol for wireless 802.11 networks from the Wi-Fi Alliance. 5. 38 7.6 FCC Regulations: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not 5. 39 occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user„s authority to operate the equipment. 5. 40 The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 5. 41 RF Exposure Information (SAR) This device meets the government‟s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard for wireless devices employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. Tests for SAR are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. This is because the device is designed to operate at multiple power levels so as to use only the poser required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. 5. 42 The highest SAR value for the model device as reported to the FCC when worn on the body, as described in this user guide, is 1.11 W/kg (Body-worn measurements differ among device models, depending upon available accessories and FCC requirements.) While there may be differences between the SAR levels of various devices and at various positions, they all meet the government requirement. The FCC has granted an Equipment Authorization for this model device with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model device is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching on FCC ID: Q78-ZTE3200. 5. 43 For body worn operation, this device has been tested and meets the FCC RF exposure guidelines for use with an accessory that contains no metal and the positions the handset a minimum of 1.5 1.0 cm from the body. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. The County Code Selection feature is disabled for products marketed in the US/Canada. For product available in the USA/ Canada markets, only channel 1~11 can be operated. Selection of other channels is not possible. 5. 44
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V2.3 (128-bit) User Access : Print, Extract, Print high-res Author : usermt Create Date : 2010:10:28 20:32:29+08:00 Modify Date : 2010:10:28 20:32:29+08:00 Subject : Has XFA : No Language : zh-TW Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Format : application/pdf Creator : usermt Title : 1 Creator Tool : Microsoft® Office Word 2007 Metadata Date : 2010:10:28 20:32:29+08:00 Producer : Microsoft® Office Word 2007 Document ID : uuid:1815220c-e448-41c0-b5fa-f3b745d83f3b Instance ID : uuid:9924c22a-fe9a-4db3-89a1-1756749031eb Page Count : 50EXIF Metadata provided by EXIF.tools