ZTE ZTEMF70 USB MODEM User Manual

ZTE Corporation USB MODEM

User Manual

Confidential and Proprietary Information of ZTE CORPORATION 1 Let’s go Getting started with your device. ZTE CORPORATION NO. 55, Hi-tech Road South, ShenZhen, P.R.China Postcode: 518057
ZTE MF70 Getting Started 2 Confidential and Proprietary Information of ZTE CORPORATION Getting to know your device Appearance The following figure is only for your reference. The actual product may be different. 1. microSD Card Slot 2. RESET Button 3. SIM/USIM Card Slot 4. USB Connector 5. External Antenna Connector 6. Front Cover 7. Indicator 8. Device Cap NOTES:  microSD is a trademark of SD Card Association.  Please use the original external antenna if necessary.  RF Connector : For production line measurement only, not for external antenna connection Indicator Indicator Status Description 3G Red solid Turn on and not register. Green solid Register to 2G. Green twinkling Connect to 2G and data transfer. Blue solid Register to 3G. Blue twinkling Connect to 3G and data transfer. Wi-Fi Blue twinkling Wi-Fi is Active. Blue solid WPS is Active. LED off Wi-Fi is closed. Connection Scenario
ZTE MF70 Getting Started Confidential and Proprietary Information of ZTE CORPORATION 3 Your device supports multi-clients for surfing on the Internet at the same time. The following figure is only for your reference. TIP: With other accessories, such as mobile power and car power adapter, you will be able to supply power to your device and use it anywhere and anytime. Installing Your Device 1. Open the front cover. NOTE: Do not open the front cover rudely so as to avoid the damage of the front cover. 2. Insert the SIM/USIM card and microSD card.
ZTE MF70 Getting Started 4 Confidential and Proprietary Information of ZTE CORPORATION 3. Close the front cover. Connecting to Your Device A. Via USB Connector 1). Plug the USB connector into the USB port and make sure it is tightly inserted. 2). The OS detects and recognizes new hardware and finishes the installation automatically. NOTE: If the system does not launch installation automatically, you can run the installation program in path of My Computer > Mobile Hotspot. 3). The WebGUI configuration page will be opened automatically, and then the client, your PC, will connect to your device successfully. B. Via Wi-Fi 1) Supply power to your device by connecting to your PC or using other accessories. 2) Use your normal Wi-Fi application on the client to search the available wireless network.
ZTE MF70 Getting Started Confidential and Proprietary Information of ZTE CORPORATION 5 NOTE: Please set the client to obtain an IP address automatically referring to the chapter “Configuring your PC”, and then the client will get an IP address like “192.168.0.100”. 3) Select the SSID of your device, and then click Connect. 4) Input the password, and then click Connect. NOTE: Password may be requested for Wi-Fi connection. Please check the body of your device to find the default information after opening the front cover.
ZTE MF70 Getting Started 6 Confidential and Proprietary Information of ZTE CORPORATION 5) Wait a moment, and then the client will connect to your device successfully. Accessing the Internet After successfully connecting to your device, you can access the Internet in the Automatic or Manual mode. The default mode is Automatic. Mode Operations Automatic Your device will connect to the Internet automatically, and your clients can surf on the Internet directly. Manual Login the webGUI configuration page, the default password is admin, and select Settings > 3G Settings > WAN Connection Mode > Manual, click Connect or Disconnect. NOTE: If you want to modify the detailed parameters of your device, please login the webGUI configuration page by visiting http://192.168.0.1 or http://m.home. Configuring Your PC Follow the following steps and figures for Windows XP to configure the Internet Protocol for your Wi-Fi connection. 1. Right-click My Network Places, and then select Properties.
ZTE MF70 Getting Started Confidential and Proprietary Information of ZTE CORPORATION 7 2. Right-click Wireless Network Connection, and then select Properties. 3. Select Internet Protocol(TCP/IP), and then click Properties. 4. Select Obtain an IP address automatically and Obtain DNS server address automatically, and then click Ok to finish the configuration.
ZTE MF70 Getting Started 8 Confidential and Proprietary Information of ZTE CORPORATION National Restrictions 2400.0-2483.5MHz Country Restrictions Reason/remark UKraine e.i.r.p. ≦100mW with built-in antenna with amplification factor up to 6dBi. France Limited implementation Outdoor use limited to 10mw eirp.Within the band 2454-2483.5MHz.Military Radiolocation use. Refarming of the 2.4 GHz band has been ongoing in recent years to allow current relaxed regulation. Full implementation planned 2012. Italy For private use，a general authorization is required if WAS/RLAN’S are used outside own premise .For public use，a general authorization is required. Norway Implemented This subsection does not apply for the geographical area within a radius of 20 km from the centre of Ny-Ålesund. Russian Federation 1. SRD with FHSS modulation 1.1. Maximum 2.5 mW e.i.r.p 1.2. Maximum 100mW e.i.r.p. Permitted for use SRD for outdoor applications withour restriction on installation height only for purposes of gathering telemetry information for automated monitoring and resources accounting systems. Permitted to use SRD for other purposed for outdoor applications only when the installation height is not exceeding 10 m above the ground surface. 1.3. Maximum 100mW e.i.r.p. Indoor applications 2. SRD with DSSS and other than FHSS wideband modulation 2.1Maximum mean e.i.r.p. density is 2mw/MHz. maximum 100mW e.i.r.p. 2.2 Maximum mean e.i.r.p. density is 20mw/MHz. maximum 100mW e.i.r.p. permitted to use SRD for outdoor applications only for purposes of gathering telemetry information for automated monitoring and resources accounting systems or security systems. 2.3 Maximum mean e.i.r.p. density is 10mw/MHz. maximum 100mW e.i.r.p. Indoor applications
ZTE MF70 Getting Started Confidential and Proprietary Information of ZTE CORPORATION 9 This equipment may be operated in: AT BE CY CZ DK EE FI FR DE GR HV IE IT LV LT LU MT NL PL PT SK SI ES SE GB IS LI NO CH BG RO TR Troubleshooting Problem Suggested Solution Can not establish the USB connection between your device and PC 1. You need install the software. Run the installation program in path of My Computer > Mobile Hotspot. 2. If the driver of your device is abnormal, please reinstall the software. You need uninstall the software first. Can not establish the Wi-Fi connection between your device and client 1. Make sure the Wi-Fi function is active. Check the Wi-Fi indicator. 2. Refresh network list and select the correct SSID. 3. Check the IP address to make sure your client can obtain an IP address automatically in the Internet protocol (TCP/IP) properties. 4 Type the correct network key (Wi-Fi password) when you connect to the device. The client connected to the device can not access the Internet 1 Make sure your SIM card is available. 2 Change the location to find a place with good signal. 3 Check WAN Connection mode setting. 4 Contact with your service provider and confirm your APN settings. Can not visit the webGUI configuration page 1. Enter the correct address. The default address is http://192.168.0.1 or http://m.home. 2. Only use one network adapter in your PC. 3. Do not use any proxy server. About the password 1. For the Wi-Fi connection password, please check the label on the device. 2. The default password of the webGUI configuration page is admin. 3. If you changed the password and forgot the new password, You
ZTE MF70 Getting Started 10 Confidential and Proprietary Information of ZTE CORPORATION need to restore the device to the factory default settings. For more assistance, please: • Send E-mail to mobile@zte.com.cn • Visit http://www.zte.com.cn • Call Service Hotline: +86–755–26779999 NOTE: Do not use the device in an enclosed environment or where heat dissipation is poor. Prolonged work in such space may cause excessive heat and raise ambient temperature, which may lead to automatic shutdown of the device for your safety. In the case of such event, cool the device in a well-ventilated place before turning on for normal use. The information on the package is only for your reference. Images are for your reference only. Please check the product model before purchasing. ZTE reserves the rights to change specifications and parameters of the products without further notice. FCC Compliance This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. Radio Frequency (RF) Energy This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard for wireless device employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. *Tests for SAR are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well
ZTE MF70 Getting Started Confidential and Proprietary Information of ZTE CORPORATION 11 below the maximum value. This is because the device is designed to operate at multiple power levels so as to use only the poser required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. SAR compliance has been established in the host product(s) (laptop computers), tested at 5mm separation distance to the human body, and tested with USB slot configurations including Horizontal-UP, Horizontal-Down, Vertical-Front, Vertical-Back. This device can be used in host product(s) with substantially similar physical dimensions, construction, and electrical and RF characteristics. The highest SAR value, tested per FCC RF exposure guidelines for USB dongle, as described in this user guide, is 1.15 W/kg. The FCC has granted an Equipment Authorization for this device with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this device is on file with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid after searching on FCC ID: Q78-ZTEMF70.

Navigation menu