ZTE ZTEB2016 LTE/WCDMA/GSM (GPRS) Dual-Mode Digital Mobile Phone User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2964219
Application ID	ECNlx31vnTTTT9+NoGwzIA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	29.44kB (367996 bits)
Date Submitted	2016-04-20 00:00:00
Date Available	2016-04-20 00:00:00
Creation Date	2016-03-14 17:01:34
Producing Software	Acrobat Distiller 10.1.0 (Windows)
Document Lastmod	2016-03-14 17:01:34
Document Title	Microsoft Word - P839A02 ZTE B2016 Quick Start Guide_Single SIM For Mexico_V1.0
Document Creator	PScript5.dll Version 5.2.2
Document Author:	ls

ZTE B2016
Quick Start Guide
LEGAL INFORMATION
Copyright © 2015 ZTE CORPORATION.
All rights reserved.
No part of this publication may be quoted, reproduced, translated or
used in any form or by any means, electronic or mechanical, including
photocopying and microfilm, without the prior written permission of ZTE
Corporation.
ZTE Corporation reserves the right to make modifications on print errors or
update specifications in this guide without prior notice.
Notice
ZTE Corporation reserves the right to make modifications on print errors or
update specifications in this guide without prior notice.
We offer self-service for our smart terminal device users. Please visit the
ZTE official website (at www.ztedevice.com) for more information on
self-service and supported product models. Information on the website
takes precedence.
Disclaimer
ZTE Corporation expressly disclaims any liability for faults and damages
caused by unauthorized modifications of the software.
Images and screenshots used in this guide may differ from the actual
product. Content in this guide may differ from the actual product or
software.
Trademarks
ZTE and the ZTE logos are trademarks of the ZTE Corporation. Google
and Android are trademarks of Google, Inc. The Bluetooth® trademark
and logos are owned by the Bluetooth SIG, Inc. and any use of such
trademarks by ZTE Corporation is under license.
microSDHC Logo is a trademark of SD-3C, LLC.
Qualcomm® Snapdragon™ processors are products of Qualcomm
Technologies, Inc.
Qualcomm and Snapdragon are trademarks of Qualcomm Incorporated,
registered in the United States and other countries. Used with
permission.
License Notice and Trademark Acknowledgment Required for Licensed
Products.
Manufactured under license from Dolby Laboratories. Dolby, Dolby
Audio, and the double-D symbol are trademarks of Dolby Laboratories.
Other trademarks and trade names are the property of their respective
owners.
We offer self-service for our smart terminal device users. Please visit the
ZTE official website (at www.ztedevice.com) for more information on
self-service and supported product models. Information on the website
takes precedence.
Visit http://www.ztedevice.com to download the user manual. Just click
Support > Manuals from the home page and then select your location,
product type, and name to search for related support information.
Version No.: R1.0
Edition Time : Dec 11, 2015
Manual No. : 07958450xxxx
Produ
uct Safety
y Informa
ation
Don’t make or receive phone calls while driving.
Never text wh
hile
driving.
F body-worn opera
For
ations, maintain a sep
paration of 10 mm.
Small
parts may causse choking.
Your
phone can prod
duce a loud sound.
To prevent possible hearing
damage, do not listen at high volu
ume
levels for long periods.
Avoid
contact with an
nything magnetic.
Keep
away from pace
emakers and other electronic
medical devices.
Turn
off when asked to in hospitals and medical
facilities.
Turn
off when told to on aircraft and at airrport.
Turn
off when near explosive materials orr liquids.
Don’t
use at gas stations.
Your phone may produce a bright or flashing light.
Don’t dispose of your phone in fire.
Avoid extreme temperatures.
Avoid contact with liquids. Keep your phone dry.
Do not attempt to disassemble your phone.
Only use approved accessories.
Don’t rely on your phone as a primary device for emergency
communications.
Gettin
ng to Kno
ow Your P
Phone
arpiece
Ea
dset jack
3.5mm Head
Proximity & Light
sensor
Front camera
nano-UIM / nano-SIM/
microSDHC card slot
Indica
ator light
Volu
ume key
Power key
Touch
h screen
Micro
ophone
Speaker
Charging / USB
jack
B
Back
camera
Flash
Fingerprint
scanne
er
Beforre Getting
g Started
Installing the
t nano-UIM / nano-SIM / microSDHC Card
Power off your
phone before installing
or removin
ng the nano-UIM /
nano-SIM or
o microSDHC card
d.
1. Insert th
he tip of the tray eje
ect tool into the hole
e on the nano-UIM /
nano-SIIM card tray or micrroSDHC card tray.
2. Pull out the nano-UIM / nan
no-SIM card tray orr microSDHC card tray
and
he nano-UIM / nano
o-SIM card or micro
oSDHC card on the tray, as
place th
shown. Then carefully insta
all the tray back.
CAUTIO
ON:
To avoid dam
mage to the phone, please do not use other
kinds of nano-UIM /
nano-SIM cards, and do not use
e a non-standard na
ano-UIM / nano-SIM
M/
m a (U)SIM card. Yo
ou can get the stand
dard nano-UIM /
card cut from
nano-SIM / card from your serviice provider.
Note：
Slot2 only supports microSDHC
C card.
Charging the Battery
Your phone’ss battery should havve enough power fo
or the phone to turn
n on,
find a signal, and make a few ca
alls. You should fully charge the batterry as
soon as posssible.
10
WAR
RNING!
Use only ZTE-approved charg
gers and cables. Th
he use of unapproved
our phone or cause the battery to explo
ode.
accessories could damage yo
ON:
CAUTIO
Do not change the built-in rech
hargeable battery in
n your phone by yourself.
ged by ZTE or ZTE
E authorised service
The batteryy can only be chang
provider.
1. Connecct the adapter to the
e charging jack. Enssure that the adapte
er is
inserted
d in the correct direcction.
2. Connecct the charger to a standard
AC power outlet.
3. Disconn
nect the charger wh
hen the battery is fu
ully charged.
11
NOTE
E:

If the battery is extremelyy low, you may be unable
to power on the
e even when it is be
eing charged. In this case, try again affter
phone
charg
ging the phone for at
a least 30 minutes. Contact customer
servicce if you still cannott power on the phon
ne after prolonged
charg
ging.

The battery
is not removvable, do not removve the rear cover
please
e.

Presss and hold the powe
er key for about 10 seconds to force th
he
mobile
e phone restart.
FCC Re
egulations
The 15.19 sta
atement is used. Th
hey should have ussed the one for
Licensed devvices: “This device complies with part 15 of the FCC Rule
es.
Operation is subject to the cond
dition that this devicce does not cause
harmful interfference.”
Any Changess or modifications not
n expressly appro
oved by the party
responsible for
f compliance coulld void the user's au
uthority to operate the
equipment.
Note: This eq
quipment has been tested and found to comply with the
limits for a Cllass B digital device
e, pursuant to part 15 of the FCC Rule
es.
These limits are
a designed to pro
ovide reasonable prrotection against
harmful interfference in a residen
ntial installation. Th
his equipment
generates usses and can radiate
e radio frequency en
nergy and, if not
12
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more
of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Specific Absorption Rate (SAR) information:
This wireless phone meets the government's requirements for exposure
to radio waves. The guidelines are based on standards that were
developed by independent scientific organizations through periodic and
thorough evaluation of scientific studies. The standards include a
substantial safety margin designed to assure the safety of all persons
regardless of age or health.
FCC RF Exposure Information and Statement The SAR limit of USA
(FCC) is 1.6 W/kg averaged over one gram of tissue. Device types:
Mobile Phone (FCC ID: SRQ-ZTEB2016) has also been tested against
this SAR limit. The highest SAR value reported under this standard
during product certification for use close to human Head is 0.82W/kg,
close to human body is 0.72W/kg. This device was tested for typical
13
body operations at 1.0cm from the body. The use of accessories that do
not satisfy these requirements may not comply with FCC RF exposure
requirements, and should be avoided.
Body-Worn Operation
This device was tested for typical body-worn operations. To comply with
RF exposure requirements, a minimum separation distance of 1.0 cm
must be maintained between the user’s body and the device, including
the antenna. Third-party belt-clips, holsters, and similar accessories
used by this device should not contain any metallic components. Body
accessories that do not meet these requirements may not comply with
RF exposure requirements and should be avoided. Use only the
supplied or an approved antenna.
FCC RF exposure information (SAR)
This device is designed and manufactured not to exceed the emission
limits for exposure to radio frequency (RF) energy set by the Federal
Communications Commission of the U.S. Government.
The exposure standard for wireless devices employs a unit of
measurement known as the Specific Absorption Rate, or SAR. The SAR
limit set by the FCC is 1.6 W/kg.
Although the SAR is determined at the highest certified power level, the
actual SAR level of the device while operating can be well below the
maximum value.
While there may be differences between the SAR levels of various
devices and at various positions, they all meet the government
requirements.
14
The FCC has granted an Equipment Authorization for this model device
with all reported SAR levels evaluated as in compliance with the FCC RF
exposure guidelines. SAR information on this model device is on file with
the FCC and can be found under the Display Grant section of
http://www.fcc.gov/oet/ea/fccid after searching on the FCC ID for your
device, which can be found on the back of the device.
15

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : ls
Create Date                     : 2016:03:14 17:01:34+08:00
Modify Date                     : 2016:03:14 17:01:34+08:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Creator Tool                    : PScript5.dll Version 5.2.2
Format                          : application/pdf
Title                           : Microsoft Word - P839A02 ZTE B2016 Quick Start Guide_Single SIM For Mexico_V1.0
Creator                         : ls
Producer                        : Acrobat Distiller 10.1.0 (Windows)
Document ID                     : uuid:3e2ace28-5fab-4a65-aa3b-499c3aabf900
Instance ID                     : uuid:84782b0d-37b1-48d3-a7a8-132102b50396
Page Count                      : 15

EXIF Metadata provided by EXIF.tools