ZTE ZXHNH267N Home Gateway User Manual

ZTE Corporation Home Gateway

Contents

User Manual

ZXHN H267N Home Gateway User Manual
ZXHN H267N Home Gateway User Manual Manual No: SJ-20140702105807-001 Edition Time: 2014-07-09 (R1.0) LEGAL INFORMATION 0197 Copyright © 2014 ZTE CORPORATION. The contents of this document are protected by copyright laws and international treaties. Any reproduction or distribution of this document or any portion of this document, in any form by any means, without the prior written consent of ZTE CORPORATION is prohibited. Additionally, the contents of this document are protected by contractual confidentiality obligations. All company, brand and product names are trade or service marks, or registered trade or service marks, of ZTE CORPORATION or of their respective owners. This document is provided “as is”, and all express, implied, or statutory warranties, representations or conditions are disclaimed, including without limitation any implied warranty of merchantability, fitness for a particular purpose, title or non-infringement. ZTE CORPORATION and its licensors shall not be liable for damages resulting from the use of or reliance on the information contained herein. ZTE CORPORATION or its licensors may have current or pending intellectual property rights or applications covering the subject matter of this document. Except as expressly provided in any written license between ZTE CORPORATION and its licensee, the user of this document shall not acquire any license to the subject matter herein. ZTE CORPORATION reserves the right to upgrade or make technical change to this product without further notice. Users may visit ZTE technical support website http://sup- port.zte.com.cn to inquire related information. Hereby, ZTE Corporation, declares that this Radio LAN device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. The ultimate right to interpret this product resides in ZTE CORPO- RATION.
1 Safety Precautions Warning! Before using the device, read the following safety precautions. ZTE bears no liability to the consequences incurred by violation of the safety instructions. Usage Cautions � Read all the safety cautions carefully before using the device. � Only use the accessories included in the package, such as power supply adapter and battery. � Do not extend the power cord, otherwise the device will not work. � The power supply voltage must meet the requirements of the device input voltage (The voltage fluctuation range is less than 10%). � Keep the power plug clean and dry to prevent any risk of electric shock or other dangers. � Disconnect all the cables during a lightning storm to prevent the device from damage. � Power off and unplug the power plug when the device is not in use for a long time. � Do not attempt to open the covers of the device. It is dangerous to do so when the device is powered ON. � Do not directly stare at the optical interface to prevent any eye injuries. � Power off and stop using the device under the conditions such as, abnormal sound, smoke, and strange smell. Contact the service provider for mainte- nance if the device is faulty. Environment Requirements � Ensure proper ventilation to the device. Place the device away from direct sunlight. � Keep the device ventilated and dry. Never spill any liquid on the device. � Do not place any object on the device to prevent any deformation or damage to the device. � Do not place the device near any source of heat or water. � Keep the device away from any household appliances with strong magnetic or electric fields, such as microwave oven and refrigerator.
Cleaning Requirements � Before cleaning, power off the device, and unplug all the cables connected to the device, such as power cable, optical fiber, and Ethernet cable. � Do not use any liquid or spray to clean the device. Use a soft dry cloth. Environment Protection � Do not dispose the device or battery improperly. � Observe the local regulations about the equipment disposal or treatment. Environmental Information The equipment you purchased has required the extraction and use of natural resources for its production. It may contain substances that are hazardous to people’s health and to the environment. To avoid putting such substances into our environment and to reduce pressure on our natural resources, we ask that you reuse or recycle your end-of-life equipment by using an accredited electronics take-back system. The symbols below indicate that this product should be reused or recycled and not simply discarded. Please locate and use an appropriate reuse and recycling site. If you need more information on collection, reuse and recycling systems, con- tact your local or regional waste administration. You may also contact your equipment provider for more information on the environmental performances of these products. FCC - PART 68 This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of this equipment is a label that contains, among other information, a product identifier in the format US: ZTEDL01BHNH267N. If requested, this number must be provided to the telephone company. This equipment uses the following USOC jacks: RJ-11. REN (RINGER EQUIVALENT NUMBERS) ：0.12B STATEMENT Notice: The Ringer Equivalence Number (REN) assigned to each terminal device provides an indication of the maximum number of terminals allowed to be connected to
a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed 5. ATTACHMENT LIMITATIONS STATEMENT Notice: This equipment meets telecommunications network protective, operational and safety requirements as prescribed in the appropriate Terminal Equipment Technical Requirements document(s). This is confirmed by marking the equipment with the Industry Canada certification number. The Department does not guarantee the equipment will operate to the user's satisfaction. Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local telecommunications company. The equipment must also be installed using an acceptable method of connection. The customer should be aware that compliance with the above conditions may not prevent degradation of service in some situations. Repairs to certified equipment should be coordinated by a representative designated by the supplier. Any repairs or alterations made by the user to this equipment, or equipment malfunctions, may give the telecommunications company cause to request the user to disconnect the equipment. Users should ensure for their own protection that the electrical ground connections of the power utility, telephone lines and internal metallic water pipe system, if present, are connected together. This precaution may be particularly important in rural areas. Caution: Users should not attempt to make such connections themselves, but should contact the appropriate electric inspection authority, or electrician, as appropriate FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Caution! The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user authority to operate the equipment. 2 Cable Connection Figure 2-1 shows the devices that are connected to interfaces of the ZXHN H267N device. Figure 2-1 Cable Connection 
Figure 2-1 Cable Connection
The product is targeted to pvovide 24-hours continuous triple-play services, including VOIP. Figure 3-1 shows the interfaces and buttons on the back panel of the ZXHN H267N device. Figure 3-1 The Back Panel
Figure 2-1 Cable ConnectionTable 3-1 describes the interfaces and buttons on the back panel and side panel of the ZXHN H267N device. Table 3-1 Interfaces and Buttons Interface/Button Description ON/OFF Power switch Power 12 V DC power connector Phone1/Phone2 RJ-11 telephone interface, connected to the telephone with RJ-11 telephone cable. LAN1/LAN2/LAN3 RJ-45 FE Ethernet interface LAN4/WAN RJ-45 GE Ethernet interface, WAN interface is optional. DSL RJ-11 DSL interface Reset Reset button When the power is on, use a needle to press the button for over 5 seconds to restore the default settings. WLAN WLAN button Enable/disable the WLAN function. WPS WPS button Enable/disable the Wi-Fi protection. When the Wi-Fi protection is enabled, users can access the network automatically. USB USB 2.0 interface • The USB interface is on a side of the ZXHN H267N. 4 Indicator
Figure 4-1 shows the indicators on the front panel of the ZXHN H267N unit.
Figure 4-1 The Front PanelLED Indicator Status Description Power Solid green The ZXHN H267N is powered ON. OFF The ZXHN H267N is powered OFF. Table 4-1 describes the indicators on the front panel of the ZXHN H267N unit. Table 4-1 Descriptions of Indicators
LED Indicator Status Description DSL Solid green DSL synchronization is normal and the link connection is normal.Fast Flashing Now in the handshaking process to establish the link connection. Slowly Flashing Physical link exists, however carrier wave has not been detected. OFF Link has not been established. Internet Solid green The connection is established and a correct IP address is obtained. Flashing Currently in data transmission. OFF Internet connection is not established, or the ZXHN H267N is switched off.
LED Indicator Status Description WLAN Solid green The WLAN RF switch is on. Flashing green Currently in data transmission. Flashing frequency indicates WiFi network traffic. Solid red WPS access is successful. This solid-on light will be automatically off after 5 minutes. Fast flashing red The WPS accessing of the WLANterminal is faulty. Slowly flashing red WLAN terminal is in WPS accessing process. OFF The WLAN RF switch is off.No WPS access or the WPS access of the terminal exceeds 5 minutes.LAN1 ～ LAN4 Solid green LAN connection has been established. Flashing Data transmission is in processing. The indicator flashes according to the LAN traffic. OFF LAN connection has not been established.
LED Indicator Status Description Phone1 ～ Phone2 Solid green The ZXHN H267N has registered on the VoIP network. Flashing Indicates when the associated telephone is off-hook. OFF The ZXHN H267N has not been registered on the VOIP network. USB Solid green The USB device is connected. Flashing Currently in data transmission. OFF No USB device.
 NO. 55, Hi-tech Road South, ShenZhen, P.R.China Postcode: 518057 Tel:+86-755-26771900 Fax: +86-755-26770801 URL: http://support.zte.com.cn E-mail: support@zte.com.cn

Navigation menu