ZTE ZXHNF680 GPON ONT User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2922100
Application ID	znq2Kn2JrAT8cFxjaO2viQ==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	67.94kB (849252 bits)
Date Submitted	2016-03-08 00:00:00
Date Available	2016-03-14 00:00:00
Creation Date	2005-04-15 15:28:02
Producing Software	PDFlib+PDI 7.0.4 (Win32)
Document Lastmod	2015-11-02 15:44:44
Document Title	Users Manual
Document Creator	Arbortext 5.4

ZXHN F680
GPON ONT
User Manual
Manual No: SJ-20141223134319-006
Edition Time: 2015-10-25(R1.0)
LEGAL INFORMATION
Copyright © 2015 ZTE CORPORATION.
The contents of this document are protected by copyright laws and international treaties. Any reproduction or distribution of this document or
any portion of this document, in any form by any means, without the prior
written consent of ZTE CORPORATION is prohibited. Additionally, the
contents of this document are protected by contractual confidentiality obligations.
All company, brand and product names are trade or service marks, or
registered trade or service marks, of ZTE CORPORATION or of their respective owners.
This document is provided “as is”, and all express, implied, or statutory
warranties, representations or conditions are disclaimed, including without
limitation any implied warranty of merchantability, fitness for a particular
purpose, title or non-infringement. ZTE CORPORATION and its licensors
shall not be liable for damages resulting from the use of or reliance on the
information contained herein.
ZTE CORPORATION or its licensors may have current or pending intellectual property rights or applications covering the subject matter of this
document. Except as expressly provided in any written license between
ZTE CORPORATION and its licensee, the user of this document shall not
acquire any license to the subject matter herein.
ZTE CORPORATION reserves the right to upgrade or make technical
change to this product without further notice.
Users may visit ZTE technical support website http://support.zte.com.cn
to inquire related information.
The ultimate right to interpret this product resides in ZTE CORPORATION.
1
Safety Precautions
Usage Cautions
� Read all the safety cautions carefully before using the device.
� Only use the accessories included in the package, such as power supply
adapter.
� Do not extend the power cord, otherwise the device will not work.
� The power supply voltage must meet the requirements of the device input
voltage (The voltage fluctuation range is less than 10%).
� Keep the power plug clean and dry to prevent any risk of electric shock or
other dangers.
� Disconnect all the cables during a lightning storm to prevent the device from
damage.
� Power off and unplug the power plug when the device is not in use for a long
time.
� Do not attempt to open the covers of the device. It is dangerous to do so
when the device is powered ON.
� Do not directly stare at the optical interface to prevent any eye injuries.
� Power off and stop using the device under the conditions such as, abnormal
sound, smoke, and strange smell. Contact the service provider for maintenance if the device is faulty.
Note:
The users should read the usage cautions above carefully and will be responsible for any incident resulting from the violation of the above cautions.
Environment Requirements
� Ensure proper ventilation to the device. Place the device away from direct
sunlight and never spill any liquid on the device.
� Do not place any object on the device to prevent any deformation or damage
to the device.
� Do not place the device near any source of heat or water.
� Keep the device away from any household appliances with strong magnetic
or electric fields, such as microwave oven and refrigerator.
Cleaning Requirements
� Before cleaning, power off the device, and unplug all the cables connected
to the device, such as power cable, optical fiber, and Ethernet cable.
� Do not use any liquid or spray to clean the device. Use a soft dry cloth.
Environment Protection
� Do not dispose the device or battery improperly.
� Observe the local regulations about the equipment disposal or treatment.
2
Package Content
Please make sure the ZXHN F680 package contains the items, refer to Table
2-1.
Table 2-1 Package Contents
Item
Name
Quantity
ZXHN F680 unit
One
AC-DC power supply
adapter
One
RJ-45 Ethernet cable
One
Note:
A socket outlet that is installed near equipment and that shall be easily accessible.
One ZXHN F680 GPON ONT User Manual is delivered with the product.
If any of the items included in the package is incorrect, lost or damaged, please
contact your service provider. If you need to replace the product, please keep
the package and all the items in good condition.
Indicator
Figure 3-1 shows the indicators on the front panel of the ZXHN F680.
Figure 3-1 Indicators of the ZXHN F680
Table 3-1 describes the indicators on the front panel of the ZXHN F680 .
Table 3-1 Indicators on the Front Panel
Indicator
Status
Description
Off
The device is powered off.
Power
PON
LOS
Solid green
The device is powered on.
Off
The ONT registration fails or the system is not
powered on.
Solid green
The ONT registration is successful.
Flashing green
The ONT is being registered.
Off
The ONT received optical power is normal.
Solid red
Flashing red
Off
Internet
Solid green
Flashing green
Off
Phone1 、
Phone2
Solid green
Flashing green
The optical transmitter of the PON interface is
powered off.
The received optical power is less than the
optical receiver sensitivity, or the device is
downloading a program package.
The device is not powered on, there is no WAN
connection with Internet properties configured,
or the WAN configuration is not effective.
There is a WAN connection with Internet
properties configured and the WAN
configuration is effective.
Data is being transmitted.
The device is not powered on or the voice
service cannot be registered on the softswitch.
The voice service is successfully registered on
the softswitch, but there is no service traffic.
There is voice service traffic.
Indicator
Status
Off
LAN1–LAN4
2.4GHz
5GHz
WPS
Solid green
Flashing green
Data is being transmitted or received.
Off
The device is not powered on or the wireless
interface is disabled.
Solid green
The wireless interface is enabled.
Flashing green
Data is being transmitted.
Off
The device is not powered on or the wireless
interface is disabled.
Solid green
The wireless interface is enabled.
Flashing green
Data is being transmitted.
Yellow
Negotiation is in progress.
Green
Negotiation is successful.
Red
Off
Solid green
BBU
Flashing green
Off
USB1、USB2
Solid green
Flashing green
Description
The device is not powered on or the network
link is not established.
The network link has been established but no
data is being transmitted or received.
Session overlapping detection is being
implemented or negotiation fails.
There is no standby power supply or the
standby power supply fails.
The standby power supply is used and operates
properly.
The standby power supply is used but operates
improperly. For example, undervoltage occurs.
The device is not powered on or the USB
interface is not connected.
The USB interface is connected and operating
in host mode, but no data is being transmitted.
Data is being transmitted on the interface.
Interface
Figure 4-1 shows the interfaces and buttons on the side panel of the ZXHN
F680.
Figure 4-1 Interfaces and Buttons on the Side Panel
Table 4-1 describes the interfaces and buttons on the side panel of the ZXHN
F680.
Table 4-1 Descriptions of the Interfaces and Buttons on the Side Panel
Interface/Button Description
On/Off
Power switch.
WPS
Wi-Fi protection button. To enable the Wi-Fi protection function,
press this button, so that users can access the network without
entering their passwords.
Wi-Fi
WLAN button for enabling or disabling the WLAN function.
USB2
Standard USB 3.0 interface, connected to a USB storage device
for file sharing, fast backup, and data restoration.
Figure 4-2 shows the interfaces on the back panel of the ZXHN F680.
Figure 4-2 Interfaces on the Back Panel
Table 4-2 describes the interfaces on the back panel of the ZXHN F680.
Table 4-2 Descriptions of the Interfaces on the Back Panel
Interface
Description
Power
12 V DC power connector.
USB1
Reset
Standard USB 2.0 interface, connected to a USB storage device
for file sharing, fast backup, and data restoration.
Reset button, when the power is on, use a needle to press the
button for over 5 seconds to restore the default settings.
LAN1– LAN4
RJ-45 Ethernet interface.
Phone1、Phone2
RJ-11 telephone interface, connected to the telephone with RJ-11
telephone cable.
Interface
Description
PON
PON interface.
BBU
Standby power supply interface, connected to a standby power
supply through a dedicated cable.
Product Features
Interfaces
� GPON
�
�
�
�
interface:
GPON standard, SC/APC, comply with ITU
G.984.1–G.984.5 standards
Ethernet interface: auto-sensing RJ-45 interface in compliance with IEEE
802.3 and IEEE 802.3u.
Phone interface: RJ-11
WLAN interface: complies with IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g
and IEEE 802.11n.
USB interface: standard USB 2.0 and USB 3.0 interface.
Technical Features
� Broadband service access: Connected to Internet through the GPON access
method.
� Ethernet service access: Provides Ethernet interfaces, connected to the Eth�
�
�
�
�
�
ernet devices, such as the user PC. Provides the Internet access and IPTV
services.
Phone service access: Supports SIP protocol.
WLAN: Users can connect to the ZXHN F680 through WLAN.
Data sharing, backup, and restoration: provides the USB 2.0 and USB 3.0
interface connected to a USB storage device for file sharing, fast backup, and
data restoration.
Security: Provides multi-level authentication based on the device, user and
service, and provides the data channel encryption for safety.
QoS: Provides QoS services meeting the requirements of various services
for the local devices and network
Network management: Provides multi-mode network management.
Technical Specification
For the technical specifications of the ZXHN F680 , refer to Table 6-1.
Table 6-1 Technical Specifications
Item
Specification
Dimension
220 mm (W) × 35 mm (D) × 310 mm (H)(Antenna
included)
Rated current
2A
Item
Specification
Rated voltage
12 V DC
Operation temperature
0℃ ~ 40℃
Operation humidity
5% ~ 95%
Cable Connection
Figure 7-1 shows the devices that are connected to the ZXHN F680.
Figure 7-1 Entire Connection
Note:
The USB2 interface is on the side of the ZXHN F680.
Verify that the cable connections are correct, and press the On/Off button. After
the power indicator is lit and other indicators operate properly, services of the
carrier can be used.
Troubleshooting
The Power indicator on the front panel is off after the power button is pressed.
The power adapter is not correctly connected to the device. Be sure to use the
power adapter supplied with the device.
The LOS indicator is flashing red or solid red after the device is powered on.
� The optical fiber is not correctly connected to the ONT PON interface.
� The optical fiber is broken or damaged.
� If the indicator is solid red or keeps flashing, please contact the service
provider for maintenance.
The PON indicator on the front panel is off or flashing green after the device is
powered on.
� The GPON link is not established.
� The ONT is not registered.
� Please contact the service provider for help.
The green LAN indicator on the front panel is off after the device is powered on.
� The corresponding LAN link is not established.
� The Ethernet cable is not correctly connected to the LAN interface.
� The network device connected to the LAN interface is not powered on.
The Phone indicator on the front panel is off after the device is powered on.
The telephone function is abnormal. Please contact the service provider for
help.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
� Reorient or relocate the receiving antenna.
� Increase the separation between the equipment and receiver.
� Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
� Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly
approved by the party responsible for compliance could void the user's authority
to operate this equipment. (Example- use only shielded interface cables when
connecting to computer or peripheral devices).
FCC Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter. This equipment should be
installed and operated with a minimum distance of 20 centimeters between the
radiator and your body.
This equipment complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that
may cause undesired operation.
Caution!
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.


---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Create Date                     : 2005:04:15 15:28:02+08:00
Creator Tool                    : Arbortext 5.4
Modify Date                     : 2015:11:02 15:44:44+08:00
Metadata Date                   : 2015:11:02 15:44:44+08:00
Graphics 0020resolution         : 600
JPEG0020quality                 : 80
Compression 0020type            : auto
EPS0020processor                : PStill version 1.74.14
Config 0020 File                : C:\Program Files\PTC\Arbortext Editor\lib\standard.pdfcf
Compression 0020level           : 6
Graphics 0020resolution 0020threshold: 900
Producer                        : PDFlib+PDI 7.0.4 (Win32)
Format                          : application/pdf
Document ID                     : uuid:e5c43136-f96c-485d-aca3-0c456b857727
Instance ID                     : uuid:0a86d8a3-abe2-4844-84ff-926a4d21a37b
Has XFA                         : No
Page Count                      : 14
Page Layout                     : SinglePage
Creator                         : Arbortext 5.4
Graphics Resolution             : 600
JPEG Quality                    : 80
Compression Type                : auto
EPS Processor                   : PStill version 1.74.14
Config File                     : C:\Program Files\PTC\Arbortext Editor\lib\standard.pdfcf
Compression Level               : 6
Graphics Resolution Threshold   : 900

EXIF Metadata provided by EXIF.tools