ZTE ZTEL5PLUS WCDMA/GSM (GPRS) Dual-Mode Digital Mobile Phone User Manual

ZTE Corporation WCDMA/GSM (GPRS) Dual-Mode Digital Mobile Phone

User manual

1 ZTE Blade L5 Plus Mobile Phone Quick Start Guide
2 LEGAL INFORMATION Copyright © 2016 ZTE CORPORATION. All rights reserved. No part of this publication may be quoted, reproduced, translated or used in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE Corporation. Notice ZTE Corporation reserves the right to make modifications on print errors or update specifications in this guide without prior notice. We offer self-service for our smart terminal device users. Please visit the ZTE official website (at www.ztedevice.com) for more information on self-service and supported product models. Information on the website takes precedence.
3 Disclaimer ZTE Corporation expressly disclaims any liability for faults and damages caused by unauthorized modifications of the software. Images and screenshots used in this guide may differ from the actual product. Content in this guide may differ from the actual product or software. Trademarks ZTE and the ZTE logos are trademarks of the ZTE Corporation. Google and Android are trademarks of Google, Inc. The Bluetooth® trademark and logos are owned by the Bluetooth SIG, Inc.and any use of such trademarks by ZTE Corporation is under license. microSDHC Logois a trademark of SD-3C, LLC. Other trademarks and trade names are the property of their respective owners. Version No. : R1.0 Edition Time : 01.2016
Getting tThank you for Before you staPress the pow to Know Your choosing the ZTE Bart, let’s take a look awer button to turn on 4 r Phone Blade L5 Plus. at your new phone.or turn off the screenn.
InstaFollow thmicro-SIMpower on ①Open②InseNotes:SBefore insphone.If yodedicated whole sets lling the She instructions inM card. Then prn your phone.nthebatteryrt the micro-SIM card slot to stalling or replacingou're using a smacard sets from thes into the slot. 5 SIM cardn the figures beress and hold thcover.-SIM card/Sprevail in kindg the SIM card,beall card ,please bue formal channelslow to install yohe power buttonD card.e sure to turn off thy standardization s ,and then push tur n to he SIM he
Notes:SDSome appmay store that you kerandomly. Single SD card slot to prelications may recertain data on eep a SD card inSIM device 6 evail in kind equire a SD cardit. Therefore, it nstalled and not d to work normais recommenderemove or replaally or ed ace it
7  Dual SIM device
ChargYour phonephone to tushould fullyWARNINUse only Zunapprovethe battery CAUTIODo not remyour phoneZTE or ZT Produ DonphonNeve For mainmm. Smachokging the pe’s battery shouurn on, find a siy charge the baNG! ZTE-approved ced accessories cyto explode. ON: move or change e by yourself. TE authorised sect Safety’t make or receive ne calls while drivinger text while driving.body-worn operationntain a separation of . all parts may cause king. 8 phone.uld have enoughgnal, and makeattery as soon aschargers and cacould damage ythe built-in rechhe battery can oervice provider.y Informat. Don’t usens, 10This devbright orDon’t dish power for the e a few calls. Yos possible. bles. The use oyour phone or cahargeable batteonly be changedtion e at gas stations. vice may produce ar flashing light. pose of your phone iu of ause ery in d by a in fire.
Tha Avan Kepaele Tuhofa Tuair Tuexliq § 15.19 LabThe 15.19 sdevices: “Thsubject to th§15.21 InforAny Changefor complian his device may prodloud sound void contact with nything magnetic. eep away from acemakers and otherectronic medical devurn off when asked toospitals and medical cilities. urn off when told to orcraft and at airport.urn off when near xplosive materials or quids. beling requirements.statement is used. Thhis device complies whe condition that this rmation to user. es or modifications nnce could void the us 9 duce To prevdamagvolumeAvoid er vices.Avoid cyour pho in Do noton Only uDon’t rprimarycommuhey should have usedwith part 15 of the FCdevice does not cauot expressly approveser's authority to opevent possible hearingge, do not listen at hige levels for long perioextreme temperaturecontact with liquids. Khone dry. t attempt to disassemse approved accessorely on your phone asy device for emergenunications. d the one for LicenseCC Rules. Operation use harmful interferened by the party resporate the equipment. g gh ods. es. Keep mble. ories. s a ncy ed is nce.”§ onsible
10 § 15.105 Information to the user. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. Specific Absorption Rate (SAR) information: This wireless phone meets the government's requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. FCC RF Exposure Information and Statement The SAR limit of USA (FCC) is 1.6
11 W/kg averaged over one gram of tissue. Device (FCC ID: SRQ-ZTEL5PLUS) has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for use at the ear is 0.826W/kg and when properly worn on the body is 1.269W/kg. This device was tested for typical body-worn operations with the back of the handset kept 1.0cm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 1.0cm separation distance between the user's body and the back of the handset. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. Body-worn Operation This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 1.0 cm must be maintained between the user’s body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna Declaration of RoHS Compliance To minimize the environmental impacts and take more responsibilities to the earth we live on, this document shall serve as a formal declaration that the ZTE Blade L5 Plus manufactured by ZTE CORPORATION is in compliance with the Directive 2011/65/EU of the European Parliament - RoHS (Restriction of Hazardous
12 Substances) with respect to the following substances: 1. Lead (Pb) 2. Mercury (Hg) 3. Cadmium (Cd) 4. Hexavalent Chromium (Cr (VI)) 5. Polybrominated biphenyls (PBBs) 6. Polybrominated diphenyl ethers (PBDEs) The ZTE Blade L5 Plus manufactured by ZTE CORPORATION, meets the requirements of EU 2011/65/EU. Disposal of Your Old Appliance 1. When this crossed-out wheeled bin symbol is attached to a product, it means the product is covered by the European Directive 2012/19/EU. 2. All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by
13 the government or the local authorities. 3. The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health. For this product’s recycling information based on WEEE directive, please send an e-mail to weee@zte.com.cn

Navigation menu