ZTE ZTEMF667 HSPA+ USB Modem User Manual MF667 USB Modem V2 0

ZTE Corporation HSPA+ USB Modem MF667 USB Modem V2 0

MF667 USB Modem User Manual V2.0

Download: ZTE ZTEMF667 HSPA+ USB Modem User Manual MF667 USB Modem  V2 0
Mirror Download [FCC.gov]ZTE ZTEMF667 HSPA+ USB Modem User Manual MF667 USB Modem  V2 0
Document ID1708353
Application IDvuD7+gKsMJ+E9oR68NZL1A==
Document DescriptionMF667 USB Modem User Manual V2.0
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize112.11kB (1401343 bits)
Date Submitted2012-05-29 00:00:00
Date Available2012-05-29 00:00:00
Creation Date2012-04-27 09:35:39
Producing SoftwareAcrobat Distiller 7.0 (Windows)
Document Lastmod2012-04-27 09:35:39
Document TitleMicrosoft Word - MF667 USB Modem User Manual V2.0
Document CreatorPScript5.dll Version 5.2.2
Document Author: Administrator

MF667 USB Modem
User manual
ZTE CORPORATION
NO. 55, Hi-tech Road South, ShenZhen, P.R.China
Postcode: 518057
Tel: (86) 755 26779999
URL: http://www.zte.com.cn
E-mail: mobile@zte.com.cn
LEGAL INFORMATION
Copyright © 2010 ZTE CORPORATION.
All rights reserved.
No part of this publication may be excerpted, reproduced, translated or utilized in any form or by
any means, electronic or mechanical, including photocopying and microfilm, without the prior
written permission of ZTE Corporation.
The manual is published by ZTE Corporation. We reserve the right to make modifications on print
errors or update specifications without prior notice.
Version No. : R1.0
Edition Time :
Manual No. :
Contents
Quick Guide .......................................................................................................................... 1
Introduction ....................................................................................................................... 1
Specification...................................................................................................................... 1
Getting to know your device ............................................................................................. 2
Hardware Installation ........................................................................................................ 3
LED Lights........................................................................................................................ 5
Radio Frequency (RF) Energy .......................................................................................... 5
FCC Compliance ............................................................................................................... 6
How to get help ................................................................................................................. 6
Warning and Notice .............................................................................................................. 7
To the owner ..................................................................................................................... 7
Using your USB Modem .................................................................................................. 7
Limited Warranty .............................................................................................................. 8
Limitation of Liability ....................................................................................................... 9
Management Software ........................................................................................................ 10
System Requirements...................................................................................................... 10
Access the management software ................................................................................... 10
Interface Introduction .......................................................................................................... 13
Main Interface ................................................................................................................. 13
System information Icons ............................................................................................... 13
Access mobile network ....................................................................................................... 15
Set the Band Selection Mode .......................................................................................... 15
View the 3G and system information ............................................................................. 15
Surfing on the Internet ........................................................................................................ 17
Set APN parameters ........................................................................................................ 17
Set WAN Connection Mode ........................................................................................... 18
Connect to the Internet .................................................................................................... 19
View the Statistics........................................................................................................... 19
SMS..................................................................................................................................... 21
Set SMS parameters ........................................................................................................ 21
Send a new message ........................................................................................................ 22
Read Short Message ........................................................................................................ 22
SMS Operation Guide ..................................................................................................... 23
Phonebook........................................................................................................................... 25
Add a new contact ........................................................................................................... 25
Edit a contact ................................................................................................................... 25
Delete contacts ................................................................................................................ 26
Others .................................................................................................................................. 27
View Network Status ...................................................................................................... 27
Restore Factory Defaults ................................................................................................. 27
Enabling PIN Code ......................................................................................................... 28
Modifying PIN Code....................................................................................................... 28
USSD .............................................................................................................................. 29
STK ................................................................................................................................. 29
microSD Card ..................................................................................................................... 31
Use microSD Card .......................................................................................................... 31
Uninstall microSD Card .................................................................................................. 31
FAQ..................................................................................................................................... 33
1
Chapter
Quick Guide
Introduction
Thank you for using ZTE MF667 USB Modem.
To guarantee the modem always in its best condition, please read this manual carefully and keep
it for further use.
The pictures, symbols and contents in this manual are just for your reference. They might not be
completely identical with your modem. We operate a policy of continuous development. We
reserve the right to update the technical specifications in this document at any time without prior
notice.
The
ZTE
MF667
USB
modem
is
multi-mode
HSPA+/HSUPA/HSDPA/WCDMA/EDGE/GPRS/GSM
USB
networks.
modem,
With
working
USB
in
interface
connecting to a laptop or a desktop PC, it integrates the functionality of a modem and a mobile
phone (SMS), and combines mobile communication with Internet perfectly. It supports data and
SMS services through the mobile phone network, enabling you to communicate anytime and
anywhere.
Specification
The following table shows the specification of your device.
Interface Type
USB 2.0 HIGH SPEED
Systems supported
Supports most types of laptop and desktop PC.
Operating systems
Windows XP (SP3 and above), Vista, Windows 7
supported
MAC 10.4.11 and later
Linux
Functions
SMS service, Data service, Applications management, support
microSD card, etc.
Confidential and Proprietary Information of ZTE CORPORATION 1
Network Standards
HSPA+/HSUPA/HSDPA/EDGE/GPRS/GSM
Transmission speed
HSPA+: 21.6 Mbps DL
(Max)
HSUPA: 5.76 Mbps UL
Temperature
Storage: -20 ℃ ~ +70 ℃
Operation:-10 ℃ ~ +60 ℃
Dimension
76.5 mm * 27.2 mm * 10.5 mm (Without USB Cap)
Weight
About 28 g
microSD capability
Support up to 32 GB microSD card
Notes:
The microSD Logo (
is a trademark of SD Card Association.
Getting to know your device
The following figure shows the appearance of the MF667. It is only for your reference. The
actual product may be different.
1. microSD card slot
2. SIM/USIM card slot
3. USB Connector
4. Modem Cap
5. Front Cover
2 Confidential and Proprietary Information of ZTE CORPORATION
Hardware Installation
1. Press and push the front cover and remove it.
Notes:
Do not open the front cover rudely so as to avoid the damage of the front cover.
2. Insert the SIM/USIM card into the SIM/USIM card slot.
Insert the SIM/USIM card with the metal contact area facing downwards into the slot, and then push
SIM/USIM card as far as possible, shown as the following picture.
3. Insert the microSD card into the microSD card slot.
Notes:
This modem only supports microSD card.
Insert your microSD card into the microSD card slot, shown as the following picture.
Confidential and Proprietary Information of ZTE CORPORATION 3
4. Put the front cover flatly upon the body of modem and push the front cover to lock the cover in its
place.
5. Connect the Modem to your laptop or desktop PC.
Plug the USB connector into your computer’s USB port and make sure that it is tightly inserted.
The OS automatically detects and recognizes new hardware and starts the installation wizard.
4 Confidential and Proprietary Information of ZTE CORPORATION
LED Lights
Indication
Red
Modem Status
Power on, but not registered to a network
Green bright
Register to 2G/3G network
Green twinkling
Connect to 2G/3G network
Radio Frequency (RF) Energy
This model device meets the government’s requirements for exposure to radio waves.
This device is designed and manufactured not to exceed the emission limits for exposure to radio
frequency (RF) energy set by the Federal Communications Commission of the U.S. Government:
The exposure standard for wireless devices employs a unit of measurement known as the Specific
Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. *Tests for SAR are
conducted using standard operating positions accepted by the FCC with the device transmitting at
its highest certified power level in all tested frequency bands. Although the SAR is determined at
the highest certified power level, the actual SAR level of the device while operating can be well
below the maximum value. This is because the device is designed to operate at multiple power
levels so as to use only the poser required to reach the network. In general, the closer you are to a
wireless base station antenna, the lower the power output.
The highest SAR value for the model device as reported to the FCC when worn on the body, as
described in this user guide, is 1.1 W/kg (Body-worn measurements differ among device models,
depending upon available enhancements and FCC requirements.)
For body worn operation, this device has been tested and meets the FCC RF exposure guidelines
for use with an accessory that contains no metal and the positions the handset a minimum of 5
mm from the body. Use of other enhancements may not ensure compliance with FCC RF
exposure guidelines. If you do not use a body-worn accessory and are not holding the phone at
the ear, position the handset a minimum of 5 mm from your body when the phone is switched on.
While there may be differences between the SAR levels of various devices and at various
positions, they all meet the government requirement.
The FCC has granted an Equipment Authorization for this model device with all reported SAR
levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this
model device is on file with the FCC and can be found under the Display Grant section of
http://www.fcc.gov/oet/ea/fccid/ after searching on
Confidential and Proprietary Information of ZTE CORPORATION 5
FCC ID: Q78-ZTEMF667
FCC Compliance
This device complies with part 15 of the FCC Rules. Operation is subject to the condition that
this device does not cause harmful interference and this device must accept any interference
received, including interference that may cause undesired operation.”
Caution: Changes or modifications not expressly approved by the manufacturer could void the
user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
How to get help
You can get Help by:
• Clicking Help on the software.
• Sending E-mail to mobile@zte.com.cn
• Visiting http://www.zte.com.cn
• Calling Service Hotline: +86–755–26779999
6 Confidential and Proprietary Information of ZTE CORPORATION
Chapter
Warning and Notice
To the owner
•
Some electronic devices are susceptible to electromagnetic interference sent by modem if
inadequately shielded, such as the electronic system of vehicles. Please consult the
manufacturer of the device before using the modem if necessary.
• Operating the modem may interfere with medical devices like hearing aids and pacemakers.
Please always keep them more than 20 centimeters away from such medical devices when they
are turned on. Turn the modem off if necessary. Consult a physician or the manufacturer of the
medical device before using the modem.
• Be aware of the usage limitation when using a modem at places such as oil warehouses or
chemical factories, where there are explosive gases or explosive products being processed.
Turn off your modem if required.
• The use of electronic transmitting devices is forbidden in aircrafts, at petrol stations and in
hospitals. Please observe and obey all warning signs and switch off your modem in these
conditions.
• Do not touch the inner antenna area if not necessary. Otherwise it will affect your modem’s
performance.
• Store the modem out of the reach of little children. The modem may cause injury if used as a
toy.
• Do not touch the metallic parts of the modem so as to avoid a burn, when the modem is
working.
Using your USB Modem
•
Please use original accessories or accessories that are authorized. Using any unauthorized
accessories may affect your modem’s performance, and violate related national regulations
about telecom terminals.
• Avoid using the modem near or inside metallic structures or establishments that can emit
Confidential and Proprietary Information of ZTE CORPORATION 7
electromagnetic waves. Otherwise it may influence signal reception.
• The modem is not waterproof. Please keep it dry and store in a shady and cool place.
• Do not use the modem immediately after a sudden temperature change. In such case, it will
produce dew inside and outside the modem, so don’t use it until it becomes dry.
• Handle the modem carefully. Do not drop, bend or strike it. Otherwise the modem will be
damaged.
• No dismantling by non-professionals and only qualified technicians can undertake repair work.
• Operating temperature range of -10 ℃ ~ +60 ℃ and humidity range of 5% ~ 95% are
recommended.
Limited Warranty
• This warranty does not apply to defects or errors in the Product caused by:
i. Reasonable abrasion.
ii. End User’s failure to follow ZTE’s installation, operation or maintenance instructions or
procedures.
iii. End User’s mishandling, misuse, negligence, or improper installation, disassembly, storage,
servicing or operation of the Product.
iv. Modifications or repairs not made by ZTE or a ZTE-certified individual.
v. Power failures, surges, fire, flood, accidents, actions of third parties or other events outside
ZTE’s reasonable control.
vi. Usage of third-party products, or usage in conjunction with third-party products provided
that such defects are due to the combined usage.
vii. Any other cause beyond the range of normal usage intended for the Product.
End User shall have no right to reject or return the Product, or receive a refund for the Product
from ZTE under the above-mentioned situations.
• This warranty is End User’s sole remedy and ZTE’s sole liability for defective or
nonconforming items, and is in lieu of all other warranties, expressed, implied or statutory,
including but not limited to the implied warranties of merchantability and fitness for a
particular purpose, unless otherwise required under the mandatory provisions of the law.
8 Confidential and Proprietary Information of ZTE CORPORATION
Limitation of Liability
ZTE shall not be liable for any loss of profits or indirect, special, incidental or consequential
damages resulting from or arising out of or in connection with using of this product, whether or
not ZTE had been advised, knew or should have known of the possibility of such damages,
including, but not limited to lost profits, interruption of business, cost of capital, cost of substitute
facilities or product, or any downtime cost.
Confidential and Proprietary Information of ZTE CORPORATION 9
Chapter
Management Software
System Requirements
Operating System
Windows XP (SP3 and later), Vista, Windows 7
MAC 10.5 and later
Linux (Kernel 2.6.20 later)
Configuration (Recommended)
CPU: 1 GHz Pentium or above
Hard Disk: 50 M or above
RAM: 512 M or above
The performance of the modem may be influenced if configuration is under the recommended
requirement.
Access the management software
For windows OS
1.Exit other programs.
2.Connect the device with your computer.
3.When you connect properly, the system will automatically detect and recognize the new
hardware.
After a few seconds, the new icon
is show on the desktop, and then the management
software interface will display as the following picture:
10 Confidential and Proprietary Information of ZTE CORPORATION
Notes:
If the system does not launch installation automatically, you can run the installation program in
path of My Computer > ZTEMODEM > Windows > AutoRun.exe. Then double click
icon.
For MAC OS
When you connect properly, there will be a disk icon
set “show CDs, DVDs, and iPods on the Desktop”, the icon
in disks list. And if you
will show on the desktop.
Left double-click the disk icon, there are three finders named “Linux”, “Mac” and “Windows”.
Open the “Mac” finder, there is an installation package named “Hostless Modem.mpkg”. Left
double-click the package, the installation interface is shown as following picture. Install it
normally.
Confidential and Proprietary Information of ZTE CORPORATION 11
For Linux OS
The installation disk could be shown after the modem inserted to PC.
You could find the installation package in the directory “Linux” in disk.
Copy the installation package “tar.gz” to your hard disk, unzip it and execute the installation
shell script. Please be sure you have the root privilege to execute installation shell script.
12 Confidential and Proprietary Information of ZTE CORPORATION
4
Chapter
Interface Introduction
Main Interface
The whole interface is divided into three parts. Related functions can be executed by operation in
the related areas.
System information area
Function button area
Information area
Click ZTE Corporation, ZTE Light Tab, Weather, Twitter, Facebook, or YouTube to access
the predefined link which are provided by your service provder.
System information Icons
Icon
Explanations
The icon indicates the network signal
intensity. There are 6 stages from none to
the strongest.
The icon indicates the current network
type, i.e. EDGE or GPRS, HSPA service.
(U)SIM card is not detected.
(U)SIM card is detected.
Unread shortmessage
Confidential and Proprietary Information of ZTE CORPORATION 13
Icon
Explanations
Disconnect from the Internet.
Connect to the Internet.
14 Confidential and Proprietary Information of ZTE CORPORATION
Chapter
Access mobile network
When you connect the modem properly, your modem will search the available network and
attach it automatically. If you want to change the settings, please refer to the following
introduction.
Set the Band Selection Mode
1. Select Settings→Network Select, the Band Selection Mode is shown in the following figure:
2. Choose the Band Selection Mode.
• Automatic: The system selects the network automatically by the user’s selected rules and the
network status.
• Manual: The network is selected by users themselves.
When the Manual is selected, click Apply button to search the network. Wait a minute, the
supplier list will show as following picture:
Select the network that the supplier is utilized to serve your (U)SIM.
3. Click Apply to confirm.
View the 3G and system information
Select Status →Basic to access the following figure:
Confidential and Proprietary Information of ZTE CORPORATION 15
16 Confidential and Proprietary Information of ZTE CORPORATION
Chapter
Surfing on the Internet
You can use the default configuration to access the Internet. If you want to change the settings,
please refer to the following introduction.
Set APN parameters
1. Select Connection → APN Settings to access the following figure:
2. Set the related parameter.
Parameter
Description
APN address mode. If a fixed APN is provided by your service
APN Setting provider, select Manual APN. Otherwise select the Auto APN,
and the device will automatically obtain this parameter.
Profile
Selection
Choose the desired profile.
Profile Name Enter the profile name.
APN Access Point Name.
If a fixed IP address is given by your service provider, then choose
DNS Manual DNS. Otherwise, choose Auto DNS, and device will
automatically obtain parameters.
Confidential and Proprietary Information of ZTE CORPORATION 17
Parameter
Description
Password Authentication Protocol (PAP) provides a simple method
without encryption for the peer to establish its identity using a
Authentication 2-way handshake. Challenge-Handshake Authentication Protocol
(CHAP) is used to periodically verify the identity of the peer using
a 3-way handshake.
User Name
Password
User name is used to obtain authentication from the ISP when the
connection is established.
Password is used to obtain authentication from the ISP when the
connection is established.
Click Set default to set the current profile as the default profile.
If Manual APN is selected, the following picture will display:
Click Add to define a new APN profile, and then click Save to save the profile.
Select one profile and click Delete to delete it.
Notes:
You cannot edit or delete the current default APN profile.
Set WAN Connection Mode
1. Select Connection→Dial Up to access the following figure:
18 Confidential and Proprietary Information of ZTE CORPORATION
2. Set the WAN Connection Mode.
There are three connection modes:
• Always On: The device will automatically connect to WAN when it is powered on.
• Manual: Connect to the Internet manually.
Click Apply to confirm your configuration.
Connect to the Internet
1. Click
icon to access the following figure:
2. Click Connect to access to the Internet.
View the Statistics
1. Select Settings→Advanced→Statistics to access the following figure:
Confidential and Proprietary Information of ZTE CORPORATION 19
2. Click Clear to clear the statistics.
20 Confidential and Proprietary Information of ZTE CORPORATION
Chapter
SMS
This function allows you to send or receive short messages.
Set SMS parameters
1. Select SMS→SMS Settings to access the following figure:
2. Set related parameters.
Parameters
Description
Validity
Configure the validity period of outgoing messages
Center Number
Enter the short message center number, detailed please consult your
service provider
Save New
Select the device or SIM card to save your messages
Message
Confidential and Proprietary Information of ZTE CORPORATION 21
Parameters
Delivery Report
Description
Receive or reject a popup message to inform you when the message is
delivered to the recipient
Send a new message
1. Select SMS→New Message to access the following figure:
2. Enter the recipient’s phone number.
3. Enter a message.
4. Click Send to send the message.
Read Short Message
When there is a new short message, the system will inform you with the following figure:
1. Click Yes to confirm.
22 Confidential and Proprietary Information of ZTE CORPORATION
2. Select SMS > Device/SIM Card > Inbox to access the following figure:
3. Click the new message to read it.
SMS Operation Guide
You can check the messages saved in your device or SIM Card.
Inbox
Select SMS > Device/SIM Card > Inbox to access the following figure:
All the received messages saved will be displayed here.
• Click Reply to reply to the selected message sender.
• Click Delete to delete the selected message.
• Click Delete All to delete all the messages.
Outbox
Select SMS > Device/SIM Card > Outbox to access the following figure:
All the successfully sent messages will be displayed here.
Drafts
Select SMS > Device/SIM Card > Drafts to access the following figure:
Confidential and Proprietary Information of ZTE CORPORATION 23
All the drafts and unsuccessfully sent messages will be displayed here.
• Click the selected message edited interface, then click Send to send it.
24 Confidential and Proprietary Information of ZTE CORPORATION
Chapter
Phonebook
This function allows you store and edit contacts.
Add a new contact
1. Select Phonebook > Add New to access the following figure:
2. Set the related parameters.
Parameters
Description
Location
Select the device or SIM card to save your contacts
Name
Enter the contact’s name
Mobile number
Enter the contact’s phone number
3. Click Save to confirm your configuration.
Edit a contact
1. Select Phonebook > Device/SIM card.
2. Select the contact which you want to edit.
3. Click View.
4. Click Edit.
Confidential and Proprietary Information of ZTE CORPORATION 25
5. Edit the contact.
6. Click Save to confirm.
Delete contacts
1. Select Phonebook > Device/SIM card.
2. Select the contact which you want to delete.
3. Click Delete to delete the contact. Or Click Delete All to delete all contacts directly.
26 Confidential and Proprietary Information of ZTE CORPORATION
Chapter
Others
View Network Status
Select Status > Network Status to access the following figure:
Restore Factory Defaults
1. Select Settings > Advanced > Restore to access the following figure:
2. Click Restore to set all the settings to their factory default values.
3. Click
to confirm. And the device will restart automatically.
Confidential and Proprietary Information of ZTE CORPORATION 27
Enabling PIN Code
PIN code is the personal identification code of (U)SIM card, used to avoid illegal usage for your
(U)SIM card. Once PIN code is enabled, the correct PIN code should be input when you login at
the first time.
1. Select Settings > Advanced > PIN Management to access the following figure:
2. Set the parameters.
Parameters
Description
PIN Status
Show the current PIN status.
Action
Select Enable.
PIN
Enter the PIN number
3. Click Apply to confirm.
Notes:
Three times consecutive wrong PIN code entries will block the (U)SIM card. The detailed
information please contacts your service provider.
Modifying PIN Code
1. Select Settings > Advanced > PIN Management to access the following figure:
28 Confidential and Proprietary Information of ZTE CORPORATION
2. Enable PIN code.
3. Click Modify PIN for the action.
3. Type the old PIN code.
4. Type twice the new PIN code
5. Click Apply to confirm.
USSD
This function allows you to inactive with the service provider.
1. Select Settings > USSD to access the following figure:
2. Input the service number which you want to send.
3. Click Send to confirm.
STK
1.Select Settings > STK to show some services which your (U)SIM card provides.
Confidential and Proprietary Information of ZTE CORPORATION 29
2.Check the box before the service.
3.Click Apply to active it.
For further details, please contact your service provider.
30 Confidential and Proprietary Information of ZTE CORPORATION
Chapter
10
microSD Card
Use microSD Card
1. Insert the microSD card into the device.
2. Connect the device with your PC or laptop, and the system will display it as a removable disk.
On Mac system, there will be a disk icon in disks list
. And if you set “show CDs,
DVDs, and iPods on the Desktop”, the icon will show on the desktop
. “Untitled” is the
name of the disk.
3. Use it freely.
Uninstall microSD Card
For Windows OS
1. Left click the icon
in the Windows system tray bar. Then a menu will popup and indicate
the USB devices list as below:
2. Select Safely remove the USB disk which is relevant to the device.
3. Pull out the device directly, if you want to remove it from the laptop or desktop PC.
For MAC OS
1. You should right (or command + left) click the disk icon, the popup menu is as below:
2. Select Eject “Untitled”.
3. Pull out the device directly, if you want to remove it from the laptop or desktop PC.
Confidential and Proprietary Information of ZTE CORPORATION 31
For Linux OS
The uninstall methods vary from Distributions and Desktop Environments. In general, you could
find uninstall icon in Task Bar or Dock Bar.
For example:
Fedora
Ubuntu
32 Confidential and Proprietary Information of ZTE CORPORATION
Chapter
11
FAQ
If you encounter problems while using the device, or if it performs erratically, you can consult
the information in the chart below. If your particular problem cannot be resolved using the
information in the chart, contact the dealer where you purchased the device.
Problem Description
Possible Causes
Problem Solving
When the device is
The device is not connected properly.
1. Restart the computer, or
connected, the
reconnect the device.
computer cannot find
2. Insert the device to
it.
another computer.
Cannot open the
The system configuration is having
WEBUI configuration
difficulty with the auto-run software.
1.Close all the anti-virus
functions
page automatically
2.The device will appear as a
after the device is
virtual CDROM on the
connected properly.
PC’s. Click on the icon
and start the
AutoRun.exe.
3. Double click
icon on the desktop.
After restarting the
1. You are in the place where there is
1. Change location to a place
computer, there is no
no GSM/ GPRS /EDGE /WCDMA
with stronger signal.
signal indicated.
/HSDPA(HSUPA) network coverage.
Such places include underground
parking garages, tunnels, and some
remote rural areas.
Confidential and Proprietary Information of ZTE CORPORATION 33
Problem Description
Possible Causes
Problem Solving
2. The (U)SIM card isn't inserted
2. Remove and reinsert the
properly.
(U)SIM card correctly.
3. The MODEM device is positioned in 3. Adjust the angle / position
such a way as that adversely affects the
of the MODEM device or its
devices signal reception.
proximity to other electronic
devices.
Sent Message failure.
1. The SMS center number is incorrect.
1. Your device is
preconfigured so it is
unlikely that it will need
changing. However if it is
missing or incorrect, please
contact your operator.
2. The network is busy or you are in an
2. Try later or move to an
area with no signal.
area with stronger signal.
Data connection failed. 1. You are in the place where there is
no GSM/ GPRS/ EDGE/ WCDMA/
1. Move to an area with
stronger signal.
HSDPA(HSUPA) network coverage.
2. The network is busy.
2. Try later.
3. The APN in the user configuration
3. Check the APN settings,
file is incorrect.
and refer to the chapter: Set
APN parameters.
4. The device data is corrupted.
4. Local network access or
the target server maybe
experience problems. Retry
data request.
5. The network type has been selected
5. Reselect the network type
manually, but is incorrect.
according to the type of the
(U)SIM card.
34 Confidential and Proprietary Information of ZTE CORPORATION
Problem Description
Possible Causes
Problem Solving
Connected to the
1. After connection, you are unable to
1. Check the APN settings.
Internet, but it cannot
open web pages.
open any website
2. IE browser is causing problems.
page.
2. Upgrade to the new
version or reinstall the IE
browser.
3. Your operating system maybe
3. Use the professional
infected by a virus. Worm Blaster for
anti-virus software to check
example can affect upload and
and remove the virus.
downloaded data flow, resulting in an
inability to access a website.
4. You have connected to an APN
4. This happens when you
which cannot connect to the Internet.
modify the default settings.
Check the entry and enter
the correct APN from your
operator.
Confidential and Proprietary Information of ZTE CORPORATION 35

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Create Date                     : 2012:04:27 09:35:39+08:00
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2012:04:27 09:35:39+08:00
Format                          : application/pdf
Creator                         : Administrator
Title                           : Microsoft Word - MF667 USB Modem User Manual V2.0
Document ID                     : uuid:c124af60-a449-470d-afd5-17f2541360e1
Instance ID                     : uuid:0e2bbbd4-8618-4c3e-bf97-c6438fbe2422
Page Count                      : 39
Author                          : Administrator
EXIF Metadata provided by EXIF.tools
FCC ID Filing: Q78-ZTEMF667

Navigation menu