ZTE ZTEBLADEA320A Mobile phone with GSM/GPRS/EDGE, WCDMA/HSPA FDD II/IV/V, LTE, Bluetooth, BLE User Manual

ZTE Corporation Mobile phone with GSM/GPRS/EDGE, WCDMA/HSPA FDD II/IV/V, LTE, Bluetooth, BLE

Contents

User Manual

1ZTE BLADE A320Quick Start Guide
2LEGAL INFORMATIONCopyright © 2017 ZTE CORPORATION.All rights reserved.No part of this publication may be quoted, reproduced,translated or used in any form or by any means, electronic ormechanical, including photocopying and microfilm, without theprior written permission of ZTE Corporation.NoticeZTE Corporation reserves the right to make modifications onprint errors or update specifications in this guide without priornotice.We offer self-service for our smart terminal device users.Please visit the ZTE official website (at www.ztedevice.com)for more information on self-service and supported productmodels. Information on the website takes precedence.DisclaimerZTE Corporation expressly disclaims any liability for faults anddamages caused by unauthorized modifications of thesoftware.Images and screenshots used in this guide may differ from theactual product. Content in this guide may differ from the actualproduct or software.TrademarksZTE and the ZTE logos are trademarks of ZTE Corporation.Google and Android are trademarks of Google, Inc.The Bluetooth®trademark and logos are owned by theBluetooth SIG, Inc. and any use of such trademarks by ZTECorporation is under license.microSDXC Logo is a trademark of SD-3C, LLC.Qualcomm®Snapdragon™ processors are products ofQualcomm Technologies, Inc.Qualcomm and Snapdragon are trademarks of QualcommIncorporated, registered in the United States and othercountries. Used with permission.Other trademarks and trade names are the property of theirrespective owners.Version No.: R1.0Edition Time : April 19, 2017Manual No.:
3Getting to Know Your PhoneEarpieceFront cameraProximity &light sensorIndicator lightBack keyRecent apps keyHome keyVolume keyPower keyHeadset jackBack cameraCharging/micro-USB jackMicrophoneFront flashTouch screenBack flashSpeaker
4Installing the micro-SIM Card and themicroSDXC Card (Optional)Power off your phone before removing or replacing the battery.Power off your phone before installing or removing themicro-SIM card.Power off your phone before installing or removing themicroSDXC card.WARNING!To avoid damage to the phone, do not use any other kind ofSIM cards, or any non-standard micro-SIM card cut from aSIM card. You can get a standard micro-SIM card from yourservice provider.1. Insert your fingernail into the slot at the bottom left of theback cover and lift it up gently.2. Hold the micro-SIM card with the cut corner oriented asshown and slide it into the card slot.3. Hold the microSDXC card (not included) with the cutcorner oriented as shown and slip it into the card slot.
54. Insert the battery by aligning the metal contacts on thebattery with the metal contacts in the battery compartment.Gently push down on the battery until it locks into place.5. Replace the back cover.Charging the PhoneYour phone’s battery should have enough power for the phoneto turn on, find a signal, and make a few calls. You should fullycharge the battery as soon as possible.WARNING!Use only ZTE-approved chargers and USB cables. The use ofunapproved accessories could damage your phone or causethe battery to explode.NOTE:If the battery is extremely low, you may be unable to power on
6the phone even when it is being charged. In this case, tryagain after charging the phone for at least 20 minutes. Contactthe customer service if you still cannot power on the phoneafter prolonged charging.
7Product Safety InformationDon’t make or receive phone calls while driving.Never text while driving.Keep your phone at least 10 mm away from yourbody while making calls.Small parts may cause choking.Your phone can produce a loud sound.To prevent possible hearing damage, do not listenat high volume levels for long periods.Avoid contact with anything magnetic.Keep away from pacemakers and other electronicmedical devices.Turn off when asked to in hospitals and medicalfacilities.Turn off when told to on aircraft and at airport.Turn off when near explosive materials or liquids.Don’t use at gas stations.Your phone may produce a bright or flashing light.Don’t dispose of your phone in fire.Avoid extreme temperatures.Avoid contact with liquids. Keep your phone dry.Do not attempt to disassemble your phone.Only use approved accessories.Don’t rely on your phone as a primary device foremergency communications.
8FCC RF Exposure Information (SAR)This phone is designed and manufactured not to exceed theemission limits for exposure to radio frequency (RF) energyset by the Federal Communications Commission of the UnitedStates.During SAR testing, this device was set to transmit at itshighest certified power level in all tested frequency bands, andplaced in positions that simulate RF exposure in usageagainst the head with no separation, and near the body withthe separation of 10 mm. Although the SAR is determined atthe highest certified power level, the actual SAR level of thedevice while operating can be well below the maximum value.This is because the phone is designed to operate at multiplepower levels so as to use only the power required to reach thenetwork. In general, the closer you are to a wireless basestation antenna, the lower the power output.The exposure standard for wireless devices employing a unitof measurement is known as the Specific Absorption Rate, orSAR.The SAR limit set by the FCC is 1.6 W/kg.This device is complied with SAR for general population/uncontrolled exposure limits in ANSI/IEEE C95.1-1992 andhad been tested in accordance with the measurementmethods and procedures specified in IEEE1528.The FCC has granted an Equipment Authorization for thismodel phone with all reported SAR levels evaluated as incompliance with the FCC RF exposure guidelines. SARinformation on this model phone is on file with the FCC andcan be found under the Display Grant section of
9www.fcc.gov/oet/ea/fccid after searching on FCC ID:SRQ-ZTEBLADEA320A.For this device, the highest reported SAR value for usageagainst the head is 1.060 W/kg, for usage near the body is1.268W/kg.While there may be differences between the SAR levels ofvarious phones and at various positions, they all meet thegovernment requirements.SAR compliance for body-worn operation is based on aseparation distance of 10 mm between the unit and the humanbody. Carry this device at least 10 mm away from your body toensure RF exposure level compliant or lower to the reportedlevel. To support bodyworn operation, choose the belt clips orholsters, which do not contain metallic components, tomaintain a separation of 10 mm between this device and yourbody.RF exposure compliance with any body-worn accessory,which contains metal, was not tested and certified, and usesuch body-worn accessory should be avoided.FCC RegulationsThis mobile phone complies with part 15 of the FCC Rules.Operation is subject to the following two conditions: (1) Thisdevice may not cause harmful interference, and (2) this devicemust accept any interference received, including interferencethat may cause undesired operation.This mobile phone has been tested and found to comply withthe limits for a Class B digital device, pursuant to Part 15 ofthe FCC Rules.These limits are designed to providereasonable protection against harmful interference in a
10residential installation. This equipment generates, uses andcan radiate radio frequency energy and, if not installed andused in accordance with the instructions, may cause harmfulinterference to radio communications. However, there is noguarantee that interference will not occur in a particularinstallation. If this equipment does cause harmfulinterference to radio or television reception, which can bedetermined by turning the equipment off and on, the user isencouraged to try to correct the interference by one or more ofthe following measures:• Reorient or relocate the receiving antenna.•Increase the separation between the equipment andreceiver.•Connect the equipment into an outlet on a circuit differentfrom that to which the receiver is connected.•Consult the dealer or an experienced radio/TV technician forhelp.CAUTION: Changes or modifications not expresslyapproved by the party responsible for compliance could voidthe user’s authority to operate the equipment.The antenna(s) used for this transmitter must not beco-located or operating in conjunction with any other antennaor transmitter.

Navigation menu