ZTE ZTEMF50 WCDMA uFi Hot Spot User Manual ZTE AC30 MF30

ZTE Corporation WCDMA uFi Hot Spot ZTE AC30 MF30

Contents

MF50 user_manual_rev1

  ZTE MF50  Quick Guide        ZTE CORPORATION   NO. 55, Hi-tech Road South, ShenZhen, P.R.China   Postcode: 518057 Tel: +86-755-26779999   URL: http://www.zte.com.cn   E-mail: mobile@zte.com.cn
  LEGAL INFORMATION  Copyright © 2011 ZTE CORPORATION.  All rights reserved.  No part of this publication may be excerpted, reproduced, translated or utilized in any form or by any  means,  electronic  or  mechanical,  including  photocopying  and  microfilm,  without  the  prior written permission of ZTE Corporation.  The manual is published by ZTE Corporation. We reserve the right to make modifications on print errors or update specifications without prior notice.     Version No. : R1.0
 Confidential and Proprietary Information of ZTE CORPORATION 1    Quick Guide Introduction ZTE MF50 is a 3G mobile hotspot device, working in GPRS/EDGE/WCDMA/HSPA network. It provides Internet connection via USB or Wi-Fi to clients, enabling you to communicate anytime and anywhere.   Specification  Data Service HSPA:         DL 14.4 Mbps UL 5.76Mbps WCDMA CS: UL 64kbps/DL 64kbps WCDMA PS: UL 384kbps/DL 384kbps Interface USB and Wi-Fi Wi-Fi Standard 802.11b/g/11n Wi-Fi Security WEP/WPA/WPA2 USB Version USB 2.0 HIGH SPEED USB Interface Type Micro USB Weight 80g Dimensions (W×H×D): 101.8mm*51.8mm*13.65mm microSD card Support up to 32GB microSD card   Battery 1500mAh Li-ion battery *Standby time 100 hours *Working time 4 hours Charge time 3 hours Operate system Windows 7, Windows Vista, Windows XP (SP2 or later), Mac OS (10.4 or later) Web Browser IE (6.0 or later), Firefox (1.0 or later), Opera (6.0 or later), Safari (3.0 or later), Chrome (6.0 or later) Working temperature -10℃  ~ +45℃ Storage temperature -20℃  ~ +70℃ Charging temperature 0℃  ~ +40℃
  2 Confidential and Proprietary Information of ZTE CORPORATION Humidity 5%~ 95%     Notes: microSD    is a trademark of SD Card Association. The  device’s  standby  and  working  time  are  only  for  your  reference,  and  based  on  ideal  working environment. Getting to Know Your Device The following figure shows the appearance of the device. It is only for your reference. The actual device may be different.  Interface and Buttons 1.Power Hold the Power button to switch on/off the device. 2. Internet   Press to connect to or disconnect from the Internet.     Hold  for  about  five  seconds  to  change  between  manual  and  automatic connection. 3.WPS This  button  is  used  to  start  Wi-Fi  Protected  Setup  authentication  process  and enable/disable the Wi-Fi function.     Hold it for about five seconds to activate the WPS process.     Hold it for about two seconds to enable/disable Wi-Fi function. 4. LED Screen It is to indicate the signal type, signal strength, battery, Wi-Fi, etc. 5.Charger/USB port   Charge your device.   Connect the client to your device via USB cable.   Notes: • Press WPS and Power buttons simultaneously, and hold on about three seconds until all LEDs are off, then release the buttons, the device will restart automatically and restore to the factory default settings. • Please use the original external antenna if necessary.
  Confidential and Proprietary Information of ZTE CORPORATION 3    LED Indicator When  the  device  is  powered  on,  the  following  icons  will  appear  on  the  OLED  screen,  with  the corresponding indications listed in the table below: Icon Indication  Network signal strength.  Network type. 2G or 3G icon will appear on the OLED screen according to the network being connected.  Roaming network indication.  Connect to the Internet automatically.  Connect to the Internet manually.  Wi-Fi status and number of the connected users.  Battery power indication. .   Hardware Installation Inserting SIM Card, Memory Card and Battery 1. Use the thumb catch on the device to open the battery cover.  2. Insert SIM Card into the slot.
  4 Confidential and Proprietary Information of ZTE CORPORATION   Warning: Please power off the device and remove the external power adapter before removing or inserting the SIM card, if not, the device or SIM card may be damaged. 3. Insert the memory card into the memory card holder.  4. Insert the battery as shown with the contacts located against the gold springs.  5. Line the battery cover up correctly and press gently to close the case.
  Confidential and Proprietary Information of ZTE CORPORATION 5    Switching On/Off Your Device Press and hold the Power button to switch on/off the device.   Notes:   Please install battery before power on.   Charging Your Device  1. Insert the charger lead carefully with the correct orientation to the charger port. The plug only fits one way. Do not use excessive force to insert the plug. 2. Connect the charger to a mains socket. 3. Disconnect when the battery is fully charged.  Working Mode Your device supports three working modes. For the client, we only use PC or laptop as the example in this document.   USB Mode: Connect the device to your PC or laptop via the included USB cable, then power on your device. And the following picture is one application example:  Wi-Fi Mode: Power on directly, and then connect the device to your PC or laptop via Wi-Fi. And the following picture is one application example:
  6 Confidential and Proprietary Information of ZTE CORPORATION  Mixed Mode: Connect to the device with the above two connection methods. The following picture is the application example. All of the client devices can surf on the Internet at the same time.  Establish a connection between your device and the client Via USB Cable 1.Connect your device and the client with the USB cable. 2.Install software. After the installation, the connection between your device and the client will be established successfully a moment later. Via Wi-Fi 1.  Power on your device directly. It will take 1~2 minutes to initialize, and then Wi-Fi status icon will appear on the screen of your device. 2.  If the Wi-Fi status shown is  , hold the WPS key for about 2 seconds to enable the Wi-Fi function. 3.  Use your normal Wi-Fi application on the client to search the available wireless network.   Notes: You need to check your Wireless Network Connection. Set the client to obtain an IP address automatically in the Internet protocol (TCP/IP) properties, and the client will get an IP address like”192.168.0.101”. 4.  Select the SSID of your device, and then click Connect.
  Confidential and Proprietary Information of ZTE CORPORATION 7      Notes:   There will be a pop-up window to require the password. Please check the label on the battery compartment of your device to gain the SSID and preset password information. 5.  Wait a moment, the connection between your device and the client will be established successfully. Access the Internet 1. Switch on the device. 2. Establish a connection between your device and the client.   3. After successfully establishing the connection, access the Internet in the Always On or Manual mode. The default mode is Manual.   Notes: You can browse the WebGUI Configuration page and click WAN Connection to set the WAN connection mode. Access the WebGUI Configuration Page 1.  Make sure the connection between your device and the client is correct. 2.  Click    to Launch the internet browser.   Notes:   It is recommended that you use IE (6.0 or later), Firefox (1.0 or later), Opera (6.0 or later), Safari (3.0 or later), Chrome (6.0 or later) 3.The login page appears as follows.
  8 Confidential and Proprietary Information of ZTE CORPORATION    4.View the information of WAN, WLAN and Device. Input the case-sensitive default password “admin”, and then click Login to access the WebGUI Configuration page.   Notes: •Do not put anything on the top of your device. Do not lay devices to overlap each other when using. •The device takes 1~2 minutes to initialize, and attach to the network. PIN Code Verification If the PIN code of your SIM card is enabled, you will need to input the PIN code when you login at the first time.    Notes:   The SIM card will be locked if you enter wrong PIN code consecutively for three times. If you want to modify the PIN Status, please select Settings > Advanced > PIN Manage to do the actions.  Quick Setup After logging in, select Quick Settings, and then the Quick Settings wizard appears.
  Confidential and Proprietary Information of ZTE CORPORATION 9     The Quick Settings wizard guides you how to set the basic parameters for your device in the safest way. After this procedure, you can use your Internet service.   Notes: The parameter settings may have been preset by your service provider, and you will enjoy your Internet service directly. Please contact your service provider for details if you want to do some modification. WAN Connection After logging in, select WAN Connection, and you can choose the WAN Connection Mode according to your requirement.  Settings After logging in, select Settings, and you can do the following operations. Select Settings > 3G Settings View the 3G Wireless Information, select Band Selection Mode or change APN Setting. Select Settings > Wi-Fi Settings View the current station list, change the basic wireless network settings, choose security mode and WPA type, and perform the WPS configuration. Select Settings > Firewall Set the Mac/IP/Port Filtering, Port Forwarding or the System Security configuration. Select Settings > Advanced View the current status of your device, change the Administrator Settings, restore factory defaults, manage PIN or set the LAN interface configuration.    Notes:   Make sure that you can remember the new password if you change the login password by selecting Settings > Advanced > Management. Please restore the device to the factory default settings in case you forget the new password. Disconnect from the Internet 1.Log in the WebGUI Configuration page, and select WAN Connection. 2.Select Manual > Disconnect Internet. 3.Click Apply.
  10 Confidential and Proprietary Information of ZTE CORPORATION    Notes:   Turning off the device can also terminate the Internet connection. SMS This function allows you to view, send and receive short messages. After logging in, select SMS, and you can do the following operations. Select SMS > Device Operate the SMS in your device. Select SMS > SIM Card Operate the SMS in your SIM card. Select SMS > New Message Send or save SMS. Select SMS > SMS Settings Set the SMS configuration. PhoneBook This function allows you to store contacts to your device or SIM card. After logging in, select PhoneBook, and you can add a new contact by clicking the Add New tab, and perform operations to the contacts in the Local or SIM Card tab.  Usage of WPS If your client device supports WPS, you need not to input the password manually after WPS has been available. Please do the following:   1. Start up your device.   2. Launch the client device connected to your device.   3. Enable the WPS function of your device.   4. Enable the WPS function of the client. Notes: For the detailed operations about the client, please refer to the client’s instruction. Sleep Mode • After powering your device on without USB connection, once no user connects to the device within 10 minutes and no action is performed to the device, or the WPS button is pressed manually, the device will enter the sleeping mode with the screen off. In the sleeping mode, the
  Confidential and Proprietary Information of ZTE CORPORATION 11   Wi-Fi function will be disabled. • With USB connection, once no user connects to the device within 10 minutes and no action is performed to the device, or the WPS button is pressed manually, the Wi-Fi function will be disabled, and then unplug the USB cable, the device will enter the sleeping mode. In the sleeping mode, press any button or connect your device and PC with the USB cable to wake up the device, and the screen will be turned on. Warning and Notice To the Owner •  Some  electronic  devices  are  susceptible  to  electromagnetic  interference  sent  by  your  device  if inadequately shielded, such as the electronic system of vehicles. Please consult the manufacturer of your device before using if necessary. • Operating of laptop and desktop PCs and your device may interfere with medical devices like hearing aids  and  pacemakers.  Please  always  keep  them  more  than  20  centimeters  away  from  such  medical devices  when  they  are  turned  on.  Turn  your  device  off  if  necessary.  Consult  a  physician  or  the manufacturer of the medical device before using your device. • Be aware of the usage limitation when using your device at places such as oil warehouses or chemical factories, where there are explosive gases or explosive products being processed. Turn off your device if required. • The use of electronic transmitting devices is forbidden in aircrafts, at petrol stations and in hospitals. Please observe and obey all warning signs and switch off your device in these conditions. • Do not touch the inner antenna area if not necessary. Otherwise it will affect your device’s performance. • Store your device out of the reach of little children. Your device may cause injury if used as a toy. • Do not touch the metallic parts of your device so as to avoid a burn, when your device is working. Using Your Device • Please use original accessories or accessories that are authorized. Using any unauthorized accessories may affect your device’s performance, and violate related national regulations about telecom terminals. • Avoid  using  your  device  near  or  inside  metallic  structures  or  establishments  that  can  emit electromagnetic waves. Otherwise it may influence signal reception. • Your device is not waterproof. Please keep it dry and store in a shady and cool place. • Do not use your device immediately after a sudden temperature change. In such case, it will produce dew inside and outside your device, so don’t use it until it becomes dry. • Handle your device carefully. Do not drop, bend or strike it. Otherwise your device will be damaged. • No dismantling by non-professionals and only qualified technicians can undertake repair work. • Operating temperature range of 0℃  ~ +35℃  and humidity range of 5% ~ 95% are recommended. Using Battery • Do not short-circuit the battery, as this can cause excessive heat and fire. • Do not store battery in hot areas or dispose of it in a fire to avoid explosion. • Do not disassemble or modify the battery. • When not using the battery for a long period, remove it from the device and store it in a cool dry place.
  12 Confidential and Proprietary Information of ZTE CORPORATION • Never use any charger or battery damaged or worn out. • Return the wear-out battery to the provider or put  it  in the appointed recycle place. Do not put it in familial rubbish.   Warning: If the battery is broken, keep away from it. If it taints your skin, wash your skin with abundant fresh water and ask doctor help if necessary. Limited Warranty • This warranty does not apply to defects or errors in the Product caused by: i. Reasonable abrasion. ii. End User’s failure to follow ZTE’s installation, operation or maintenance instructions or procedures. iii. End  User’s  mishandling,  misuse,  negligence,  or  improper  installation,  disassembly,  storage, servicing or operation of the Product. iv. Modifications or repairs not made by ZTE or a ZTE-certified individual. v. Power failures, surges, fire, flood, accidents, actions of third parties  or  other events  outside ZTE’s reasonable control. vi. Usage of third-party products, or usage in conjunction with third-party products provided that such defects are due to the combined usage. vii. Any other cause beyond the range of normal usage intended for the Product. End User shall have no right to reject or return the Product, or receive a refund for the Product from ZTE under the above-mentioned situations.  • This warranty is End User’s sole remedy and ZTE’s sole liability for defective or nonconforming items, and is in lieu of all other warranties, expressed, implied or statutory, including but not limited to the implied  warranties of  merchantability  and  fitness  for  a  particular  purpose,  unless otherwise  required under the mandatory provisions of the law. Limitation of Liability ZTE shall not be liable for any loss of profits or indirect, special, incidental or consequential damages resulting from or arising out of or in connection with using of this product, whether or not ZTE had been advised, knew or should have known of the possibility of such damages, including, but not limited to lost profits, interruption of business, cost of capital, cost of substitute facilities or product, or any downtime cost.  FCC Compliance This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
  Confidential and Proprietary Information of ZTE CORPORATION 13   harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/ TV technician for help. Radio Frequency (RF) Energy This model device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government: The exposure standard for wireless devices employs a unit of measurement known as the Specific Absorption Rate, or SAR.    The SAR limit set by the FCC is 1.6W/kg. *Tests for SAR are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands.    Although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value.    This is because the device is designed to operate at multiple power levels so as to use only the poser required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. The highest SAR value for the model device as reported to the FCC when worn on the body, as described in this user guide, is 1.15 W/kg (Body-worn measurements differ among device models, depending upon available enhancements and FCC requirements.) While there may be differences between the SAR levels of various devices and at various positions, they all meet the government requirement. The FCC has granted an Equipment Authorization for this model device with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model device is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching on FCC ID: Q78-ZTEMF50. Body Worn Operation Important safety information regarding radio frequency radiation (RF) exposure: To ensure compliance with RF exposure guidelines the phone must be used with a minimum of 10 mm
  14 Confidential and Proprietary Information of ZTE CORPORATION separation from the body. Failure to observe these instructions could result in your RF exposure exceeding the relevant guideline limits.
  Confidential and Proprietary Information of ZTE CORPORATION 15    How to Get Help You can get Help by: • Sending E-mail to mobile@zte.com.cn • Visiting http://www.zte.com.cn • Calling Service Hotline: +86–755–26779999

Navigation menu