Zanussi Iz 141 S Instruction Booklet 132992340
IZ 161 W to the manual d3282753-7090-4b54-a874-8ad481549ea1
2015-01-05
: Zanussi Zanussi-Iz-141-S-Instruction-Booklet-209083 zanussi-iz-141-s-instruction-booklet-209083 zanussi pdf
Open the PDF directly: View PDF 
.
Page Count: 28
| Download | |
| Open PDF In Browser | View PDF |
132992340.qxd 4/30/03 11:19 AM Pagina 1 (Nero/Process Black pellicola) WASHING MACHINE IZ 141 W- IZ 141 S IZ 161 W- IZ 161 S DELAY ON / OFF COTTONS SYNTHETICS DELICATES WOOL HAND WASH 132992340 FA B R IC 90°C 60°C 50°C 40°C 30°C 1200 900 700 500 EM SP T INNOVATION FROM ZANUSSI PREWASH SUPER RINSE RINSE HOLD P E R AT U R E JETSYSTEM IN S PEE D OP TI O N S SKIP QUICK T IM E S AV E S TAR T /PA U S E IZ 12 PREWASH WASH RINSES SPIN DRAIN R E SET INSTRUCTION BOOKLET GB 132992340.qxd 4/30/03 11:19 AM Pagina 2 (Nero/Process Black pellicola) Important Safety Information It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is supplied with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant warnings. These warnings have been provided in the interest of safety. You MUST read them carefully before installing or using the appliance. Installation ● ● ● ● ● ● ● Use This appliance is heavy. Care should be taken when moving it. It is dangerous to alter the specifications or attempt to modify this product in any way. All packing and transit bolts must be removed before use. Serious damage can occur to the product and to property if this is not adhered to. See relevant section in instructions. Any plumbing work required to install this appliance should be carried out by a qualified plumber or competent person. Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. Care must be taken to ensure that the appliance does not stand on the electrical supply cable. If the machine is situated on a carpeted floor, please adjust the feet in order to allow air to circulate freely. ● ● ● ● ● ● Child Safety ● ● ● ● ● ● This appliance is designed to be operated by adults. Children should not be allowed to tamper with the controls or play with the product. Pets and children have been known to climb into washing machines. Please check your drum before use. The glass door becomes very hot during the washing cycle. Keep children away from the vicinity of the appliance whilst it is in operation. Keep all packaging well away from children. Keep all detergents in a safe place out of children’s reach. ● ● ● ● 2 Always unplug the appliance and turn off the water supply after use. Do not overload the appliance. See relevant section in the instruction book. Only wash fabrics which are designed to be machine washed. If in doubt, consult the care label on the clothes. Before washing, ensure that all pockets are empty and buttons and zips are fastened. Avoid washing frayed or torn articles and treat stains such as paint, ink, rust, and grass before washing. Underwired bras must NOT be machine washed. Any objects such as coins, safety pins, nails, screws, stones or any other hard, sharp material can cause extensive damage and must not be placed into the machine. Garments which have been in contact with volatile petroleum products should not be machine washed. If volatile cleaning fluids are used, care should be taken to ensure that the fluid is removed from the garment before placing in the machine. Wash small items such as socks, laces, washable belts etc in a washing bag or pillow case as it is possible for such items to slip down between the tub and the inner drum. Only use the advised quantities of fabric softener. Damage to the fabric can ensue if you over-fill. Refer to the manufacturer’s recommendations of quantities. As some duvets and eiderdowns should be washed in large commercial machines because of their bulk, please check with the manufacturer of the item before washing in a domestic machine. Leave the porthole door slightly ajar between washes to preserve the door seal. Under no circumstances should you attempt to repair the machine yourself. Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Contact your local Service Force Centre. Always insist on genuine Zanussi spare parts. 132992340.qxd 4/30/03 11:19 AM Pagina 3 (Nero/Process Black pellicola) Contents For the User Important Safety Information Your New Washing Machine Description of the Appliance 2 4 5 5 5 5 Door locked light Detergent dispenser drawer Child safety feature The Control Panel Operating sequence Load the laundry Measure out the detergent Measure out the fabric softener Switch the machine on Select the required programme/fabric Select the temperature Select the spin speed or the NIGHT WASH option Select the desired options Select the SUPER RINSE or AA40° option Select the DELAY TIME Start the programme How to change a programme during its cycle How to cancel a programme during its cycle How to open the door during the cycle of a programme End of programme Washing Hints Installation Instructions Technical Specifications Unpacking Positioning Water inlet Water drainage Levelling Special conditions In the interest of the environment Electrical connection 11-13 11 11 11 11 11 12 12 12 12 12 12 13 13 13 13 14-15 15 15 Which detergent?.... And in which form? Wash Care Symbols Washing Programmes Maintenance and Cleaning 20-21 21 22 For the Installer 6-10 6 Turning the acoustic signal off Descaling After each wash Maintenance Wash External cleaning Cleaning the dispenser drawer Cleaning the drawer recess Cleaning the filter The dangers of freezing Emergency emptying out Something Not Working Service and Spare Parts Guarantee Conditions 16 17 18-19 18 18 18 18 18 18 18-19 19 19 Guide to use the Instruction Book The following symbols will be found in the text to guide you throughout the instructions: Safety instructions Hints and tips Environmental information 3 23 23 24 24 25 25-26 26 26 26 27 132992340.qxd 4/30/03 11:19 AM Pagina 4 (Nero/Process Black pellicola) Your New Washing Machine Your new washing machine, fitted with the Zanussi “JET SYSTEM”, meets all modern requirements for effective treatment of laundry with low water, energy and detergent consumption. Even small loads are washed “economically” because the amount of water used is regulated automatically according to the load and type of fabric. ● ● ● Automatic cooling of the wash water to 60°C before draining, with the 90°C programme. This reduces thermal shock to fabrics, helping to prevent creasing. The special wool programme with its new delicate wash system treats your woollens with extreme care. The anti-unbalance device ensures that the washing machine remains stable when spinning. In the interest of the environment ● ● ● Ecological hints To save water and energy and help protect the environment, we recommend that you follow these hints: ● Normally soiled laundry may be washed without prewashing in order to save detergent, water and time (the environment is protected too!). ● The machine works more economically if it is fully loaded. ● With adequate pre-treatment, stains and limited soiling can be removed; the laundry can then be washed at a lower temperature. ● Measure out detergent according to the water hardness, the degree of soiling and the quantity of laundry being washed. ● Materials marked with the symbol are recyclable. Check with your local Council or Environmental Health Office to see if there are facilities in your area for re-cycling this appliance. When the appliance is to be scrapped, cut off the power supply cable and make the door lock device unusable to prevent young children from being trapped inside. Help to keep your country tidy - use authorised disposal sites for your old appliance. How do we help to protect the environment? We use recycled paper! Important Your machine is fitted with a balance control device, which ensures the machine is stable during the spin. If the wash load appears not to have been spun sufficiently at the end of the wash cycle, because it is not evenly distributed in the drum, the balance control device may have operated. It will therefore be necessary to redistribute the wash load manually and select a spin programme. For more detailed information see the section headed “Something Not Working”. 4 132992340.qxd 4/30/03 11:19 AM Pagina 5 (Nero/Process Black pellicola) Description of the Appliance 1 1 Detergent dispenser drawer 2 Control panel 3 Door locked light 4 Door opening handle 5 Filter 6 Adjustable feet 2 DELAY ON / OFF COTTONS SYNTHETICS DELICATES WOOL HAND WASH FA B R IC EM T INNOVATION FROM ZANUSSI 1200 900 700 500 90°C 60°C 50°C 40°C 30°C PREWASH SUPER RINSE RINSE HOLD P E R AT U R E JETSYSTEM SP IN S PEE D OP TI O N S SKIP QUICK T IM E S AV E S TAR T /PA U S E IZ 12 PREWASH WASH RINSES SPIN DRAIN R E SET 3 4 Door locked light 5 It stays on during the whole programme indicating that the door is locked. When the light goes out, the door can be opened (see page 12). 6 Detergent dispenser drawer Prewash Main wash Fabric softener C0063 Child safety feature This machine incorporates a special child safety feature to prevent small children from being trapped inside the machine. To activate this device, rotate the button (without pressing it) inside the door clockwise until the groove is horizontal. If necessary use a coin. To disable this device and restore the possibility of closing the door, rotate the button anti-clockwise until the groove is vertical. P1076 5 132992340.qxd 4/30/03 11:20 AM Pagina 6 (Nero/Process Black pellicola) The Control Panel DELAY EM SP T 1400 1200 900 700 NIGHT WASH FA B R I C 1 2 3 P E R AT U 4 I N S P EE PREWASH OUTDOOR SPORTS SUPER RINSE D W AS H CHO 5 I 6 OP S TA R TI O N S 7 1 ON/OFF button SKIP AA40° QUICK CE HAND WASH 90°C 60°C 50°C 40°C 30°C RE O N / O FF COTTONS SYNTHETICS DELICATES WOOL 8 T / PA U S E 9 IZ 141 W PREWASH WASH RINSES SPIN DRAIN R ESET 10 11 12 IMPORTANT! By pressing the TEMPERATURE and SPIN SPEED buttons simultaneously, the acoustic signal is deactivated at the end of the cycle, when selecting the programmes and in case of an incorrect option selection . By pressing these 2 buttons again the acoustic signal is reactivated. Press this button to switch the washing machine on. The display (8) will show three blinking dashes or a blinking zero. You will find more detailed explanations on pages 7-8 (see “DISPLAY”). Press the ON/OFF button again to switch the machine off. 2 MAINS-ON light This light is connected to the ON/OFF button. It lights up when you press the button, and goes out when you press it again. 5 SPIN SPEED button Press this button repeatedly to change the spin speed, if you want your laundry to be spun at a speed different from the one proposed by the washing machine. The relevant light will light up. Maximum speeds are: • for cotton: 1,600, or 1,400 rpm depending on the model; • for synthetic fabrics, wool and fabrics to be handwashed: 900 rpm; • for delicate fabrics: 700 rpm. NIGHT WASH position : when you choose this option, the machine will not drain the water of the last rinse, so as not to wrinkle the laundry. As all spinning phases are suppressed, this washing cycle is very quiet and it can be useful at night or in times with a more economical power rate. On cotton and synthetic programmes the rinses will be performed with more water. At the end of the cycle, the light corresponding to the option NIGHT WASH is on and the START/PAUSE button light will flash, to indicate that the water must be drained. A static zero will appear on the display. To complete the cycle, choose one of the following options: 3 FABRIC button Press this button repeatedly to select the programme on the basis of the type of laundry to be washed. The light relevant to the selected programme will light up. The washing machine will propose a temperature and automatically select the maximum spin value provided for the programme you have chosen. You can change these values by operating buttons 4 and 5. Hand wash When you select this programme, you obtain a particularly delicate washing, suitable for articles of clothing whose label indicates that they must be handwashed . 4 TEMPERATURE button Press this button repeatedly to increase or decrease the temperature, if you want your laundry to be washed at a temperature different from the one proposed by the washing machine. The relevant light will light up. Maximum temperatures are 90°C for cotton, 60°C for synthetic fabrics, 40°C for delicate fabrics, wool and fabrics to be hand-washed (HAND WASH programme). 6 132992340.qxd 4/30/03 11:20 AM Pagina 7 (Nero/Process Black pellicola) The PREWASH, the OUTDOOR SPORTS and the QUICK options cannot be selected together. • Draining and spin: - Press the START/PAUSE button. The machine will drain the water, then spin the laundry at the maximum speed provided for the selected programme. - Select spin speed by means of button 5, and press the START/PAUSE button. • Drain only - Press the SKIP/RESET button once, so as to cause the DRAIN light to light up, then press the START/PAUSE button. Important! If you accidentally press the SKIP/RESET button more than once, the display will show three blinking dashes. To cause the washing machine to drain the water, select any washing programme by means of the FABRIC button, then press SKIP/RESET three times in order to select the DRAIN position (only the DRAIN light will remain lit). 7 OPTIONS button Press this button to select the following options: • SUPER RINSE: this option can be selected with all programmes except the wool programme and hand wash. The machine performs 4 rinses instead of 3. This option is recommended for people who are allergic to detergents, and in areas where the water is very soft. • AA 40°: this option can be selected for cottons and synthetics lightly or normally soiled with a temperature of 40°C or higher . If you select 40°C , the machine will prolong the time at 40°C in the washing phase, this will allow an A class in energy efficiency and washing performance to be achieved. If you select 90°C and press the AA 40° button, the washing temperature will be reduced from 90°C to 60°C. If you select 60°C or 50°C and press the AA 40° button, the washing temperature will be reduced to 40°C. In both cases the washing time will be extended. The SUPER RINSE and the AA 40°options can be selected together by means of the relevant button. 6 WASH CHOICE button This button allows you to select the QUICK function, for laundry that is only slightly soiled (not for WOOL and HAND WASH programme). The washing time will be reduced according to the type of fabric and the selected temperature. Press this button to select the following options: • PREWASH: select this option if you wish your laundry to be prewashed before the main wash (not available for wool and hand-wash cycle). The prewash ends with a short spin at 650 rpm in programmes for cotton and synthetic fabrics, whereas in the programme for delicate fabrics the water is only drained. • OUTDOOR SPORTS: select this option if you wish to perform a soak of about 30 minutes at 30°C to your laundry. By pressing the DELAY button the soak time can be extended up to 24 hours max. After this time the wash cycle will automatically start. This function is not available for wool and hand-wash cycle. The soak ends with a short spin at 650 rpm in programmes for cotton and synthetic fabrics, whereas in the programme for delicate fabrics the water is only drained. • QUICK: select this option for laundry that is only slightly soiled. The washing time will be reduced according to the type of fabric and the selected temperature. 8 Display The following pieces of information are shown on the display: • Three blinking dashes, when a programme is cancelled by means of the SKIP/RESET button. The three blinking dashes will also appear when you press the ON/OFF button to switch the machine on, if the previously selected cycle has been erased. --- 7 132992340.qxd 4/30/03 11:20 AM Pagina 8 (Nero/Process Black pellicola) • Duration of washing programme in hours and minutes, after you have selected a programme. While the programme is running (after you have pressed the START/PAUSE button), the displayed time value decreases by one unit every minute. • The washing machine has stopped with water in the tub, at the end of a programme with the NIGHT WASH option: this is indicated by a static zero. • The washing machine has completed the programme: this is indicated by a blinking zero. At the same time, the door locked light goes out. The zero will reappear when you switch the washing machine on, unless the previous programme has been erased by means of the SKIP RESET button. Important! The first time you use the washing machine, when you switch it on, it may display a blinking zero and give an audible warning signal. This is due to the fact that the washing machine has performed a washing cycle during the manufacturer’s inspection tests, and this cycle has not been erased after its completion. The incorrect selection is also indicated by an audible warning signal. • An alarm code indicates a fault in the machine operation (see the relevant chapter on page 19). E20 9 START/PAUSE button This button has three functions: • Start: after you have selected the desired programme and options, press this button to start the washing machine. The light above the button will stop flashing and remain lit. If you have selected a time delay by means of button 11, the countdown will begin and will be shown on the display. • Delay start, a time value indicated in hours and selected by means of the relevant button. • Pause: when you press this button again, the programme in progress is interrupted. The light above the button will start flashing. To restart the programme, press the button again. When you PAUSE the cycle, the DOOR LOCKED light goes out, and it becomes possible to open the door, provided • the washing machine is not in the heating phase; • the level of the water is not high; • the drum is not turning. Important! You must set the washing machine to PAUSE before you make any change in the programme in progress. • Draining of water and spinning after the completion of programmes with the NIGHT WASH option. The delay time is displayed for 3 seconds, then the duration of the selected programme reappears. After you have pressed the START/PAUSE button, the countdown begins, and the delay time value decreases by one unit every hour. You can delay the start of the selected programme by up to 24 hours in one hour intervals. • An incorrect option selection has been made: this is indicated by the message Err when a function incompatible with the current programme is selected. 10 SKIP/RESET button This button performs two functions: - Clears the memory - Selects special programmes At the end of every programme the RESET button must be pressed once or repeatedly to clear the programme memory. This will be confirmed by three dashes, flashing in the display. If the previous programme is not cleared, the display will show a “0” flashing and an audible signal will sound, when you switch the machine on. 8 132992340.qxd 4/30/03 11:20 AM Pagina 9 (Nero/Process Black pellicola) To select Drain the programme must be paused, now press the SKIP button three times, the wash - rinses spin LED,s go out. Selecting a special programme: A wash programme must be selected in the normal way. (START button not pressed) PREWASH WASH RINSES SPIN S TA R T / P A U S E DRAIN The SKIP button is then used to cancel or advance the programme to the required phase. The SKIP button can only operate when the programme is in pause. A normal wash cycle consists of the following phases, Wash - Rinses - Spin and is confirmed by the illumination of the corresponding LED,s. 11 DELAY button This button makes it possible to delay the starting of the programme by up to 24 hours. The delay you have selected is shown on the display for about 3 seconds; afterwards, the duration of the programme reappears. If OUTDOOR SPORTS option has been chosen the selected delay will correspond to the soak time. PREWASH You must select this option after you have set the programme and before you press the START/PAUSE button. The time value shown on the display will decrease by one unit every hour. You can change the delay time at any moment, before you press the START/PAUSE button. If you have already pressed the START/PAUSE button, and you wish to change or cancel the delay time, proceed as follows: WASH RINSES SPIN DRAIN To select rinses & spin, the programme must be paused, now press the SKIP button once, the wash LED goes out. PREWASH Delay Start only (without the OUTDOOR SPORTS option): • set the washing machine to PAUSE by pressing the START/PAUSE button; • press the DELAY button until the display shows the desired delay time or • press the DELAY button once, to erase the delay time. The display will indicate “0h”. • press the START/PAUSE button again. WASH RINSES SPIN DRAIN To select spin only, the programme must be paused, now press the SKIP button twice. The wash & rinses LED,s go out. Delay Start with the OUTDOOR SPORT option: • set the washing machine to PAUSE by pressing the START/PAUSE button; • press the SKIP/RESET button once or repeatedly until three dashes appear on the display in order to clear the memory; • select the programme again and eventually a new delay time; • press the START/PAUSE button again. PREWASH WASH RINSES SPIN DRAIN 9 132992340.qxd 4/30/03 11:20 AM Pagina 10 (Nero/Process Black pellicola) Important! The door will be locked throughout the delay time (DOOR LOCKED light lit). If you need to open the door, you must first set the washing machine to PAUSE by pressing the START/PAUSE button. After you have closed the door, press the START/PAUSE button again. 12 Programme phase indicator lights When you select a programme, the lights relevant to the phases that form the programme light up. After you have started the programme, only the light relevant to the phase that is currently being carried out will remain lit. 10 132992340.qxd 4/30/03 11:20 AM Pagina 11 (Nero/Process Black pellicola) Operating Sequence 4. Switch the machine on Before the first wash, we recommend that you run a cotton cycle at 60°C, without any laundry in the machine, to remove any manufacturing residue from the drum and tub. Pour 1/2 a measure of detergent into the dispenser drawer and start the machine. Press the ON/OFF button to switch the machine on. The display will show three blinking dashes or a blinking zero. The light above the button will light up. O N / OFF 1.Load the laundry Open the door. Place the laundry in the drum, one item at a time, shaking them out as much as possible. Close the door. 0 --- 5. Select the desired programme/ fabric Press the FABRIC button repeatedly, in order to select the desired programme/fabric. The relevant light will light up. The lights relevant to the phases that form the programme will light up. The display will show the duration of the selected programme, calculated on the basis of the maximum load for each type of fabric. The START/PAUSE button light will start flashing. If the load of laundry to be washed is small, at the beginning of the cycle the display will still indicate the duration relevant to the maximum load. The duration value will be gradually adjusted during the execution of the cycle. P1084 2.Measure out the detergent Pull out the dispenser drawer until it stops. Measure out the amount of detergent required and pour it into the main wash compartment . If you wish to carry out the prewash or a soak programme (OUTDOOR SPORTS), pour detergent into the appropriate compartment marked . 3.Measure out the fabric softener COTTONS SYNTHETICS DELICATES WOOL If required, pour fabric softener into the compartment marked , without exceeding the «MAX» mark. HAND WASH PREWASH WASH RINSES SPIN FA B RIC C0064 C0065 Close the drawer gently. 11 DRAIN 132992340.qxd 4/30/03 11:20 AM Pagina 12 (Nero/Process Black pellicola) 6. Select the temperature 9. Select the SUPER RINSE or AA40° option Press the TEMPERATURE button if you wish to select a temperature value different from the one proposed by the washing machine. The relevant light will light up. If you wish the laundry to undergo an extra rinse, select the SUPER RINSE option. If your laundry is lightly or normally soiled and it is necessary to prolong the washing time, select the AA40° option. The relevant light illuminates. Press the OPTIONS button so as to cause one of the lights to light up. T EM RE 90°C 60°C 50°C 40°C 30°C P ER ATU SUPER RINSE AA40° 7. Select the spin speed or the NIGHT WASH option OP Press the SPIN SPEED button repeatedly, in order to select the desired spin speed or the NIGHT WASH option. The relevant light will light up. If you select the NIGHT WASH option, the machine will stop at the end of the programme with the water still in the tub. 10. Select the DELAY TIME Before you start the programme, if you wish the starting to be delayed, press the DELAY button repeatedly, or keep it pressed, to select the desired delay. The selected delay time value (up to 24 hours) will appear on the display for 3 seconds, then the duration of the programme will appear again. If the OUTDOOR SPORTS button has been pressed the selected delay will correspond to the soak time. If no delay time is selected the soak programme will last about 30 minutes. 1400 1200 900 700 NIGHT WASH N SPEE D S PI TIO N S 8. Select the desired options DELAY If your laundry is very dirty, it may be advisable to select the PREWASH option. If you wish the laundry to undergo a soak, select the OUTDOOR SPORTS option. If your laundry is only slightly soiled, select the QUICK WASH option. 11. Start the programme Press the START/PAUSE button. The relevant light will stop flashing, the DOOR LOCKED light will light up, and only the light relevant to the phase that is in progress will remain lit. If you have chosen a delayed start, the washing machine will begin the countdown. The display will show the duration of the programme or the selected delay. PREWASH OUTDOOR SPORTS W AS CE QUICK H CH O I 12 132992340.qxd 4/30/03 11:20 AM Pagina 13 (Nero/Process Black pellicola) 12. How to change a programme during its cycle Should it not be possible to open the door, and should it be absolutely necessary to do so, switch the machine off by pressing the ON/OFF button. After approximately 3 minutes, you can open the door. Pay attention to the level and temperature of the water in the washing machine! When you close the door and press the ON/OFF button again, the washing machine will resume the programme from the point where it had been interrupted. Before you make any change, you must pause the washing machine by pressing the START/PAUSE button. It is possible to change any phase before the programme carries it out. Changing the type of fabric or temperature is possible, obviously, only during the washing phase. When you make a change in these two parameters, the washing machine will resume the cycle from the beginning. If it is necessary to drain the water in order to change the programme in progress, proceed as follows: • PAUSE the machine by pressing the START/PAUSE button; • press the SKIP/RESET button repeatedly, until only the DRAIN light remains lit; 15. End of programme At the end of the programme, the washing machine stops automatically, gives an audible signal, and displays a blinking zero. If you had selected the NIGHT WASH option, the START/PAUSE button light flashes to indicate that the water must be drained. The display shows a steadily lit zero. When the programme has been completed, a blinking zero appears on the display and the audible signal is given. The DOOR LOCKED light goes out at once. Press the SKIP/RESET button repeatedly to erase the programme that has just been carried out. If you omit to do this, the next time you switch the washing machine on, the blinking zero will appear on the display and you will hear the audible signal. • press the START/PAUSE button again. When the water has been drained, the display shows a blinking zero. You may now select a new programme and press the START/PAUSE button to start it. 13. How to cancel a programme during its cycle To cancel a programme that is being carried out, first pause the washing machine by pressing the START/PAUSE button, then press the SKIP/RESET button repeatedly, until the display shows three blinking dashes. Note: when you switch the machine on, if you must erase the previously performed programme, it is also sufficient to press the FABRIC button and select a new programme. Press the ON/OFF button to switch the machine off. The relevant light will go out. Remove the laundry from the washing machine. Check whether the drum is completely empty, by rotating it with your hand. The purpose of this is to prevent any items of laundry from remaining accidentally in the drum, where they might get damaged in a subsequent wash (e.g. by shrinking) or bleed colour into another load of laundry. We advise you to close the water supply tap and disconnect the plug from the socket. Leave the door ajar in order to air the washing machine. 14. How to open the door during the cycle of a programme You can open the door, after having set the washing machine to PAUSE, provided the following conditions exist: • the washing machine is not in the heating phase beyond 55°C; • the level of the water is not high; • the drum is not turning. If these requirements are met, when you pause the washing machine, the DOOR LOCKED light goes out and the door can be opened. 13 132992340.qxd 4/30/03 11:20 AM Pagina 14 (Nero/Process Black pellicola) Washing Hints Do NOT overload the machine. Weigh the laundry the first few times you use the appliance. ● The average weights of the most common items are listed below as a guide: ● 1000g = 1 kg Sheet 700-1000 g Pillow case 100-200 g Tablecloth 400-500 g Serviette 50-100 g Tea towel 70-120 g Linen hand towel 100-150 g Towelling hand towel 150-250 g Towelling bath towel 700-1000 g Bath robe ● ● 1000-1500 g ● Man’s shirt 200-300 g Apron 150-200 g Bleach is very corrosive; it should be used with care and kept out of reach of children. Some stains such as fruit, wine, grass, rust etc. are difficult to remove and should be treated before washing with specific products, which can be found in most household shops. In some cases it may help to soak the stain before washing with a special presoak product or biological detergent. Only wool marked “Pure New Wool - washable, preshrunk” can be washed in the machine using the wool programme; other types of wool should be washed by hand or dry cleaned. If you have used the machine to wash, rinse or spin only non-colour fast garments, there may be dye left in the sump. To ensure any subsequent wash is not contaminated with the dye, select and carry out a rinse and spin programme, without any garments, to ensure that any dye is removed from the sump. Once you have finished using the machine, you are advised to unplug it and turn off the water tap. «JETSYSTEM» wash ● ● ● ● ● ● ● ● ● ● ● ● ● As the Jetsystem is flexible and adjusts water intake according to wash load size it is not possible to give you exact recommendations as to the amount of detergent that should be used for any one wash. Therefore we recommend that you use approximately 1/3 less than the detergent manufacturer recommends on the packet or bottle, making the appropriate allowances for soft or hard water, and light or heavy soilage of clothes. If you have judged the amount correctly you should expect to see a soft sudsy liquid during the wash. It is not necessary to have a head of lather on the water. Load the laundry loosely alternating large items with small ones. Sort the laundry according to the type of fabric, colour-fastness and how dirty it is. Avoid washing unhemmed or torn items as they may unravel. Before washing, empty all pockets of small objects which may have been left inside (coins, keys, screws etc). as these could damage the drain pump. When washing curtains, remove the hooks. Close poppers and zips and fasten loose buttons. It is essential to wash new coloured items separately when washing for the first time. When washing fabrics requiring different wash temperatures together, always select the lowest temperature. White items should not be washed with coloured items. Very small items (handkerchiefs, ribbons, socks etc) should be washed in a washing bag or a pillow case. Use a good quality detergent suitable for automatic washing machines. Use the correct quantities of detergent. For wool, use gentle detergent only in small quantities. 14 132992340.qxd 4/30/03 11:20 AM Pagina 15 (Nero/Process Black pellicola) Which detergent?.... And in which form? To ensure you obtain the best wash results from your appliance, it is important to use the right detergent in your everyday wash, and only detergents recommended for use in automatic machines. To maintain the appearance of your clothes and household textiles and to make them last longer you should use different types of detergent for different washes, whether for whites, colours or delicates. Not only are there different types of detergent, but they are also available in different forms. Whether you chose a powder or liquid in traditional or compact form is your own personal choice. TRADITIONAL POWDERS Pour the powder directly into the dispenser drawer. Do not sprinkle powder onto clothes in the machine drum. TRADITIONAL LIQUIDS WHITES Liquid can be placed in the main wash compartment of the detergent drawer marked with the symbol , start the machine immediately upon placing the detergent in the dispenser drawer. Alternatively the detergent is measured into the specially designed dosing device* which should be placed on top of the laundry, and at the back of the machine drum. We recommend the Ariel product range which is biological and designed to provide excellent cleaning and stain removal even at low temperatures. NON BIOLOGICAL If you prefer to use a non biological detergent, which does not contain enzymes we recommend Fairy. Fairy provides good cleaning and stain removal. COMPACT POWDERS AND LIQUIDS Compact detergents (or concentrates as they are also known) are available in liquid or powder form, and generally require a smaller dosage. Follow the manufacturer’s instructions to ensure the most economical usage. Pour the detergent directly into the dispenser drawer, or alternatively measure the detergent into the specially designed dosing device* which should be placed on top of the laundry, and at the back of the machine drum. COLOUREDS For coloured items you should use a detergent which is designed to clean while maintaining the original colour. Ariel Color does not contain bleach and therefore helps to preserve colours. * If you use a dosing device in a washer dryer, please ensure the dosing device/ball is removed before carrying out a drying programme. DELICATE ITEMS FABRIC CONDITIONERS When washing delicates such as woollens, you should use a product which is specially designed to care for fine fabrics. Dreft Automatic is suitable for woollens and other delicates. These are ideal for improving ‘softness’, and also reduce static cling on synthetics and make ironing easier. They are available in two types: For example Lenor liquid fabric softener, for use in the washing machine/washer dryer. The liquid fabric softener should be poured into the compartment marked with the symbol . Follow the manufacturer’s dosage instructions and never exceed the MAX level. LAUNDRY BLEACH For additional stain removal you may wish to use a product such as Ace Gentle Bleach which is used in addition to your chosen detergent. Ace is suitable for all washable fabrics including silks, woollens and coloureds. Bounce conditioning sheets for use in a tumble dryer. We recommend the conditioning sheets are pinned (using a safety pin) to an article of laundry and placed in the tumble dryer. 15 132992340.qxd 4/30/03 11:20 AM Pagina 16 (Nero/Process Black pellicola) Wash Care Symbols Wash care labels inside garments recommend how to launder your clothes with the best results. The care labelling code is in line with care labelling used in the rest of Europe. The symbols used make it easy to select the correct programme on your washing machine. WASHING SYMBOL WASH ACTION 95 Normal (Maximum) White Cotton or Linen without Special Finishes 60 Normal (Maximum) Cotton, Linen or Viscose without Special Finishes Colourfast at 60°C. 50 Reduced (Medium) Nylon, Polyester/Cotton, Viscose with Special Finishes, Cotton/Acrylic Mix. 40 Normal (Maximum) Cotton, Linen or Viscose Colourfast at 40°C but not 60°C. 40 Reduced (Medium) Acrylics, Acetate, Triacetate, Wool mixes, Polyester/wool blends. 40 Much Reduced (Minimum) Hand wash only FABRIC Wool, wool mixtures, Silks Do not machine wash BLEACHING Chlorine bleach may be used IRONING Hot iron Cotton, Linen, Viscose Warm iron Polyester mixtures, Wool Cool iron Acrylic, Nylon, Polyester DRY CLEANING May be dry cleaned. Other letters and/or a bar beneath the circle will indicate the required process to the dry cleaner. TUMBLE DRYING with high heat setting with low heat setting May be tumble dried X A cross through any symbol means «DO NOT» Important Notes fabric conditioner to avoid the conditioner entering the machine prematurely. When using liquid detergent and a prewash programme, place the detergent into the correct compartment in the dispenser drawer, after the prewash has finished. For best results, always use the dispenser drawer for dispensing detergents and liquid additives. Once the dispenser has been filled, close it by pushing it in gently. This is particularly important if you are using 16 132992340.qxd 4/30/03 11:20 AM Pagina 17 (Nero/Process Black pellicola) Washing programmes Type of laundry and symbols on labels 60 Load 40 50 40 30 30 30 Time h/min. 45 2.36 Main wash at 60°-50°-40°30°C 3 rinses Long spin SPIN SPEED NIGHT WASH PREWASH OUTDOOR SPORTS QUICK SUPER RINSE AA40° 0.95 2.5 kg Synthetics 60°-50°-40°30°C Main wash at 60°-50°-40°30°C 3 rinses Short spin SPIN SPEED NIGHT WASH PREWASH OUTDOOR SPORTS QUICK SUPER RINSE AA40° 0.9 56 1.33 2.5 kg Delicates 40°-30°C Main wash at 40°-30°C 3 rinses Short spin NIGHT WASH PREWASH OUTDOOR SPORTS QUICK SUPER RINSE 0.7 53 1.07 2 kg Wool 40°-30°C Main wash at 40°-30°C 3 rinses Short spin SPIN SPEED NIGHT WASH 0.3 48 57 2 kg Hand wash 40°-30°C Main wash at 40°-30°C 3 rinses Short spin SPIN SPEED NIGHT WASH 0.25 46 60 Delicate fabrics: e.g. acrylic fabrics, viscose, polyester, synthetic blends 40 Water litres Cottons 60°-50°-40°30°C Synthetic fabrics and blends: e.g. shirts, blouses, underwear 40 Energy kWh 1.8 Coloured cotton: e.g. shirts, blouses, underwear, towels, household linen 60 Available options SPIN SPEED NIGHT WASH PREWASH OUTDOOR SPORTS QUICK SUPER RINSE AA40° 5 kg 30 Consumption* Main wash at 60°-90°C 3 rinses Long spin White cotton: e.g. sheets, tablecloths, household linen 60 Description of programme Cottons 60°-90°C 5 kg 95 Programme/ temperature Wool (2.27 for (52 for IZ141W-S) IZ141W-S) 42 2.15 (49 for 2.16 for IZ141W-S) IZ141W-S) The “coloured cotton programme” at 60°C is the reference programme for the data entered in the energy label, in compliance with EEC 92/75 standards. * This data is given purely as an indication: the consumption values may vary in relation to the quantity and type of laundry, the temperature of the water supply and the ambient temperature. The data refers to the highest temperature provided for each programme. 17 132992340.qxd 4/30/03 11:20 AM Pagina 18 (Nero/Process Black pellicola) Maintenance and Cleaning Before any maintenance or cleaning is carried out you must DISCONNECT the appliance from the electricity supply. Descaling The water we use normally contains lime. It is a good idea to periodically use a water softening powder in the machine. Do this separately from any laundry washing, and according to the softening powder manufacturer's instructions. This will help to prevent the formation of lime deposits. C0066 C0067 C0068 P1086 After each wash Leave the door open for a while. This helps to prevent mould and stagnant smells forming inside the appliance. Keeping the door open after a wash will also help to preserve the door seal. Cleaning the drawer recess Maintenance Wash Having removed the drawer, use a small brush to clean the recess, ensuring that all washing powder residue is removed from the upper and lower part of the recess. Replace the drawer and run the rinse programme without any clothes in the drum. With the use of low temperature washes it is possible to get a build up of residues inside the drum. We recommend that a maintenance wash be performed on a regular basis. To run a maintenance wash: ● The drum should be empty of laundry. ● Select the hottest cotton wash programme. ● Use a normal measure of detergent, must be a powder (such as Ariel Futur). External cleaning P0038 Clean the exterior cabinet of the appliance with soap and water only, and then dry thoroughly. Cleaning the filter Cleaning the dispenser drawer A clean filter is important for the correct operating of the machine, and should therefore be cleaned after every washing programme. Open the filter door by pulling it towards the right. Place a container under the filter to catch any spillage. The water drain filter The washing powder and additive dispenser drawer should be cleaned regularly. Remove the drawer by pressing the catch downwards and by pulling it out. Flush it out under a tap, to remove any traces of accumulated powder. To aid cleaning, the top part of the additive compartment should be removed. 18 132992340.qxd 4/30/03 11:20 AM Pagina 19 (Nero/Process Black pellicola) Clean the filter using a hard bristle brush. Tighten up the inlet hose. Release the emergency emptying hose, place it in the container, and remove its cap by unscrewing it. P1090 P1062 When no more water comes out, unscrew the filter and remove it. The dangers of freezing If the machine is exposed to temperatures below 0°C, certain precautions should be taken. ● Turn off the water tap. ● Unscrew the inlet hose. ● Place the end of the inlet hose and that of the emergency emptying hose in a bowl placed on the floor and let the water drain out. ● Screw the water inlet hose back on and put the emergency emptying hose back in its place after having screwed the cap on again. When you intend to start the machine up again, make sure that the room temperature is above 0°C. P1061 P1060 Clean the filter under a running tap, then refit it, screwing it fully in. Emergency emptying out If the machine is unable to drain, proceed as follows to empty out the machine: ● Pull out the plug from the power socket. ● Close the water tap. ● If necessary, wait until the water has cooled down. ● Place a bowl on the floor under the filter and place the end of the emergency emptying hose into the bowl. The water should drain by gravity into the bowl. When the bowl is full, screw the cap on again. Empty the bowl. Repeat the procedure until water stops flowing out. ● Clean the filter if necessary. ● At the end screw the filter again. P0040 Put the cap back on the emergency emptying hose, place the latter back in its seat. Close the filter door. Warning When the appliance is in use and depending on the programme selected there can be hot water in the filter. Never remove the filter during a wash cycle, always wait until the appliance has finished the cycle, and is empty. When replacing the filter, ensure it is securely retightened so as to stop leaks and young children being able to remove it. The water inlet filter If your water is very hard or contains traces of lime deposit, the water inlet filter may become clogged. It is therefore a good idea to clean it from time to time. Turn off the water tap. Unscrew the water inlet hose. 19 132992340.qxd 4/30/03 11:20 AM Pagina 20 (Nero/Process Black pellicola) Something Not Working Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer. Before contacting your local Service Force Centre, please carry out the checks listed below. IMPORTANT: if you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or installation, a charge will be made even if the appliance is under guarantee. During machine operation it is possible that one of the following alarm codes appears on the display: - E10 : problem with the water supply - E20 : problem with water draining - E40 : door open Once the problem has been eliminated, press the START/PAUSE button to restart the programme. If after all checks, the problem persists, contact your local Service Force Centre. Symptom Possible causes The machine does not start ● ● ● ● ● ● The machine does not fill ● ● ● ● The machine fills then empties immediately ● ● ● The machine does not empty and/or does not spin ● ● ● ● ● ● There is water on the floor ● ● ● ● ● ● ● Unsatisfactory washing results ● ● ● ● The door has not been closed. (E40) The plug is not properly inserted in the power socket. There is no supply at the socket. The main fuse or the fuse in the plug has blown. The START/PAUSE button has not been depressed. The DELAY option has been selected. The water tap is closed. (E10) The filter in the inlet hose is blocked. (E10) The inlet hose may be squashed or kinked. (E10) The door has not been closed. (E40) The end of the drain hose is too low. The end of the drain hose is submerged in water. There is no vent in the end of the drain hose. The drain hose may be squashed or kinked. (E20) The NIGHT WASH option has been selected. The drain filter may be blocked. (E20) The drain hose extension, if fitted, is not correct. Follow the instructions for connecting to the waste. The drainage system pipes are blocked. The wash load is unbalanced: redistribute the clothes inside the drum to allow the machine to spin. Too much detergent or unsuitable detergent has been used (creates too much foam). Check whether there are any leaks from the inlet hose fittings. It is not always easy to see this as the water runs down the hose; check to see if it is damp. The drain hose may be damaged or not securely positioned. The detergent dispenser drawer or recess is clogged. The drainage system pipes are blocked. The emergency emptying hose has not been plugged. The drain hose has not been screwed fully in. Too little detergent or unsuitable detergent has been used. An insufficient amount of detergent leaves the laundry looking grey and causes lime scale to form. Stubborn stains have not been treated prior to washing The correct wash programme/temperature has not been selected. Too much laundry has been placed in the drum. 20 132992340.qxd 4/30/03 11:20 AM Pagina 21 (Nero/Process Black pellicola) Symptom Possible causes The machine vibrates when spinning ● ● ● ● ● The door will not open The internal packing has not been removed. The machine is in contact with the wall or furniture. The machine is not level and stable (check diagonally). The washing load is badly distributed in the drum. Maybe there is very little laundry in the drum. The water level is above the bottom edge of the door. The machine is heating the water. ● The drum is turning. The door can only be opened when the relevant light has gone out. ● ● Spinning starts late or the machine does not spin ● The electronic unbalance detection device has cut in because the laundry is not evenly distributed in the drum. The laundry is redistributed by reverse rotation of the drum. This may happen several times before the unbalance disappears and normal spinning can resume. If, after 15 minutes, the laundry is still not evenly distributed in the drum, the machine will not spin. In this case, redistribute the load manually and select the spin programme. The machine makes an unusual noise ● The machine is fitted with a type of motor which makes an unusual noise compared with other traditional motors. This new motor ensures a softer start and more even distribution of the laundry in the drum when spinning, as well as increased stability of the machine. No water is visible in the drum ● Machines based on modern technology operate very economically using very little water without affecting performance. Before calling out an engineer, please ensure you have read the details under the heading “Something Not Working”. When you contact the Service Force Centre you will need to give the following details: 1. Your name, address and post code 2. Your telephone number 3. Clear and concise details of fault 4. The model and serial number of the appliance (found on the rating plate - see picture) 5. The purchase date. Service & Spare Parts In the event of your appliance requiring service, or if you wish to purchase spare parts, please contact your local Service Force Centre by telephoning: 0870 5 929929 Your telephone call will be automatically routed to the Service Force Centre covering your post code area. For the address of your local Service Force Centre and further information about Service Force, please visit the website at www.serviceforce.co.uk. For Customer Service in Ireland please contact us at the address below: Zanussi Electrolux Electrolux Group (Irl) Ltd Long Mile Road Dublin 12 Republic of Ireland Please note that a valid purchase receipt or guarantee documentation is required for inguarantee service calls. Mod. .......... Prod. No. ........... Ser. No. ......... Tel: +353 (0)1 4090751 Email: service.eid@electrolux.ie ..... ..... ..... d. No. Mo d. Pro P0042N 21 ..... . . No Ser . ..... .... 132992340.qxd 4/30/03 11:20 AM Pagina 22 (Nero/Process Black pellicola) Customer Care Department Customer Care Department Zanussi Electrolux 55-77 High Street Slough Berkshire SL1 1DZ Tel 08705 727727* For general enquiries concerning your Zanussi Electrolux appliance or for further information on Zanussi Electrolux products, please contact our Customer Care Department by letter or telephone at the address below or visit our website at www.zanussi.co.uk * calls to this number may be recorded for training purposes. Guarantee Conditions Standard guarantee conditions ● We, Zanussi Electrolux, undertake that if, within 12 months of the date of the purchase, this ZANUSSI ELECTROLUX appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our option repair or replace the same FREE OF ANY CHARGE for labour, materials or carriage on condition that: ● The appliance has been correctly installed and used only on the electricity supply stated on the rating plate. ● The appliance has been used for normal domestic purposes only, and in accordance with the manufacturer’s instructions. ● The appliance has not been serviced, maintained, repaired, taken apart or tampered with, by any person not authorised by us. ● All service work under this guarantee must be undertaken by a Service Force Centre. ● Any appliance or defective part replaced shall become the Company’s property. ● This guarantee is in addition to your statutory and other legal rights. Home visits are made between 8.30am and 5.30pm Monday to Friday. Visits may be available outside these hours in which case a premium will be charged. ● European guarantee If you should move to another country within Europe then your guarantee moves with you to your new home subject to the following qualifications: ● The guarantee starts from the date you first purchased your product. ● The guarantee is for the same period and to the same extent for labour and parts as exists in the new country of use for this brand or range of products. ● The guarantee relates to you and cannot be transferred to another user. ● Your new home is within the European Community (EC) or European Free Trade Area. ● The product is installed and used in accordance with our instructions and is only used domestically, i.e. a normal household. ● The product is installed taking into account regulations in your new country. Before you move please contact your nearest Customer Care Centre, listed below, to give them details of your new home. They will then ensure that the local Service Organisation is aware of your move and able to look after you and your appliances. France Senlis +33 (0) 344 62 29 29 Germany Nurnberg +49 (0) 800 234 7378 Italy Pordenone +39 0434 39 4700 Sweden Stockholm +46 (0) 8 672 53 90 UK Slough +44 (0) 1753 219897 Ireland Dublin +353 (0)1 4090751 Exclusions This guarantee does not cover: ● ● Appliances found to be in use within a commercial environment, plus those which are subject to rental agreements. Products of Zanussi Electrolux manufacture which are NOT marketed by Zanussi Electrolux. Damage or calls resulting from transportation, improper use or neglect, the replacement of any light bulbs or removable parts of glass or plastic. Costs incurred for calls to put right an appliance which is improperly installed or calls to appliances outside the United Kingdom. 22 132992340.qxd 4/30/03 11:20 AM Pagina 23 (Nero/Process Black pellicola) Installation Instructions It is dangerous to alter the specifications or attempt to modify this product in any way. Care must be taken to ensure that the appliance does not stand on the electrical supply cable. Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. Any plumbing work required to install this appliance should be carried out by a qualified plumber or competent person. Technical Specifications DIMENSIONS Height Width Depth POWER SUPPLY VOLTAGE TOTAL POWER ABSORBED 85 cm 60 cm 62 cm 230-240 V/50 Hz 2050 W (10A) WATER PRESSURE Minimum Maximum MAX LOAD CAPACITY Cotton, linen Synthetics Delicate fabrics Wool/Hand Wash SPIN SPEED Maximum CONSUMPTION DATA FOR WASHING 5 KG NORMALLY SOILED COTTON ITEMS AT 60°C Energy Water 50 kPa (0.5 bar) 800 kPa (8 bar) 5 kg 2.5 kg 2.5 kg 2 kg 1400 rpm (IZ141 W - IZ 141 S) 1600 rpm (IZ 161 W - IZ 161 S) 0.95 kWh 42 litres (IZ 161W - IZ 161 S) 49 litres (IZ 141 W- IZ 141 S) This appliance complies with the following E.E.C. Directives: - 73/23 EEC of 19.2.73 (Low Voltage Directive) and subsequent modifications; - 89/336 EEC of 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifications. 23 132992340.qxd 4/30/03 11:20 AM Pagina 24 (Nero/Process Black pellicola) Unpacking Set the machine upright and unscrew the remaining rear screw. Slide out the relevant pin. Fill all the holes with the plastic plugs supplied with the instruction booklet. All transit bolts and packing must be removed before using the appliance. You are advised to keep all the packaging for re-use in case the machine is to be transported again. Using a spanner unscrew and remove the two rear bottom screws. Slide out the two plastic pins. Lay the machine gently on its back, making sure that the hoses are not squashed. P1128 P0002 Positioning Install the machine on a flat hard floor. Make sure that air circulation around the machine is not impeded by carpets, rugs etc. Check that the machine does not touch the wall or other kitchen units. Never place cardboard, wood or similar materials under the machine to compensate for any unevenness in the floor. Your new washing machine has been designed to be permanently plumbed in to your home’s water supply and drainage system. However, if this is not possible, it may be connected to a suitable existing tap with the drain hose discharging into a sink. The appliance has an inlet hose, with female 3/4” BSP thread connector. If this connection is not compatible with the plumbing of the existing installation, a variety of connectors are available from good hardware stores and plumbers merchants to suit most domestic plumbing. Any alteration to your existing plumbing must be carried out by a competent person, or qualified plumber. P0001 P1129 Remove the polystyrene block from the bottom of the machine and release the two plastic bags. Very carefully slide out the left polythene bag, removing it towards the right and then downwards. 1 2 3 P1124 P1126 Repeat the operation for the right polythene bag, removing it towards the left and then upwards. Installation on a Suspended Floor Suspended wooden floors are particularly susceptible to vibration. To help prevent vibration we recommend you place a waterproof wood panel, at least 15 mm thick under the appliance, secured to at least 2 floor beams with screws. If possible install the appliance in one of the corners of the room, where the floor is more stable. P1127 Remove the polystyrene base. 24 132992340.qxd 4/30/03 11:20 AM Pagina 25 (Nero/Process Black pellicola) Water drainage Connect the hose to a tap with a 3/4” thread. Do not use, for connection, old hoses that have been used for another appliance. This appliance is designed to be permanently plumbed into your home's water supply and drainage system. The appliance drain hose should hook into a standpipe, the hook in the drain hose is formed using the plastic “U-Piece” supplied. 30 cm (12") Water inlet P1088 Installation should comply with local water authority and building regulations’ requirements. The appliance must be connected to a cold water supply. A minimum water pressure of 50 kPa (0.5 bar) is required for safe operation of the appliance. P1074 The standpipe should have an internal diameter of approximately 38mm (see diagram) thus ensuring there is an air break between the drain hose and standpipe. Min. 30 cm.(12") If you cannot make the cold water connection direct from the rising mains, you may be able to operate the appliance from your cold water storage system. There should be a minimum distance of 5.02m (16.5 ft) between the appliance’s inlet and the bottom of the water storage tank. Set the hose correctly by loosening the ring nut. After positioning the inlet hose, be sure to tighten the ring nut again to prevent leaks. 38 mm.(1/1 2") diameter standpipe P1040 When discharging into a standpipe ensure that the top of the curve in the hose end is no more than 90cm (35.4'') and no less than 60cm (23.6'') above floor level. The upright standpipe should have a minimum length of 30cm (12'') from the bottom of the elbow to the top of the pipe (see diagram). 3 pin Min.60 cm. (23.6") Max. 90 cm.(35.4") P0021 P1039 Make sure that it is designed in such a way, that the end of the drain hose cannot be covered with water. The drain hose may be extended to a maximum of 4 metres. 25 132992340.qxd 4/30/03 11:20 AM Pagina 26 (Nero/Process Black pellicola) Special conditions An additional drain hose and joining piece is available from your local Service Force Centre. The joining piece must have an internal diameter of 18mm. If you intend the drain hose to empty into a sink, make sure that the sink is empty and the plug hole is not blocked. Use the plastic “U-Piece” supplied. If the floor is carpeted or covered with crumbly or soft material, insert a rigid support base under the feet to prevent noise, vibration or displacement. The base should protrude a few centimetres beyond the edges of the machine. Warning The machine should NOT be placed on deep pile carpeting. Note Please ensure that when the appliance is installed it is easily accessible for the engineer in the event of a breakdown. P0022 Important In the interest of the environment Before connecting up the machine to new pipework or to pipework that has not been used for some time, run off a reasonable amount of water to flush out any debris that may have collected in the pipes. Washing machines and dishwashers should be connected to the FOUL drainage system, the water will then be taken to a sewage works for treatment before being discharged safely into a river. It is essential that these appliances are not connected to the surface water drainage system as this water is discharged directly into a river or stream and may cause pollution. If you require any further advice please contact your local water authority. Levelling Level the washing machine by raising or lowering the feet. The feet may be tight to adjust as they incorporate a self locking nut, but the machine MUST be level and stable (check diagonally). P1051 Any necessary adjustment can be made with a spanner. Accurate levelling prevents vibration, noise and displacement of the machine during operation. Some vibration is inevitable, especially if mounted on a wooden floor. Sprung wooden floors are particularly susceptible to vibration. For advice, consult a builder. If possible, always place the machine on a solid floor. SHOWER SINK TOILET BATH WASHING MACHINE BIDET DISHWASHER RAINWATER 'RUN-OFF' FOUL DRAIN SURFACE WATER DRAINS & SEWERS UNTREATED DISCHARGE FOUL SEWERS SEWAGE TREATMENT WORKS TREATED DISCHARGE RIVER P0987 26 RIVER 132992340.qxd 4/30/03 11:21 AM Pagina 27 (Nero/Process Black pellicola) Electrical connection The wire coloured brown must be connected to the terminal marked «L» or coloured red. Upon completion there must be no cut, or stray strands of wire present and the cord clamp must be secure over the outer sheath. Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. WARNING: THIS APPLIANCE MUST BE EARTHED. The manufacturer declines any liability should this safety measure not be observed. WARNING: A cut off plug inserted into a 13 amp socket is a serious safety (shock) hazard. Ensure that the cut off plug is disposed of safely. Before switching on, make sure the electricity supply voltage is the same as that indicated on the appliance’s rating plate. The rating plate is located at the top of the rim of the open door. The power supply cable must be easily accessible after installing the appliance. Mod. .......... Prod. No. ........... Permanent connection Ser. No. ......... ..... ..... ..... d. No. Mo d. Pro ..... . . No Ser . ..... In the case of permanent connection it is necessary that you install a double pole switch between the appliance and the electricity supply (mains), with a minimum gap of 3mm between the switch contacts and of a type suitable for the required load in compliance with the current electrical regulations. The switch must not break the yellow and green earth cable at any point. .... P0042N The appliance is supplied with a 13amp plug fitted. In the event of having to change the fuse in the plug supplied, a 13amp ASTA approved (BS1362/A) fuse must be used. Should the plug need to be replaced for any reason, proceed as described below. The wires in the mains lead are coloured in accordance with the following code: Green and Yellow - Earth Blue - Neutral Brown - Live GREEN & YELLOW 13 A E N L BROWN BLUE P1041 CORD CLAMP The wire coloured green and yellow must be connected to the terminal marked with the letter «E» or by the earth symbol or coloured green and yellow. The wire coloured blue must be connected to the terminal marked «N» or coloured black. 27 132992340.qxd 4/30/03 11:21 AM Pagina 28 (Nero/Process Black pellicola) From the Electrolux Group. The world’s No. 1 choice. The Electrolux Group is the world's largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrolux Group products (such as refrigerators, cookers, washing machines, vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx. USD 14 billion in more than 150 countries around the world. © Electrolux plc 2003
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Create Date : 2003:04:30 09:19:48Z Modify Date : 2003:04:30 11:51:45+02:00 Creator : AdobePS5.dll Version 5.2.1 Page Count : 28 Creation Date : 2003:04:30 09:19:48Z Mod Date : 2003:04:30 11:51:45+02:00 Producer : Acrobat Distiller 5.0 (Windows) Metadata Date : 2003:04:30 11:51:45+02:00 Title : 132992340.qxdEXIF Metadata provided by EXIF.tools