ZTE ZTEB2016 LTE/WCDMA/GSM (GPRS) Dual-Mode Digital Mobile Phone User Manual

ZTE Corporation LTE/WCDMA/GSM (GPRS) Dual-Mode Digital Mobile Phone

Contents

User manual

1 ZTE B2016 Quick Start Guide
2 LEGAL INFORMATION Copyright © 2015 ZTE CORPORATION. All rights reserved. No part of this publication may be quoted, reproduced, translated or used in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE Corporation. ZTE Corporation reserves the right to make modifications on print errors or update specifications in this guide without prior notice. Notice ZTE Corporation reserves the right to make modifications on print errors or update specifications in this guide without prior notice. We offer self-service for our smart terminal device users. Please visit the ZTE official website (at www.ztedevice.com) for more information on self-service and supported product models. Information on the website takes precedence. Disclaimer ZTE Corporation expressly disclaims any liability for faults and damages caused by unauthorized modifications of the software. Images and screenshots used in this guide may differ from the actual product. Content in this guide may differ from the actual product or software.
3 Trademarks ZTE and the ZTE logos are trademarks of the ZTE Corporation. Google and Android are trademarks of Google, Inc. The Bluetooth® trademark and logos are owned by the Bluetooth SIG, Inc. and any use of such trademarks by ZTE Corporation is under license. microSDHC Logo is a trademark of SD-3C, LLC. Qualcomm® Snapdragon™ processors are products of Qualcomm Technologies, Inc. Qualcomm and Snapdragon are trademarks of Qualcomm Incorporated, registered in the United States and other countries. Used with permission. License Notice and Trademark Acknowledgment Required for Licensed Products. Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories. Other trademarks and trade names are the property of their respective owners. We offer self-service for our smart terminal device users. Please visit the ZTE official website (at www.ztedevice.com) for more information on self-service and supported product models. Information on the website takes precedence.
4 Visit http://www.ztedevice.com to download the user manual. Just click Support > Manuals from the home page and then select your location, product type, and name to search for related support information. Version No.: R1.0 Edition Time : Dec 11, 2015 Manual No. : 07958450xxxx
Produ Dd F S Y Tl A K T T T Duct SafetyDon’t make or receivdriving. For body-worn operaSmall parts may causYour phone can prodTo prevent possible hevels for long periodAvoid contact with anKeep away from paceTurn off when asked Turn off when told to Turn off when near eDon’t use at gas stat 5 y Informae phone calls while dations, maintain a sepse choking. duce a loud sound.hearing damage, do s. nything magnetic. emakers and other eto in hospitals and mon aircraft and at airxplosive materials orions. ation driving. Never text whparation of 10 mm.not listen at high voluelectronic medical demedical facilities. rport. r liquids. hile ume vices.
6 Your phone may produce a bright or flashing light. Don’t dispose of your phone in fire. Avoid extreme temperatures. Avoid contact with liquids. Keep your phone dry. Do not attempt to disassemble your phone. Only use approved accessories. Don’t rely on your phone as a primary device for emergency communications.
Gettin Front EaChargin jack VoluTouchMicroIndicang to Knocamera arpiece g / USB ume keyh screen ophone ator light 7 ow Your P Phone Proximity & sensor Power keynano-UIM / nmicroSDHCSpeaker 3.5mm HeadLight nano-SIM/ card slot dsetjack
8 FFBFingerprint scanneFlash Back camera er
BeforInstalling tPower off ynano-SIM o1. Insert thnano-SI2. Pull out place thshown. re Gettingthe nano-UIM / nayour phone before ior microSDHC cardhe tip of the tray ejeIM card tray or micrthe nano-UIM / nanhe nano-UIM / nanoThen carefully insta 9 g Startedno-SIM / microSDinstalling or removind. ect tool into the holeroSDHC card tray. no-SIM card tray oro-SIM card or microall the tray back. HC Card ng the nano-UIM / e on the nano-UIMr microSDHC card toSDHC card on the / tray and tray, as
CAUTIOTo avoid damnano-SIM cacard cut fromnano-SIM / c Note： Slot2 only su Charging Your phone’sfind a signal, soon as poss ON: mage to the phone, rds, and do not usem a (U)SIM card. Yoard from your servipports microSDHCthe Battery s battery should havand make a few casible. 10 please do not use oe a non-standard naou can get the standice provider. C card. ve enough power foalls. You should fullother kinds of nanoano-UIM / nano-SIMdard nano-UIM / or the phone to turny charge the batter-UIM / M / n on, ry as
WARUse only Zaccessorie CAUTIODo not chaThe batteryprovider. 1. Connecinserted 2. Connec3. Disconn RNING! TE-approved chargs could damage yoON: nge the built-in rechy can only be changct the adapter to thed in the correct direcct the charger to a snect the charger wh 11 gers and cables. Thour phone or cause hargeable battery inged by ZTE or ZTEe charging jack. Ensction. standard AC power hen the battery is fuhe use of unapprovthe battery to explon your phone by yoE authorised servicesure that the adapteoutlet. ully charged. ed ode. urself. e er is
NOTE If the phonechargserviccharg The bplease Pressmobile FCC ReThe 15.19 staLicensed devOperation is harmful interfAny Changesresponsible fequipment. Note: This eqlimits for a ClThese limits aharmful interfgenerates usE: battery is extremelye even when it is beging the phone for ace if you still cannotging. battery is not remove. s and hold the powee phone restart. egulationsatement is used. Thvices: “This device subject to the condference.” s or modifications nfor compliance coulquipment has been lass B digital deviceare designed to proference in a residenses and can radiate12 y low, you may be ueing charged. In thiat least 30 minutes. t power on the phonvable, do not remover key for about 10 s hey should have uscomplies with part dition that this devicnot expressly approld void the user's autested and found te, pursuant to part ovide reasonable prntial installation. The radio frequency enunable to power on s case, try again afContact customer ne after prolonged ve the rear cover seconds to force thsed the one for 15 of the FCC Rulece does not cause oved by the party uthority to operate to comply with the 15 of the FCC Rulerotection against his equipment nergy and, if not the fter he es. the es.
13 installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. Specific Absorption Rate (SAR) information: This wireless phone meets the government's requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. FCC RF Exposure Information and Statement The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types: Mobile Phone (FCC ID: SRQ-ZTEB2016) has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for use close to human Head is 0.82W/kg, close to human body is 0.72W/kg. This device was tested for typical
14 body operations at 1.0cm from the body. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. Body-Worn Operation This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 1.0 cm must be maintained between the user’s body and the device, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna. FCC RF exposure information (SAR) This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard for wireless devices employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. Although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. While there may be differences between the SAR levels of various devices and at various positions, they all meet the government requirements.
15 The FCC has granted an Equipment Authorization for this model device with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model device is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/ea/fccid after searching on the FCC ID for your device, which can be found on the back of the device.

Navigation menu