ZTE ZTEX175 CDMA 1X DIGITAL MOBILE PHONE User Manual ZTE X175 User Munual

ZTE Corporation CDMA 1X DIGITAL MOBILE PHONE ZTE X175 User Munual

USERS MANUAL

ZTE X175
CDMA 1X Digital Mobile Phone
User Manual
Copyright © 2007 by ZTE Corporation
All rights reserved.
No part of this publication may be excerpted, reproduced,
translated or utilized in any form or by any means, electronic or
mechanical, including photocopying and microfilm, without the prior
written permission of ZTE Corporation.
The manual is published by ZTE Corporation. We reserve the right
to make modifications on print errors or update specifications without
prior notice.
Version No.: Release 1.0*
Edition Time: Oct. 2007
Manual No.: 056584500xxx
ZTE
i
Content
1 General Information....................................................... 2
1.1 Welcome....................................................................................2
1.2 Security.....................................................................................2
1.3 Safety Warnings ..............................................................3
1.4 Limit Warranty..........................................................................8
1.5 Limitation of Liability...............................................................9
1.6 Declaration................................................................................9
2 Know Your Phone.......................................................... 10
2.1 Keypad....................................................................................10
2.2 Instruction of Interface Icon....................................................12
2.3 Technical Parameters...............................................................13
2.4 Battery.....................................................................................13
2.4.1 Remove and Installation of Battery .................................14
2.4.2 Charging the Battery........................................................15
2.5 Connecting to the Network .....................................................16
2.5.1 UIM Card ........................................................................16
2.5.2 Insertion and Extraction of UIM Card.............................17
2.5.3 Power on/off Phone .........................................................18
2.5.4 PIN Code.........................................................................18
ZTE
ii
2.5.5 Connecting the Network..................................................18
3 Basic Operations............................................................ 20
3.1 Making a Call..........................................................................20
3.2 Answering a Call.....................................................................21
3.2.1 Headset Ringing ..............................................................22
3.2.2 Headset Autoanwer..........................................................22
3.2.3 Setting any Key Answer..................................................22
3.2.4 Incoming Call Silence .....................................................23
3.3 In Conversation.......................................................................23
3.3.1 Silence in Conversation...................................................23
3.3.2 Adjusting Volume in Conversation..................................23
3.3.3 Selecting Options in Conversation ..................................23
3.4 Menu Functions ......................................................................24
4 Contacts.......................................................................... 26
4.1 Finding Records......................................................................26
4.2 Adding New Record................................................................28
4.3 Viewing Records.....................................................................30
4.4 Erasing Records ......................................................................30
4.4.1 Erasing a Record..............................................................30
4.4.2 Erasing all Contacts.........................................................31
4.5 Editing Name of the Contacts .................................................31
4.6 Editing Phone Number............................................................31
ZTE
iii
4.7 Selecting Group ......................................................................32
4.8 Setting Number Type ..............................................................32
4.9 Setting Speed Dial...................................................................32
4.10 Viewing and Making Speed Dial...........................................33
4.11 Memory Status ......................................................................33
4.12 Copying all Contacts.............................................................34
5 Messages......................................................................... 35
5.1 Sending a New Message .........................................................35
5.2 Sending Messages...................................................................36
5.3 Receiving Incoming Call while Editing Message ...................37
5.4 Reading Message ....................................................................37
5.5 Viewing OutBox .....................................................................38
5.6 Erasing Messages....................................................................38
5.6.1 Erasing a Message...........................................................39
5.6.2 Erasing all Messages .......................................................39
5.7 R-UIM.....................................................................................40
5.8 Sending Preformatted Messages .............................................40
5.9 Reading Voice Mail.................................................................41
5.10 Message Settings...................................................................41
5.10.1 Changing Voice Mail Box Number................................41
5.10.2 Message Alert................................................................42
5.10.3 Automatically Erasing InBox ........................................42
6 Recent Calls ................................................................... 44
ZTE
iv
6.1 Viewing Recent Calls..............................................................44
6.2 Erasing Recent Calls List........................................................45
7 Settings........................................................................... 46
7.1 Auto Key Guard......................................................................46
7.2 Supp.Services..........................................................................47
7.2.1 Call Waiting.....................................................................47
7.2.2 Call Forwarding...............................................................48
7.3 Sound......................................................................................49
7.3.1 Volume.............................................................................49
7.3.2 Alert Type........................................................................49
7.3.3 Ringer of Incoming Call..................................................50
7.3.4 Key Beep.........................................................................50
7.3.5 Key Tone Length .............................................................50
7.3.6 SMS Ringer.....................................................................50
7.3.7 ClockRinger Type............................................................51
7.4 Display....................................................................................51
7.4.1 Set Backlighting ..............................................................51
7.4.2 Changing Banner.............................................................51
7.4.3 Selecting Language .........................................................52
7.4.4 Adjusting Contrast...........................................................52
7.4.5 Setting Menu Format.......................................................52
7.4.6 Setting Time Format........................................................52
7.4.7 Screensaver......................................................................53
ZTE
v
7.5 Alert ........................................................................................53
7.6 Call Timers..............................................................................54
7.7 Security Settings .....................................................................54
7.7.1 Setting PIN Lock.............................................................55
7.7.2 Modifying PIN Code.......................................................55
7.7.3 Erasing All Recent Calls..................................................55
7.7.4 Erasing all Contacts.........................................................55
7.7.5 Restoring Factory Default ...............................................56
7.8 Accessories..............................................................................56
7.8.1 Setting Headset Ring.......................................................56
7.8.2 Setting Headset Autoanswer............................................57
7.8.3 Any Key Answer..............................................................57
8 Extra............................................................................... 58
8.1 Games .....................................................................................58
8.1.1 BlackJack ........................................................................58
8.1.2 Video Poker.....................................................................58
8.2 Stopwatch................................................................................59
8.3 Alarm ......................................................................................59
8.4 Calendar..................................................................................60
8.5 Calculator................................................................................60
8.6 Voice Memo............................................................................61
8.6.1 Recording in Normal.......................................................61
8.6.2 Recording in Conversation..............................................62
ZTE
vi
8.6.3 Recording with Incoming Call/Message..........................62
9 Text Input....................................................................... 64
9.1 Multitap Input .........................................................................65
9.2 Numbers Input ........................................................................65
9.3 eZiText Input...........................................................................66
9.4 Symbols Input.........................................................................66
10 Troubleshooting............................................................. 67
ZTE
1
Explanation for
Mobile Phone with/without RUIM Card
There are two types of ZTE CDMA Mobile phone, one need RUIM
card inserted and another does not need. Sections or functions in this
manual are for the phone with RUIM card. If your phone could be used
without RUIM card, please pay attention to the following items:
1. The phone can be used without the RUIM card.
2. Some functions are only available concerning with RUIM and
won't display, such as,
z The new contact can be saved only in Phone, not in RUIM.
z The new message can be saved only in Phone, not in RUIM.
z The message in Inbox can not be moved to RUIM.
z There is no PIN Lock function in Security Setting.
ZTE
2
1 General Information
1.1 Welcome
Thank you for choosing ZTE X175 CDMA 1X Digital Mobile Phone.
To guarantee the mobile phone always in its best condition, please
read this manual carefully and keep it for future use.
The pictures, symbols and contents in this manual are just for your
reference. They might not be completely identical with your phone.
Please subject to the real object. ZTE operates a policy of continuous
development and reserves the right to update and modify the technical
specifications in this document at any time without prior notice.
1.2 Security
If your mobile phone is lost or stolen, please report to your service
provider or agencies of banning the use of your lost UIM card and
phone, which will protect you from economic losses resulted from
unauthorized use.
You need to provide the phone’s ESN number labeled. You can
see ESN number after removing the battery. Please keep ESN
number for future use.
To prevent your mobile phone from illegal use, please take the
security measures as follows:
¾ Set PIN code of the UIM card.
ZTE
3
¾ Take it with you as you can.
1.3 Safety Warnings
To the Owner
Some electronic devices are susceptible to electromagnetic
interference sent by mobile phone if inadequately shielded, such
as electronic system of vehicles. Please consult the manufacturer
on the device before using the phone if necessary.
Operating of mobile phone may interfere with medical devices like
hearing aides and pacemakers. Please always keep the mobile
phone more than 20 centimeters away from such medical devices
when the phone is powered on.
The phone with internal antenna has been tested for compliance
with FCC RF Exposure (SAR) limits and is complied with FCC RF
exposure compliance requirements.
Do not carry the mobile phone in the breast pocket. Power the
mobile phone off if necessary. Consult a physician or the
manufacturer on the medical device before using the phone.
Be aware of the usage limitation when using a mobile phone at
places such as oil warehouses or chemical factories, where there
are explosive gases or explosive products being processed,
because even if your phone is in standby mode, it still transmits
radio frequency (RF) energy. Therefore, power off your phone if
required.
ZTE
4
Pay attention to traffic safety. Do not use your mobile phone while
driving. Park before making or answering a call.
Store the phone out of the reach of little children. The phone may
cause injury if used as a toy.
The phone complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) The phone may not cause harmful interference, and (2) the
phone must accept any interference received, including
interference that may cause undesired operation.
Mobile Phone
Please use original accessories or accessories that are
authorized by the manufacturer. Using any unauthorized
accessories may affect your mobile phone’s performance, and
violate related national regulations about telecom terminals, or
even endanger your body
If you want to clean your phone, please use clean fabric that is a
bit wet or anti-static. Do not use harsh chemical cleaning solvents
or strong detergents to clean it. Turn off your phone before you
clean it.
As your mobile phone can produce electromagnetic field, do not
place it near magnetic items such as computer disks.
Using the phone near electrical appliances such as TV, telephone,
radio and personal computer can cause interference, which
ZTE
5
affects the function of the phone.
Do not expose your mobile phone to direct sunlight or store it in
hot areas. High temperatures can shorten the life of electronic
devices.
Prevent liquid from leaking into your phone.
Do not drop, knock or harshly treat your phone. Rough handling
can break internal circuit boards.
Do not connect the phone with other unauthorized peripheral
equipments.
Do not attempt to disassemble the mobile phone and battery by
yourself. Non-expert handling of the devices may damage them.
Do not attempt to disassemble the mobile phone and battery by
yourself. Changes and modifications made to the phone without
the approval of manufacturer could void your authority to operate
this phone.
Do not charge the mobile phone without battery.
On occasion of emergent calling, keep your phone in status of
power on and in area of service. On the condition of standby,
press the key to enter emergency phone number, and then press
Send key to make a phone call.
Battery Using
The battery and the phone are separately deposited in the
package and packed in well condition. Please make use of the battery
ZTE
6
carefully following the instructions.
Do not short-circuit the battery, as this can cause excessive heat
and fire.
Do not store battery in hot areas or dispose of it in a fire to avoid
explosion.
Never use any charger or battery damaged or worn out.
Return the wear-out battery to the provider or put it in the
appointed recycle place. Do not put it in familial rubbish.
Warning: If the battery is broken, keep away from content. If it
taints your skin, wash your skin with abundant fresh water and
ask doctor for help if necessary.
Safety and General Using in Vehicles
Before making or answering a call, you should pay attention to
the local laws about using wireless mobile phones and take them
into account in practical use.
Safety airbag, brake, speed control system and oil eject system
shouldn’t be affected by wireless transmitting. If you do meet
problems above, please contact your automobile provider.
Please power off your mobile phone when refueling your
automobile, and so do the place where duplex wireless
equipments are banned. Don’t put your phone together with
flammable or explosive items, as inner spark may cause fire.
Exposure to radio frequency energy
Radio wave exposure and Specific Absorption Rate (SAR) information
ZTE
7
The handset is designed to comply with safely,
requirements for exposure to radio waves. This
requirement is based on scientific guidelines that include
safety margins designed to assure the safety of all persons,
regardless of age and health.
The radio wave exposure guidelines employ a unit of
measurement known as the Specific Absorption Rate, or
SAR. Tests for SAR are conducted using a standardized
method with the phone transmitting at its highest certified
power level in all used frequency bands.
While there may be differences between the SAR levels of
various ZTE phone models, they are all designed to meet
the relevant guidelines for exposure to radio waves.
The SAR limit recommended is 1.6W/kg averaged over
one(1) gramme of tissue.
The highest SAR value for this model phone tested by
MORLAB for use at the head is 1.569 W/kg(1g)
The highest SAR value for this model phone tested by
MORLAB for use at the body is 0.255W/kg(1g)
SAR compliance for body-worn operations is restricted to
belt-clips, holsters, or similar accessories that have no
metallic component in the assembly and which provide at
least 1.5 cm separation between the device, including its
antenna, and the users body
In Aircraft
Follow the restrictions in aircraft. Wireless devices can cause
interference in aircraft.
Please power off your mobile phone before taking off till landing. In
order to protect airplane’s communication system from
interference, it is never allowed to use mobile phone when it is in
ZTE
8
flight. Using mobile phone before the plane taking off should get
aircrew’s permission according to safety regulations.
1.4 Limit Warranty
The warranty does not apply to defects or errors in the product
caused by:
(a) Reasonable abrasion.
(b) Misuse including mishandling, physical damage, improper
installation, unauthorized disassembly of the product.
(c) Water or any other liquid damage.
(d) Any unauthorized repair or modification.
(e) Power surges, lightning damage, fire, flood or other events
outside ZTE’s reasonable control.
(f) Use of the product with any unauthorized third party
products such as generic chargers.
(g) Any other cause beyond the range of normal usage for
products.
End User shall have no right to reject, return, or receive a
refund for any product from ZTE under the above-mentioned
situations.
This warranty is end user’s sole remedy and ZTE’s sole liability
for defective or nonconforming items, and is in lieu of all other
warranties, expressed, implied or statutory, including but not
limited to the implied warranties of merchantability and fitness for a
ZTE
9
particular purpose, unless otherwise required under the mandatory
provisions of the law.
1.5 Limitation of Liability
ZTE shall not be liable for any loss of profits or indirect, special,
incidental or consequential damages resulting from or arising out of or
in connection with using this product, whether or not ZTE had been
advised, knew or should have known the possibility of such damages.
1.6 Declaration
We, ZTE Corporation, declared that the product is installed with
battery separately in the box.The FCC ID label is placed on the mobile
phone clearly visible to all persons at the time of purchase.
ZTE
10
2 Know Your Phone
2.1 Keypad
Key Tip Function Description
Send key
Make or answer a call.
Press Send key in standby mode to
enter All Recent Calls list.
Press Send key two times directly
to redial the last number.
Microphone
Earpiece
LCD screen
4-way scroll key
Send key
0~9 Number key
* key
End key
Charger connector
O
K
ke
y
Clear key
# key
Earphone
ZTE
11
End key
End an active call or reject a call.
Power on/power off.
Exit from any interface to standby
mode.
Clear key
Erase character(s) while editing.
Cancel operation, eixt to previous
pop-up window.
In standby mode, hold Clear key to
lock keypad.
OK key
Enter main menu in standby mode,
as shown on the screen.
Switch to options of submenu.
Confirm the character chosen while
character inputting.
Up/Down key
(Scroll key)
Scroll the cursor up and down.
Used as selection key up and
down for keying in commands
and selecting options shown on
the display.
In standby mode, hold Up key to
set Silence All; Press Down key
to enter Messages menu.
Adjust volume in conversation.
Used as direction key in games.
ZTE
12
Left/Right key
(Scroll key)
Scroll the cursor left and right.
Used as selection key to scroll
cursor left and right for keying in
commands and selecting options
shown on the display.
In standby mode, press Left key
to enter Extra menu, press Right
key to view All Contacts.
Used as direction key in games.
~
0~9 Number
key
Key in numbers or characters.
Make a speed Dial call.
*key，#key
Differs in different mode, option or
function menu.
Note: To “press” the key in this manual means to press the key
and release it. To “hold” the key means to keep pressing the key for two
seconds or more.
2.2 Instruction of Interface Icon
Icon Indication
Signal strength
Incoming call or calling
Keypad locked
Roaming
ZTE
13
New message
Vibration
Silence All
Alarm
Power indicator
2.3 Technical Parameters
Handset
Type ZTEX175
Dimensions (Width×Height×Thickness)
44 mm×101mm×13.4mm
Weight About 73g(Battery Included)
Battery 850mAh / Li-Ion
Continuous standby
time
About 80h～160h (Subject to Network)
Continuous talk time About 2h～4h (Subject to Network)
Note: Please refer to the real phone for other relative parameters
of the battery and charger.
2.4 Battery
The attached Li-ion battery along with the phone can be used after
unpacking. For the first three times, please use up the power and
charge it fully for a new battery to perform well.
ZTE
14
2.4.1 Remove and Installation of Battery
Remove：(1) Press and push the back-cover of the phone down to
release and remove it off the phone. (2) Put finger on the top
finger grip, and then lift up the battery from the finger grip to
remove the battery.
Installation：(1) Replace the battery into the battery slot, to be
noted that the lower end of the battery firstly inserted. (2) Put
the back-cover of the phone flatly upon the body of phone. Direct
the back cover towards the locking catches on the both sides of
the phone and push the back-cover of the phone upward to lock
the cover into its place.
ZTE
15
2.4.2 Charging the Battery
Plug out rubber away (turn 180° as shown in the picture)from
the jack on the bottom of the handset and connect the lead from
the charger to the socket on the bottom of the phone. (Note:
The side with arrow should be upright while connecting).
Connect the charger to a standard AC socket.
Meanwhile, the charging indicator in up-right corner of the
display flops cyclically, indicating the charging is going. In
power-off mode while charging, the display only shows the
charge indicator. If the battery is completely flat in storage or
used up, it may take for a while before the charging indicator
appears on the display or any calls can be made.
When the charging indicator on the screen stops flopping, the
charging is completed. The charging takes usually up to 2～3
hours. In the process of charging, it is a normal phenomenon
that the battery, phone and charger get into hot accordingly.
After the completion of charging, disconnect the charger from
the phone and AC socket.
ZTE
16
Note：
When it is in charge, place the phone on condition of good
ventilation and temperature between -5℃～＋45℃. Ensure to
use the charger offered by the manufacturer. Using unauthorized
charger may cause danger and violate the authorization of the
phone and the guarantee article.
When the phone is automatically switched off or indicates the
alarm information of power shortage, please charge the battery in
time.
The duration time of the standby status or conversation of the
phone is based on ideal working environment. In practice, the
working time of battery varies with network condition, working
environment and application methods.
2.5 Connecting to the Network
2.5.1 UIM Card
Before using the phone, please insert effective UIM (User Identity
Module) card into the phone.
All the information related to the network connection is recorded
in the metal plane area of UIM card together with the information you
stored in your Contacts in the UIM card. The UIM card can be inserted
into any CDMA phone to use (new phone automatically reads UIM
card).
Please do not touch the metal plane area of the card to avoid
ZTE
17
missing and damaging information in the card and put UIM card in
place far away from electricity and magnetism.
Warning：Please power off the phone before taking out UIM card.
It is prohibited to insert or take out UIM card in the condition of
connecting with external power.
2.5.2 Insertion and Extraction of UIM Card
Power off the phone, remove the battery and other external
power.
Insert UIM card into UIM card holder at first, and then insert
UIM card holder into UIM card slot in the phone.
Put finger on the finger grip of UIM card holder，pull out UIM
card holder out of slot. And then remove UIM card away from
UIM card holder, as shown in picture hereinafter.
ZTE
18
2.5.3 Power on/off Phone
Press and hold End key to power on/off the phone.The phone will
check whether UIM card inserted well or not. And then follow the
prompt indication on the display:
Enter PIN——Key in PIN code of UIM card if it is set.
Searching——Search appropriate network connected.
2.5.4 PIN Code
To set PIN code (personal identification number) is to avoid the
illegal usage of UIM card.
To input PIN code of UIM card and press OK key to confirm to
start on using phone. If inputting wrong PIN three times continuously,
UIM card will be locked by network.
Note：The network provider offers you PIN code (four to eight
digits). You should change PIN code as soon as possible for security.
To set PIN code, see “7.7 Security Settings”.
2.5.5 Connecting the Network
After powering on and inputting PIN code, the phone
automatically searches the network available and in state of standby
mode.
ZTE
19
Besides sending and receiving calls, you can also do:
Press OK key to enter main Menu.
Hold Clear key to lock phone’s keypad.
Hold Up key to set the phone in Silence All.
Press Down key to enter Messages menu.
Press Left key to enter Extra menu.
Press Right key to view All Contacts.
Press Send key to enter All Recent Calls.
ZTE
20
3 Basic Operations
3.1 Making a Call
Please ensure that you are in the place where the signal can be
received. Examine network signal strength icon in the upper left corner
of the screen.
The more the indication bars, the stronger the intensity of receiving
signal is. If there is no bar, please move to the place where the intensity
of receiving signal is better. Sometimes, you only need to change the
direction.
Making a National Call
Press Number key to key in phone number, and add area code
when making a long distance call (no need to add area code
when dialing local number in some area). Press Send
key to call out. Press End key to end the call
and conversation.
Making an International Call
Enter the country code, area code (without the leading “0”) and
ZTE
21
the complete telephone number you want to dial, press Send
key to call out.
Before the country code, hold a certain number key, e.g. “0” key
to enter the international prefix “+” (the “+”character replaces
the international access code) or key in international prefix e.g.
“00” of international call directly.
Making Recent Calls
All calls you recently dialed, received or missed are saved in
your phone. All numbers are grouped as Missed Calls, Incoming
Calls and Outgoing Calls. When the list is full, the oldest
number will be erased automatically when new record is
coming.
You can check the list as follows:
In standby mode, press Send key to view All Recent
Calls.
The number in listed can be directly dialed by pressing
Send key .
3.2 Answering a Call
When a call is incoming in standby mode, the phone will offer
Country code + Area code + Telephone number
0086 755 26770000
ZTE
22
corresponding ringer or vibration to prompt according to your settings.
With the number already saved in Contacts, the phone also shows the
name of caller meanwhile.
• Press to answer an incoming call.
• Press to end a call and the call duration is temporarily
displayed.
See “7.8 Accessories” or refer to other ways of answering calls for
your option as follows.
3.2.1 Headset Ringing
• Select Menu→ Settings→ Accessories→ Headset Ringing.
• Select On/Off, and press OK key.
3.2.2 Headset Autoanwer
You can set headset to answer an incoming call automaticlly.
• Select Menu→ Settings→ Accessories→ Headset Autoanwer
• Select Off, 2 seconds, 5 seconds, 10 seconds, and press OK
key.
3.2.3 Setting any Key Answer
• Select Menu→ Settings→ Accessories→ Any Key Answer.
• Select On, and press OK key.
An incoming call can be answered by pressing any key except End
key.
ZTE
23
3.2.4 Incoming Call Silence
• When a call is coming, press OK key to select Silence to mute
the ringer tone.
• This function silences the current incoming call only. The phone
will ring normally as next call coming.
3.3 In Conversation
3.3.1 Silence in Conversation
During conversation, you can select Menu or Mute displayed.
Select Mute to let the other party temporarily not hear your voice;
Select Unmute back to normal. You can also enter Menu in a
conversation.
3.3.2 Adjusting Volume in Conversation
Press Up/Down key to adjust volume of Earpiece during a
call.
3.3.3 Selecting Options in Conversation
During a call, press Left/Right key and OK key to select
options of SPK.ON/ Normal, Mute/Unmute, Record, Menu for options.
Select SPK.On/ Normal set phone Speaker on/off.
Select Mute/Unmute to let the other party temporarily can
ZTE
24
or can not hear your voice.
Select Record to make a record of conversation with 5
pieces in Max.
Select Menu for options in Menu, such as Contacts, with
no worry about the ending of conversation.
3.4 Menu Functions
Main Menu Function:
i. In standby mode, press OK keyto enter main Menu.
ii. Scroll Up/Down or Left/Right key through the menu and select
functions according to the prompt on the screen.
iii. If the menu contains submenus and further submenus, select
options and submenu you want according to the prompt on the
screen.
iv. Press OK key or Clear key to set or return to the previous menu.
Press End key to exit to standby mode.
Bottom Menu Function:
If options are displayed on the bottom of the screen, press OK key
and then Left/Right key to select. Press OK key or Clear key to
set or exit.
The functions of phone are mainly grouped in main Menu:
Contacts, Messages, Recent Calls, Settings, and Extra.
ZTE
25
Please refer to the text hereinafter in this manual in detail.
Note: The picture used in this manual are with small icons.
ZTE
26
4 Contacts
You can save contacts in phone and UIM card. Each contact in
phone’s memory has three phone numbers, one e-Mail, one address
and one personal web page. Select Memory Status to view memory of
handset and UIM card.
4.1 Finding Records
You can search for a name or number in Contacts in pop-up
window by choosing:
In All Contacts
1. Select Menu → Contacts.
2. Select View All. You can key in the first characters of the name
you are searching for to view contact directly in All Contacts.
3. Press Up/Down key to scroll through the corresponding name(s)
and records in the list. Scroll to the name you want, and press OK key
to view the details.
ZTE
27
Find
1. Select Menu → Contacts.
2. Select Find. You can key in total or any part of the the name you
are searching for. You can also switch between Find, Text input mode
(Abc, etc.), Cancel by pressing OK key and Right /Left key. And then
press OK key to find.
3. Press Up/Down key to scroll through the corresponding name(s)
and records in the list. Scroll to the name you want, and press OK key
to view the details.
In Standby Mode:
To quickly find phone number in Contacts in standby mode,
press Right key or directly key in total or any part of the phone
number and select Find, and /or scroll to the name you want.
All the contacts will be list by the letter of the name. If no contact in
the list, “No contacts found” will be displayed.
Note: You search for the name or number you want to edit. Press
Options and select Add New (not for UIM card), Edit Name, Classify
Contact (not for UIM card), or Erase Contact, to add new contact,
edit the name, number, or text and press OK key.
ZTE
28
4.2 Adding New Record
Save to Phone:
1. Select Menu→ Contacts→ Add New
2. Select would-be added information: Phone, Email, Address,
and Web Page.
3. Press OK key twice to select Next, then Enter name of the
contact. See “10. Text Input” more instructions for writing text
and character.
4. After the completion of writing, select Next.
5. Scroll to the just-added phone number to reedit，press OK key.
Further operation can be executed, such as:
Edit：Edit the number.
Erase: Delete the number.
Send SMS Message: Send message to this number.
Number Type: Set number’s type.
Save to R-UIM: Save in UIM card.
Add to Speed Dial: Assign a speed dial number to the
phone number.
6. Scroll to Options and press OK key
Add New: Add new information.
Edit Name：Edit Contact name.
Classify Contact: Group records into Personal or
Business.
ZTE
29
Erase Contact：Erase this new contact record.
When you Add new Email, Address or Web Page and press OK
key, you can：
View Address：View the Email, Address or Web Page in
detail.
Edit：Edit the Email, Address or Web Page.
Erase：Erase the Email, Address or Web Page.
Add to UIM Card:
1. Select Menu→ Contacts→ Add to R-UIM.
2. Key in Phone Numbers, and press OK key twice to select
Next, then Enter name of the contact. See “9. Text Input” more
instructions for writing text and character.
3. After the completion of writing, select Next.
4. Scroll to the just-added phone number to reedit, press OK key.
Further operation can be executed, such as, Edit, Send SMS
Message, Save to Phone, Add to Speed Dial.
5. Scroll to Options, and press OK key.
- Edit Name： Edit Contact name.
- Erase Contact: Erase this new contact.
Note: In standby mode, key in phone number, press Left/Right
key to select New, To Existing, To RUIM, Find, and then press OK
ZTE
30
key to add new record or search for record.
If you save the same number again, the phone prompts to remind
you this number is already exist.
4.3 Viewing Records
1. Select Menu→ Contacts.
2. Select following option, you can view the corresponding records
in list.
－View All：All records in phone and UIM card.
－R-UIM： All records in UIM Card.
－Personal： All records in personal group.
－Business： All records in business group.
Note: When there is no storage record in Contacts, it will indicate
“No contacts found”.
4.4 Erasing Records
4.4.1 Erasing a Record
1. Select Menu → Contacts.
2. Select View All or Find to search for would-be erased record.
3. Scroll to the record you want to erase and press OK key.
4. Select Options to Erase Contact, and press OK key. “Erase
Contact?” indicated on the display.
5. Press OK key to select Yes.
ZTE
31
4.4.2 Erasing all Contacts
You can erase all the records in Contacts
See “7.7 Security Settings” for the details.
4.5 Editing Name of the Contacts
1. Select Menu→ Contacts.
2. Select View All or Find to search for would-be edited record.
3. Scroll to the record you want to edit and press OK key.
4. Select Options to Edit Name, and press OK key.
5. Press Clear key to erase character of the current name, and
rewrite the name.
6. Select Save, “Contact Saved”appears on the display.
4.6 Editing Phone Number
1. Select Menu→ Contacts.
2. Select View All or Find to search for would-be edited record.
3. Scroll to the number you want to edit and press OK key.
4. Select Options to Edit number, and press OK key.
5. Press Clear key and press number key to erase and key in digit
of phone number.
6. Press OK key twice and select Save. “Number Saved” appears
on the display.
ZTE
32
4.7 Selecting Group
You can group the stored records into Personal and Business.
1. Select Menu→ Contacts.
2. Select View All or Find to search for would-be edited record in
phone’s memory, and press OK key.
3. Select Classify Contact and press OK key.
4. Select Personal or Business and press OK key. “Contact
Saved” appears on the display.
4.8 Setting Number Type
1. Select Menu→ Contacts.
2. Select View All or Find to search for would-be edited record in
phone’s memory and press OK key.
3. Select number, press OK key, and select Number Type.
4. Select the type of number: Work, Home, Mobile, Pager or
Other and press OK key.
4.9 Setting Speed Dial
In standby state, you can make a Speed Dial of stored number by
keying in one or two-digit digit (2-99).
1. Select Menu→ Contacts
2. Select View All or Find to search for the record you want to set
as speed dial number, press OK key, and then move to number in
window, and press OK key.
ZTE
33
3. Scroll to select Add to Speed Dial and press OK key.
4. Select an Empty slot in list.
5. Press OK key. “Contact added” appears on the display.
4.10 Viewing and Making Speed Dial
Viewing：
Select Menu→ Contacts→ Speed Dial List, all Speed Dial list
indicated.
Dialing：
When you select one phone number in the Speed Dial List, you
can press Send Key to dial. You can also make a call by entering
speed dial number in the standby mode.
Method 1: Enter speed dial number, press Send Key to dial.
Method 2: Directly hold the Speed Dial Number digit key. If the
Speed Dial Number is one-digit, directly hold the digit key. If the Speed
Dial Number is two-digit, press first digit key and then hold the second
one. For example: If the Speed Dial Number is 25, you should press 2
key firstly, and then hold 5 key, thus it can dial directly.
Note: Some handset may not support method 1. Some handset
support only one-digit speed dial number, some support both one-digit
and two-digit speed dial number.
4.11 Memory Status
1. Select Menu→ Contacts→ Memory Status.
ZTE
34
2. View the number of saved entries and maximum number of
entries saved in phone and UIM card.
For example: phone: 8/200, UIM Card: 4/150, indicating that 200
records entries in Max., out of which eight have be saved in phone. And
150 entries in Max., out of which four have been saved in UIM Card.
Please consult with service supplier for storage capacity of UIM card.
4.12 Copying all Contacts
1. Select Menu→ Contacts→ Copy All.
2. Copy all contacts as follows:
Phone To UIM: Copy all contacts of the phone’s memory to
UIM card
Note: This function can copy all the contract records to UIM card,
and all the different records or numbers under the same name will be
copied accordingly to UIM card one by one as different records.
UIM To Phone: Copy all contacts in UIM card to the phone’
memory.
Note: This function can copy all the contract records to the
phone’s memory, and all the different records with same name will be
copied accordingly to the phone’s memory.
ZTE
35
5 Messages
This is introduction of how to send, receive and erase the
messages in your phone.
Note：The function introduced hereinafter may differ with different
service offered in your area. Please consult with your service provider
for more detailed information.
5.1 Sending a New Message
Please consult with the service provider to support the network
service of sending message. You can only send message to the mobile
phone which can receive message.
1. Select Menu→ Messages→ Create Message.
2. Input the recipients’ Phone Number
- Or -
Select phone number from Contacts (in pop-up window of number
input, press OK key, and Left/ Right key to scroll to Contacts),
Numbers, and then press OK key to select the phone number you want
to send message to and press OK key.
ZTE
36
3. Select Continue to Write message text. See “10. Text Input”
more instructions for writing text and character.
4. When you finish writing message, press OK key to select
message Priority: Interactive, Normal, Urgent, Emergency.
The default priority is Normal.
5. Select Continue and
Send, and press OK key to send message.
Save, and press OK key to save message in OutBox.
Send to multireceiver, and press OK key to send messages to
all the receivers. Scroll to Add receiver, inputting recipients see “5.2
Sending Messages” for details.
Note: The SMS centers of some cities and regions do not support
messages longer than 160 characters.
5.2 Sending Messages
You can send messages to grouped mobile phone which can
receive message meanwhile.
1. Select Menu→ Message→ Send To Multi.
2. Select Add Receiver, press OK key and key in Phone Number
- Or -
Select phone number from Contacts (in pop-up window of number
input, press OK key, and Left/ Right key to scroll to Contacts), press
OK key and select all the phone numbers you want to send message to,
and press OK key.
ZTE
37
3. All the phone numbers displayed in List OK in pop-up window
can be reedited. The maximum of receivers not exceed 10
persons.
4. When you finish editing and writing, select Continue, and
press OK key to Send to all the recipients.
5.3 Receiving Incoming Call while Editing Message
• If you do not want to receive the incoming call, press End key.
• If you want to receive the incoming call, press Send key. The
message you are editing will be saved to OutBox. After finishing
receiving call, you can find the message in OutBox and continue to edit
and send it.
5.4 Reading Message
On receipt of a new message, the phone prompts you by vibration
or ringer (up to silence and ringer in Settings). The display indicates
“MESSAGE!” and press OK key to view. New message is automatically
saved in phone. A character on display indicates the memory for
message is reaching full. Erase old messages to keep space for new
messages.
1.Select Menu→ Messages→ InBox (select UIM Card to view the
message saved in UIM Card).
2. Scroll to the message you want to read.
3. Press OK key to read message. Display automatically scrolls
page by page. You can also press Up/Down key to scroll.
ZTE
38
4. After reading, press Left/Right key to select:
－Next： View the next message.
－Erase：Erase this message.
－Forward： Forward the message to other recipients.
－Reply： Reply message to sender.
－Sender：Call back or reply message to sender or save sender’s
number. Select Call to call back, select Reply to reply message to
sender, select New to save sender’s number to contacts, select To
Existing to save the sender’s number to existed records in the contacts.
Select To RUIM save message in UIM Card.
－Move to RUIM：Move message to UIM Card.
5.5 Viewing OutBox
1. Select Menu→ Message→ OutBox.
2. Scroll Message List.
3. Press OK key to read message.
4. Select OK to return to the list. Select other options to Erase,
Send, Forward and Edit the message.
5.6 Erasing Messages
Delete and erase old messages to release space for phone’s SMS
memory. You can select erasing messages when sending or reading
messages; erase messages one by one or all in InBox, OutBox and
UIM Card.
ZTE
39
5.6.1 Erasing a Message
1. Select Menu→ Messages.
2. Select messages location: InBox, OutBox or R-UIM.
3. Press Up/down key to select to-be-erased messages.
4. Select Erase to erase messages. “Erase this message?”
appears.
5. Select Yes to erase this message.
5.6.2 Erasing all Messages
1. Select Menu→ Messages→ Erase Messages.
2. Select an option in list:
- No：Return to previous pop-up window.
- Entire InBox： Erase all messages in InBox. If deletion is
selected, the prompt of “Entire InBox?” appears.
Select Yes to erase. Select No to return to previous pop-up
window.
- Entire OutBox： Erase all messages in OutBox. If deletion is
selected, the prompt of “Entire OutBox?” appears. Select Yes to
erase. Select No to return to previous pop-up window.
- Entire R-UIM： Erase all messages stored in UIM Card. If
Delete is selected, the prompt of “Entire R-UIM?” appears.
Select Yes to erase. Select No to return to previous pop-up
window.
- Old InBox： Erase all the read messages in Inbox. If deletion
ZTE
40
is selected, the prompt of “Erase all old Inbox messages?”
appears. Select Yes to erase. Select No to return to previous
pop-up window.
5.7 R-UIM
The phone can move messages received to UIM card, see “5.4
Reading Message”.
Viewing message in UIM card:
1. Select Menu→ Messages→ R-UIM.
2. Scroll to the message you want to read.
3. Press OK key to read message. Display automatically scrolls
page by page. You can also press Up/Down key to scroll.
4. After reading, press Left, Right key to select:
－OK： Exit to the previous message list.
－Erase：Erase this message.
－Sender：Call back or reply message to sender or save sender’s
number. Select Call to call back, select Reply to reply message to
sender, select New to save sender’s number to Contacts, select To
Existing to save the sender’s number to existed records in the
Contacts. Select To RUIM save message in UIM Card.
－Move to Inbox：Move message to InBox.
－Forward： Forward the message to other recipients.
5.8 Sending Preformatted Messages
The phone has a group of some common built-in phrases and
ZTE
41
sentences, such as, “Call me”, “Can I call you?” etc.
1. Select Menu→ Messages→Preformatted Msg.
2. Scroll to the message you want to send.
3. Press OK key to key in phone number or select in Contacts.
4. Press Ok key to edit, save and send message, see “5.1 Sending
a new message” in detail.
5.9 Reading Voice Mail
Before using Voice Mailbox, please consult with network provider
to confirm that the function of voice mail box has been activated. After
your successful setting, network will automatically transfer divert
incoming call(s) to your voice mail box, and send message(s) to your
phone.
Select Voice Mail to read the message and then dial voice mail
box number to listen to the leaving message following guide prompt.
To read your voice mail, press for seconds to dial voice
mail box number in standby mode.
Note: The function needs network support.
5.10 Message Settings
You can set your message box before you use it.
5.10.1 Changing Voice Mail Box Number
1. Select Menu→ Messages→ Messages Settings→ Voice Mail
Number.
ZTE
42
2. If the voice mail box has not been set, press OK key to select
Yes, and then add directly.
3. If the number has been set, select Edit to edit and press OK
key.
4. After inputting voice mail number, press OK key twice to
confirm.
Note：Please consult with your network operator for the number of
voice mail box.
5.10.2 Message Alert
You can select the alert type to prompt on receipt of new message.
1. Select Menu→ Messages→ Message Settings→ Message
Alert.
2. Select an option in list:
- Alert Once：Phone rings once.
- Alert & Remind：Phone dings once every one minute.
3. Press OK key.
Note：To select option in Settings as Off or Vibration, it follows
the setting of silence option of Settings.
5.10.3 Automatically Erasing InBox
Set erasing the last read message in Inbox automatically when
Inbox is full.
1. Select Menu→ Message→Message Settings→ Auto Erase
InBox.
ZTE
43
2. Select Enable or Disable and press OK key.
ZTE
44
6 Recent Calls
6.1 Viewing Recent Calls
Information of Missed Calls, Incoming Calls, Outgoing Calls, All
Recent Calls including name, phone number, and call time and
conversation duration is saved in the Recent Calls.
1. Select Menu→ Recent Calls.
2. Select Missed Calls, Incoming Calls, Outgoing Calls or All
Recent Calls.
3. Press OK key.
4. Select one entry of the records and press OK key.
5. Select option:
- Call Information ：Indicate number, time and conversation
duration.
- Delete Entry：Erase the number from the list of Recent Calls.
- Send SMS Message：Send message to this number.
- Save New：Save the number in mobile phone’s Contacts.
ZTE
45
- Save To Existing：Add this number to the existed record in the
Contacts.
- Save to R-UIM： Save this number in UIM Card.
If the UIM Card does not support the function of Incoming Call
Indication, you can only see part of the above-mentioned options.
6.2 Erasing Recent Calls List
You can erase all the Recent Calls in the menu of Recent Calls.
1. Select Menu→ Setting→ Security.
2. Input PIN Code and press OK key.
3. Select Erase All Recent Call List?. The screen indicates
“Erase All Recent Call List?”
4. Select Yes to erase all.
- Or -
1. Select Menu→ Recent Calls.
2. Select Missed Calls, Incoming Calls, Outgoing Calls or All
Recent Calls.
3. Press OK key.
4. Select one entry of the records and press OK key.
5. Select option:
- Delete Recent Calls：Select “Yes” to delete all the numbers
from the list of Missed Calls, Incoming Calls, Outgoing Calls or All
Recent Calls.
ZTE
46
7 Settings
In main Menu pop-up window, select Settings to enter into.
Your phone has different functions in Settings to meet your
requirement. They are: Auto Key Guard, Supp. Services, Sound,
Display, Alert, Call Timers, Security and Accessories.
7.1 Auto Key Guard
1. Select Menu→ Settings→ Auto Key Guard to set phones’ key
lock and time.
2. Select an option in pop-up window:
－Off：Deactivate the function of phones’ key lock.
－30 seconds：Phones’ key locked automatically 30 seconds after
the last key pressing.
－2 minutes：Phones’ key locked automatically 2 minutes after the
last key pressing.
－5 minutes：Phones’ key locked automatically 5 minutes after the
last key pressing.
3. Press OK key to confirm.
ZTE
47
Note：
- Hold Clear key to lock the keypad directly in standby mode.
- In state of key lock, to make use of phone, unlocking code should
be input prompted by phone on the display.
7.2 Supp.Services
When network supports Supp. Services, you can use network
services of call waiting and call forwarding.
Note：All these functions are network services. Please consult with
network service provider to get corresponding service application.
7.2.1 Call Waiting
During a call, use Call Waiting to answer the waiting call, or dial
another call meanwhile putting the first call on hold. These calls can be
shifted while you have calls in conversation.
Call Waiting lets you enjoy three-party conversation without
missing call.
1. Select Menu→ Settings→ Supp.Services→ Call Waiting.
2. Select Activate to activate the Call Waiting function. The
network will notify you of an incoming call while you have a call in
progress. You can press Send key to get through the waiting call and
switch one call to another.
3. Select Deactivate to cancel the Call Waiting function.
4. Select Cancel to exit to the previous pop-up window.
ZTE
48
7.2.2 Call Forwarding
Use Call Forwarding to forward the incoming call to a designated
phone number. After setting of call forwarding, phone will automatically
dial network to set the function in active.
1. Select Menu→ Settings→ Supp.Services→ Call Forwarding.
2. Set types of Call Forwarding, press OK key.
－ALL(Divert unconditionally): All is diverted in all conditions.
－Busy(Divert when busy): When the phone is busy, divert.
－No Answer(Divert when no answer): When there is no
answer, divert.
－Default(Busy/NA): When the phone is busy or there is no
answer, divert. The service provider offers.
－Cancel All：Cancel All Call Forwarding.
－Number：Input the destination number to which the call will
be transferred.
3. Select Activate to:
Enter Number and press OK key. Input the number to which
the phone will forward. E.g. To forward incoming call to
12345678, input: 12345678, press OK key twice and
confirm.
Continue to press OK key to Activate. If the number has
been set, directly press OK key to select Activate.
4. Select Deactivate to disable Call Waiting function.
5. Select Cancel to exit to previous pop-up window.
ZTE
49
7.3 Sound
7.3.1 Volume
You can adjust the volume of Ringer, earpiece and key beep.
1. Select Menu→ Settings→ Sound→ Volume.
2.Select Ringer (When earpiece is inserted, it is earpiece Ringer),
Earpiece or Key Beep.
3. Press Up/ Down key or Left/ Right key to adjust volume. Press
OK key.
7.3.2 Alert Type
You can select alert type for an incoming call, earpiece and
message.
1. Select Menu→ Setting→ Sound→ Alert type.
2. Select an option in list：
－Off： Set mobile phone in silence case with backlighting to
prompt.
－Ringer： Set Mobile phone in Ringer case to prompt.
－Vibration： Set mobile phone in vibration case to prompt.
－Vibra + Ringer：Set mobile phone in ten-second vibration case,
then continuous Ringer later to prompt incoming call.
Note: Type of “Vibra + Ringer” for message is as same as type of
“Vibration”.
ZTE
50
7.3.3 Ringer of Incoming Call
ZTEX175 offers various Ringers of incoming call for your selection.
1. Select Menu→ Settings→ Sound→ Ringer Type.
2. Press Up/Down key to scroll to your selection, press OK key.
7.3.4 Key Beep
Set phone beep sound or not when you press keys.
1. Select Menu→ Settings→ Sound→ Key Beep.
2. Select an option:
－Tones： Utter sound when press keys.
－Off： Not utter sound when press keys.
7.3.5 Key Tone Length
Set phone utter sound long or not when press keys.
1. Select Menu→ Setting→ Sound→ Key Tone Length.
2. Select an Option：
－Normal： Utter a fixed- length DTMF tone in short.
－Long：Utter DTMF tone even longer.
7.3.6 SMS Ringer
You have a choice of various ringing tones for message in phone.
1. Select Menu→ Settings→ Sound→ SMSRinger Type.
2. Press Up/Down key to scroll to select and press OK key.
ZTE
51
7.3.7 ClockRinger Type
You have a choice of various ringing tones for alarm in phone.
1. Select Menu → Settings→ Sound→ ClockRinger Type.
2. Press Up/Down key to scroll to select and press OK key.
7.4 Display
7.4.1 Set Backlighting
During a call or pressing keys, the display lights on. You can set
lighting duration and type.
1. Select Menu→ Settings→ Display →Backlighting.
2. Select an option in pop-up window:
－Off：Turn off backlighting.
－10s：Keep backlighting for 10 seconds after last pressing.
－30s：Keep backlighting for 30 seconds after last pressing.
－10s and in call: Keep backlighting for 10 seconds after last
pressing and during a call.
－30s and in call: Keep backlighting for 30 seconds after last
pressing and during a call.
3. Press OK key to confirm.
Note：In conversation, backlighting consumes the power quickly
and shortens continues conversation and standby time.
7.4.2 Changing Banner
View and edit phone’s greeting to which appears on the display to
ZTE
52
your own.
1. Select Menu→ Settings→ Display→ Banner.
2. Press OK key to Edit.
3. Key in character(s) and press Clear key to erase character(s).
4. Press OK key twice to Save.
7.4.3 Selecting Language
1. Select Menu→ Settings→ Display→Language.
2. Select English which is available, and press OK key.
7.4.4 Adjusting Contrast
1. Select Menu→ Display→ Contrast.
2. Press Up/Down key or Left/Right key to adjust contrast, and
press OK key.
7.4.5 Setting Menu Format
1. Select Menu→ Settings→ Display→ Menu Format.
2. Set Menu Format as Large Incons or Small Incons, and press
OK key.
7.4.6 Setting Time Format
1. Select Menu→ Settings→ Display→ Time Format.
2. Select AM/PM or 24 HR, and press OK key.
ZTE
53
7.4.7 Screensaver
Select Menu→ Settings→ Display → Screensaver. You can
set screensaver duration and type.
1. Select Type, press OK key. And then select None to
deactivate screen save or select type as Digital Clock.
2. Select Timeout, press OK key. Select an option in pop-up
window:
－30 seconds： Automatically activate screen save 30 seconds
after last key pressing.
－2 minutes：Automatically activate screen save 2 minutes after
last key pressing.
－5 minutes：Automatically activate screen save 5 minutes after
last key pressing.
3. Press OK key to confirm.
7.5 Alert
You can select Enable or Disable to set the alert.
1. Select Menu→ Settings→ Alert.
2. Select an option on display and press OK key.
－Missed Call： When there are missed calls, alert.
－Roaming： When roam in active and handoff between service
areas or states occurs, alert.
－Minute Alert：During a call, ten seconds ahead of every minute,
alert.
ZTE
54
For the function mentioned above, select Enable to operate; select
Disable to cancel alert.
7.6 Call Timers
Your phone can record call time of dialing and answering call.
1. Select Menu→ Settings→ Call Timers.
2. Select an option on display and press OK key.
－Outgoing Calls：Indicate call time of all dialed call. The timer
can be reset.
－Incoming Calls：Indicate call time of all answered call. The timer
can be reset.
－All Calls：Indicate call time of all dialed and answered call. The
timer can not be reset.
3. Select Reset to clear data, the timer is set to zero.
7.7 Security Settings
Introduction to phone’s security options preventing others to avoid
illegal use or acquire your phone’s personal information. Please input
right PIN code to enter.
Note：Consecutive inputting wrong PIN code for several times can
cause locking of UIM Card. To unlock, you need PUK. PIN code and
PUK Code may be offered together with the UIM Card. If not, please
contact with network operator. The default PIN code is 1234, please
change it to your own PIN code as soon as possible.
ZTE
55
7.7.1 Setting PIN Lock
1. Select Menu→ Settings→ Security.
2. Input your PIN Code, press OK key.
3. Select PIN Lock.
4. Select On or Off.
Note： After setting PIN Lock “On” and re-start the phone,
Inputting correct PIN code is the only way of using phone normally.
Otherwise, phone gives emergency call.
7.7.2 Modifying PIN Code
1. Select Menu→ Settings→ Security.
2. Input your phone PIN code, and press OK key.
3. Scroll to PIN Change, input New PIN and press OK Key. “PIN
Changed” appears showing confirmation.
7.7.3 Erasing All Recent Calls
You can erase all Recent Calls.
1. Select Menu→ Settings→ Security.
2. Input your PIN Code, press OK key.
3. Scroll to “Erase All Recent Call List”, press OK key.
4. Select Yes to erase or select No to cancel.
7.7.4 Erasing all Contacts
You can erase all records in Contacts.
ZTE
56
1. Select Menu→ Settings→ Security.
2. Input your PIN Code, press OK key.
3. Scroll to “Erase All Contacts”, press OK key.
4. Select Yes to erase all contacts in phone’s memory or select No
to cancel.
7.7.5 Restoring Factory Default
Your phone offers factory default phone setting. You may modify
some options when you use phone. You can also Restore Factory
Default to renew some modified options to the origin.
1. Select Menu→ Settings→ Security.
2. Input your PIN Code, press OK key.
3. Select Phone Reset.
4. Select Yes to revert to Restore Factory Default or select No to
cancel.
Note： Restoring the phone do not influence your PIN code,
Recent Calls, Contacts, InBox and OutBox.
Some setting, e.g. alarm, cannot be restored.
7.8 Accessories
7.8.1 Setting Headset Ring
When mobile phone connects with earpiece (to buy separately),
you can set alert tone utter from earpiece.
1. Select Menu→ Settings→ Accessories→ Headset Ringing.
ZTE
57
2. Select On or Off to active or deactivate headset alert tone.
7.8.2 Setting Headset Autoanswer
When mobile phone connects with earpiece (buy separately), you
can set earpiece to answer automatically incoming call.
1. Select Menu→ Settings→ Accessories→ Headset
Autoanswer.
2. Select Off to end automatic answering or select 2 seconds, 5
seconds or 10 seconds to give automatic answering seconds later
accordingly.
3. Press OK key.
7.8.3 Any Key Answer
1. Select Menu→ Settings→ Accessories→ Any Key Answer.
2. Select On or Off, press OK key to set or not.
For an incoming call, press any key to answer, except for End key.
ZTE
58
8 Extra
Extra offers two games: BlackJack and Video Poker, as well as
tools, such as, Stopwatch, Alarm, Calendar, Calculator and Voice
Memo.
8.1 Games
8.1.1 BlackJack
After the screen appears greeting, it will indicate play guide.
You can select New Game to start a new game or Continue for
continuing the last game.
Deal：To begin a new game. The display shows your banking
account upside and beting amount downside.
Bet：To bet for game.
8.1.2 Video Poker
After the greeting, phone indicates play guide. You can select New
Game to begin a new game or Continue for continuing the last game.
ZTE
59
Deal：To begin a new game.
Bet： To bet for game.
Payout：Display the payout for each symbol.
8.2 Stopwatch
1. Select Menu→ Extra→ Stopwatch.
2. Select Start to make stopwatch timing.
3. Select Stop to stop timing.
4. Select Reset to clear the time record.
8.3 Alarm
Set alarm alert at a certain time. Alarm alerts only when the
phone is in power on.
1. Select Menu→ Extra→ Alarm.
2. Press Left/Right key to select Enable or Disable to activate or
deactivate alarm.
Select Set to set alarm, and press OK key.
3. Press Left/Right key to move the cursor, and press Up/Down
Key to set Alarm Clock: hour and minute. Press OK key.
4. Select Once, Daily or Weekdays alarm. Press OK key.
5. When alarm rings, select OFF to stop alarming or select
Snooze to postpone alarming time. Alarm rings again 10 minutes
later.
ZTE
60
8.4 Calendar
1. Select Menu→ Extra→ Calendar.
2. Press Left/Right key or Up/Down key to select exact date you
want to view in pop-up calendar window. Press OK key.
3. Scroll Left/Right key to select:
Query: Press OK key to view date info in detail.
Prev Month:
- Press OK key once or several times to view date info in
previous month(s).
- To view other date, press Up key to move cursor back to
Calendar, press Left/Right key or Up/Down key to exact date in
calendar you want. Press OK key and select Query to view new date
info in detail.
Next Month:
- Press OK key once or several times to view date info in next
month(s).
- To view other, press Up key to move cursor back to Calendar,
press Left/Right key or Up/Down key to exact date in calendar you
want. Press OK key and select Query to view new date info in detail.
8.5 Calculator
Use calculator to execute basic math calculation.
1. Select Menu→ Extra→ Calculator.
ZTE
61
2. Key in digits and press Left/Right key to scroll to the symbol
you want, press OK key to execute basic math calculation.
÷ Division Sign
- Subtraction Sign
= Equal Sign
+ Plus Sign
x Multiply Sign
. Decimal Point
C Clear all input digits and reset to Zero
± Change digit to positive number or
negative
Press Clear key to erase digit one by one and exit to previous
window, press End key to exit to standby mode.
Note：This calculator has a limited accuracy and is designed for
simple calculations.
8.6 Voice Memo
ZTEX175 supports Voice Memo function either in or not in
conversation with a capacity of saving 5 pcs records in max. When
there is no space in Voice Memo or Voice Memo is full, the phone
prompts.
8.6.1 Recording in Normal
1. Select Menu→ Extra→ Voice Memo.
ZTE
62
2. Scroll Up/Down key to select:
Record – When you are not in conversation, select Start
to begin a new Recording, or Stop/ Pause recording.
Record List – Play or Delete the record listed and named
by date and time.
Memory Space – Check memory used already out of
record capacity.
Note: The record saved in normal (not in conversation) will be
listed in Settings→ Sound→ Ringer Type as a kind of ringer
tone.You can select it or not as you like as ring of the phone. The
record can not be deleted as if it is activated as the ringer, unless you
cancel the record as the ring of the phone.
8.6.2 Recording in Conversation
When you are in conversation, select Record to pop-up window
of Voice Memo and select Start to begin a new Recording, or Stop,
Pause/Resume recording, without ending the call.
The phone exits back to the calling interface when the recording is
finished. The record will be saved automatically when the call is ended
without finishing recording, and exit back to interface of ending call.
8.6.3 Recording with Incoming Call/Message
With Incoming Call
While recording in state of non-conversation, receive a call
ZTE
63
will stop recording. The record of phone will be saved
automatically and return to call interface.
With Message
While recording in state of non-conversation, receive a
message won’t stop recording. The phone prompts message alert
without display message interface.
With Others
- Alarm: Prompts later.
- Alert: Prompts later.
-Power off automatically while recording: Save record
automatically.
Note: In state of non-conversation, record voice via MIC; In state of
conversation, record voice via earpiece.
ZTE
64
9 Text Input
Your phone offers text input modes: Multitap Input (Abc),
Numbers Input (Num), eZiText Input (eZi), and Symbol Input
(Symbols). Input mode includes capital letter and lowercase mode.
You can key in letters, digits, characters and symbols when writing
text or editing contact record information in Contacts or Messages etc.,
following the common instruction in hereinafter table.
Operation Method
Input Letters Multitap (Abc) Input—“Abc”, press
corresponding letter key till the letter
appears.
Input Words eZiText Input—“eZi”, press any key once
to key in any word.
Input Digits Numbers Input—“Num”, press digit key
once.
Input Symbol Symbols Input — enter the symbols by
pressing corresponding digit key. Or press
“1” key till the symbol (common symbols)
appears except for Numbers Input mode.
Input Space Press # key , except for being in
numbers mode.
ZTE
65
Erase Character Press Clear key .
Erase all the
characters
Hold Clear key till all the characters
to be erased.
Move cursor left or
right Press Left/Right key.
Change input mode Under current mode, press OK key
and Left/Right key to pop-up window of
Text Input and press Up/Down key to
select any text input mode and press Ok
key.
Capitalization Press * key to switch between
capitalization and lowercase, except for
being in Numbers & Symbols mode.
9.1 Multitap Input
Select Multitap Input (Abc) — Each key stands for multiple
letters. Press key till your letter appears. When the cursor moves, enter
the next letter.
9.2 Numbers Input
Select Numbers Input (Num) — Press the corresponding key
once to input the number. In Numbers input mode, you can not enter
space.
ZTE
66
9.3 eZiText Input
Select eZiText Input (eZi) — Predictive word input is based on a
built-in dictionary to which you can also add new word.
One letter asks for pressing only once.
Press the digit key corresponding to the letters once till the word
appears on the screen.
If the word displayed is not the word you want, press Up/Down key
to look for another matching word. Then press OK key to confirm.
9.4 Symbols Input
Select Abc & eZi:
- Press to input till the symbol appears. Most common
punctuation marks and special characters are available.
Or select Symbols:
- Press Up/Down key to page down. And press digit key to enter
corresponding symbol.
ZTE
67
10 Troubleshooting
If your phone appears following phenomenon in the process of
application, please read following relative information at first. If the
problems still can not be solved, please contact with the distributor or
service provider.
Problem Check Point
When switching on the phone, it
prompts “Enter PIN”.
Please input your PIN Code which
offered with UIM Card together. If
you have changed PIN code,
please input new PIN Code. You
can also set PIN code
deactivated, see “7.7 Security
Settings”.
When switching on the phone, it
prompts “Insert card and restart
phone”.
Please check whether valid UIM
card is inserted or not.
No key beep on pressing keys. Please check the setting of Key
Beep in Settings.
When there is an incoming call,
the prompt ringer not rings.
Please check the setting of sound
Alert Type and ringer Volume in
Settings.
ZTE
68
No prompt tone at alarm time. Please check relative sound
setting (Alert Type and ringer
Volume in Settings).
Messages cannot be sent. Please check the signal of
network.

Navigation menu