ZTE ZTEWP659 GSM wireless Phone User Manual ZTE WP657

ZTE Corporation GSM wireless Phone ZTE WP657

Contents

UserGuide.pdf

1
ZTE WP659+
GSM Wireless Phone
User Guide
2
Know Your Phone
Key Instruction
Key
Description
1. MENU/OK
• Enter main menu.
• Performs the function indicated at the left bottom
of the screen.
2. Number
• Use these keys to enter numbers and characters.
3
Key
Description
3. # , *
• Perform different functions under different conditions.
4.Scrolling
• Press these keys to scroll cursor to the left, right, up
or down when inputting characters or selecting items.
• Default functions in standby mode are set in Settings
menu.
5. NAMES/BACK
• To return to upper menu, or cancel
• Enter the Phonebook in Idle screen
6. EXIT
• To turn ON/OFF the unite
7. MUTE
•To mute the voice while communication
8.MESSAGE
• This is the shortcut key to enter message menu in
standby mode.
9. CALL/REDIAL
• Make a call or answer an incoming call.
• In standby mode, press this key to enter Dialed calls list.
10.HANDS-FREE
• If you are using the handset to call and want to transfer
the call to the speakerphone, press this key and hang up
the handset to put conversation on the speakerphone.
• Press this key to end a hands-free call.
Notes:
In this manual, “press” a key means to press the key once, “hold” a
4
key means to press the key for 2 or 3 seconds.
Interface Icons
Icon
Description
Icon
Signal strength
Silent
Installation
1. Handset
Connect phone and handset via the phone cord.
2. External power adapter
Plug the external power adapter to the external AC socket.
3. SIM card
Always switch the phone off before removing or inserting SIM card.
Open the bottom cover of the battery. Remove the battery, slide the SIM card into the
SIM card slot. Make sure that the contact area of the card is facing down, and the beveled
corner matches with the SIM card slot. Put in the battery and install the bottom cover.
How to Power on/off
To power on the phone, connect phone and external power outlet with the power
adapter and then hold the EXIT key till the phone is powered on.
To power off the phone, at standby mode, hold the EXIT key till the phone is powered
off.
5
Notes:
It is strongly recommended to connect the phone to external power outlet, and
use internal battery to power your phone only when external power fails or is not
available. The phone will charge the internal battery automatically when it is
connected to external power outlet.
How to Make a Call
There are two methods for making a call.
The first method:
1. Pick up the handset or press the HANDS-FREE key.
2. Enter the phone number, press CALL/REDIAL key to make the call.
The second method:
Enter the number or select recipient’s number from Contacts, or press CALL/REDIAL
key to select a number from the Dialed calls list, then press CALL/REDIAL key to make
the call.
Notes:
Add the international prefix, country code and area code (without the leading 0)
before the number when making an international call.
Message
Select Message in Menu.
• Select Write message to write message, Press Options select Send to or Save.
• Select Inbox to view messages received.
• Select Outbox to view the failure messages.
• Select Drafts to view the draft messages.
• Select Sent messages to view the successfully sent messages.
• Select SMS templates to View the template messages.
6
• Select SMS settings to make some necessary short message settings.
• Select Memory status under SMS settings to View the message of saved entries and
maximum number of entries capacity in phone and SIM.
Security setting
Security setting could prevent your phone from unauthorized use. The default phone code
is 1122. Change it to your own as soon as possible.
If you change the default phone code to a new one, remember it or place it at secure
place.
PIN Code and PUK Code
• PIN code: PIN code could prevent your SIM card from illegal use. When PIN code is
enabled, you should enter the PIN code when powering on the phone again. Change the
default PIN code to your own as soon as possible.
• PUK code: The SIM card will be locked if you enter a wrong PIN code consecutively for
three times. To unlock, you need PUK code.
Notes:
PIN code and PUK code may be offered together with the SIM card. If not, contact
your service provider.
Text Input
Operation
Method
Input digits
“123”, press the Number keys to input the digits you
want directly.
7
Operation
Method
Input letters
“Abc”, “abc”, “ABC”, press corresponding letter key
till the letter appears.
Input words
“=ABC”, “=abc”, press the Number keys to input the
characters of the word. Then press MENU/SELECT key
to confirm.
Input symbol
Press * key, and then select corresponding symbol by
using Scrolling keys.
Input space
Apart from Numbers input mode, press “0” key to
add space.
Erase character
Press NAMES/BACK key. Hold NAMES/BACK key until
the cursor before the character be erased.
Move the cursor
Press Scrolling keys.
Change input mode
Press # key to change text input mode.
Menu Function
Hereinafter are brief instructions for menu functions of the phone.
Function
Description
Selection
8
Function
Description
Selection
Create
message
Create message and send to
others.
Menu→ Messaging→ Write
message
Read message
Read message in Inbox,
Outbox, Drafts, Sentbox.
Menu→ Messaging→
Inbox/Outbox/Drafts/Sent
messages
Message
settings
Make some necessary short
message settings.
Menu→ Message→ SMS
settings
Call history
View or dial all recent calls.
Menu→ Call history→ Missed
calls/Dialed calls/Received
calls/Delete call logs
Call duration
Check the Last call, Received
calls, Dialed calls or Call
history duration.
Menu→ Call history→ Missed
calls/Dialed calls/Received
calls→ Options(Scrolling to
view)
Phonebook
View contacts
Menu→ Phonebook
Add new
contact
Save phone number.
Menu→ Phonebook→
Options→ Select
Speed dial list
Set and view speed dial list.
Menu→ Phonebook→
Options→ Phonebook settings→
Speed dial
9
Function
Description
Selection
Call divert
Specify the conditions under
which the call types should be
diverted to another number.
Menu→ Settings→ Call
settings→ Call divert
Call waiting
Put the current call on hold to
answer the other incoming
call.
Menu→ Settings→ Call
settings→ Call waiting
Call barring
Restrict the dialing or
receiving of certain calls.
Menu→ Settings→ Call
settings→ Call barred
Advanced
settings
Other setting items of Call
setting
Menu→ Settings→ Call settings
→ Advanced setting→ Black
list/Call time reminder/Answer
mode/Delay dial
Time and date
Set the date and the time, and
the date and time format.
Menu→ Settings→ Phone
settings→ Time & date
Language
Set the display language
Menu→ Settings→ Phone
settings → Language
Dedicated keys
Set the scrolling key as
shortcut of some menu.
Menu→ Settings→ Phone
settings→ Dedicated keys
Screen auto
lock
Lock the keypad
automatically. Press # key,
then * key to unlock.
Menu→ Settings→ Phone
settings→ Screen auto lock
10
Function
Description
Selection
Backlight
Set the backlight time, when
using the phone.
Menu→ Settings→ Phone
settings →LCD backlight
Change PIN
Set or change the PIN code
Menu → Settings → Security
settings → SIM security →
Change PIN
Change
password
Set or change the phone lock
code.
Menu→ Settings→ Security
settings→ Phone security→
Change password
Restore
settings
Switch to the factory default
settings. The phone will clew
input password, the
password default 1122.
Menu→ Settings→ Restore
factory settings
Profiles
Set profiles of your phone.
Menu→ Profiles
Network
Settings
Set the way of searching
network.
Menu→ Settings→ Network
selection
Calculator
Execute basic math
calculation.
Menu→ Organizer→ Calculator
Alarm clock
Set alarm clock.
Menu→ Organizer→ Alarm
FM radio
Listen to FM radio.
Menu→ FM radio.
11
Warning and Maintenance
• Some electronic devices are susceptible to electromagnetic interference sent by the
phone if inadequately shielded. Keep using the phone at least 20 cm or as far away as
you can from TV sets, radio and other automated office equipment so as to avoid
electromagnetic interference.
• Operating the phone may interfere with medical devices like hearing aides and
pacemakers, or other medical devices in hospital. Consult a physician or the
manufacturer of the medical device before using the phone.
• Be aware of the usage limitation when using the phone at places such as oil warehouses,
or chemical factories, where there are explosive gases or explosive products being
processed, because even if your phone is in idle state, it still transmits radio frequency
(RF) energy. Therefore, power off your phone if required.
• Do not touch the antenna while calling. Otherwise it will affect the quality of calling and
waste battery energy. The damaged antenna will cause slight burn while touching your
skin.
• Keep the antenna free from obstructions and position the antenna straight up. This will
ensure best call quality.
• Keep the phone out of the reach of small children. The phone may cause injury if used
as a toy.
• Do not put other things on the terminal to avoid overlaying radiator.
• Use original accessories or accessories that are authorized by the manufacturer. Using
any unauthorized accessories may affect your phone’s performance, and violate related
national regulations about telecom terminals, or even endanger your body.
• As your phone can produce electromagnetic field, do not place it near magnetic items
such as computer disks.
• Do not expose your phone to direct sunlight or store it in hot areas. High temperature
can shorten the life of electronic devices.
• Prevent liquid from leaking into your phone.
• Disconnect external power supply and do not use your phone during thunderstorm.
• Unplug the external power adapter or remove battery when your phone is not in use,
esp. for a long period of time.
• It is highly recommended to charge the battery before initial use. The battery might
12
have been discharged during storage and delivery.
• Do not unplug the connector of the data cable from the phone, and not install or
remove battery, when the power is on.
• Do not attempt to disassemble the phone by yourself. Non-expert handling of the
devices may damage them.
• The phone is non-waterproof, keep it dry and store in shady and cool place.
• If you want to clean your phone, please use clean fabric that is a bit wet or anti-static.
Do not use harsh chemical cleaning solvents or strong detergents to clean your phone,
such as alcohol, dilution agent and benzene. Power off your phone before you clean it.
Limited Warranty
• This warranty does not apply to defects or errors in the Product caused by:
i. Reasonable Router Appearance Disfiguration.
ii. End User’s failure to follow ZTE’s installation, operation or maintenance instructions
or procedures.
iii. End User’s mishandling, misuse, negligence, or improper installation, disassemble,
storage, servicing or operation of the Product.
iv. Modifications or repairs not made by ZTE or a ZTE-certified individual.
v. Power failures, surges, fire, flood, accident, actions of third parties or other events
outside ZTE’s reasonable control.
vi. Usage of products of third Parties, or usage in conjunction with third party products
provided that such defects is due to the combined usage.
vii. Any other cause beyond the range of normal usage for Products.
End User shall have no right to reject, return, or receive a refund for any product from
ZTE under the above-mentioned situations.
• This warranty is end user’s sole remedy and ZTE’s sole liability for defective or
nonconforming items, and is in lieu of all other warranties, expressed, implied or
statutory, including but not limited to the implied warranties of merchantability and
fitness for a particular purpose, unless otherwise required under the mandatory
provisions of the law.
Limitation of Liability
13
ZTE shall not be liable for any loss of profits or indirect, special, incidental or consequential
damages resulting from or arising out of or in connection with using of this product,
whether or not ZTE had been advised, knew or should have known of the possibility of
such damages, including, but not limited to lost profits, interruption of business, cost of
capital, cost of substitute facilities or product, or any downtime cost.
Troubleshooting
If your phone appears following phenomenon in the process of application, read following
relative information at first. If the problems still can not be solved, please contact with the
distributor or service provider.
Problem
Check Point
When switching on the phone, it
prompts enter “PIN”.
Input your PIN code which offered with
SIM card together. If you have changed
PIN code, input the new PIN code.
When switching on the phone, it
prompts “Emergency”.
Check whether valid SIM card is inserted
or not.
When switching on the phone, it
prompts enter “password”.
Enter lock code you set already to unlock
the phone.
No ring tone prompt for a incoming
call.
Check volume setting of ring tone.
And check whether "mute" is set in Profiles.
No display on screen when
disconnect external power supply.
Check whether the battery has electricity,
or it is damaged; or power on the phone
again.
Press CALL/REDIAL key, but no
Check whether you have set call barring.
14
Problem
Check Point
number is sent.
Certain call cannot be received.
Check whether the number is restricted.
Cannot send short messages.
Check the network condition, or message
center setting.
Other abnormal phenomenon.
First refer to the user manual, and then
check whether the power is connected
correctly or not. If there is no problem,
restart the phone.
.NOTICE
Note1
：
This device complies with Part 15 of the FCC Rules
，
Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Note2: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Note3: For EUT which intended use is at least 20 cm between human body and antenna.

Navigation menu