ZTE ZTEWP659 GSM Fixed Wireless Phone User Manual WP659 x

ZTE Corporation GSM Fixed Wireless Phone WP659 x

Contents

user manual rev

1 ZTE WP659 GSM Wireless Phone User Guide
2 Know Your Phone Key Instruction Key Description 1. MENU/SELECT • Enter main menu. • Performs the function indicated at the left bottom of the screen.
3 Key Description 2. Number • Use these keys to enter numbers and characters. 3. # , * • Perform different functions under different conditions. 4.Scrolling • Press these keys to scroll cursor to the left, right, up or down when inputting characters or selecting items. • Default functions in standby mode are set in Settings menu. 5. EXT PWR • Lights up when the phone is connected to external power outlet. 6. NAMES/CLR/BACK • Performs the function indicated at the right bottom of the screen. 7.MESSAGE • This is the shortcut key to enter message menu in standby mode. 8. EXIT • End an active call or reject calls. • Power on/power off the phone. 9. CALL/REDIAL • Make a call or answer an incoming call. • In standby mode, press this key to enter Dialed calls list.
4 Key Description 10.HANDS-FREE • If you are using the handset to call and want to transfer the call to the speakerphone, press this key and hang up the handset to put conversation on the speakerphone. • Press this key to end a hands-free call. Notes: In this manual, “press” a key means to press the key once, “hold” a key means to press the key for 2 or 3 seconds. Interface Icons Icon Description Icon Description Signal strength New message Silent Unconditional divert Power indicator Alarm clock Installation 1. Handset Connect phone and handset via the phone cord. 2. External power adapter Plug the external power adapter to the external AC socket.
5 3. SIM card Always switch the phone off before removing or inserting SIM card. Open the bottom cover of the battery. Remove the battery, slide the SIM card into the SIM card slot. Make sure that the contact area of the card is facing down, and the beveled corner matches with the SIM card slot. Put in the battery and install the bottom cover. How to Power on/off  To power on the phone, connect phone and external power outlet with the power adapter and then hold the EXIT key till the phone is powered on.  To power off the phone, at standby mode, hold the EXIT key till the phone is powered off. Notes: It is strongly recommended to connect the phone to external power outlet, and use internal battery to power your phone only when external power fails or is not available. The phone will charge the internal battery automatically when it is connected to external power outlet. How to Make a Call There are two methods for making a call.  The first method: 1. Pick up the handset or press the HANDS-FREE key. 2. Enter the phone number, press CALL/REDIAL key to make the call.  The second method: Enter the number or select recipient’s number from Contacts, or press CALL/REDIAL key to select a number from the Dialed calls list, then press CALL/REDIAL key to make the call. Notes: Add the international prefix, country code and area code (without the leading 0) before the number when making an international call.
6 Voice mail server Before using voice mail, please contact service provider to confirm that the voicemail has been activated. The system automatically sends a message to your phone to inform you that there is a new voice mail. Read the message and then dial voice mailbox number to listen to your voice mail. To read or send your voice mail, please hold “1” key to dial voice mail box number in standby mode. Message Select Message in Menu. • Select Write message to write message, Press Options select Send or Save as draft . • Select Inbox to view messages received. • Select Outbox to view the failure messages. • Select Drafts to view the draft messages. • Select Sentbox to view the successfully sent messages. • Select Templates to View the template messages. • Select Voice mail server to listen to your voice mail messages, or set the voice mailbox number. • Select Settings to make some necessary short message settings. • Select Message capacity to View the message of saved entries and maximum number of entries capacity in phone and SIM. Phone Code Phone code could prevent your phone from unauthorized use. The default phone code is 1234. Change it to your own as soon as possible. If you change the default phone code to a new one, remember it or place it at secure place.
7 PIN Code and PUK Code • PIN code: PIN code could prevent your SIM card from illegal use. When PIN code is enabled, you should enter the PIN code when powering on the phone again. Change the default PIN code to your own as soon as possible. • PUK code: The SIM card will be locked if you enter a wrong PIN code consecutively for three times. To unlock, you need PUK code. Notes: PIN code and PUK code may be offered together with the SIM card. If not, contact your service provider. Text Input Operation Method Input digits “123”, press the Number keys to input the digits you want directly. Input letters “Abc”, “abc”, “ABC”, press corresponding letter key till the letter appears. Input words “En”, “en”, “EN”, press the Number keys to input the characters of the word. Then press MENU/SELECT key to confirm. Input symbol Press * key, and then select corresponding symbol by using Scrolling keys. Input space Apart from Numbers input mode, press “0” key to add space.
8 Operation Method Erase character Press NAMES/CLR/BACK key. Erase all the characters Hold NAMES/CLR/BACK key until the cursor before the character be erased. Move the cursor Press Scrolling keys. Change input mode Press # key to change text input mode. Menu Function Hereinafter are brief instructions for menu functions of the phone. Function Description Selection Create message Create message and send to others. Menu→ Message→ Write message Read message Read message in Inbox, Outbox, Drafts, Sentbox. Menu→ Message→ Inbox/Outbox/Drafts/Sentbox Voice mail Receive and listen to voice mail messages. Set voice mailbox number. Menu→ Message→ Voice mail server Message settings Make some necessary short message settings. Menu→ Message→ settings
9 Function Description Selection Recent calls View or dial all recent calls. Menu→ Call logs→ Missed calls/Dialed calls/Received calls Call duration Check the Last call, Received calls, Dialed calls or Call history duration. Menu→ Call logs→ Call timers Browse contact View contacts Menu→ Contacts Add contact Save phone number. Menu→ Contacts→ Options→ New Speed dial list Set and view speed dial list. Menu→ Contacts→ Options→ Others→ Speed dial Call divert Specify the conditions under which the call types should be diverted to another number. Menu→ Settings→ Call settings→ Call divert Call waiting Put the current call on hold to answer the other incoming call. Menu→ Settings→ Call settings→ Call waiting Call barring Restrict the dialing or receiving of certain calls. Menu→ Settings→ Call settings→ Call barred
10 Function Description Selection Minute beep Set Minute beep Menu→ Settings→ Call settings→ Minute beep Auto redial Set auto redial function. Menu→ Settings→ Call settings→ Auto redial Time and date Set the date and the time, and the date and time format. Menu→ Settings→ Phone settings→ Time & date Shortcut key Set the scrolling key as shortcut key of some menu. Menu→ Settings→ Phone settings→ Shortcut settings Keypad lock Lock the keypad automatically. Press # key, then * key to unlock. Menu→ Settings→ Phone settings→ Auto keypad lock Backlight Set the backlight time, when using the phone. Menu→ Settings→ BacklightPIN code Set or change the PIN code Menu→ Settings→ Security→ PIN Phone code Set or change the phone lock code. Menu→ Settings→ Security→ Phone locked Restore Switch to the factory default Menu→ Settings→ Security
11 Function Description Selection factory settings settings. The phone will clew input password, the password default 1234. → Restore factory settings Profiles Set profiles of your phone. Menu→ Settings→ Profiles Network Settings Set the way of searching network. Menu→ Settings→ Network selection Calculator Execute basic math calculation. Menu→ Tools→ Calculator Alarm clock Set alarm clock. Menu→ Tools→ Alarm FM radio Listen to FM radio. Menu→ Tools→ FM radio. STK SIM Card Tool Kit (various for different SIM card). Menu→ STK Warning and Maintenance • Some electronic devices are susceptible to electromagnetic interference sent by the phone if inadequately shielded. Keep using the phone at least 20 cm or as far away as you can from TV sets, radio and other automated office equipment so as to avoid electromagnetic interference. • Operating the phone may interfere with medical devices like hearing aides and pacemakers, or other medical devices in hospital. Consult a physician or the manufacturer of the medical device before using the phone. • Be aware of the usage limitation when using the phone at places such as oil
12 warehouses, or chemical factories, where there are explosive gases or explosive products being processed, because even if your phone is in idle state, it still transmits radio frequency (RF) energy. Therefore, power off your phone if required. • Do not touch the antenna while calling. Otherwise it will affect the quality of calling and waste battery energy. The damaged antenna will cause slight burn while touching your skin. • Keep the antenna free from obstructions and position the antenna straight up. This will ensure best call quality. • Keep the phone out of the reach of small children. The phone may cause injury if used as a toy. • Do not put other things on the terminal to avoid overlaying radiator. • Use original accessories or accessories that are authorized by the manufacturer. Using any unauthorized accessories may affect your phone’s performance, and violate related national regulations about telecom terminals, or even endanger your body. • As your phone can produce electromagnetic field, do not place it near magnetic items such as computer disks. • Do not expose your phone to direct sunlight or store it in hot areas. High temperature can shorten the life of electronic devices. • Prevent liquid from leaking into your phone. • Disconnect external power supply and do not use your phone during thunderstorm. • Unplug the external power adapter or remove battery when your phone is not in use, esp. for a long period of time. • It is highly recommended to charge the battery before initial use. The battery might have been discharged during storage and delivery. • Do not unplug the connector of the data cable from the phone, and not install or remove battery, when the power is on. • Do not attempt to disassemble the phone by yourself. Non-expert handling of the devices may damage them. • The phone is non-waterproof, keep it dry and store in shady and cool place. • If you want to clean your phone, please use clean fabric that is a bit wet or anti-static. Do not use harsh chemical cleaning solvents or strong detergents to
13 clean your phone, such as alcohol, dilution agent and benzene. Power off your phone before you clean it. Limited Warranty • This warranty does not apply to defects or errors in the Product caused by: i. Reasonable Router Appearance Disfiguration. ii. End User’s failure to follow ZTE’s installation, operation or maintenance instructions or procedures. iii. End User’s mishandling, misuse, negligence, or improper installation, disassemble, storage, servicing or operation of the Product. iv. Modifications or repairs not made by ZTE or a ZTE-certified individual. v. Power failures, surges, fire, flood, accident, actions of third parties or other events outside ZTE’s reasonable control. vi. Usage of products of third Parties, or usage in conjunction with third party products provided that such defects is due to the combined usage. vii. Any other cause beyond the range of normal usage for Products. End User shall have no right to reject, return, or receive a refund for any product from ZTE under the above-mentioned situations. • This warranty is end user’s sole remedy and ZTE’s sole liability for defective or nonconforming items, and is in lieu of all other warranties, expressed, implied or statutory, including but not limited to the implied warranties of merchantability and fitness for a particular purpose, unless otherwise required under the mandatory provisions of the law. Limitation of Liability ZTE shall not be liable for any loss of profits or indirect, special, incidental or consequential damages resulting from or arising out of or in connection with using of this product, whether or not ZTE had been advised, knew or should have known of the possibility of such damages, including, but not limited to lost profits, interruption of business, cost of capital, cost of substitute facilities or product, or any downtime cost. Troubleshooting
14 If your phone appears following phenomenon in the process of application, read following relative information at first. If the problems still can not be solved, please contact with the distributor or service provider. Problem Check Point When switching on the phone, it prompts Enter “PIN”. Input your PIN code which offered with SIM card together. If you have changed PIN code, input the new PIN code. When switching on the phone, it prompts “Emergency”. Check whether valid SIM card is inserted or not. When switching on the phone, it prompts Enter “Phone locked”. Enter lock code you set already to unlock the phone. No ring tone prompt for a incoming call. Check volume setting of ring tone. And check whether "mute" is set in Profiles. No display on screen when disconnect external power supply. Check whether the battery has electricity, or it is damaged; or power on the phone again. Press CALL/REDIAL key, but no number is sent. Check whether you have set call barring. Certain call cannot be received. Check whether the number is restricted. Cannot send short messages. Check the network condition, or
15 Problem Check Point message center setting.Other abnormal phenomenon. First refer to the user manual, and then check whether the power is connected correctly or not. If there is no problem, restart the phone. FCC Regulations: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment.
16 RF Exposure Information This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 20cm (8 inches) during normal operation.

Navigation menu