Zalman Tech M520W Wireless Mouse User Manual MS 261 SPEC
ZALMAN Tech Co., Ltd Wireless Mouse MS 261 SPEC
Users Manual
1,(Dimensions)
Model No.
Length:
Width:
Height:
Weigh:
2、 (Electrical specifications)
①
③
⑤
The indicating lamp working state
AA*1
Acceleration:
Speed:
Battery Spec:
28in/s
Work
frequency
band 2403-2478Mhz
Resolution: 1000/1600 DPI 10G
The working distance
8m
Group
channels 16
Mouse
The mouse manual
51g
58mm
31mm
ZM-M520W
100.5mm
Operating Voltage: DC 1.5V
Operating
Current: 10mA
3000fps
Scanning Frequency:
Battery Life:
Mouse Type: 2.4G
Three months
the right mouse button
The middle mouse button mouse CPI conversion key
The power switch
②
④
⑥
the left mouse button
Weak light
direction for use
a .Part: the mouse 1PCS receiver 1PCS AA cell 1PCS.
b .The receiver is inserted into the USB interface of the computer, the computer will automatically install the driver.
C . Open the battery cover of the mouse, the AA battery into the battery slot, and then loaded on the battery cover.
D .The power switch to NO position, press the mouse button can be normal use.
Weak functional indicator
Low power state indicating lamp twinkle to 4HZ
DPI Function indicator
800DPI Slow flashing/1600DPI quick flashing
FCC Certification Requirements Caution: Any changes or modifications in construction of this device which are not
expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any
interference received, including interference that may cause undesired operation.
The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such
modifications could void the user’s authority to operate the equipment. This equipment has been
tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct
the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.