ZTE ZTEA316GPLUS GSM Dual Band Digital Mobile Phone User Manual Exhibit09 user manual

ZTE Corporation GSM Dual Band Digital Mobile Phone Exhibit09 user manual

user manual

1 Legal Information Copyright © 2009 ZTE CORPORATION All Rights Reserved Your mobile phone is made by ZTE CORPORATION. No part of this manual may be reproduced or transmitted in any form or by any means without prior written consent of ZTE CORPORATION. Trademarks ZTE and the ZTE logos are trademarks of ZTE CORPORATION. Notice The information in this manual is subject to change without notice. Every effort has been made in the preparation of this manual to ensure accuracy of the contents, but all statements, information, and recommendations in this manual do not constitute a warranty of any kind, expressed or implied. Please read the safety precautions carefully to ensure the correct and safe use of your mobile phone. For detailed information, refer to the section “Safety Precautions”. ZTE CORPORATION Address: ZTE Plaza, Keji Road South, Hi-tech Industrial Park, Nanshan District, Shenzhen, P. R. China Postal Code: 518057 Website: http://www.zte.com.cn Release: V1.0.0
2 Security  To protect your mobile phone from illegal use, take the security measures as follows: ¾ Set PIN codes of the SIM card. ¾ Set handset lock code. ¾ Set call restrictions. Safety Precautions This section includes some important information on safe and efficient operation. Please read this information before using the phone. Operational Precautions  Please use your phone properly. When making or receiving a call, please hold your phone as holding a wireline telephone. Make sure that the phone is at least one inch (about two point five centimeters) from your body when transmitting.  Do not touch the antenna when the phone is in use. Touching the antenna area affects call quality and may cause the phone to operate at a higher power level than needed.  Some people may be susceptible to epileptic seizures or blackouts when exposed to flashing lights, such as when watching television or playing video games. If you have experienced seizures or blackouts, or if you have a family history of such occurrences, please consult your doctor before playing video games on your phone or enabling a flashing-light feature on your phone. (The flashing-light feature is not available on all products.)
3  Keep the phone out of the reach of small children. The phone may cause injury if used as a toy.  Changes or modifications not expressly approved by the ZTE could void the user’s authority to operate the equipment. Precautions While Driving  Please pay attention to the traffic safety. Check the laws and regulations on the use of your phone in the area where you drive. Always obey them.  Use hands-free function of the phone, if available.  Pull off the road and park before making or answering a call if conditions require. Precautions for Medical Devices and Facilities  When using your phone near pacemakers, please always keep the phone more than eight inches (about twenty centimeters) from the pacemaker when the phone is switched on. Do not carry the phone in the breast pocket. Use the ear opposite the pacemaker to minimize the potential for interference. Switch off the phone immediately if necessary.  Some phones may interfere with some hearing aids. In the event of such interference, you may consult your hearing aids manufacturer to discuss alternatives.  If you use any other personal medical device, please consult the manufacturer of your device to determine if it is adequately shielded from RF energy.  In those facilities with special demand, such as hospital or health care facilities, please pay attention to the restriction
4 on the use of mobile phone. Switch off your phone if required. Mobile Phone  Please use original accessories or accessories approved by the phone manufacturer. Using any unauthorized accessories may affect your mobile phone’s performance, damage your phone or even cause danger to your body and violate related local regulations about telecom terminals.  Turn off your phone before you clean it. Use a damp or anti-static cloth to clean the phone. Do not use a dry cloth or electrostatically charged cloth. Do not use chemical or abrasive cleaners as these could damage the phone.  As your mobile phone can produce electromagnetic field, do not place it near magnetic items such as computer disks.  Using the phone near electrical appliances such as TV, telephone, radio and personal computer can cause interference.  Do not expose your mobile phone to direct sunlight or store it in hot areas. High temperatures can shorten the life of electronic devices.  Keep your phone dry. Any liquid may damage your phone.  Do not drop, knock or harshly treat the phone. Rough handling can break internal circuit boards.  Do not connect the phone with any incompatible enhancement.
5  Do not attempt to disassemble the mobile phone or battery.  Do not store the phone with flammable or explosive articles.  Do not charge the mobile phone without battery. Precautions for Potentially Explosive Atmospheres  Switch off your phone prior to entering any area with potentially explosive atmospheres, such as fueling areas, fuel or chemical transfer or storage facilities.  Do not remove, install, or charge batteries in such areas. Spark in a potentially explosive atmosphere can cause an explosion or fire resulting in bodily injury or even death.  To avoid possible interference with blasting operations, switch off your phone when you are near electrical blasting caps, in a blasting area, or in areas posted “Turn off electronic devices.” Obey all signs and instructions. Radio Frequency (RF) Energy This model phone meets the government’s requirements for exposure to radio waves. This phone is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government:
6  The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. *Tests for SAR are conducted using standard operating positions accepted by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the poser required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output.  The highest SAR value for the model phone as reported to the FCC when tested for use at the ear is 1.32 W/kg and when worn on the body, as described in this user guide, is 1.13 W/kg (Body-worn measurements differ among phone models, depending upon available enhancements and FCC requirements.)  While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement.
7  The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching on FCC ID: Q78-ZTEA316GPLUS  For body worn operation, this phone has been tested and meets the FCC RF exposure guidelines for use with an accessory that contains no metal and the positions the handset a minimum of 1.5 cm from the body. Use of other enhancements may not ensure compliance with FCC RF exposure guidelines. If you do no t use a body-worn accessory and are not holding the phone at the ear, position the handset a minimum of 1.5 cm from your body when the phone is switched on. Precautions for Electronic Devices  Some electronic devices are susceptible to electromagnetic interference sent by mobile phone if inadequately shielded, such as electronic system of vehicles. Please consult the manufacturer of the device before using the phone if necessary. Safety and General Use in Vehicles  Safety airbag, brake, speed control system and oil eject
8 system shouldn’t be affected by wireless transmission. If you do meet problems above, please contact your automobile provider. Do not place your phone in the area over an airbag or in the airbag deployment area. Airbags inflate with great force. If a phone is placed in the airbag deployment area and the airbag inflates, the phone may be propelled with great force and cause serious injury to occupants of the vehicle.  Please turn off your mobile phone at a refueling point, and the same to the place where the use of two-way radio is prohibited. Aircraft Safety  Please turn off your mobile phone before the airplane takes off. In order to protect airplane’s communication system from interference, it is forbidden to use mobile phone in flight. Safety regulations require you to have permission from a crew member to use your phone while the plane is on the ground.  If the mobile phone has the function of automatic timing power-on, please check your alarm setting to make sure that your phone will not be automatically turned on during flight. Battery Use  Do not short-circuit the battery, as this can cause the unit to overheat or ignite.  Do not store battery in hot areas or throw it into fire. Otherwise, it will cause explosion.  Do not disassemble or refit the battery. Otherwise, it will cause liquid leakage, overheating, explosion and ignition
9 of the battery.  Please store the battery in a cool dry place if you don’t use it for a long period.  The battery can be recharged for hundreds of times, but it will eventually wear out. When the operating time (talk time and standby time) is noticeably shorter than normal, it is time to replace it with a new one.  Please stop using the charger and battery when they are damaged or show evidence of aging.  Return the worn-out battery to the provider or dispose of it in accordance with environment regulations. Do not dispose of it in household rubbish.  Please use original batteries or batteries approved by the phone manufacturer. Using any unauthorized battery may affect your handset performance or may cause danger of explosion, etc. Warning: If the battery is damaged, do not discharge it. If the leakage does come into contact with the eyes or skin, wash thoroughly in clean water and consult a doctor. FCC compliance  This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference.  NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
10 equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/ TV technician for help. Limitation of Liability ZTE shall not be liable for any loss of profits or indirect, special, incidental or consequential damages resulting from or arising out of or in connection with using this product, whether or not ZTE had been advised, knew or should have known the possibility of such damages. The user should refer to the enclosed warranty card for full warranty and service information. Note: The pictures and icons shown in the manual are just schematic drawings for function demonstration. If they are inconsistent with your handset, please take your handset as the standard. If the inconsistency exits in the manual because of the
11 handset function updating, please refer to the follow-up public information from ZTE CORPORATION.
12 Key Functions Function Description Left soft key Perform the function indicated at the left bottom of the screen. Right soft key Perform the function indicated at the right bottom of the screen. Centre key Confirm actions and make selections. 4-Way Navigation KeyThese keys (UP, DOWN, LEFT and RIGHT) allow for navigation through menu options and quick accessing to some function menus. You can customize the fastkey settings of 4-Way Navigation Key in standby mode. Send key Dial a phone number or answer a call, or view the history of calls dialled, received and missed. End/Power key Press End key to exit to standby mode. Alpha numeric keys Enter characters 0-9 and the alphabets from a-z. Note: In this User Manual, “press a key” means to press the key and release it, while “hold a key” means to keep pressing the key. Hold * key to turn on/off the torchlight in the standby mode. To lock/unlock the keypad, press # key and then press * key.
13 Interface icons Icon Description Icon Description Signal strength Headset Vibration New message Keypad locked Silent mode Alarm clock set Battery status Battery The lithium ion battery of the mobile phone can be immediately used after unpacking. A new battery performs best after three complete charge/discharge cycles. Installing the battery 1. Insert the battery by aligning the gold-colored contacts with the contacts in the battery slot. 2. Push down on the upper section of the battery until it clicks into place. 3. Replace the battery cover and close it gently until you hear a click. Pull down the battery Close the cover until you hear a click
14 Removing the battery 1. Make sure that your mobile phone is switched off. 2. Remove the battery cover. 3. Pull the battery up and remove it from the mobile phone. Open the cover Pull up the battery from here How to insert the SIM card You want a mobile phone that is sophisticated yet easy to use and here it is in your hands! Naturally you are eager to start using it, but first you need to insert the SIM card. Insert the SIM card as follows: • Make sure that the phone is switched off and the charger is disconnected from the phone. • Turn the phone over and remove the back cover. • If the battery is already installed, remove it! • Hold your SIM card with the cut corner oriented as shown and then slide it into the card holder facing downward. • Replace the battery first. • Replace the back cover.
15 Insert the SIM card Pull out the SIM card What is a SIM card? Every mobile phone has a SIM card (Subscriber Identity Module). This is a micro-chip that holds your personal information such as names and phone numbers. Your phone won’t work without it. If you already have contacts on your SIM card, they can be transferred in most cases. How to charge the battery Your phone is powered by a rechargeable battery. For maximum battery performance, it is recommended that you completely charge the battery before using the phone for the first time. A new battery’s full performance is achieved only after three complete charge and discharge cycles. • Connect your travel adapter to the side of your mobile phone as shown in the diagram. Note: The side with arrow should be upright while connecting. • Connect the other end of the travel adapter to the mains socket. • If you charge the battery when the phone is switched off, the battery indicator appears with the bars moving from right to left. If you
16 charge the battery when the phone is switched on, the battery indicator appears with a lightning strike. • When the battery is fully charged, disconnect the charger. Power on/ off your phone Make sure that your SIM card is in your mobile phone and that the battery is charged. Please hold End key to power on/off the phone. The phone will automatically search for the network. Writing text • Change input mode: Press # key to change the input mode (input modes: Eng, *Abc, abc, ABC and 123). • Input Letters: In *Abc/abc/ABC mode, press the corresponding letter key till the letter appears. • Input Words: In Eng mode, key in any letter with a single key press. Press each key only once for every letter. The word changes after each key stroke. When you have finished writing the word and it is correct, confirm it by pressing 0 key or Centre key. Pressing Insert
17 a Navigation key moves the cursor. Predictive text input is based on a built-in dictionary. • Input Digits: In 123 mode, press digit key once to key in a digit. In Eng mode, press the digit key, and select the number by pressing a Navigation key. In *Abc/abc/ABC mode, constantly press the digit key until the number appears. • Input Symbol: Press * key to enter a symbol. In *Abc/abc/ABC mode, constantly press 1 key till the required symbol (common symbols) appears. • Selecting Template: Hold * key to open Templates. Select the required template. • Input Space: Press 0 key to input space. It does not work in 123 mode. • Delete Character: Press Right soft key to clear a character. Press and hold Right soft key to delete all characters and clear the display. • Move Cursor to Left or Right: Press Left/Right navigation keys to move the cursor to left or right. *Note: Abc mode is only available for certain models. How do I add people to my Contacts There are some numbers that you may want to call again and again, so it makes sense to add these numbers to your contact list. You can then access these numbers quickly and easily. • Enter Contacts menu. • Press Left soft key [Options], and then select Add new contact.
18 • Select to save the number to SIM card or Phone, and then enter the contact’s phone number. • Press Left soft key [OK] or Centre key, then enter a name and confirm by clicking Left soft key [OK] or Centre key again. • You can also save a number right after you’ve made or received a phone call or a text message from someone who is not yet in your contact list. • To delete someone from your contact list, first select the name, then press Left soft key [Options] and choose Delete. How to make and receive calls The most basic way to make a call is to key in the number in the standby mode and press Send key. One advantage of a mobile phone is that you can also store people’s names and numbers in your mobile contact list and call them more easily. • To call someone: Enter Contacts menu. Use the Up/Down keys to find the name of the person you want to call. You can also type in the first letter of the name of the person you want to call, and press Send key. • To receive a call, press Send key. • To end a call, press End key. Make sure that you are in an area with sufficient coverage to make calls. The strength of the network signal is indicated on the left top of the screen. How to send and receive messages You can use your mobile phone to send and receive text messages.
19 1. Go to Menu→Messaging→New message. 2. Write your message. For more information on writing, see section ‘Writing text’. 3. Press Left soft key [Options] and select Send to one to send the message to one person. To send to more than one person, select Send to contacts and select the names from the contact list. Select Send and save to send the message and save it to Sent folder. Select Save as draft to save it to Draftbox. 4. Enter the recipient’s phone number or select from Contacts. Then select OK to send the message. Upon receiving a message, the mobile phone indicates with ringtone, prompt, or a new message icon. 1. Press Left soft key [Select] to open the new message. You can also go to Inbox to read the message. 2. Use Up/Down keys to read the message. 3. While the message is open, use Left soft key [Options] to reply, delete, or forward the message. You can also call back to the sender or extract the sender’s number. How to set your phone You can adjust various settings of your phone. • Phone settings: Select language, edit your own phone number, set fastkey and select to turn on/off the automatic keypad locking function. • Display settings: Select your favorite wallpaper and adjust the
20 screen’s contrast and brightness. • Clock settings: Set date and time, and date format. • Security settings: Security features protect you from illegal use of your phone and SIM card. Note: You need to input the handset lock code to enter the security settings interface. The default lock code is 1234. How to set your alarm • Set alarm: Select Set alarm submenu, you can set the corresponding features of the alarm according to instructions: alarm type (if required), date, time, and ringtone. • List alarms: Select List alarms submenu, you can view, edit and delete the alarm clocks settings. You can also enable or disable the alarms. • Clear all: Select Clear all to clear all the alarm clocks. • Define rest day: Select Define rest day to set or change rest days within a week. Workday alarm will not ring on the defined rest day(s). *WAP The WAP browser feature on your phone allows you to view internet content. Note: Only WAP website is supported. • You can view the homepage when it has been set or input the website address to view the web pages. • The current website addresses can be saved as bookmarks on your phone.
21 • You can set the features of WAP browser. • You can check the previously viewed web addresses and GPRS information. *FM Radio With the radio, you can search for radio channels, listen to them, and save them on your device. Note that the quality of the radio broadcast depends on the coverage of the radio station in that particular area. The wired headset works as an antenna, so always connect the headset when using the radio. When you receive an incoming call while listening to the radio, the radio will be turned off. To scan for channels, select Options→Scan, and press Select to start auto searching. To adjust the volume, press the Up/Down keys. To tune channels manually, press the Left/Right keys. To save the current channel, select Options→Save channel. To view the saved channels list, select Options→Stored channels. To set the channels manually, select Options→Set frequency; input a valid frequency until “OK” is displayed. * Note: WAP and FM radio are only available for certain models.

Navigation menu