ZTE ZTEMF659 USB Modem User Manual Rev1

ZTE Corporation USB Modem Rev1

Contents

User Manual

  ZTEMF659 USB Modem Quick Guide       ZTE CORPORATION   NO. 55, Hi-tech Road South, ShenZhen, P.R.China         Postcode: 518057
  LEGAL INFORMATION  Copyright © 2011 ZTE CORPORATION.  All rights reserved.  No part of this publication may be excerpted, reproduced, translated or utilized in any form or by any  means,  electronic  or  mechanical,  including  photocopying  and  microfilm,  without  the  prior written permission of ZTE Corporation.  The manual is published by ZTE Corporation. We reserve the right to make modifications on print errors or update specifications without prior notice.     Version No. : R1.0   Date: Jan 2011   Manual NO.:079584500000
 Confidential and Proprietary Information of ZTE CORPORATION 1C h a p t e r   1  Quick Guide Introduction The  ZTE  USB  modem  is  a  multi-mode  USB  modem,  working  in HSUPA/HSDPA/WCDMA/EDGE/GPRS/GSM networks. With USB interface connecting to a laptop or a desktop PC, it integrates the functionality of a modem and a mobile phone (SMS), and combines mobile communication  with  Internet  perfectly.  It  supports  data  and  SMS  services  through  the  mobile  phone network, enabling you to communicate anytime and anywhere. Specification The following table shows the specification of your device. Interface Type  USB 2.0 HIGH SPEED Systems supported  Supports most types of laptop and desktop PC. Operating systems supported  Windows XP, Vista, Windows 7 MAC 10.4, 10.5, 10.6 Linux Functions  SMS service, Data service, Applications management, support microSD card, etc. Network Standards  HSUPA/HSDPA/WCDMA/EDGE/GPRS/GSM Transmission speed (Max)  HSUPA: 5.76 Mbps UL HSDPA: 14.4 Mbps DL Temperature  Storage: -40  ℃  ~ +80  ℃ Operation:-10  ℃  ~ +55  ℃ Dimension  87.1 mm×27 mm×12 mm microSD    capability  Support up to 32GB microSD card    Notes: microSD    is a trademark of SD Card Association.  Getting to know your device  The following figure shows the appearance of the MF659. It is only for your reference. The actual product may be different.
   MF659 Quick Guide 2 Confidential and Proprietary Information of ZTE CORPORATION  1. Front Cover 2. USB Connector 3. SIM/USIM card slot 4. microSD card slot Hardware Installation 1. Put finger on the bottom finger grip, and then lift the front cover of the modem to release and remove.      Notes: Do not open the front cover rudely so as to avoid the damage of the front cover.     2. Insert the SIM/USIM card into the SIM/USIM card slot. Insert the  SIM/USIM card with the metal contact area facing downwards into the slot, and then push SIM/USIM card as far as possible, shown as the following picture.    1 2 3 4
  MF659 Quick Guide  Confidential and Proprietary Information of ZTE CORPORATION 3   3. Insert the microSD card into the microSD card slot.   Notes: This modem only supports microSD card. Insert your microSD card into the microSD card slot, shown as the following picture.       4. Put the front cover of the modem flatly upon the body of modem. Direct the front cover towards the locking catches on the sides of the modem and push the front cover of the modem to lock the front cover into its place.   5. Connect the Modem to your laptop or desktop PC.  Plug the USB connector into your computer’s USB port and make sure that it is tightly inserted.    The OS automatically detects and recognizes new hardware and starts the installation wizard.
   MF659 Quick Guide 4 Confidential and Proprietary Information of ZTE CORPORATION Warning and Notice To the owner • Some electronic devices are susceptible to electromagnetic interference sent by modem if inadequately shielded, such as the electronic system of vehicles. Please consult the manufacturer of the device before using the modem if necessary. • Operating of  laptop and desktop  PCs and  the modem  may interfere  with medical  devices like hearing aids  and  pacemakers.  Please  always  keep  them  more  than  20  centimeters  away  from  such  medical devices  when  they  are  turned  on.  Turn  the  modem  off  if  necessary.  Consult  a  physician  or  the manufacturer of the medical device before using the modem. • Be  aware  of  the  usage  limitation  when  using  a  modem  at  places  such  as  oil  warehouses  or  chemical factories, where there are explosive gases or explosive products being processed. Turn off your modem if required. • The  use  of  electronic  transmitting  devices  is  forbidden in  aircrafts,  at  petrol  stations  and  in  hospitals. Please observe and obey all warning signs and switch off your modem in these conditions. • Do not touch the inner antenna area if not necessary. Otherwise it will affect your modem’s performance. • Store the modem out of the reach of little children. The modem may cause injury if used as a toy. • Do not touch the metallic parts of the modem so as to avoid a burn, when the modem is working. Using your USB Modem • Please  use  original  accessories  or  accessories  that  are  authorized.  Using  any unauthorized  accessories may affect your modem’s performance, and violate related national regulations about telecom terminals. • Avoid  using  the  modem  near  or  inside  metallic  structures  or  establishments  that  can  emit electromagnetic waves. Otherwise it may influence signal reception. • The modem is not waterproof. Please keep it dry and store in a shady and cool place. • Do not use the modem immediately after a sudden temperature change. In such case, it will produce dew inside and outside the modem, so don’t use it until it becomes dry. • Handle the modem carefully. Do not drop, bend or strike it. Otherwise the modem will be damaged. • No dismantling by non-professionals and only qualified technicians can undertake repair work. • Operating temperature range of -10℃  ~ +60℃  and humidity range of 5% ~ 95% are recommended. Limited Warranty • This warranty does not apply to defects or errors in the Product caused by: i. Reasonable abrasion. ii. End User’s failure to follow ZTE’s installation, operation or maintenance instructions or procedures. iii. End  User’s  mishandling,  misuse,  negligence,  or  improper  installation,  disassembly,  storage, servicing or operation of the Product. iv. Modifications or repairs not made by ZTE or a ZTE-certified individual. v. Power failures, surges, fire,  flood,  accidents,  actions of  third  parties or  other  events  outside ZTE’s reasonable control. vi. Usage of third-party products, or usage in conjunction with third-party products provided that such defects are due to the combined usage. vii. Any other cause beyond the range of normal usage intended for the Product. End User shall have no right to reject  or return the Product, or receive a refund for the Product from
  MF659 Quick Guide  Confidential and Proprietary Information of ZTE CORPORATION 5ZTE under the above-mentioned situations.  • This warranty is End User’s sole remedy and ZTE’s sole liability for defective or nonconforming items, and is in  lieu of  all  other warranties, expressed, implied or  statutory, including but  not limited  to the implied  warranties  of  merchantability  and  fitness  for  a  particular  purpose,  unless  otherwise  required under the mandatory provisions of the law. Limitation of Liability ZTE shall not be liable  for  any loss  of  profits or indirect,  special, incidental or  consequential  damages resulting from or arising out of or in connection with using of this product, whether or not ZTE had been advised, knew or should have known of the possibility of such damages, including, but not limited to lost profits, interruption of business, cost of capital, cost of substitute facilities or product, or any downtime cost. FCC Compliance  • This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1) This device may not cause harmful interference, and  (2) this device must accept any interference received, including interference that may cause undesired operation. • This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the  FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be  determined  by  turning  the  equipment  off  and  on,  the  user  is  encouraged  to  try  to  correct  the interference by one or more of the following measures:  Reorient or relocate the receiving antenna.  Increase the separation between the equipment and receiver.  Connect  the  equipment  into  an  outlet  on  a  circuit  different  from  that  to  which  the  receiver  is connected.  Consult the dealer or an experienced radio/TV technician for help. Changes or  modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment.  • The  antenna(s)  used  for  this  transmitter  must  not  be  co-located  or  operating  in  conjunction  with  any other antenna or transmitter. Radio Frequency (RF) Energy This model device meets the government’s requirements for exposure to radio waves. This  device  is  designed  and  manufactured  not  to  exceed  the  emission  limits  for  exposure  to  radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government: The  exposure  standard  for  wireless  devices  employs  a  unit  of  measurement  known  as  the  Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. *Tests for SAR are conducted using standard  operating  positions  accepted  by  the  FCC  with  the  device  transmitting  at  its  highest  certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. This is
   MF659 Quick Guide 6 Confidential and Proprietary Information of ZTE CORPORATION because the device is designed to operate at multiple power levels so as to use only the poser required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. The highest SAR value for the model device as reported to the FCC when worn on the body, as described in this user guide, is0.892W/kg (Body-worn measurements differ among device models, depending upon available enhancements and FCC requirements.) While there may be differences between the SAR levels of various devices and at various positions, they all meet the government requirement. The  FCC  has  granted  an  Equipment  Authorization  for  this  model  device  with  all  reported  SAR  levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model device is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching on FCC ID: Q78-ZTEMF659. For body worn operation, this modem has been tested and meets the FCC RF exposure guidelines for use with  an accessory that contains no metal  and the positions  the handset a  minimum  of  0.5  cm  from the body. Use of other enhancements may not ensure compliance with FCC RF exposure guidelines.   How to get help You can get Help by: • Clicking Help on the software. • Sending E-mail to mobile@zte.com.cn • Visiting http://www.zte.com.cn • Calling Service Hotline: +86–755–26779999

Navigation menu