ZTE ZTEX176 CDMA 1X Digital Mobile Phone User Manual Q78 ZTEX176

ZTE Corporation CDMA 1X Digital Mobile Phone Q78 ZTEX176

User Manual

ZTE X176 CDMA 1X Digital Mobile Phone User Manual
Copyright © 2008 by ZTE Corporation All rights reserved. No part of this publication may be excerpted, reproduced, translated or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE Corporation. The manual is published by ZTE Corporation. We reserve the right to make modifications on print errors or update specifications without prior notice. Version No.: Release 1.0* Edition Time: Aug. 2008 Manual No.: 056584500000
ZTE 3Declaration We, ZTE Corporation, declared that:  The product is installed with battery separately in the box. The FCC ID label is placed on the mobile phone clearly visible to all persons at the time of purchase.  The user is cautioned that changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment.  This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.  Do not attempt to disassemble the mobile phone and battery by yourself. Non-expert handling of the devices may damage them.  Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed limits for exposure to radio frequency (RF) energy set by the Federal Communications  Commission (FCC) of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific
ZTE 4organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age or health. The exposure standard for wireless fixed phoned employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limits set by the FCC are 1.6W/kg. Tests for SAR are conducted using standard operating positions accepted by the FCC with the phone transmitting as its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station, the lower the output power. The Highest SAR Values for this model phone when tested for use on the right head was 1.304 W/Kg, on body was 0.121w/Kg
ZTE iContent 1 General Information....................................................... 2 1.1 Welcome....................................................................................2 1.2 Security.....................................................................................2 1.3 Safety Warnings ..............................................................3 1.4 Limit Warranty..........................................................................7 1.5 Limitation of Liability...............................................................8 1.6 Declaration................................................................................8 2 Know Your Phone............................................................ 9 2.1 Keypad......................................................................................9 2.2 Instruction of Interface Icon....................................................11 2.3 Technical Parameters...............................................................12 2.4 Battery.....................................................................................12 2.4.1 Remove and Installation of Battery .................................13 2.4.2 Charging the Battery........................................................14 2.5 Connect to the Network ..........................................................15 2.5.1 UIM Card ........................................................................15 2.5.2 Insertion and Extraction of UIM Card.............................16 2.5.3 Power on/off Phone .........................................................17 2.5.4 Connect the Network.......................................................17
ZTE ii3 Basic Operations............................................................ 18 3.1 Make a Call.............................................................................18 3.2 Answer a Call..........................................................................19 3.2.1 Headset Ringing ..............................................................20 3.2.2 Headset Autoanwer..........................................................20 3.2.3 Set any Key Answer ........................................................20 3.2.4 Incoming Call Silence .....................................................21 3.3 In Conversation.......................................................................21 3.3.1 Silence in Conversation...................................................21 3.3.2 Adjust Volume in Conversation.......................................21 3.3.3 Select Options in Conversation .......................................21 3.4 Menu Functions ......................................................................22 4 Contacts.......................................................................... 23 4.1 Find Records...........................................................................23 4.2 Add New Record.....................................................................25 4.3 View Records..........................................................................27 4.4 Erase Records..........................................................................27 4.4.1 Erase a Record.................................................................27 4.4.2 Erase all Contacts............................................................28 4.5 Edit Name of the Contacts ......................................................28 4.6 Edit Phone Number.................................................................28 4.7 Select Group............................................................................29 4.8 Set Number Type.....................................................................29
ZTE iii4.9 Set Speed Dial.........................................................................29 4.10 View and Make Speed Dial...................................................30 4.11 Memory Status ......................................................................30 4.12 Copy all Contacts..................................................................31 5 Messages......................................................................... 32 5.1 Send a New Message ..............................................................32 5.2 Send Messages........................................................................33 5.3 Receive Incoming Call while Editing Message.......................34 5.4 Read Message .........................................................................34 5.5 View OutBox...........................................................................35 5.6 Erase Messages.......................................................................35 5.6.1 Erase a Message ..............................................................36 5.6.2 Erase all Messages...........................................................36 5.7 UIM.........................................................................................37 5.8 Send Preformatted Messages ..................................................37 5.9 Read Voice Mail......................................................................38 5.10 Message Settings...................................................................38 5.10.1 Change Voice Mail Box Number...................................38 5.10.2 Message Alert................................................................39 5.10.3 Automatically Erase InBox............................................39 6 Recent Calls ................................................................... 40 6.1 View Recent Calls...................................................................40
ZTE iv6.2 Erase Recent Calls List ...........................................................41 7 Settings........................................................................... 42 7.1 Auto Key Guard......................................................................42 7.2 Supp.Services..........................................................................43 7.2.1 Call Waiting.....................................................................43 7.2.2 Call Forwarding...............................................................44 7.3 Sound......................................................................................45 7.3.1 Volume.............................................................................45 7.3.2 Alert Type........................................................................45 7.3.3 Ringer of Incoming Call..................................................46 7.3.4 Key Beep.........................................................................46 7.3.5 Key Tone Length .............................................................46 7.3.6 SMS Ringer.....................................................................46 7.3.7 ClockRinger Type............................................................47 7.4 Display....................................................................................47 7.4.1 Set Backlighting ..............................................................47 7.4.2 Change Banner................................................................47 7.4.3 Select Language ..............................................................48 7.4.4 Adjust Contrast................................................................48 7.4.5 Set Menu Format.............................................................48 7.4.6 Set Time Format..............................................................48 7.4.7 Screensaver......................................................................49 7.5 Alert ........................................................................................49
ZTE v7.6 Call Timers..............................................................................50 7.7 Security Settings .....................................................................50 7.7.1 Modify PIN Code ............................................................51 7.7.2 Erase All Recent Calls.....................................................51 7.7.3 Erase all Contacts............................................................51 7.7.4 Restore Factory Default...................................................51 7.8 Accessories..............................................................................52 7.8.1 Set Headset Ring .............................................................52 7.8.2 Set Headset Autoanswer..................................................52 7.8.3 Any Key Answer..............................................................53 8 Extra............................................................................... 54 8.1 Games .....................................................................................54 8.1.1 BlackJack ........................................................................54 8.1.2 Video Poker.....................................................................54 8.2 Stopwatch................................................................................55 8.3 Alarm ......................................................................................55 8.4 Calendar..................................................................................56 8.5 Calculator................................................................................56 8.6 Voice Memo............................................................................57 8.6.1 Record in Normal ............................................................57 8.6.2 Record in Conversation ...................................................58 8.6.3 Record with Incoming Call/Message...............................58 9 Text Input....................................................................... 60
ZTE vi9.1 Multitap Input .........................................................................61 9.2 Numbers Input ........................................................................61 9.3 eZiText Input...........................................................................62 9.4 Symbols Input.........................................................................62 10 Troubleshooting............................................................. 63
ZTE 1Explanation for Mobile Phone with/without UIM Card There are two types of ZTE CDMA Mobile phone, one need UIM card inserted and another does not need. Sections or functions in this manual are for the phone with UIM card. If your phone could be used without UIM card, please pay attention to the following items: 1. The phone can be used without the UIM card. 2. Some functions are only available concerning with UIM and won't display, such as, z The new contact can be saved only in Phone, not in UIM. z The new message can be saved only in Phone, not in UIM. z The message in Inbox can not be moved to UIM. z There is no PIN Lock function in Security Setting.
ZTE 21 General Information 1.1 Welcome Thank you for choosing ZTEX176 CDMA 1X Digital Mobile Phone. To guarantee the mobile phone always in its best condition, please read this manual carefully and keep it for future use. The pictures, symbols and contents in this manual are just for your reference. They might not be completely identical with your phone. Please subject to the real object. ZTE operates a policy of continuous development and reserves the right to update and modify the technical specifications in this document at any time without prior notice. 1.2 Security  If your mobile phone is lost or stolen, please report to your service provider or agencies of banning the use of your lost UIM card and phone, which will protect you from economic losses resulted from unauthorized use. You need to provide the phone’s ESN (Electronic Series Number) number labeled. You can see ESN number after removing the battery. Please keep ESN number for future use.  To prevent your mobile phone from illegal use, please take the security measures as follows: ¾ Set PIN code of the UIM card.
ZTE 3¾ Take it with you as you can. 1.3 Safety Warnings To the Owner  Some electronic devices are susceptible to electromagnetic interference sent by mobile phone if inadequately shielded, such as electronic system of vehicles. Please consult the manufacturer on the device before using the phone if necessary.  Operating of mobile phone may interfere with medical devices like hearing aides and pacemakers. Please always keep the mobile phone more than 20 centimeters away from such medical devices when the phone is powered on.  The phone with internal antenna has been tested for compliance with FCC RF Exposure (SAR) limits and is complied with FCC RF exposure compliance requirements.  Do not carry the mobile phone in the breast pocket. Power the mobile phone off if necessary. Consult a physician or the manufacturer on the medical device before using the phone.  Be aware of the usage limitation when using a mobile phone at places such as oil warehouses or chemical factories, where there are explosive gases or explosive products being processed, because even if your phone is in standby mode, it still transmits radio frequency (RF) energy. Therefore, power off your phone if required.
ZTE 4 Pay attention to traffic safety. Do not use your mobile phone while driving. Park before making or answering a call.  Store the phone out of the reach of little children. The phone may cause injury if used as a toy.  The phone complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) The phone may not cause harmful interference, and (2) the phone must accept any interference received, including interference that may cause undesired operation. Mobile Phone  Please use original accessories or accessories that are authorized by the manufacturer. Using any unauthorized accessories may affect your mobile phone’s performance, and violate related national regulations about telecom terminals, or even endanger your body  If you want to clean your phone, please use clean fabric that is a bit wet or anti-static. Do not use harsh chemical cleaning solvents or strong detergents to clean it. Turn off your phone before you clean it.  As your mobile phone can produce electromagnetic field, do not place it near magnetic items such as computer disks.  Using the phone near electrical appliances such as TV, telephone, radio and personal computer can cause interference, which
ZTE 5affects the function of the phone.  Do not expose your mobile phone to direct sunlight or store it in hot areas. High temperatures can shorten the life of electronic devices.  Prevent liquid from leaking into your phone.  Do not drop, knock or harshly treat your phone. Rough handling can break internal circuit boards.  Do not connect the phone with other unauthorized peripheral equipments.  Do not attempt to disassemble the mobile phone and battery by yourself. Non-expert handling of the devices may damage them.  Do not attempt to disassemble the mobile phone and battery by yourself. Changes and modifications made to the phone without the approval of manufacturer could void your authority to operate this phone.  Do not charge the mobile phone without battery.  On occasion of emergent calling, keep your phone in status of power on and in area of service. On the condition of standby, press the key to enter emergency phone number, and then press Send key to make a phone call. Battery Using The battery and the phone are separately deposited in the
ZTE 6package and packed in well condition. Please make use of the battery carefully following the instructions.  Do not short-circuit the battery, as this can cause excessive heat and fire.  Do not store battery in hot areas or dispose of it in a fire to avoid explosion.  Never use any charger or battery damaged or worn out.  Return the wear-out battery to the provider or put it in the appointed recycle place. Do not put it in familial rubbish. Warning: If the battery is broken, keep away from content. If it taints your skin, wash your skin with abundant fresh water and ask doctor for help if necessary. Safety and General Using in Vehicles  Before making or answering a call, you should pay attention to the local laws about using wireless mobile phones and take them into account in practical use.  Safety airbag, brake, speed control system and oil eject system shouldn’t be affected by wireless transmitting. If you do meet problems above, please contact your automobile provider.  Please power off your mobile phone when refueling your automobile, and so do the place where duplex wireless equipments are banned. Don’t put your phone together with flammable or explosive items, as inner spark may cause fire.
ZTE 7In Aircraft  Follow the restrictions in aircraft. Wireless devices can cause interference in aircraft.  Please power off your mobile phone before taking off till landing. In order to protect airplane’s communication system from interference, it is never allowed to use mobile phone when it is in flight. Using mobile phone before the plane taking off should get aircrew’s permission according to safety regulations. 1.4 Limit Warranty The warranty does not apply to defects or errors in the product caused by: (a) Reasonable abrasion. (b) Misuse including mishandling, physical damage, improper installation, unauthorized disassembly of the product. (c) Water or any other liquid damage. (d) Any unauthorized repair or modification. (e) Power surges, lightning damage, fire, flood or other events outside ZTE’s reasonable control. (f) Use of the product with any unauthorized third party products such as generic chargers. (g) Any other cause beyond the range of normal usage for products. End User shall have no right to reject, return, or receive a
ZTE 8refund for any product from ZTE under the above-mentioned situations. This warranty is end user’s sole remedy and ZTE’s sole liability for defective or nonconforming items, and is in lieu of all other warranties, expressed, implied or statutory, including but not limited to the implied warranties of merchantability and fitness for a particular purpose, unless otherwise required under the mandatory provisions of the law. 1.5 Limitation of Liability ZTE shall not be liable for any loss of profits or indirect, special, incidental or consequential damages resulting from or arising out of or in connection with using this product, whether or not ZTE had been advised, knew or should have known the possibility of such damages. 1.6 Declaration We,ZTE Corporation, declared that the product is installed with battery separately in the box.The FCC ID label is placed on the mobile phone clearly visible to all persons at the time of purchase.
ZTE 9 2 Know Your Phone 2.1 Keypad Key Tip Function Description Send key  Make or answer a call.  Press Send key in standby mode to enter All Recent Calls list. Earpiece LCD DisplayOK Key Send Key4-way scroll Key 0~9 Number Key Microphone Charge connector End Key Cancel Key Earphone
ZTE 10 Press Send key two times directly to redial the last number. End key  End an active call or reject a call.  Power on/power off.  Exit from any interface to standby mode. Clear key  Erase character(s) while editing.  Cancel operation, eixt to previous pop-up window.  In standby mode, hold Clear key to lock keypad. OK key  Enter main menu in standby mode, as shown on the screen.  Switch to options of submenu.  Confirm the character chosen while character inputting. Up/Down key (Scroll key)  Scroll the cursor up and down.  Used as selection key up and down for keying in commands and selecting options shown on the display.  In standby mode, hold Up key to set Silence All; Press Down key to enter Messages menu.
ZTE 11 Adjust volume in conversation.  Used as direction key in games. Left/Right key (Scroll key)  Scroll the cursor left and right.  Used as selection key to scroll cursor left and right for keying in commands and selecting options shown on the display.  In standby mode, press Left key to enter Extra menu, press Right key to view All Contacts.  Used as direction key in games. ~ 0~9 Number key  Key in numbers or characters.  Make a speed Dial call. *key，#key  Differs in different mode, option or function menu. Note: To “press” the key in this manual means to press the key and release it. To “hold” the key means to keep pressing the key for two seconds or more. 2.2 Instruction of Interface Icon Icon Indication Signal strength Incoming call or calling
ZTE 12 Keypad locked Roaming New message Vibration Silence All Alarm Power indicator 2.3 Technical Parameters Handset Type ZTEX176 Dimensions (Width×Height×Thickness) 43.4 mm×100mm×13.4mm Weight About 85g(Battery Included) Battery Continuous standby time About 80h～160h (Subject to Network) Continuous talk time About 2h～4h (Subject to Network) Note: Please refer to the real phone for other relative parameters of the battery and charger. 2.4 Battery The attached Li-ion battery along with the phone can be used after unpacking. For the first three times, please use up the power and charge it fully for a new battery to perform well.
ZTE 132.4.1 Remove and Installation of Battery  Remove：(1) Press and push the back-cover of the phone down to release and remove it off the phone. (2) Put finger on the top finger grip, and then lift up the battery from the finger grip to remove the battery.  Installation：(1) Replace the battery into the battery slot, to be noted that the lower end of the battery firstly inserted. (2) Put the back-cover of the phone flatly upon the body of phone. Direct the back cover towards the locking catches on the both sides of the phone and push the back-cover of the phone upward to lock the cover into its place.
ZTE 142.4.2 Charging the Battery  Plug out rubber away (turn 180° as shown in the picture)from the jack on the bottom of the handset and connect the lead from the charger to the socket on the bottom of the phone. (Note: The side with arrow should be upright while connecting).  Connect the charger to a standard AC socket.  Meanwhile, the charging indicator in up-right corner of the display flops cyclically, indicating the charging is going. In power-off mode while charging, the display only shows the charge indicator. If the battery is completely flat in storage or used up, it may take for a while before the charging indicator appears on the display or any calls can be made.  When the charging indicator on the screen stops flopping, the charging is completed. The charging takes usually up to 2～3 hours. In the process of charging, it is a normal phenomenon that the battery, phone and charger get into hot accordingly.  After the completion of charging, disconnect the charger from the phone and AC socket.
ZTE 15Note：  When it is in charge, place the phone on condition of good ventilation and temperature between -5℃～＋45℃. Ensure to use the charger offered by the manufacturer. Using unauthorized charger may cause danger and violate the authorization of the phone and the guarantee article.  When the phone is automatically switched off or indicates the alarm information of power shortage, please charge the battery in time.  The duration time of the standby status or conversation of the phone is based on ideal working environment. In practice, the working time of battery varies with network condition, working environment and application methods. 2.5 Connect to the Network 2.5.1 UIM Card Before using the phone, please insert effective UIM (User Identity Module) card into the phone. All the information related to the network connection is recorded in the metal plane area of UIM card together with the information you stored in your Contacts in the UIM card. The UIM card can be inserted into any CDMA phone to use (new phone automatically reads UIM card). Please do not touch the metal plane area of the card to avoid
ZTE 16missing and damaging information in the card and put UIM card in place far away from electricity and magnetism. Warning：Please power off the phone before taking out UIM card. It is prohibited to insert or take out UIM card in the condition of connecting with external power. 2.5.2 Insertion and Extraction of UIM Card  Power off the phone, remove the battery and other external power.  Insert UIM card into UIM card holder at first, and then insert UIM card holder into UIM card slot in the phone.  Put finger on the finger grip of UIM card holder，pull out UIM card holder out of slot. And then remove UIM card away from UIM card holder, as shown in picture hereinafter.
ZTE 172.5.3 Power on/off Phone Press and hold End key to power on/off the phone.The phone will check whether UIM card inserted well or not. And then follow the prompt indication on the display: Searching——Search appropriate network connected. 2.5.4 Connect the Network After powering on, the phone automatically searches the network available and in state of standby mode. Besides sending and receiving calls, you can also do:  Press OK key to enter main Menu.  Hold Clear key to lock phone’s keypad.  Hold Up key to set the phone in Silence All.  Press Down key to enter Messages menu.  Press Left key to enter Extra menu.  Press Right key to view All Contacts.  Press Send key to enter All Recent Calls.
ZTE 18 3 Basic Operations 3.1 Make a Call Please ensure that you are in the place where the signal can be received. Examine network signal strength icon in the upper left corner of the screen. The more the indication bars, the stronger the intensity of receiving signal is. If there is no bar, please move to the place where the intensity of receiving signal is better. Sometimes, you only need to change the direction.  Make a National Call Press Number key to key in phone number, and add area code when making a long distance call (no need to add area code when dialing local number in some area). Press Send key to call out. Press End key to end the call and conversation.  Make an International Call Enter the country code, area code (without the leading “0”) and
ZTE 19the complete telephone number you want to dial, press Send key to call out. Before the country code, hold a certain number key, e.g. “0” key to enter the international prefix “+” (the “+”character replaces the international access code) or key in international prefix e.g. “00” of international call directly.  Make Recent Calls All calls you recently dialed, received or missed are saved in your phone. All numbers are grouped as Missed Calls, Incoming Calls and Outgoing Calls. When the list is full, the oldest number will be erased automatically when new record is coming. You can check the list as follows:  In standby mode, press Send key to view All Recent Calls.  The number in listed can be directly dialed by pressing Send key. 3.2 Answer a Call When a call is incoming in standby mode, the phone will offer corresponding ringer or vibration to prompt according to your settings. Country code + Area code + Telephone number 0086 755 26770000
ZTE 20With the number already saved in Contacts, the phone also shows the name of caller meanwhile. • Press to answer an incoming call. • Press to end a call and the call duration is temporarily displayed. See “7.8 Accessories” or refer to other ways of answering calls for your option as follows. 3.2.1 Headset Ringing • Select Menu→ Settings→ Accessories→ Headset Ringing. • Select On/Off, and press OK key. 3.2.2 Headset Autoanwer You can set headset to answer an incoming call automaticlly. • Select Menu→ Settings→ Accessories→ Headset Autoanwer • Select Off, 2 seconds, 5 seconds, 10 seconds, and press OK key. 3.2.3 Set any Key Answer • Select Menu→ Settings→ Accessories→ Any Key Answer. • Select On, and press OK key. An incoming call can be answered by pressing any key except End key.
ZTE 213.2.4 Incoming Call Silence • When a call is coming, press OK key to select Silence to mute the ringer tone. • This function silences the current incoming call only. The phone will ring normally as next call coming. 3.3 In Conversation 3.3.1 Silence in Conversation During conversation, you can select Menu or Mute displayed. Select Mute to let the other party temporarily not hear your voice; Select Unmute back to normal. You can also enter Menu in a conversation. 3.3.2 Adjust Volume in Conversation Press Up/Down key to adjust volume of Earpiece during a call. 3.3.3 Select Options in Conversation During a call, press Left/Right key and OK key to select options of SPK.ON/ Normal, Mute/Unmute, Record, Menu for options.  Select SPK.On/ Normal set phone Speaker on/off.  Select Mute/Unmute to let the other party temporarily can or can not hear your voice.  Select Record to make a record of conversation with 5 pieces in Max.
ZTE 22 Select Menu for options in Menu, such as Contacts, with no worry about the ending of conversation. 3.4 Menu Functions  Main Menu Function: i. In standby mode, press OK keyto enter main Menu. ii. Scroll Up/Down or Left/Right key through the menu and select functions according to the prompt on the screen. iii. If the menu contains submenus and further submenus, select options and submenu you want according to the prompt on the screen. iv. Press OK key or Clear key to set or return to the previous menu. Press End key to exit to standby mode.  Bottom Menu Function: If options are displayed on the bottom of the screen, press OK key and then Left/Right key to select. Press OK key or Clear key to set or exit. The functions of phone are mainly grouped in main Menu: Contacts, Messages, Recent Calls, Settings, and Extra. Please refer to the text hereinafter in this manual in detail. Note: The picture used in this manual are with small icons.
ZTE 23 4 Contacts You can save contacts in phone and UIM card. Each contact in phone’s memory has three phone numbers, one e-Mail, one address and one personal web page. Select Memory Status to view memory of handset and UIM card. 4.1 Find Records You can search for a name or number in Contacts in pop-up window by choosing:  In All Contacts 1. Select Menu → Contacts. 2. Select View All. You can key in the first characters of the name you are searching for to view contact directly in All Contacts. 3. Press Up/Down key to scroll through the corresponding name(s) and records in the list. Scroll to the name you want, and press OK key to view the details.
ZTE 24 Find 1. Select Menu → Contacts. 2. Select Find. You can key in total or any part of the the name you are searching for. You can also switch between Find, Text input mode (Abc, etc.), Cancel by pressing OK key and Right /Left key. And then press OK key to find. 3. Press Up/Down key to scroll through the corresponding name(s) and records in the list. Scroll to the name you want, and press OK key to view the details.  In Standby Mode: To quickly find phone number in Contacts in standby mode, press Right key or directly key in total or any part of the phone number and select Find, and /or scroll to the name you want. All the contacts will be list by the letter of the name. If no contact in the list, “No contacts found” will be displayed. Note: You search for the name or number you want to edit. Press Options and select Add New (not for UIM card), Edit Name, Classify Contact (not for UIM card), or Erase Contact, to add new contact, edit the name, number, or text and press OK key.
ZTE 254.2 Add New Record  Save to Phone: 1. Select Menu→ Contacts→ Add New 2. Select would-be added information: Phone, Email, Address, and Web Page. 3. Press OK key twice to select Next, then Enter name of the contact. See “10. Text Input” more instructions for writing text and character. 4. After the completion of writing, select Next. 5. Scroll to the just-added phone number to reedit，press OK key. Further operation can be executed, such as:  Edit：Edit the number.  Erase: Delete the number.  Send SMS Message: Send message to this number.  Number Type: Set number’s type.  Save to UIM: Save in UIM card.  Add to Speed Dial: Assign a speed dial number to the phone number. 6. Scroll to Options and press OK key  Add New: Add new information.  Edit Name：Edit Contact name.  Classify Contact: Group records into Personal or Business.
ZTE 26 Erase Contact：Erase this new contact record. When you Add new Email, Address or Web Page and press OK key, you can：  View Address：View the Email, Address or Web Page in detail.  Edit：Edit the Email, Address or Web Page.  Erase：Erase the Email, Address or Web Page.  Add to UIM Card: 1. Select Menu→ Contacts→ Add to UIM. 2. Key in Phone Numbers, and press OK key twice to select Next, then Enter name of the contact. See “9. Text Input” more instructions for writing text and character. 3. After the completion of writing, select Next. 4. Scroll to the just-added phone number to reedit, press OK key. Further operation can be executed, such as, Edit, Send SMS Message, Save to Phone, Add to Speed Dial. 5. Scroll to Options, and press OK key. - Edit Name： Edit Contact name. - Erase Contact: Erase this new contact. Note: In standby mode, key in phone number, press Left/Right key to select New, To Existing, To UIM, Find, and then press OK key
ZTE 27to add new record or search for record. If you save the same number again, the phone prompts to remind you this number is already exist. 4.3 View Records 1. Select Menu→ Contacts. 2. Select following option, you can view the corresponding records in list. －View All：All records in phone and UIM card. －UIM： All records in UIM Card. －Personal： All records in personal group. －Business： All records in business group. Note: When there is no storage record in Contacts, it will indicate “No contacts found”. 4.4 Erase Records 4.4.1 Erase a Record 1. Select Menu → Contacts. 2. Select View All or Find to search for would-be erased record. 3. Scroll to the record you want to erase and press OK key. 4. Select Options to Erase Contact, and press OK key. “Erase Contact?” indicated on the display. 5. Press OK key to select Yes.
ZTE 284.4.2 Erase all Contacts You can erase all the records in Contacts See “7.7 Security Settings” for the details. 4.5 Edit Name of the Contacts 1. Select Menu→ Contacts. 2. Select View All or Find to search for would-be edited record. 3. Scroll to the record you want to edit and press OK key. 4. Select Options to Edit Name, and press OK key. 5. Press Clear key to erase character of the current name, and rewrite the name. 6. Select Save, “Contact Saved”appears on the display. 4.6 Edit Phone Number 1. Select Menu→ Contacts. 2. Select View All or Find to search for would-be edited record. 3. Scroll to the number you want to edit and press OK key. 4. Select Options to Edit number, and press OK key. 5. Press Clear key and press number key to erase and key in digit of phone number. 6. Press OK key twice and select Save. “Number Saved” appears on the display.
ZTE 294.7 Select Group You can group the stored records into Personal and Business. 1. Select Menu→ Contacts. 2. Select View All or Find to search for would-be edited record in phone’s memory, and press OK key. 3. Select Classify Contact and press OK key. 4. Select Personal or Business and press OK key. “Contact Saved” appears on the display. 4.8 Set Number Type 1. Select Menu→ Contacts. 2. Select View All or Find to search for would-be edited record in phone’s memory and press OK key. 3. Select number, press OK key, and select Number Type. 4. Select the type of number: Work, Home, Mobile, Pager or Other and press OK key. 4.9 Set Speed Dial In standby state, you can make a Speed Dial of stored number by keying in one or two-digit digit (2-99). 1. Select Menu→ Contacts 2. Select View All or Find to search for the record you want to set as speed dial number, press OK key, and then move to number in window, and press OK key.
ZTE 303. Scroll to select Add to Speed Dial and press OK key. 4. Select an Empty slot in list. 5. Press OK key. “Contact added” appears on the display. 4.10 View and Make Speed Dial View： Select Menu→ Contacts→ Speed Dial List, all Speed Dial list indicated. Dial： When you select one phone number in the Speed Dial List, you can press Send Key to dial. You can also make a call by entering speed dial number in the standby mode. Method 1: Enter speed dial number, press Send Key to dial. Method 2: Directly hold the Speed Dial Number digit key. If the Speed Dial Number is one-digit, directly hold the digit key. If the Speed Dial Number is two-digit, press first digit key and then hold the second one. For example: If the Speed Dial Number is 25, you should press 2 key firstly, and then hold 5 key, thus it can dial directly. Note: Some handset may not support method 1. Some handset support only one-digit speed dial number, some support both one-digit and two-digit speed dial number. 4.11 Memory Status 1. Select Menu→ Contacts→ Memory Status.
ZTE 312. View the number of saved entries and maximum number of entries saved in phone and UIM card. For example: phone: 8/200, UIM Card: 4/150, indicating that 200 records entries in Max., out of which eight have be saved in phone. And 150 entries in Max., out of which four have been saved in UIM Card. Please consult with service supplier for storage capacity of UIM card. 4.12 Copy all Contacts 1. Select Menu→ Contacts→ Copy All. 2. Copy all contacts as follows:  Phone To UIM: Copy all contacts of the phone’s memory to UIM card Note: This function can copy all the contract records to UIM card, and all the different records or numbers under the same name will be copied accordingly to UIM card one by one as different records.  UIM To Phone: Copy all contacts in UIM card to the phone’ memory. Note: This function can copy all the contract records to the phone’s memory, and all the different records with same name will be copied accordingly to the phone’s memory.
ZTE 325 Messages This is introduction of how to send, receive and erase the messages in your phone. Note：The function introduced hereinafter may differ with different service offered in your area. Please consult with your service provider for more detailed information. 5.1 Send a New Message Please consult with the service provider to support the network service of sending message. You can only send message to the mobile phone which can receive message. 1. Select Menu→ Messages→ Create Message. 2. Input the recipients’ Phone Number - Or - Select phone number from Contacts (in pop-up window of number input, press OK key, and Left/ Right key to scroll to Contacts), Numbers, and then press OK key to select the phone number you want to send message to and press OK key. 3. Select Continue to Write message text. See “10. Text Input”
ZTE 33more instructions for writing text and character. 4. When you finish writing message, press OK key to select message Priority: Interactive, Normal, Urgent, Emergency. The default priority is Normal. 5. Select Continue and - Send, and press OK key to send message. - Save, and press OK key to save message in OutBox. - Send to multireceiver, and press OK key to send messages to all the receivers. Scroll to Add receiver, inputting recipients see “5.2 Sending Messages” for details. Note: The SMS centers of some cities and regions do not support messages longer than 160 characters. 5.2 Send Messages You can send messages to grouped mobile phone which can receive message meanwhile. 1. Select Menu→ Message→ Send To Multi. 2. Select Add Receiver, press OK key and key in Phone Number - Or - Select phone number from Contacts (in pop-up window of number input, press OK key, and Left/ Right key to scroll to Contacts), press OK key and select all the phone numbers you want to send message to, and press OK key. 3. All the phone numbers displayed in List OK in pop-up window
ZTE 34can be reedited. The maximum of receivers not exceed 10 persons. 4. When you finish editing and writing, select Continue, and press OK key to Send to all the recipients. 5.3 Receive Incoming Call while Editing Message • If you do not want to receive the incoming call, press End key. • If you want to receive the incoming call, press Send key. The message you are editing will be saved to OutBox. After finishing receiving call, you can find the message in OutBox and continue to edit and send it. 5.4 Read Message On receipt of a new message, the phone prompts you by vibration or ringer (up to silence and ringer in Settings). The display indicates “MESSAGE!” and press OK key to view. New message is automatically saved in phone. A character on display indicates the memory for message is reaching full. Erase old messages to keep space for new messages. 1.Select Menu→ Messages→ InBox (select UIM Card to view the message saved in UIM Card). 2. Scroll to the message you want to read. 3. Press OK key to read message. Display automatically scrolls page by page. You can also press Up/Down key to scroll. 4. After reading, press Left/Right key to select:
ZTE 35－Next： View the next message. －Erase：Erase this message. －Forward： Forward the message to other recipients. －Reply： Reply message to sender. －Sender：Call back or reply message to sender or save sender’s number. Select Call to call back, select Reply to reply message to sender, select New to save sender’s number to contacts, select To Existing to save the sender’s number to existed records in the contacts. Select To UIM save message in UIM Card. －Move to UIM：Move message to UIM Card. 5.5 View OutBox 1. Select Menu→ Message→ OutBox. 2. Scroll Message List. 3. Press OK key to read message. 4. Select OK to return to the list. Select other options to Erase, Send, Forward and Edit the message. 5.6 Erase Messages Delete and erase old messages to release space for phone’s SMS memory. You can select erasing messages when sending or reading messages; erase messages one by one or all in InBox, OutBox and UIM Card.
ZTE 365.6.1 Erase a Message 1. Select Menu→ Messages. 2. Select messages location: InBox, OutBox or UIM. 3. Press Up/down key to select to-be-erased messages. 4. Select Erase to erase messages. “Erase this message?” appears. 5. Select Yes to erase this message. 5.6.2 Erase all Messages 1. Select Menu→ Messages→ Erase Messages. 2. Select an option in list: - No：Return to previous pop-up window. - Entire InBox： Erase all messages in InBox. If deletion is selected, the prompt of “Entire InBox?” appears. Select Yes to erase. Select No to return to previous pop-up window. - Entire OutBox： Erase all messages in OutBox. If deletion is selected, the prompt of “Entire OutBox?” appears. Select Yes to erase. Select No to return to previous pop-up window. - Entire UIM： Erase all messages stored in UIM Card. If Delete is selected, the prompt of “Entire UIM?” appears. Select Yes to erase. Select No to return to previous pop-up window. - Old InBox： Erase all the read messages in Inbox. If deletion is selected, the prompt of “Erase all old Inbox messages?”
ZTE 37appears. Select Yes to erase. Select No to return to previous pop-up window. 5.7 UIM The phone can move messages received to UIM card, see “5.4 Reading Message”. Viewing message in UIM card: 1. Select Menu→ Messages→ UIM. 2. Scroll to the message you want to read. 3. Press OK key to read message. Display automatically scrolls page by page. You can also press Up/Down key to scroll. 4. After reading, press Left, Right key to select: －OK： Exit to the previous message list. －Erase：Erase this message. －Sender：Call back or reply message to sender or save sender’s number. Select Call to call back, select Reply to reply message to sender, select New to save sender’s number to Contacts, select To Existing to save the sender’s number to existed records in the Contacts. Select To UIM save message in UIM Card. －Move to Inbox：Move message to InBox. －Forward： Forward the message to other recipients. 5.8 Send Preformatted Messages The phone has a group of some common built-in phrases and sentences, such as, “Call me”, “Can I call you?” etc.
ZTE 381. Select Menu→ Messages→Preformatted Msg. 2. Scroll to the message you want to send. 3. Press OK key to key in phone number or select in Contacts. 4. Press Ok key to edit, save and send message, see “5.1 Sending a new message” in detail. 5.9 Read Voice Mail Before using Voice Mailbox, please consult with network provider to confirm that the function of voice mail box has been activated. After your successful setting, network will automatically transfer divert incoming call(s) to your voice mail box, and send message(s) to your phone. Select Voice Mail to read the message and then dial voice mail box number to listen to the leaving message following guide prompt. To read your voice mail, press for seconds to dial voice mail box number in standby mode. Note: The function needs network support. 5.10 Message Settings You can set your message box before you use it. 5.10.1 Change Voice Mail Box Number 1. Select Menu→ Messages→ Messages Settings→ Voice Mail Number. 2. If the voice mail box has not been set, press OK key to select
ZTE 39Yes, and then add directly. 3. If the number has been set, select Edit to edit and press OK key. 4. After inputting voice mail number, press OK key twice to confirm. Note：Please consult with your network operator for the number of voice mail box. 5.10.2 Message Alert You can select the alert type to prompt on receipt of new message. 1. Select Menu→ Messages→ Message Settings→ Message Alert. 2. Select an option in list: - Alert Once：Phone rings once. - Alert & Remind：Phone dings once every one minute. 3. Press OK key. Note：To select option in Settings as Off or Vibration, it follows the setting of silence option of Settings. 5.10.3 Automatically Erase InBox Set erasing the last read message in Inbox automatically when Inbox is full. 1. Select Menu→ Message→Message Settings→ Auto Erase InBox. 2. Select Enable or Disable and press OK key.
ZTE 40 6 Recent Calls 6.1 View Recent Calls Information of Missed Calls, Incoming Calls, Outgoing Calls, All Recent Calls including name, phone number, and call time and conversation duration is saved in the Recent Calls. 1. Select Menu→ Recent Calls. 2. Select Missed Calls, Incoming Calls, Outgoing Calls or All Recent Calls. 3. Press OK key. 4. Select one entry of the records and press OK key. 5. Select option: - Call Information ：Indicate number, time and conversation duration. - Delete Entry：Erase the number from the list of Recent Calls. - Send SMS Message：Send message to this number. - Save New：Save the number in mobile phone’s Contacts.
ZTE 41- Save To Existing：Add this number to the existed record in the Contacts. - Save to UIM： Save this number in UIM Card. If the UIM Card does not support the function of Incoming Call Indication, you can only see part of the above-mentioned options. 6.2 Erase Recent Calls List You can erase all the Recent Calls in the menu of Recent Calls. 1. Select Menu→ Setting→ Security. 2. Input PIN Code and press OK key. 3. Select Erase All Recent Call List?. The screen indicates “Erase All Recent Call List?” 4. Select Yes to erase all. - Or - 1. Select Menu→ Recent Calls. 2. Select Missed Calls, Incoming Calls, Outgoing Calls or All Recent Calls. 3. Press OK key. 4. Select one entry of the records and press OK key. 5. Select option: - Delete Recent Calls：Select “Yes” to delete all the numbers from the list of Missed Calls, Incoming Calls, Outgoing Calls or All Recent Calls.
ZTE 42 7 Settings In main Menu pop-up window, select Settings to enter into. Your phone has different functions in Settings to meet your requirement. They are: Auto Key Guard, Supp. Services, Sound, Display, Alert, Call Timers, Security and Accessories. 7.1 Auto Key Guard 1. Select Menu→ Settings→ Auto Key Guard to set phones’ key lock and time. 2. Select an option in pop-up window: －Off：Deactivate the function of phones’ key lock. －30 seconds：Phones’ key locked automatically 30 seconds after the last key pressing. －2 minutes：Phones’ key locked automatically 2 minutes after the last key pressing. －5 minutes：Phones’ key locked automatically 5 minutes after the last key pressing. 3. Press OK key to confirm.
ZTE 43 Note： - Hold Clear key to lock the keypad directly in standby mode. - In state of key lock, to make use of phone, unlocking code should be input prompted by phone on the display. 7.2 Supp.Services When network supports Supp. Services, you can use network services of call waiting and call forwarding. Note：All these functions are network services. Please consult with network service provider to get corresponding service application. 7.2.1 Call Waiting During a call, use Call Waiting to answer the waiting call, or dial another call meanwhile putting the first call on hold. These calls can be shifted while you have calls in conversation. Call Waiting lets you enjoy three-party conversation without missing call. 1. Select Menu→ Settings→ Supp.Services→ Call Waiting. 2. Select Activate to activate the Call Waiting function. The network will notify you of an incoming call while you have a call in progress. You can press Send key to get through the waiting call and switch one call to another. 3. Select Deactivate to cancel the Call Waiting function. 4. Select Cancel to exit to the previous pop-up window.
ZTE 447.2.2 Call Forwarding Use Call Forwarding to forward the incoming call to a designated phone number. After setting of call forwarding, phone will automatically dial network to set the function in active. 1. Select Menu→ Settings→ Supp.Services→ Call Forwarding. 2. Set types of Call Forwarding, press OK key. －ALL(Divert unconditionally): All is diverted in all conditions. －Busy(Divert when busy): When the phone is busy, divert. －No Answer(Divert when no answer): When there is no answer, divert. －Default(Busy/NA): When the phone is busy or there is no answer, divert. The service provider offers. －Cancel All：Cancel All Call Forwarding. －Number：Input the destination number to which the call will be transferred. 3. Select Activate to:  Enter Number and press OK key. Input the number to which the phone will forward. E.g. To forward incoming call to 12345678, input: 12345678, press OK key twice and confirm.  Continue to press OK key to Activate. If the number has been set, directly press OK key to select Activate. 4. Select Deactivate to disable Call Waiting function. 5. Select Cancel to exit to previous pop-up window.
ZTE 457.3 Sound 7.3.1 Volume You can adjust the volume of Ringer, earpiece and key beep. 1. Select Menu→ Settings→ Sound→ Volume. 2.Select Ringer (When earpiece is inserted, it is earpiece Ringer), Earpiece or Key Beep. 3. Press Up/ Down key or Left/ Right key to adjust volume. Press OK key. 7.3.2 Alert Type You can select alert type for an incoming call, earpiece and message. 1. Select Menu→ Setting→ Sound→ Alert type. 2. Select an option in list： －Off： Set mobile phone in silence case with backlighting to prompt. －Ringer： Set Mobile phone in Ringer case to prompt. －Vibration： Set mobile phone in vibration case to prompt. －Vibra + Ringer：Set mobile phone in ten-second vibration case, then continuous Ringer later to prompt incoming call. Note: Type of “Vibra + Ringer” for message is as same as type of “Vibration”.
ZTE 467.3.3 Ringer of Incoming Call ZTEX176 offers various Ringers of incoming call for your selection. 1. Select Menu→ Settings→ Sound→ Ringer Type. 2. Press Up/Down key to scroll to your selection, press OK key. 7.3.4 Key Beep Set phone beep sound or not when you press keys. 1. Select Menu→ Settings→ Sound→ Key Beep. 2. Select an option: －Tones： Utter sound when press keys. －Off： Not utter sound when press keys. 7.3.5 Key Tone Length Set phone utter sound long or not when press keys. 1. Select Menu→ Setting→ Sound→ Key Tone Length. 2. Select an Option： －Normal： Utter a fixed- length DTMF tone in short. －Long：Utter DTMF tone even longer. 7.3.6 SMS Ringer You have a choice of various ringing tones for message in phone. 1. Select Menu→ Settings→ Sound→ SMSRinger Type. 2. Press Up/Down key to scroll to select and press OK key.
ZTE 477.3.7 ClockRinger Type You have a choice of various ringing tones for alarm in phone. 1. Select Menu → Settings→ Sound→ ClockRinger Type. 2. Press Up/Down key to scroll to select and press OK key. 7.4 Display 7.4.1 Set Backlighting During a call or pressing keys, the display lights on. You can set lighting duration and type. 1. Select Menu→ Settings→ Display →Backlighting. 2. Select an option in pop-up window: －Off：Turn off backlighting. －10s：Keep backlighting for 10 seconds after last pressing. －30s：Keep backlighting for 30 seconds after last pressing. －10s and in call: Keep backlighting for 10 seconds after last pressing and during a call. －30s and in call: Keep backlighting for 30 seconds after last pressing and during a call. 3. Press OK key to confirm. Note：In conversation, backlighting consumes the power quickly and shortens continues conversation and standby time. 7.4.2 Change Banner View and edit phone’s greeting to which appears on the display to
ZTE 48your own. 1. Select Menu→ Settings→ Display→ Banner. 2. Press OK key to Edit. 3. Key in character(s) and press Clear key to erase character(s). 4. Press OK key twice to Save. 7.4.3 Select Language 1. Select Menu→ Settings→ Display→Language. 2. Select English which is available, and press OK key. 7.4.4 Adjust Contrast 1. Select Menu→ Display→ Contrast. 2. Press Up/Down key or Left/Right key to adjust contrast, and press OK key. 7.4.5 Set Menu Format 1. Select Menu→ Settings→ Display→ Menu Format. 2. Set Menu Format as Large Incons or Small Incons, and press OK key. 7.4.6 Set Time Format 1. Select Menu→ Settings→ Display→ Time Format. 2. Select AM/PM or 24 HR, and press OK key.
ZTE 497.4.7 Screensaver Select Menu→ Settings→ Display → Screensaver. You can set screensaver duration and type. 1. Select Type, press OK key. And then select None to deactivate screen save or select type as Digital Clock. 2. Select Timeout, press OK key. Select an option in pop-up window: －30 seconds： Automatically activate screen save 30 seconds after last key pressing. －2 minutes：Automatically activate screen save 2 minutes after last key pressing. －5 minutes：Automatically activate screen save 5 minutes after last key pressing. 3. Press OK key to confirm. 7.5 Alert You can select Enable or Disable to set the alert. 1. Select Menu→ Settings→ Alert. 2. Select an option on display and press OK key. －Missed Call： When there are missed calls, alert. －Roaming： When roam in active and handoff between service areas or states occurs, alert. －Minute Alert：During a call, ten seconds ahead of every minute, alert.
ZTE 50For the function mentioned above, select Enable to operate; select Disable to cancel alert. 7.6 Call Timers Your phone can record call time of dialing and answering call. 1. Select Menu→ Settings→ Call Timers. 2. Select an option on display and press OK key. －Outgoing Calls：Indicate call time of all dialed call. The timer can be reset. －Incoming Calls：Indicate call time of all answered call. The timer can be reset. －All Calls：Indicate call time of all dialed and answered call. The timer can not be reset. 3. Select Reset to clear data, the timer is set to zero. 7.7 Security Settings Introduction to phone’s security options preventing others to avoid illegal use or acquire your phone’s personal information. Please input right PIN code to enter. Note： Please input right phone PIN code to enter security setting. Consecutive inputting wrong PIN code for several times can cause restarting the phone. The default PIN code is 1234, please change it to your own PIN code as soon as possible.
ZTE 517.7.1 Modify PIN Code 1. Select Menu→ Settings→ Security. 2. Input your phone PIN code, and press OK key. 3. Scroll to PIN Change, input New PIN and press OK Key. “PIN Changed” appears showing confirmation. 7.7.2 Erase All Recent Calls You can erase all Recent Calls. 1. Select Menu→ Settings→ Security. 2. Input your PIN Code, press OK key. 3. Scroll to “Erase All Recent Call List”, press OK key. 4. Select Yes to erase or select No to cancel. 7.7.3 Erase all Contacts You can erase all records in Contacts. 1. Select Menu→ Settings→ Security. 2. Input your PIN Code, press OK key. 3. Scroll to “Erase All Contacts”, press OK key. 4. Select Yes to erase all contacts in phone’s memory or select No to cancel. 7.7.4 Restore Factory Default Your phone offers factory default phone setting. You may modify some options when you use phone. You can also Restore Factory
ZTE 52Default to renew some modified options to the origin. 1. Select Menu→ Settings→ Security. 2. Input your PIN Code, press OK key. 3. Select Phone Reset. 4. Select Yes to revert to Restore Factory Default or select No to cancel. Note： Restoring the phone do not influence your PIN code, Recent Calls, Contacts, InBox and OutBox. Some setting, e.g. alarm, cannot be restored. 7.8 Accessories 7.8.1 Set Headset Ring When mobile phone connects with earpiece (to buy separately), you can set alert tone utter from earpiece. 1. Select Menu→ Settings→ Accessories→ Headset Ringing. 2. Select On or Off to active or deactivate headset alert tone. 7.8.2 Set Headset Autoanswer When mobile phone connects with earpiece (buy separately), you can set earpiece to answer automatically incoming call. 1. Select Menu→ Settings→ Accessories→ Headset Autoanswer. 2. Select Off to end automatic answering or select 2 seconds, 5 seconds or 10 seconds to give automatic answering seconds later
ZTE 53accordingly. 3. Press OK key. 7.8.3 Any Key Answer 1. Select Menu→ Settings→ Accessories→ Any Key Answer. 2. Select On or Off, press OK key to set or not. For an incoming call, press any key to answer, except for End key.
ZTE 54 8 Extra Extra offers two games: BlackJack and Video Poker, as well as tools, such as, Stopwatch, Alarm, Calendar, Calculator and Voice Memo. 8.1 Games 8.1.1 BlackJack After the screen appears greeting, it will indicate play guide. You can select New Game to start a new game or Continue for continuing the last game. ¾ Deal：To begin a new game. The display shows your banking account upside and beting amount downside. ¾ Bet：To bet for game. 8.1.2 Video Poker After the greeting, phone indicates play guide. You can select New Game to begin a new game or Continue for continuing the last game.
ZTE 55¾ Deal：To begin a new game. ¾ Bet： To bet for game. ¾ Payout：Display the payout for each symbol. 8.2 Stopwatch 1. Select Menu→ Extra→ Stopwatch. 2. Select Start to make stopwatch timing. 3. Select Stop to stop timing. 4. Select Reset to clear the time record. 8.3 Alarm Set alarm alert at a certain time. Alarm alerts only when the phone is in power on. 1. Select Menu→ Extra→ Alarm. 2. Press Left/Right key to select Enable or Disable to activate or deactivate alarm. Select Set to set alarm, and press OK key. 3. Press Left/Right key to move the cursor, and press Up/Down Key to set Alarm Clock: hour and minute. Press OK key. 4. Select Once, Daily or Weekdays alarm. Press OK key. 5. When alarm rings, select OFF to stop alarming or select Snooze to postpone alarming time. Alarm rings again 10 minutes later.
ZTE 568.4 Calendar 1. Select Menu→ Extra→ Calendar. 2. Press Left/Right key or Up/Down key to select exact date you want to view in pop-up calendar window. Press OK key. 3. Scroll Left/Right key to select: Query: Press OK key to view date info in detail. Prev Month: - Press OK key once or several times to view date info in previous month(s). - To view other date, press Up key to move cursor back to Calendar, press Left/Right key or Up/Down key to exact date in calendar you want. Press OK key and select Query to view new date info in detail. Next Month: - Press OK key once or several times to view date info in next month(s). - To view other, press Up key to move cursor back to Calendar, press Left/Right key or Up/Down key to exact date in calendar you want. Press OK key and select Query to view new date info in detail. 8.5 Calculator Use calculator to execute basic math calculation. 1. Select Menu→ Extra→ Calculator.
ZTE 572. Key in digits and press Left/Right key to scroll to the symbol you want, press OK key to execute basic math calculation. ÷ Division Sign - Subtraction Sign = Equal Sign + Plus Sign x Multiply Sign . Decimal Point C Clear all input digits and reset to Zero ± Change digit to positive number or negative Press Clear key to erase digit one by one and exit to previous window, press End key to exit to standby mode. Note：This calculator has a limited accuracy and is designed for simple calculations. 8.6 Voice Memo ZTEX176 supports Voice Memo function either in or not in conversation with a capacity of saving 5 pcs records in max. When there is no space in Voice Memo or Voice Memo is full, the phone prompts. 8.6.1 Record in Normal 1. Select Menu→ Extra→ Voice Memo.
ZTE 582. Scroll Up/Down key to select:  Record – When you are not in conversation, select Start to begin a new Recording, or Stop/ Pause recording.  Record List – Play or Delete the record listed and named by date and time.  Memory Space – Check memory used already out of record capacity. Note: The record saved in normal (not in conversation) will be listed in Settings→ Sound→ Ringer Type as a kind of ringer tone.You can select it or not as you like as ring of the phone. The record can not be deleted as if it is activated as the ringer, unless you cancel the record as the ring of the phone. 8.6.2 Record in Conversation When you are in conversation, select Record to pop-up window of Voice Memo and select Start to begin a new Recording, or Stop, Pause/Resume recording, without ending the call. The phone exits back to the calling interface when the recording is finished. The record will be saved automatically when the call is ended without finishing recording, and exit back to interface of ending call. 8.6.3 Record with Incoming Call/Message  With Incoming Call While recording in state of non-conversation, receive a call
ZTE 59will stop recording. The record of phone will be saved automatically and return to call interface.  With Message While recording in state of non-conversation, receive a message won’t stop recording. The phone prompts message alert without display message interface.  With Others - Alarm: Prompts later. - Alert: Prompts later. -Power off automatically while recording: Save record automatically. Note: In state of non-conversation, record voice via MIC; In state of conversation, record voice via earpiece.
ZTE 609 Text Input Your phone offers text input modes: Multitap Input (Abc), Numbers Input (Num), eZiText Input (eZi), and Symbol Input (Symbols). Input mode includes capital letter and lowercase mode. You can key in letters, digits, characters and symbols when writing text or editing contact record information in Contacts or Messages etc., following the common instruction in hereinafter table. Operation Method Input Letters Multitap (Abc) Input—“Abc”, press corresponding letter key till the letter appears. Input Words eZiText Input—“eZi”, press any key once to key in any word. Input Digits Numbers Input—“Num”, press digit key once. Input Symbol Symbols Input — enter the symbols by pressing corresponding digit key. Or press “1” key till the symbol (common symbols) appears except for Numbers Input mode. Input Space Press # key , except for being in numbers mode.
ZTE 61Erase Character Press Clear key . Erase all the characters Hold Clear key till all the characters to be erased. Move cursor left or right Press Left/Right key. Change input mode Under current mode, press OK key and Left/Right key to pop-up window of Text Input and press Up/Down key to select any text input mode and press Ok key. Capitalization Press * key to switch between capitalization and lowercase, except for being in Numbers & Symbols mode. 9.1 Multitap Input Select Multitap Input (Abc) — Each key stands for multiple letters. Press key till your letter appears. When the cursor moves, enter the next letter. 9.2 Numbers Input Select Numbers Input (Num) — Press the corresponding key
ZTE 62once to input the number. In Numbers input mode, you can not enter space. 9.3 eZiText Input Select eZiText Input (eZi) — Predictive word input is based on a built-in dictionary to which you can also add new word. One letter asks for pressing only once. Press the digit key corresponding to the letters once till the word appears on the screen. If the word displayed is not the word you want, press Up/Down key to look for another matching word. Then press OK key to confirm. 9.4 Symbols Input Select Abc & eZi: - Press “1” key to input till the symbol appears. Most common punctuation marks and special characters are available. Or select Symbols: - Press Up/Down key to page down. And press digit key to enter corresponding symbol. Note: Press could enter Symbols directly in Abc/ABC & eZi input mode.
ZTE 63 10 Troubleshooting If your phone appears following phenomenon in the process of application, please read following relative information at first. If the problems still can not be solved, please contact with the distributor or service provider. Problem Check Point When switching on the phone, it prompts “Enter PIN”. Please input your PIN Code which offered with UIM Card together. If you have changed PIN code, please input new PIN Code. You can also set PIN code deactivated, see “7.7 Security Settings”. When switching on the phone, it prompts “Insert card and restart phone”. Please check whether valid UIM card is inserted or not. No key beep on pressing keys. Please check the setting of Key Beep in Settings. When there is an incoming call, the prompt ringer not rings. Please check the setting of sound Alert Type and ringer Volume in Settings.
ZTE 64No prompt tone at alarm time. Please check relative sound setting (Alert Type and ringer Volume in Settings). Messages cannot be sent. Please check the signal of network.

Navigation menu