ZTE ZXHNF670E GPON ONT User Manual

ZTE Corporation GPON ONT Users Manual

Users Manual

1.Dimension after folding(折叠后尺寸):97*139mm.                                     2.Print colour(印刷颜色):black printing(黑色印刷). 3.Material(材质):70g writing paper (70g书纸). 4.Coating(表面处理):无.5.Binding process(装订工艺):Paper folding(折页)——对折再包心折.                                6.Output lpi(输出网线):200 lpi.7.Tolerance(公差):L(长)*W(宽):±1mm.8.Raw materials and the corresponding post processing should meet requirements defined    in the T&W Environmental Protection Technical Standards.   (原材料及后处理工艺均能满足我司《环保技术标准》要求).17'06,07柯琳春罗 荣用户手册效果图正面反面1/1N/AV01ZTEZXHN F670E(V1.0)外置天线 61000000xxxxZXHN F670E2017-06-07(R1.0)ZXHN F670EF670EF670EF670EF670EF670EF670EF670EF670EF670EF670EF670EF670EF670EFCC StatementThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limitsare designed to provide reasonable protection against harmful interferen-ce in a residential installation. This equipment generates, uses and canradiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communi-cations. However, there is no guarantee that interference will not occur ina particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interfe-rence by one or more of the following measures: -Reorient or relocate the receiving antenna.-Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure StatementThis equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be colocated or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:  (1) this device may not cause harmful interference, and(2) this device must accept any interference received, including interferencethat may cause undesired operation.Caution!  Any changes or modifications not expressly approved by the party responsiblefor compliance could void the user's authority to operate the equipment.When this device operates in 5150-5250 MHz band, it should for indoor use only.

Navigation menu